Newbie Question - Arrows in Illustrator CS4

Hi,
I'm new here and a bit of a newbie to Illustrator CS4 (migrating from CorelDraw X3). I'm trying to add an arrow to a line which was drawn using the line segment tool. I followed the steps in the online help which says to select the object (line segment), then go to Effect > Stylize -> Add Arrowheads. The only option I have in the Stylize menu is "Glowing Edges ..." Is it possible the line segment I drew is not considered an object?
Please help, this is driving me crazy.

Yeah, I know this is a few months old. Just wanted to say thanks for posting the answer, since I just spent about 45 minutes trying to figure this out, going down the same "glowing edges" garden path as the OP. I need one of those "I'm with stupid" t-shirts. At least I was able to find the answer. The Adobe help files of course were no help at all, and Adobe even makes it hard to search the forums (hey, I DON'T CARE about arrowheads in Flash, already), but I did find it. Thanks again.
Edward

Similar Messages

Newb Question regarding Same InDesign CS4 file used on two different computers.

Probably been answered 1,000 times or is common knowledge, but I could not get it narrowed down using the search feature.
I would like to take an InDesign CS4 file ( a book) created on my imac, and work on it while away on a macbook pro with identical InDesign CS4 software. I will only be changing layout and some text, but will not be modifying anything that is a link other than re-sizing.
After doing this, will I be able to put the updated file into my imac and be ready to go, or am I playing with fire? If I might do more harm than good, I will not do it. It's just that I have a big project due and I have to be out of town for 3 days and would like to work on it if I can while I'm gone.
Thanks for any input,
Sebastian Gaeta

If you only copy the InDesign file then yes, preflight will alert you to the missing links. Just ignore it, or package the file and transfer the links, too.
Better yet, get yourself a membership to Dropbox. With Dropbox installed on both computers you can keep the entire job (up to 2 GB) in one folder and the files will sync to Dropbox’s servers, which will then sync to all computers sharing that folder. Open InDesign file on Mac 1, make changes, close file. Open file on Mac 2, make changes, close file. Open file on Mac 1 and the changes will be there. Best of all, you can go to Dropbox’s website and access a file’s history. This means you can go back to previous version of the file if you need to.
I add a folder to my Dropbox folder for any current job. When I’m done I move the files out and archive them.
Self serving link: https://www.dropbox.com/referrals/NTUwMDUyOTI5
If you sign up using the above link I get a tiny increase in my allotted storage.

Autosave in Illustrator CS4?!

Hi good afternoon. My name is Joan, and was working with Adobe Illustrator CS4 and kept my job at the end of the file, then I closed the program and asked if I wanted to replace the file and I said yes, thinking it would keep just the last change. But I saved a document completely blank, and I not find the old document anywhere. My question is whether Illustrator CS4 has autosave file? Or is there any way I can find the old file? Working with an iMac but I have Time Machine enabled. Thank you very much for the help. Sincerely, Joan.

If you ever upgrade to CS6 or higher and you're on a Mac then you could use the app "Ai Auto Save" to enable periodic saving of Illustrator files. It's available on the Mac App Store here:
https://itunes.apple.com/us/app/ai-auto-save/id877602617?ls=1&mt=12
...for the sake of transparency, I'm the developer! I made the app after experiencing the frustrations discussed above. Hope you find it useful.

Importing Microstation SE DGN files into Adobe Illustrator CS4

Hello,
New to the forum and was hoping someone could help answer what is likely a very basic question: Can Adobe Illustrator CS4 import DGN files (containing point, line, text, shape, fills, cells and other complex elements) created in Microstation SE? If so, is it an easy process, and what if any data is lost during the conversion? Is the original projection and master units/sub units maintained? I am not familiar with any version of Illustrator, so please be kind (lol). Tks for any help!
Stephen M

If you intend to zoom in or pan on your graphic, you might make it say, twice the size of your FCP sequence's pixel dimensions.
If it is static, paste it into the appropriate video template at the size you require.
Illustrator and Photoshop are far better at scaling when compared to Final Cut Pro.
The pixelization is probably because that section of the Timeline needs to be rendered.
This indicated by a colored bar at the top of the Timeline. A green bar indicates that you can view that area but it will not be at full quality until rendered.
Make sure all render options are checked on:
Consider also: your image is rendered to the pixel dimensions of the FCP sequence and the Canvas always shows a lower res proxy image to better enable real time playback. To view the output of Final Cut Pro as it really is, you need an external calibrated monitor or at the very least, an excellent TV.

