New user status profile applied to existing transactions

Hello experts,
We have been live for nearly a year and a half with CRM service 5.0 and are now preparing to upgrade to 2007. A new requirement to manage transaction item status through authorizations (B_USERSTAT) has been introduced at contract item level. We have tens of thousands of existing line items in production, but a user status was never maintained for the associated item categories.
We can apply a new status profile to the relevant item category, but that seems to only be enabled in new transactions, not existing ones. Existing transactions are therefore not relevant for the new authorization settings in B_USERSTAT authorization object.
Does anyone know of a utility or means by which we can "refresh" existing business transactional data to reflect the new user status profile?
Your assistance is appreciated.
Allon

Hi  robert,
I have requirement lilke this. In my case, i removed an existing user status 'Open' from the status profile for service ticket. it is reflecting in my new creating tickets..But existing all tickets have same status profiles (i.e) 'Open' is still there.. How to update the existing records???
regards
Logu

Similar Messages

  • User status Profiles - Add new status

    Hi Experts,
    We're working in cProjects 4.0, and we want to customize the status profile for some objects in the project, trying to add a new status "in evaluation" between standard status "release" and "completed".
    It is very important that you <b>cannot change to this status unless the item is released</b>. And we want to define that you can come back to the status only from defined statuses.
    We tried to define that under customizing point "Create/Change User Status Profile" but we don't get to have the discrimination criteria just mentioned above.
    Any help/hints on this?
    Thanks in advance!!
    Kind Regards,
    Isabel

    Isabel,
       You should be able to accomplish this by setting them as below. You could set up the influence like the below  
    Created /initial - System status REL Disallowed
    Released/Initial - System status Completed Disallowed
    Released /inEvaluation - System status Completed Disallowed
    Completed /InEvaluation - System status Completed allowed or No restriction
      and set the Next action to No action.
       By setting them as above When you are in create system status, you can only have the created/Initial User status active. In order to release the object the user will have to propogate to the Released /initial user status .
      After the system status Release has been set, depending on the completion of your activity you can set the released/inevaluation user status.Only after you set this status can set the system status to complete.
      Hope this helps.
    Thanks
    Narasimhan

  • How to create a user new user status as closed for aWBS element

    Hi,
    Can any one explain me the process of how to create a new user status '' Closed'' for the WBS element which when trying to close has error and are not able to close. So can we create a new status inroder to close the WBs element
    Thanks nd Regards
    Sri

    Hello Srihari,
    Use OK02 transaction to create a status profile. You can create a new user status in the status profile.
    If you already have a status profile which is maintained in the master data, then you can create a new user status as closed to that status profile.
    Hope this will help you..
    Regards,
    Praisty

  • How to add new user status in Solman

    Hello,
    I wanted to add a new user status in Solman.i have added one new user status " reopen" . but when i checed it is showing as "no status".
    I have also checked the table TJ30T, in this table we have 2 entry for all other user status one is in english and one is in german.
    Please let me know how to add entry in this table or is there any other ways to add new user status in solman.
    Regards,
    Bhavesh

    Hi Abhyankar,
    Explain the scenario where you want to create a new user status?
    General remark:
    Creation of new user status can be for 2 cases: Whether you want the status to show up in the status field or you want to only use the status to search corrections and the status is displayed in "Further Statuses" tab.
    If you want to use the new user status for searching the corrections and this user status will be manually set, then you need to create the status in CRMBS02 transaction without specifying any status numbers.
    Then the new status will be available in "Further statuses" tab and you need to manually set or unset the status.
    If you need your user status to reflect in the status field then you've perform the following actions in SPRO:
    1. Create Authorization key for the new status
    2. Create the new status with status number and order of visibility; assign the authorization key to the status
    3. Create the action which will set the status
    4. Add the action in the action profile
    5. Write the schedule condition required
    These steps are on a high level. Hope this helps you to decide.
    Regards,
    Sameer

