New to time capsule and need help with installing it?

I just bought a new 3tb time capsule and also new to apple routers I want to use this as my new wireless router how do I go about switching this out with my router now. Im using a linskys router now nothing special I think its only a 300Mbps the only problem is that we just had our new house complete and prewired with ethernet connection in every room and a security system that runs off of the router how do I go about switching that set up to the new time capsule? I know if I had to have the company come out to do it they charge a hefty fee which I know its that hard to do the only thing that's stopping me is that set up to the security system I don't want to screw that up???

Three different aspects
1. Set the form up to submit the data (XML or FDF), not the full PDF. You can import the data to the PDF on your end.
2. You can turn on Extended Reader Rights, but then limit the use/users to 500 by the EULA. The applicability of this option depends on your intended application. In a small office, it would be fine. For general web use you would likely exceed the limit and be in violation of the EULA.
3. There may be an e-mail problem, one reason that e-mail is not recommended for form submission (even if the manual discusses it). Again, in a controlled environment like an office it will probably work fine, but in a web setup it is best to use a web script. There are 2 problems with e-mail that both depend on the client system (YOU have no control, but will be blamed in any case). First, the client machine has to be set up as an active MAPI client. Many folks do not have this on. Second, some e-mail clients treat PDFs like text and the result is a corrupt e-mail submission, even if it makes to you.
If you have the possibility of web submission, do it. I suggest only having the form data submitted and not the form.

Similar Messages

New to Photoshop (CS4Ext) and need help with basic loading of images to new folder.

Just purchased CS4Ext and installed it. It's not showing up on my desktop as a quick entry icon. I want to simply load images from a portable hard drive (USB) to a new folder in photoshop so I can review them and begin to select and separate out some of interest to manipulate and share or get ready to print. It 's the most basic help one can need butI'm jut not clear on the workflow steps . Would appreciate someone walking me through the steps .
Thanks much

drmjp2 wrote:
Just purchased CS4Ext and installed it. It's not showing up on my desktop as a quick entry icon.
Let's see… First of all, this is the Photoshop Macintosh forum. Installed applications never, ever show up on your desktop as a "quick entry" icon on a Mac. Are you on a Windows PC maybe?
drmjp2 wrote:
I want to simply load images from a portable hard drive (USB) to a new folder in photoshop so I can review them and begin to select and separate out some of interest to manipulate and share or get ready to print.
Just select them with your mouse in the Finder and drag-copy them into the new folder. Done.

New to Adobe Forms and need help with Submit Email button

I am new to Adobe Forms in Windows. I created a form with a submit email button. When users try to click the button, the message is operation cannot be completed. My test user has Adobe Reader 9 installed. I'm at a loss as to how to resolve the issue. Please assist. TIA!

Three different aspects
1. Set the form up to submit the data (XML or FDF), not the full PDF. You can import the data to the PDF on your end.
2. You can turn on Extended Reader Rights, but then limit the use/users to 500 by the EULA. The applicability of this option depends on your intended application. In a small office, it would be fine. For general web use you would likely exceed the limit and be in violation of the EULA.
3. There may be an e-mail problem, one reason that e-mail is not recommended for form submission (even if the manual discusses it). Again, in a controlled environment like an office it will probably work fine, but in a web setup it is best to use a web script. There are 2 problems with e-mail that both depend on the client system (YOU have no control, but will be blamed in any case). First, the client machine has to be set up as an active MAPI client. Many folks do not have this on. Second, some e-mail clients treat PDFs like text and the result is a corrupt e-mail submission, even if it makes to you.
If you have the possibility of web submission, do it. I suggest only having the form data submitted and not the form.