A few new Illustrator CS4 questions.

Weird, I just can't figure these out.
First, how do you change the document size/orientation when it's already open? This seemed to be a cinch in all other versions of Illustrator, but now... the new Document set-up menu is quite different.
Related, how does one ADD or SUBTRACT art boards from a document? And remove the art board guides when activated?
How does one prevent Illustrator from opening all documents/a new document, in the same window box, and instead in a separate window box?
If these questions seem rudimentary, let me assure you that I might be having a spaz moment with the new CS4 version of Illustrator, but I've been using the program itself for 10+ years. Maybe I'm becoming lazy and/or senile?

"I have a complex file I created in photoshop with many layers, containing
gradients and blends with no background layer, cropped and feathered edges and
100 opacity. I want to use this for a design in Illustrator CS4 but not at 100%
as I want to type over the top and be able to read. If I simply change the
opacity then the background color in illustrator changes the look of the PS
file. I have tried everything I know, including going back to PS and changing it
there, but the same results. What I ultimately want is a lighter version of the
PS file that is not transparent and allows color behind it to affect the over
vibrancy of the PS file. I'm sure there is a way, but since my knowledge is all
self taught I just don't know the answer. Sure could use some help. Thanks
R"

Illustrator CS4 not flattening for PDF 3rd time asking this question

Everytime I save my Illustrator file as an Pdf file so I can upload it to the company I use for printing site, the layers are all off center. My printing company has not changed anything in there system to have this problem happen. I actually saved the to Illustrator CS3 then saved it as a PDF, and it uploaded fine and it was correct. It seem that Illustrator CS4 is not flattening the file correctly. I never had this problem with CS3. I contacted the adobe they have no idea why this is happening, they said it hould not be happening. Has anyone had this problem and how did you solve it?

here is an example, when I upload this image to the printers I loose the white background and eveything on the bottom of the card is pushed up. The same thing happens with the brochure I have. I can't upload that because this site will not allow it.

Path question in Illustrator CS4

Hi...I am impoorting a bar graph from Microsfot Excel to Illustrator CS4. So far, so good. I can simply cut and paste from the clipboard and Illustrator understands the Excel graph. What I want to do is to convert the graph to grayscle (which I've done), then apply a spot color to just one of the bars in the graph. I'm able to use the direct selection tool to select one of the bars. Each bar appears to be its own path. Then I open up the swatches menu and apply a color. But ALL of the bars in the graph turn that color, as if all of the paths are the same. Is there any way to ungroup a path? I tried the "ungroup" command to no avail. Thanks.

Thanks, Kurt. I figured out how to do it. Actually, I figured out two different ways:
1. Using OBJECT/COMPOUND PATH/RELEASE
and
2. WINDOWS/PATHFINDER/DIVIDE
Both seem to work.

Illustrator CS4 question!

where in the heck can I change the size of my document?! Anyone. Its driving me nuts. Once I create a new doc where can I change it if needed?
thx

Here is a link to the Illustrator CS4 help docs concerning document setup:
http://help.adobe.com/en_US/Illustrator/14.0/WSA3F11634-6132-4959-B4F2-6AAE82FA75B0.html

Illustrator CS4 compatibility question

Howdy,
First time posting to the Adobe forum(s). I recently took over software purchasing and
have a request for Illustrator CS4.
The End User is asking: "Can you confirm with the rep that Illustrator CS4 is compatible
with documents produced with InDesign and Photoshop versions CS2?"
I've been digging around but can't come up w/ an answer, so I'm turning to the experts :-)
Thanks!
- jim

