New to weblogic - cannot get examples working

I am new to weblogic; working under RH Linux Fedora 2.
I tried to follow the examples.html instructions to create a new sideline copy of the source. The instructions do not match the layout of the samples/ directories. The instructions for config.xml say to leave 3 <Application>s in place and remove the rest; there are only 2 of the 3 in the original config.xml. When I try to start the examples using the startExamplesServer.sh (edited per the directions), the startup hangs at the <Notice>...starting weblogic admin server .... message.
Can anyone recommend how to get a foothold in this process? I have spent almost a week trying to get anything working, including trying to create a new server within the examples domain (so I can try things without disturbing the original source). I created a server in the console (on port 7701 rather than 7001, to allow others to run the 7001 server), and that failed with an error. (I found two posts regarding the error - but no replies to either).
Thanks for any direction in helping me make some progress!

I am guessing that your config.xml is not quite right. You can either send it to me or post it here and I will review it.
Another suggestion is to install WebLogic Server in a different bea home...and play with the examples right out of the box so that you don't have to fiddle around the scripts at this point.
The samples paths you see in examples.html are for windows. Maybe that's why they don't match up with your Linux directories verbatum.

Similar Messages

  • Have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lis

    have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lists be printed

    Hello, Edward and thank you for your note.
    I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
    After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
    I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
    I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
    Regards,
    Mike

  • HT1369 I have a new iPod and cannot get my music loaded on to it. The computer says it's not connected, and then it says it is synced but there's still no mucis on it.

    I have a new iPod and cannot get my music loaded on to it. The computer says it's not connected, and then it says it is synced but there's still no mucis on it.

    If that's not a real email, you need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (99730)

  • New instant message has old message that reappears every time I select new message.  Cannot get rid of it.

    Iphone 4 new instant message screen has old message that reappears every time I select new message.  Cannot get rid of it. Any known solution?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • Question: I cannot start my iPhone 4. It just "died". I connected it ti my Mac, but tha Mac doesn´t recognise it. Any ideas how to wake the phone.The battery is fine, I just cannot get it working!

    Question: I cannot start my iPhone 4. It just "died". I connected it ti my Mac, but tha Mac doesn´t recognise it. Any ideas how to wake the phone.The battery is fine, I just cannot get it working!

    See Here for
    Frozen or unresponsive iPhone
    Try this first... You will not lose any Data...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    If that does not work... try letting the battery fully drain.
    Then Charge for an Hour and try the suggestions again.

  • TS3999 I have a new imac and cannot get my ical to show up on the new imac via icloud.  Every time i go to system preferences and activate the calender it freezes.  I have restarted the computer mutiple times.

    I have a new imac and cannot get the ical to show all of my calenders.  I have gone to system prefrences and clicked the calendar setting and it freezes and i have to force quit.  I have restarted the computer multiple times.  Any suggestions?

    Hello JETaylor2015,
    Congratulations on your new iPod nano!  I would be concerned too if my iPod was not recognized by iTunes or my computer.  I recommend reviewing this article for steps to take when your iPod is not recognized:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • New quad G5 - cannot get sound to work

    I have a new quad G5 and cannot get the sound to work. Does it require external speakers or is it defective?
    The Apple rep didn't tell me I would need to purchase speakers and every other mac tower I have owned has had an internal speaker.
    Any info would be appreciated.
    Thanks.
    Rebecca
    g5 quad   Mac OS X (10.4.6)  

    Yeah, there needs to be an option for 'Internal Speakers' port 'Built-in Output' in order to use the internal speakers.
    I can't remember if this is available on my quad [am at work now on an imac ... any way to check what the options are from the command line? ].
    If it is not present, you should probably contact apple support.