  • CHARM how to add new user status to change document

    Can someone please suggest how to add a new user status to a change document ?
    I am looking into adding status "Pending" to Admin correction SDAD.
    Thank you in advance
    Elena

    Hello,
    Asides from the obvious adding of a new status to status profile SDADHEAD, you may want to have a look at the SPRO activities:
    SAP Solution Manager
    -> Scenario-Specific Settings
      -> Change Request Management
       -> Extended Configuration
        -> Change Request Management
         -> Change Transaction
          -> Change Transaction Types
            o Define Status Attributes
    Also activity "Make Settings for Change Transaction Types" in the same path is important.
    Best regards,
    Miguel Ariñ

  • User status profile settings on WBS not working

    Hello,
    We have a User status profile on WBS element which has various statuses in it allowing different business transactions when that particular user status is set.
    There is one user status NPC in that status profile which should disallow assignment or confirmation on maintenance work order. Now the status previous to NPC status allows assignment or confirmation of orders. So after a order is assigned to the WBS and the WBS user status is changed to NPC when we try to confirm order on this WBS in NPC status sytem allows order confirmation.
    Why is system allowing this inspite of the status profile config says confirmation is disallowed in NPC status. I have checked the object types in the status profile config and maintenance order is also included in that but still its not working. Please help in solving this issue, its critical.

    The business transactions disallowed under NPC status are as below,
    Acct. Assignment order/Project
    Actual activity Allocation
    Assignment Order/WBS
    Confirm Order
    Goods Movement
    Material Purchase Order
    Material Purchase Requisition
    Post Goods Issue
    But orders can be assigned in the status before NPC, but once NPC is set system does not allow assignment of new orders which is correct. But system allows confirmation of already assigned orders. Please help we do not want any order confimation after NPC is set.

  • User Status Profile at Component Level in PM order

    Hi All,
    How can we assign a User Status Profile at the component level in a PM order.
    System statuses are available at component level. And these system statuses control other business transaction also. I want similar to system status, I should have some User status, which can control some business transaction.
    Please share some inputs.
    Thanks,
    Piyush

    Hi Thyagarajan,
    Thanks for the reply.
    My actual requirement is as follows:
    The component's tab page will have many component line items.
    I want a seperate PR for each one.
    But I want that based on an influencing factor, I should be able to control, the timing when PR is generated for each component line item.
    i.e. PR should not be generated together for all line items, but at different times for diff line items.
    Please give some input.
    Thanks and regards,
    Piyush

  • Create new USER status in SAP PM

    My Client want to creat new user status as WORK COMPLETE in addition to TECO for Work Orders in SAP PM.
    Pls suggest if this is possible & can be done in Standard SAP or as an enhancement.
    Appreciate all feedback...
    Thanks
    Mudassar

    Hi Mudassar,
    TECO is system status and your client is asking for user status.
    Its common requirement and can easily be met using OIBS.
    create new status profile in OIBS with diff status and assign the same status profile to your order type.
    Thanks
    Rohan

  • Different user status profile for network header and activities

    Hi everyone!
    Is there any way to define different user status profile at network header level and at network activity level? As far as I know, it is only possible to enter a user profile at network type level, and both netwok headers and activities use the same statuses. Does it work this way?
    Thanks!
    Regards.
    Edited by: Thalos on Jul 2, 2011 12:27 AM

    Hi Punith, Hi abdul!
    Thanks for the reply!
    I've gone through the OPSC, but the thing is that here you define a user status profile at network plant level. But I need to define it at network activity level.
    The reason why I need this is because we have types of activities. We use network activities for client activities, for internal activities, to identify and follow-up risk management, etc. Each group of activities -since they have different usages- has different user status associated. But as I don't have any way to assign different user status profiles, all the activities have the same statuses, although  they will only use some of them.
    Thanks!
    Regards,
    Thalos.