New to Crystal reports and need help with formula

Post Author: dausa
CA Forum: Formula
I will try to keep this short and sweet.
Data comes from excel sheet and I am doing a outter left join.
The need: IF the status is S or N, then i want it to sum the qty required for each part number.
my formula looks like this; If ({WIP_ORDER.STATUS}) = 'C OR N' Then SUM ({WIP_ORDER.QUANTITY_REQUIRED}, {ORIGINAL_.PART NUMBER})
thanks for any help
dausa

Post Author: Manuel de Kleine
CA Forum: Formula
Dausa,You could use a formula like below:IF ({WIP_ORDER.STATUS}) IN ['C','N']THEN 1ELSE 0Now, you can do a SUM on this formula.

New to pl/sql and need help with procedure

Hello there, I got two tables STAFF and BONUS which are not related by any constraints
STAFF
ID_NUMBER HIREDATE SALARY BONUS
100020 12-MAY-03 13600
100021 04-NOV-01 30000
100022 08-APR-02 28000
100023 08-APR-02 24000
BONUS
PERCENTAGE MORE_THAN_YEARS
0.1 3
0.15 5
0.3 7
0.45 9
0.5 12
I am trying to create a procedure that would calculate bonus based on years of employment according to bonus table.
If employees sysdate -hiredate is greater than 5, he would get salary*0.15%....
I created this procedure, but I got stuck here.
I calculated the length of employment for every soldier using cursor in a loop, but I don't know how to get values from bonus table and connect them together.
Please help me!
create or replace
procedure bonus_staff
as
cursor c1 is select *from staff;
bon real;
begin
FOR ITEM IN C1
LOOP
bon := FLOOR(months_BETWEEN(SYSDATE,ITEM.hiredate)/12)*
update staff
set bonus = bon
where id_number = ITEM.id_number;
exit when c1%notfound;
end loop;
end;
Thanks in advance..

update staff
set bonus = (select percentage
from bonus
where more_than_years = (select max(more_than_years)
from bonus
where more_than_years <= FLOOR(months_BETWEEN(SYSDATE,staff.hiredate)/12)
You can do this in pure SQL, which operates on a set, so no PL/SQL is required.
Sybrand Bakker
Senior Oracle DBA

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

I have replaced my airport extreme with a new airport time capsule and want to know how I can set up my extreme to extend/strengthen my Wi-Fi?

Start with a "hard reset" (see below) then use AirPort Utility to configure it.
When asked what you want to do with it, indicate that you want it to add to an existing network, similar to the following screenshot.
Follow the prompts that will eventually lead you to the words "wirelessly extend..." as shown.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

I am setting up new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resetting and unplugging. How do I fix this?

I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets

I need help setting up my new AirPort Time Capsule and IMac. I keep getting a flashing amber light. I've tried all the resets

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

I had to put my computer by together without migration or time machine I NEED help with order of the files?

I had to put my computer by together without migration or time machine I NEED help with order of the files?

Hi, where are these other files exactly?

Installing Elements 11 on Mac. Need help with install error "Setup wants to make changes."

Installing Elements 11 on Mac 10.8.2. Need help with install error: Setup wants to make changes. Type your password to allow this." After entering Adobe password, nothing happens. Locked from further installation. Any ideas? Adobe phone support could not help.

Just before letting changes (installation in this case) be made on the system, Mac OS prompts for password & this has to be the Mac system password. This password prompt is the system's own native prompt & would accept the system password only. Please make sure it is the right system password (all/admin rights) and the installaion should run.

I accidentally uninstalled my WLAN on my notebook and need help re-installing it.

I have a HP Pavilion dv9925nr and need help re-installing the WLAN. Please help!

Hello,
This unit came with VIsta and here is a driver for this unit.
its either going to be the Broadcom
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-66350-1&cc=us&dlc=en&lc=en&...=
Or intel driver
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-66349-1&cc=us&dlc=en&lc=en&...=
I am an HP employee.
"Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button or mark the post that solved your problem as the Accepted Solution. Thanks!"

Urgent: im new and need help with this task!