  • HP Photosmart C4580 Wireless - cannot get to work

    I just had to get a new computer and new printer.  While I was at it, I established a wireless network.  I am running Windows Vista 64-bit on the new computer (Gateway) and have an HP Photosmart C4580 printer with wireless capabilities.  I cannot get the printer to work consistently.  Everytime I reinstall it, it works fine until either it or the computer goes to sleep or shuts down.  Then it doesn't work anymore.  Reinstall...it works...sleep, it stops working...vicious cycle.
    I have spent HOURS with HP Chat trying to fix this, and even more time trying to find a solution myself.  This is my first HP product and I must say that I'm about at my wit's end with it.  I find it hard to believe that I am the only one on earth with a similar problem, yet I can find no help anywhere.  I'm sure that I'm doing something wrong, but I don't have enough experience to figure it out and cannot seem to find anyone who does.
    I would appreciate any help I can get at this point.  This is my last resort before I give up and go back to Dell!!!
    This question was solved.
    View Solution.

    I have a couple of questions and some suggestions:
    Is the IP address of the printer, the computer or both changing over time?
    I recommend setting a DHCP reservation for the computer and the printer.  Log on to your wireless-router, look for LAN setup, address reservation.  You should see a list of clients connected to the wireless-router.  Set reservations for at least the printer and the computer.
    Uninstall the SW (sorry about this) and reinstall.
    With the IP address of the computer and the printer now fixed, the SW shouldn't have any trouble finding the printer when it wakes from sleep (I hope).
    BTW -- unless you're using a very inexpensive surge protector, the printer should be fine connected to it.   I think the advice to plug the printer directly into the wall as a way to fix SW problems is quite interesting.
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • Messages (that came w Moutain Lion) will not deliver my messages anymore - cannot get it work.  Anyone else having this issue?

    Messages (the old iChat) was working great when I first downladed Mountain Lion.  Since a few days ago, I cannot get messages to send any messages on my MacBook Pro and it won't send some messages on my iPhone (some work, some don't).  I have tried quitting the program and restarting it, I have tried restarting the computer.  I've gone into preferences and cannot find anything in there to change or fix...I'm at a loss as to why this is happening.  Anyone w/ any ideas or help would be greatly appreciated!! 

    My problem is somewhat similar. I just replaced my iMac with a Retina MBP, and mostly everything migrated (except for a couple apps like XCode) and it's running fine, pretty much identical to the iMac. Messages was working fine on iMac (both have Mountain Lion latest update), and I'm getting all my messages fine on the RMBP, but every message I send errors out and resending errors out, haven't been able to get one delivered since I switched. 
    Is there any way to debug what is causing the time out error? I'm logged into my accounts properly, have restarted messages several times, turned off the original iMac in case of error, etc.
    Edit: But I didn't reboot my RMBP, and of course, guess what? That fixed it. '
    My guess is that because I had the iMac still running on the same network as sort of a twin to the new computer, it might have caused some sort of confusion that wasn't worked out until I restarted fresh with the iMac off. You would think that would only cause problems with recieving, not sending, but that's my theory.

  • New to Java - cannot get computer to compile?

    Hi
    I'm from UK, although I've used one for ages I am new to computing itself and very new to programming - in fact I haven't started yet because I cannot get my JDK to work!! I have downloaded it successfully, it is installed and I have verified the version from athe command prompt. I have written a programme as detailed in my Programming with Java book, and saved it with a java file extension and I am sure it is correct. But when I try to compile mit I get "'javac' is not recognised as an internal or external command, operable program or batch file"
    My book has no further advice on what to do - can anyone on this site offer me any help please.
    Thanks

    Make sure the path to the javac.exe is specified in the environment CLASSPATH, otherwise you'll have to instruct your command window to point to the java/bin directory every time you wish to compile something... Not fun... :P
    After that, just follow the instructions pointed at the tutorial...
    Check out the installation doc at http://java.sun.com/j2se/1.5.0/install-windows.html , specifically, the heading: 5. Update the PATH variable (Optional)
    If you're new to java, I recommend getting an IDE to simplify things: www.jcreator.com is nice and free, try it out... ;)