  • Bapi for Project User Status Profile

    Hi,
    Is there any bapi that contains the field "Status Profile (STSMA) of the Project? I only can find the WBS status...
    Thanks in advance.
    LM

    Hi,
    Thanks for your reply.
    But this function is to get the status... The problem is when creating a project by BAPI, the "user status profile" field (STSMA) is not available to fill. In this case, it happens if we have 2 schemes for projects, the bapi only puts the first that appears and I want the 2nd one to be fullfilled.
    How can we create a projet by bapi and have this field?
    Thanks in advance,
    LM

  • Deleting user status profile in equipment master

    Hello experts,
    can anyone tell if it's possible to delete a user status profile. Once we used an user status profile in an equipment i cannot find i way to delete or change the profile to another profile.

    Hi,
    You can only change the user status profile in the equipment provided no status value has been set. Once a status value is set (maybe as intital status) the field is closed for input and no change can be made to the profile.
    -Paul
    Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

  • In Service Orders - Adding addition status in User Status Profile

    Hi Guyds,
    I have a question.
    Customer have a requirement where, in repair process when they receive the defective device (equipment) thru return delivery they want to put the device in contamination. And once the contamination is done they want to stage the device for repair. They are asking how can this requirement be met or mapped in SAP system? I suggested we can define additional user statuses in user status profile. Like when the device is received the user can manually set the user status as "Put to decontamination" status in service order. And once the decontamination is complete, then user can manually set another user status as "Decontamination complete" (just as an example). Customer has agreed with this suggestion.
    Now, my question is I can meet this requirement by adding addtional statuses to the user profile and then assigning the user profile to service order right? And as customer has agreed that user will have to manually set these statuses in service order, so customizing/configuring the status profile should suffice right? Or do I have to perform any enhancement? Please advice but remember that the customer has agreed to setting the user status manually, automation is not required. So, in this case do I still have to go for any enhancement to meet this requirement or can I do it just by defining extra statuses in user status profile.
    Please guide me. Appreciate your help.
    If you have any questions or need any clarifications, please let me know.
    Best regards,
    Abdul Rafey

    Hi
    As you correctly pointed out user status will be straight answer. there is no enhancement required. you have to create the user status and assign the same for the order type .
    also you can automate to some extent ex while order created you can make the "Put to decontamination" as initial and while releasing the order you can automate that "device for repair" will be set on releasing
    regards
    thyagarajan

  • BAPI_BUS2173_SET_STATUS should be able to set user status profile.

    Hi,
    I need use a workflow to setup user status profile for PHASE and TASK, but I found that the unique easy way to setup the user status profile for PHASE or TASK is manual operation.  I have created a user status profile of the BUS2173 and BUS2175. I can't use BAPI_BUS2173_SET_STATUS function to setup user status profile, but it can be used to setup a user status after the user status profiel has been setup by manuay.
    Why?
    Best regards,
    Arrow Yang.

    Hi,
    Try calling BAPI_BUS2173_SET_STATUS first time for setting the status profile by passing the status profile in iv_status_profile parameter and the phase guid but not passing the user status to the bapi.
    Now after this again call the same bapi, this time just passing the user status and phase guid and not passing anything in the status profile.
    We have used this bapi to set the status profile.
    Regards,
    Simmi

  • Marketing user status profile

    Hi experts,please answer this question.
    I am working on marketing planning, i have requirement to create user profile .
    I have created and assigned my profile to Marketing Plan , but I don't know how to assign the user status profile  with system status profile.
    Please answer this question and send your reply to [email protected]
    thanks and regards
    madhusudan

    Solved....

  • User status profiles

    While for both project and WBS the user status profile is assigned in the project profile, the network activity status profile is assigned in the network type.
    But where to default the network status profile?  Or in the network type it should be for both: network and activity?
    Thank you.

    Yes,  you can default same user status profile for both network profile and activity.
    if maintain XYZ user staus profile for network type ps01( example) and maintaining same network type in network profile ABC.
    then you are having same user staus profile in both netwok as weel as activity.
    Venkatesh

Maybe you are looking for