Wade,
People that can recognized a building on fire from far away, normally live longer. Other people, prefer to be inside of the burning building to know it is on fire. Darwin was right!
Who Am I to contradict John Nack - Principal Product Manager, Adobe Photoshop, and the thousand of users saying that installers are bad. Wade, I think you know more than John Nack - Principal Product Manager, Adobe Photoshop! WOW!
So you think all these people are wrong:
http://forums.adobe.com/message/2338394#2338394
http://forums.adobe.com/message/2556519#2556519
http://forums.adobe.com/message/1269588#1269588
No help from Adobe: http://forums.adobe.com/message/2518421#2518421
Well, there are lot more. But I think you can tell to all that people and a Principal Product Manager that they are wrong.
If I waste my money in Adobe's CS5 with bugs that Adobe will refuse to fix, it's not Jim's concern. It is only yours!
I am just telling Jim to be careful and to TRY CS5 version (because I want to help him)
And stop being infatuate of what I am going to do next. People here, don't care about your whining about what I do or don't do. This is Illustrator Forum, not Hans' Forum.
But thank you for your attention and care for what I do in life!

Illustrator CS4 view doesn't match view of same file in Acrobat

We're seeing a pretty strange problem with Illustrator CS4 (Mac and PC). The problem seems to happen ins CS5 and CS6 as well. We have a complex piece of artwork for a foil blister and we use a paragraph of text that has 3 transforms applied to which effectively step and repeat the paragraph of text in a repeat pattern across the artwork. This setup very precisely as it needs to be 100% accurate for print purposes as several units are printed side by side and the repeat runs across the units. Everything is setup correctly in Illustrator and then we re-save as a PDF with 'Preserve Illustrator Editing Capabilities' on.
We genearally save as a PDF 1.6 but we have tried all the combinations now. The file still looks perfect in Illustrator but when the PDF is opened in Acrobat (any version) the step and repeat (transform) on the paragraph of text is now no longer in alignment on onside of the artwork but still OK on one side. No matter what we do we can't fix this problem andit's recreatable each time. Also it's not file specific as we can build a new file and it will also exhibit the problem. We're only talking about a tiny jump here - <0.2mm but this means the artwork is out of spec. Any help is gratefully received!!!!

Hi Russell
Never a dumb question if it it had pointed us in the right direction. Yes the fonts are all embedded (legally). We tried the Acrobat Preferences but the don't make any difference. If we outline the fonts in Illustrator the problem still happens when we do a save as so it doesn't seem to be a font issue.
regards
Michael

Random character appears when outlining text in Illustrator CS4 !!!

Hi All,
Firstly, any help would be greatly appreciated.
My problem is shown below, I have an artwork containing live text produced in Illustrator CS4 on a Mac. On outlining the file for forwarding to prepress, a random "D" appears at the end of one of the sentences. I have been unable to find any reason for this. The "D" is not visible when the document is viewed in Outline Mode, it is not visible when hidden characters are shown, it cannot be selected using the text cursor, it appears regardless of what typeface is used, and there are no effects or transparencies applied to the text. Obviously this is of great concern, we produce artwork using live fonts, and on approval outline the files and forward them to a prepress bureau, the result of random characters appearing on printed material could prove very costly.
If the Illustrator document is saved as a CS2 compatible file from CS4, opened in CS2 and outlined this does not occur.
Thanks,

Same thing here, but in CS3. Files came from a client, but appear to have been created and saved in CS3 also. I couldn't fix it with CS5.
In our case, it's a phantom W that sits on its own line before another W. No hard return, no soft return, no spaces, nothing shows with invisibles on. You can select it (using the shift and arrow keys) and format it, and the changes show up when you outline it. Select it and type a different character, and it winds up on the next line next to the "real" W, as it should. Double-clicking the word selects the phantom letter as well.
Type is area type, and it's rotated 180° (packaging). Original fonts were Trajan Pro and UniversLTStd.
Anyone?

Can you use Adobe Illustrator CS4 Classroom in a book tutorials(on CD rom) without buying the software?

I recently purchased Adobe Illustrator Classroom In a book CS4, and am having trouble getting to the lessons through the CD-rom which came with the book. My question is do I need to purchase the Illustrator CS4 product to use the tutorials/lessons? I would REALLY appreciate some help, it's needed for a college credit for a design major. Thank you!!