  • Cannot get Ethernet work on my MBP991

    hi:
    Sorry, I created this new topic since I still could not find any relevant solutions to my problem that I cannot get my Ethernet connection work on my Mac Book Pro 991 which was bought a month a ago, after searching for a couple of similar discussion. None of them seemed working for me. My problem is when I plug a Ethernet cable ( Cat-5) to the port, I cannot see it ever becomes active ,just keeping inactive for the Link status (showing " Cable Unplugged") from either "ifconfig en0" or "Network" preference dialog. I've done the following trials :
    1. delete "SystemConfigurations" and restore the default ones. Not work
    2. set the service order ,put Ethernet to the first while turning off Airport .not work
    3. manually set Ethernet to "10base" "100base" and "1000base" to see if it works from one of them. not work
    Since the router is within the neighbors' room , I cannot see if the led is light in the router for the port connecting the cable ,but I'm sure the cable works just fine with my another PC. And I checked kernel log and system log, no foundings. Because I'm current in the trip ,I might turn to Apple Store for more support ,but I'd like to know what might be the cause for such problem ,driver issue?
    Btw, I'm running on OS X 10.6.1 ,with no issue found in latest Apple Hardware Test and I'm not doing PMU/PRAM reset since I feel that should not work as well.
    Nevo

    Try a new cable.

  • I recently bought a new computer and cannot get my ipod to sync from this computer.  My purchased songs are also not on iTunes anymore?  How can I fix this?

    I recently bought a new computer and I cannot get it to sync with my iPod.  I also cannot see my purchased songs in iTunes on my new computer?  I'm not sure how to fix this.

    follow the steps given here...
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Cannot get NDES working on Server 2012 R2 at all.

    I absolutely cannot get this to work. I simply cannot figure out what I am either doing wrong or missing.
    Neither site works and in the event log I get the following:
    The Network Device Enrollment Service cannot retrieve one of its required certificates (0x80070057).
    The Network Device Enrollment Service cannot be started (0x80070057).
    It seems like I've read every site on this and tried everything but simply cant make it work. Have not tried on 2008 r2. Below is what I have done if someone can help me I would be grateful.
    I tried adding more permissions than needed on local machine certs, templates, and domain level as well
    Tried the http://support.microsoft.com/kb/2800975 where you move the ExtensionlessUrlHandler-ISAPI-4.0_64bit below
    the static file.
    I tried using and not using the use local profile in IIS for the SCEP pool
    Both the ndesservice acccount and admin account have full control on everything.
    I also tried to leave the default settings in the reg for the templates.
    This is the NDES log out put when turned on:
    ========================================================================
    402.534.948: Begin: 7/23/2014 4:01 PM 32.507s
    402.539.0: taskhost.exe
    402.543.0: GMT - 5.00
    2005.220.0: certca.dll: 6.3:9600.16384 retail
    2005.220.0: certenroll.dll: 6.3:9600.16384 retail
    2004.621.0:<2014/7/23, 16:01:32>: 0x80070005 (WIN32: 5 ERROR_ACCESS_DENIED)
    2004.642.0:<2014/7/23, 16:01:32>: 0x80070006 (WIN32: 6 ERROR_INVALID_HANDLE)
    402.379.949: End: 7/23/2014 4:01 PM 32.585s
    402.534.948: Begin: 7/24/2014 2:31 PM 03.904s
    402.539.0: taskhost.exe
    402.543.0: GMT - 5.00
    2005.220.0: certca.dll: 6.3:9600.16384 retail
    2005.220.0: certenroll.dll: 6.3:9600.16384 retail
    2004.621.0:<2014/7/24, 14:31:3>: 0x80070005 (WIN32: 5 ERROR_ACCESS_DENIED)
    2004.642.0:<2014/7/24, 14:31:6>: 0x80070006 (WIN32: 6 ERROR_INVALID_HANDLE)
    402.379.949: End: 7/24/2014 2:31 PM 06.122s
    EVENT LOG
    HTTP Error 500.0 - Internal Server Error
    Detailed Error Information:
    Module   IsapiModule
    Notification   ExecuteRequestHandler
    Handler   ISAPI-dll     Error Code   0x80070057
    Requested URL
       http://localhost:80/certsrv/mscep_admin/mscep.dll
    Physical Path
       C:\Windows\system32\CertSrv\mscep\mscep.dll
    Logon Method   Negotiate
    Logon User   FARAWAY\NdesService
    INSTALL STEPS
    SETUP DOMAIN ACCTS:
    Created Domain acct ndesservice (added to ndes server admin group and IIS group)
    Created Domain acct ndesadmin (added to Enterprise Admins and ndes server admin group)
    Ndes Server Profile Added
    -Logged on as ndesservice account so profile is created on ndes server
    DOMAIN CA (Server 2008 r2)
    -Applied kb2483564 to 2008 r2 domain CA
    -Duplicated (Exchange Enrollment Agent (Offline request),Cep Encryption,IPSec (Offline request) templates)
     Added ndesservice, ndesadmin, and ndes server with read and enroll on all three
    -All three cer copies prefixed with ndes
    -Issued Certs
    -CA properties (added ndesservice account and ndes machine acct read and request)
    -Added ndesservice account to local admin group
    Set SPN for ndesservice domain account
    -setspn –s http/gimli.faraway.com faraway\NdesService)
    NDES SERVER (Server 2012 R2)
    Installed NDES under CA Role using ndesadmin account (member of enterprrise admins group)
    -Added Request Filtering in IIS (tried with adding and without)
    -Added .Net extensability options (tried with adding and without)
    Post Deployment on NDES Server
    -set creds to configure role services to faraway\ndesadmin
    -Set service account to faraway\ndesservice
    -Set ca to pippin.faraway.com\farway (it picked this up automatically)
    -Entered cert info left keys at defualt of 2048
    NDES Server Registry changes
    -HKLM\Software\Microsoft\Cryptography\MSCEP (changed templates from default of IPSECIntermediateOffline to NDESIPSECIntermediateOffline
     also tried the template name NDESIPSec(Offlinerequest) from the copy
    -Added faraway\ndesservice account full control of MSCEP and below
    -HKLM\Software\Microsoft\Cryptography\MSCEP\EnforcePassword  (change from 1 to 0)
    Ndes Server IIS applicattion Pool Identity
    -IIS SCEP App pool set Load User profile from false to true
    NDES Server Certificates
    There were two Certs created when the role was installed in the machines personal store. I dont think I am supposed to do anything here other than add permissions?
    -Added ndesservice account and machine account with full control
    Both the CA and NDES server have been restarted multiple time. Am I doing this right and missing something in IIS 8.5? I Hope I provided enough info.