I need help with converting the pseudo code to java code, Any help will b greatly appreciated!
// Declare a variable of type int, called "choice".
// Generate a random number between 0 inclusive and 7
// exclusive, and store that number into the variable
// "choice". (How do you generate a random number? Use the
// nextInt(int) method inside the random object, which takes
// a single int parameter. You can read about this method
// here:
// http://java.sun.com/j2se/1.5.0/docs/api/java/util/Random.html
// If "choice" is equal to 0, then create and return a new
// IBlock object, passing "game" as the parameter to IBlock's
// constructor.
// Otherwise, if "choice" is equal to 1, then create and
// return a new TBlock object, passing "game" as the
// parameter.
// Otherwise, if "choice" is equal to 2, then create and
// return a new OBlock object, passing "game" as the
// parameter.
// Otherwise, .... etc ....
// (please continue to do this for all of the 7 kinds of block
// that can be created)

import java.util.*;
public class Echo{
     public static void main(String[] args)     {
          //System.out.println("enter ur choice");
Random r=new Random();
int choice=r.nextInt(6);
     switch(choice)
     case 0:
          IBlock object0=new IBlock("games");
          break;
     case 1:
          TBlock object1=new TBlock("games");
          break;
     case 2:
          OBlock object2=new OBlock("games");
          break;
     case 3:
          LBlock object3=new LBlock("games");
          break;
     case 4:
          JBlock object4=new JBlock("games");
          break;
     case 5:
          SBlock object5=new SBlock("games");
          break;
     case 6:
          ZBlock object6=new ZBlock("games");
          break;
class TBlock
     TBlock(String s)
          System.out.print("TBlock called"+"\n value passed is "+s);
class IBlock
     IBlock(String s)
          System.out.print("IBlock called"+"\n value passed is "+s);
class JBlock
     JBlock(String s)
          System.out.print("JBlock called"+"\n value passed is "+s);
class OBlock
     OBlock(String s)
          System.out.print("OBlock called"+"\n value passed is "+s);
class LBlock
     LBlock(String s)
          System.out.print("LBlock called"+"\n value passed is "+s);
class SBlock
     SBlock(String s)
          System.out.print("SBlock called"+"\n value passed is "+s);
class ZBlock
     ZBlock(String s)
          System.out.print("ZBlock called"+"\n value passed is "+s);
}

New Airport Time Capsule Dropping Wifi/Internet with 7.7.1

Last week I bought a new Airport 2TB Time Capsule and had everything up and running within minutes. However, less than 24 hours later, the wifi signal started dropping devices all around the house. It started with the AppleTV, and eventually dropped our iPhones and iPad as well. The problem is one I've seen on these forums before (however, not with this new model).
I since exchanged it, and the new model is having the identical issues.
Basically, the problem is 1 of 3 things:
1. You'll look down at your iPhone (or whatever device that is wirelessly connected), and see a full wifi signal. However, you'll have lost access to the Internet. Using the AirPort app won't find the Airport Time Capsule. Sometimes turning off wifi on the iPhone and turning it back on fixes the issue, sometimes the Airport Time Capsule needs to be restarted.
2. The AirPort Time Capsule stops broadcasting SSID at random intervals. Even when standing right next to it, there is no way to join the network.
3. The Internet connection drops in the middle of a browsing session (usually while using an iPhone).
On both devices (the original new one, and the replacement exchange), I immediately ran the firmware update. So, I'm thinking this could be a firmware issue.
This router replaces a Linksys e3000 that was working flawlessly. It's connected to a Cox Cable Cisco DOCSIS 3.0 modem (modem only, no router). The AirPort Time Capsule runs in WPA2 protected mode. It's running DHCP and NAT, and 2.4 and 5ghz are currently running the same network name (although I've tried separating them to no effect).
I am at my wits end. I find it hard to believe that both of these routers are defective. And I also find it hard to believe that I'm doing something wrong in the setup of this simple device, considering I've been working with all kinds of very complicated routers for over a decade without this kind of problem.
So I come to you, community, for help!
Thank you in advance!