There's the trial version that you can download from adoble.com. I think it's good for 30 days. Other than that, doesn't your school have a computer lab?
There's no way to open the files and work with them other than in a copy of Illustrator. You might be able to open them in inkscape (free) or Freehand (no longer available) but then what are you learning? Not Illustrator...
[edit] You should be able to get most of the lessons done in an older version of Illy though, which might be more affordable (if you can find them for sale)

Illustrator CS4 Running Extremely Slow

We are running Illustrator CS4 (version 14.0.0) on a Mac Pro with OS 10.5.8. When we are working on files with a fair to large amount of linked, not embedded, images, the speed of Illustrator is DRAMATICALLY slower. We get the lovely beach ball with just about every move we make - switching tools, locking/unlocking layers, clicking on an element. The beach ball is there for 3 or more seconds with each move - causing the simplest of tasks to take forever. Document size doesn't seem to matter. It happens on a 350 MB file and on a 60 MB file. It does seem like the files it happens to have a fair amount of linked images placed - some have 10 links. some have up to 30 links. Has anyone run into this problem? I haven't found many complaints online, but can't imagine we are the only ones with this problem. I'm anxiously waiting for CS5 in hopes it will solve this problem. Any suggestions?
One more thing - these files that are slow in CS4, run normal in CS3. I don't notice anything being sluggish with them in CS3,

We are having the same problem. We are running Illustrator CS4 (version 14.0.0) on a Mac Pro Quad core, 6GB ram, with OS 10.5.6
We have two machines that seem to be effected and one that isn't, all are the same spec and setup. But we can't seem to narrow down what the problem is.
One work around we have found is to open the file that is sluggish. Let it load then hide the illustrator, kick the network off. then go back to illustrator. It will ask to re-link the images (which are all stored on the network), just click cancel and it will show the red question marks in the links panel. After that is done it goes back to being speedy. If we need to import another pic, just reconnect and disconnect the network as needed. Not ideal but saves having to wait 30 seconds in between each nudge or move.

PDF displays differently from Illustrator CS4 to Acrobat 9.1.x - no idea why

My name is Chris Plessinger. I'm the local IT support for a company that produces promotional products.
Recently, the Art Department came to me with a problem.
They had a graphic that was sent to them by the customer in a PDF file.
The PDF, when opened in Acrobat 9.1, shows an image with another image imposed on the lower left hand corner.
When the PDF is opened in Illustrator CS4, the image is there, but the smaller image that was imposed on the lower left corner isn't there.
In Illustrator, when you press CTRL-Y, you can see the outline of where it would be, but it's clearly not there.
I'm don't know enough about the software to determine why it is showing up in one Adobe product and not displaying in another.
I am uploading the file in question to this post.
I would be very, very appreciative of any feedback on I can get on this issue. I'm not a graphic artist and can't answer the question being posed to me.
Regards,
Christopher

Sweet.
But I have a new question now: how (exactly) did you accomplish this? How did you flatten it?
Thanks for the quick response. I appreciate your taking the time to help.
Thanks,
Chris

PSD Spot Color Channels in Illustrator CS4

Hi all.
Screenprinter here. Trying to migrate my way into CS4. No such
luck so far.
Way back in Illustrator CS2 I used to be able to place a PSD file with Spot Channels,
and have each channel show up as a separate object in Illustrator. This was incredibly
useful, nay, necessary for creating/laying out separations and adding vector work.
From what I've read and tried, this is no longer possible in CS4, which leaves me running two versions,
which is no fun.
I suppose my question is, has anyone come up with a workaround for this, or does the newest
release support this type of operation? From reading the boards, I've found that I'm not nearly
the only person who needs this feature, and so would hope that there is an alternative to
running CS2 still.
Us poor lowly screen printers get dumped on by nearly all Adobe products in terms of usability
(ever shoot the stock reg marks from photoshop?) give us this one feature!

In Illustrator CS2, the individual Spot Channels from Photoshop used to become Opacity masks when imported.
In Illustrator CS4, they are not converted to Opacity masks. Your spot colors are still there - look in the Swatches panel. There is a Spot channels image in the layers panel with 100% Multiply blend mode applied to it.
So it is not correct to say that it is no longer possible to bring spot channels from Photoshop into the Illustrator CS4. See the comparison snapshots below.
Hope this helps.

Newbie Question - Arrows in Illustrator CS4

Similar Messages

Maybe you are looking for