    Learning a lot lol. Never had to do either IIS tracing or capi logging. Turned it on.
    This is the log
    Level
    Date and Time
    Event ID
    Task Category
    Information
    7/25/2014 12:25
    81
    Verify Trust
    Information
    7/25/2014 12:25
    90
    X509 Objects
    Information
    7/25/2014 12:25
    30
    Verify Chain Policy
    Information
    7/25/2014 12:25
    11
    Build Chain
    Information
    7/25/2014 12:25
    41
    Verify Revocation
    Information
    7/25/2014 12:25
    40
    Verify Revocation
    Information
    7/25/2014 12:25
    41
    Verify Revocation
    Information
    7/25/2014 12:25
    51
    Retrieve Object from Cache
    Information
    7/25/2014 12:25
    50
    Retrieve Object from Cache
    Information
    7/25/2014 12:25
    40
    Verify Revocation
    Information
    7/25/2014 12:25
    10
    Build Chain
    Information
    7/25/2014 12:25
    80
    Verify Trust
    Error
    7/25/2014 12:24
    30
    Verify Chain Policy
    Error
    7/25/2014 12:24
    11
    Build Chain
    Information
    7/25/2014 12:24
    90
    X509 Objects
    Information
    7/25/2014 12:24
    41
    Verify Revocation
    Information
    7/25/2014 12:24
    40
    Verify Revocation
    Error
    7/25/2014 12:24
    41
    Verify Revocation
    Error
    7/25/2014 12:24
    42
    Reject Revocation Information
    Error
    7/25/2014 12:24
    42
    Reject Revocation Information
    Information
    7/25/2014 12:24
    51
    Retrieve Object from Cache
    Information
    7/25/2014 12:24
    50
    Retrieve Object from Cache
    Information
    7/25/2014 12:24
    40
    Verify Revocation
    Information
    7/25/2014 12:24
    10
    Build Chain
    Information
    7/25/2014 12:24
    70
    Acquire Certificate Private Key
    Information
    7/25/2014 12:24
    90
    X509 Objects
    Error
    7/25/2014 12:24
    30
    Verify Chain Policy
    Error
    7/25/2014 12:24
    11
    Build Chain
    Information
    7/25/2014 12:24
    90
    X509 Objects
    Information
    7/25/2014 12:24
    41
    Verify Revocation
    Information
    7/25/2014 12:24
    40
    Verify Revocation
    Error
    7/25/2014 12:24
    41
    Verify Revocation
    Error
    7/25/2014 12:24
    53
    Retrieve Object from Network
    Information
    7/25/2014 12:24
    52
    Retrieve Object from Network
    Error
    7/25/2014 12:24
    42
    Reject Revocation Information
    Information
    7/25/2014 12:24
    53
    Retrieve Object from Network
    Information
    7/25/2014 12:24
    52
    Retrieve Object from Network
    Error
    7/25/2014 12:24
    42
    Reject Revocation Information
    Information
    7/25/2014 12:24
    51
    Retrieve Object from Cache
    Information
    7/25/2014 12:24
    50
    Retrieve Object from Cache
    Information
    7/25/2014 12:24
    40
    Verify Revocation
    Information
    7/25/2014 12:24
    10
    Build Chain
    Information
    7/25/2014 12:24
    70
    Acquire Certificate Private Key
    Information
    7/25/2014 12:24
    90
    X509 Objects