I don't have one.. but your testing is conclusive.. the TC is not stable on this firmware.. Apple will no doubt fix it .. I think their secrecy in marketing leads to less than adequate testing.. you are expecting to buy a mature product.. remember this is a ground breaker.. this is the first all new design since Gen1 TC.. all previous models used Maxell processor and chipset.. albeit with various wireless cards.. now it is broadcom.. processor and wireless.. this also runs apple written firmware.
Broadcom OEM firmware.(linux and hence open source) supplied to all manufacturers of products based on the chipset.. well that would be just wrong for apple... it has to be done in NETBSD,, so it is not open source.. the very thought.. open source.. . that would give everyone access to controls apple don't want you to have.. http setup even.. couldn't allow that.. so apple have to write the firmware from scratch and to match all those apple protocols. Hence where they are now now.
And your role is beta tester.. didn't you know.
Return it and stick with your Linksys (broadcom, Linux open source) until Gen 6 TC comes out.
Unless you like the bleeding edge.

Time Capsule and SLOW bandwidth with Verizon FIOS?????

Ok I have had verizon FIOS and my time capsule for almost 3 years. All running latest firmware updates (which might be the problem with the TC). For the last couple years it has been a blazing fast setup and I have a ps3, imac, macbook pro, apple tv, iphone, ipad, etc all hooked up to my network.
Then 5 days ago I buy a new Imac and the firmware update for the TC. Now the bandwidth in my house has dropped to crap. I have directly connected to the FIOS router with ethernet and its like 20 megs per second down and10 up, but when I connect my time capsule back up and go from there it is like 4 down and 3 up? It was NEVER like this before....any ideas or suggestions?

Welcome to the discussion area!
Things were fine before two changes occurred on your network. So, it might be logical to try to isolate one thing or the other to arrive at a possible cause for your network slowdown.
You need to completely power cycle the entire network after you make any change on a network, whether that be adding a new device (the iMac) or making another change (the firmware update).
Power everything off...modem, routers, computers, consoles, printers, etc., the order is not important. Wait 5 minutes. Then power up your modem first and let it run for 5 minutes by itself. Power up the next device connected to the modem (probably your Time Capsule) the same way. Power up the next device the same way, etc. until everything is powered back up.
What are your results?
If things are still slow, remove one of the things that you changed on your network...the iMac...by powering it off, restarting your network again (the extended power off above is not necessary) and then checking the network again.
Any change?
If no change on the iMac test, then the other variable on your network is the firmware update. It's unlikely...+but possible+...that the firmware update changed something in the interaction between your Time Capsule and FIOS router, so something is not functioning quite correctly. Things like this can happen with firmware updates because while Apple knows what works among their own products; they cannot know what works in every instance when another product interfaces with one of of theirs.
It should be possible to rollback the firmware on your Time Capsule to the previous version if you want to try that approach. There's no guarantee of course, that this will help either. Post back if you want to try this.

I have just bought an airport time capsule and im trying to install an airport utility. I tried the 6 version but it wd not load because it said might mac would not support. I then tried the 5.6.1. and it said it would not work with airport capsule.

I have just bought an airport time capsule and i am trying to install an airport utility programme to support this
However, it seems the version 6 which came out last year - i can't use on my Mac - Snow Leopard -
So tried to then install version 5.6.1 and although this installed properly, it says this will not support my capsule
2. I have BT home hub 2. I presume I cannot bypass this as the internet router? I bought the time capsule for its capability to back up . The router was a byproduct. But am I correct in thinking that it acts as a secondary router or a booster rather than a primary router . I still need the BT homehub?
if anyone can help that would be great
CS J

You should either return the Time Capsule or upgrade your Mac at least to OS X 10.7.

New to time capsule and need help with installing it?

Similar Messages

Maybe you are looking for