  • Satellite Pro A200 PSAE1E: Cannot get hotkeys working on Win XP

    Hi,
    I have a Satellite Pro A200 PSAE1E which came with Vista on it, I have reinstalled it with Win XP Pro installed the relevant drivers from the Toshiba download page but cannot get the hot keys working.
    I have installed the controls and control driver but this does not seem to work. Have seen a posting about 'common module' somewhere but can't seem to find any links to download it on the download page.
    Can anybody help?
    Many thanks
    Iain

    The Controls utility and the Controls driver allow you to customize and preset TOSHIBA special button settings. But these are not a FN keys!!!
    You need to install the Hotkey Utility if you want to use the FN keys.
    Further hint:
    Its important that all Toshiba drivers and Utilities are installed in the right order.
    On the Toshiba driver page you will find a txt file called installation instruction.
    Please install all the drivers and tools in the order mentioned in this instruction!
    Greetings

  • BCM4318 Cannot get to work on Acer Aspire 5100

    Ok so I just installed Arch on my Aspire 5100 and it has a PCI BCM4318 Wireless LAN card.  I cannot get it to work or find networks with ndiswrapper or anything.  I am using gnome and it keeps telling me I don't have the firmware installed when I followed every possible guide for the card.  Also, I can't get any other user accounts I've made to work with startx, and I'm doing a big no no by using starx with root.

    You might want to check if you somehow ended up with your files at $HOME being owned by root. This might prevent you from starting X.
    As for the wireless driver, I have no idea, sorry.

Maybe you are looking for

  • HP LaserJet 1012 - Wireless from Mac to PC

    Hi all, Here's my situation: I have a desktop PC running Vista that my HP Laserjet 1012 is connected to - works fine. Wired connection to Linksys WRT54G. I have a MBP 2.33GHZ C2D connected wirelessly to the WRT54G. I would like to be able to print wi

  • My airport extreme appears to be connected...

    to our home router.  Light is green.  Nothing we plug into the Extreme can connect to the internet?  How do I correct?  Thanks,

  • Issue with group by expression when using non-regular columns

    Hi all, Please help me out to find a solution for this issue. In case i need to group the values where one of the columns is not a regular column. How can i fix the issue? I tried the possibility of using the alias name, from clause query but still c

  • Do I have Shockwave player?

    Ok stupid question, but Do I have Shockwave player? I don't ever recall installing it nor do I want it but some odd things make me wonder if I have it If I do, then I haven't updated it and that concerns me. When I look in these location, I do not fi

  • Lightroom CC Crashes/Fails to Launch after Installation

    Yesterday, I downloaded and installed Lightroom CC. Launching the program produced an immediate crash with no error message. I tried the fixes posted elsewhere on this forum without success. Subsequently, I contacted Adobe Support via Live Chat. The