Newbie questions regarding HD editing

I've used Premiere Pro since the 1.5 days, but now I have CS 4 (4.1) and I want to edit HD video.
I have a Sony HDR-SR12 camcorder that I have set to record using AVC HD 16M (FH) with X.V. Color.
My questions are:
1) Is there a preset for CS4 that will control my camera, as there is for my old DCR-TRV240? I can't find one built-in the program.
2) When I first enter CS4 to start a new project and it asks me for the Sequence Presets, which one should I use for the given camera and video format I listed above? Under the AVCHD menu there are submenues for 1080i, 1080p and 720i. Then there are further choices for 1080i25 (50i) with and without Anamorphic, 1080i30 (60i) with and without Anamorphic, the same holds true for the 1080p 24,25 and 30 presets!
I am totally confused as to which preset to choose to get the best quality Blu-Ray (for myself) and standard DVD (for relatives without Blu-Ray capability) output.
3) Is it safe to assume that when I output the edited video to standard DVD the viewers of this disc will see the black bars above and below the picture? Do I need to take anything else into consideration when burning to both formats with the same source material?
Sorry for the ridiculously basic questions, but I don't know where else to ask.
Thanks for any light you can shed on these issues.

I have a Sony HDR-SR12 camcorder that I have set to record using AVC HD 16M (FH) with X.V. Color.
The first place to start would be the camera's manual. It should break down these settings to the exact specs. that the settings will yield. This info is probably most easily accessed from that manual, as the Sony site is likely to not go into enough detail to help someone, unless they know your camera and exactly what the "16M (F)" translates to. That info will go a long way towards setting the Preset for your Sequence.
As for Device Control, in the Capture module, you should have that, provided the OS recognizes the camera, when connected via FW. If you are not connecting via FW, then you will likely have to Copy/Transfer the data, probably with supplied Sony software, and then Import from your computer's HDD, into PrPro.
There is a current thread where Dan Isaacs discusses the HD to SD and then to DVD-Video. That would make good reading.
The "black bars" will be determined by whether the user's TV is only 4:3, and/or how their player handles 16:9 footage. You will have 16:9 footage, so it gets down to the user's equipment and the setup of that equipment.
Good luck,
Hunt

Similar Messages

  • Newbie questions regarding pulling data from hyperion planning cube w/OBIEE

    Hello there,
    we've recently implemented Essbase and are currently pumping it full of revenue/expense data from out source systems to calculate NOI. This data is stored in a staging table at the detail level where it is sourced into Hyperion and aggregated. We also have OBIEE 10g (plan to upgrade to 11g later this year) and we would like to connect to and report out of Essase. Our ultimate goal is to be able to report on the NOI numbers in the planning cube but have the ability to drill down to the detail level which is not stored in Essbase. We've heard it is possible, albeit not native for OBIEE 10g to do this. We've also heard that it is not best practice to use our transactional cube for this type of reporting but to actually create a second "reporting cube".
    What are best practices for getting this NOI data out of Hyperion and merging it with our relational detail reporting? Can we somehow export the data from the cube and store it in a relational database? Should we clone the cube (if even possible) and configure both it and our relational source in the BI repository and setup all drill-throughs there?
    Any info is GREATLY appreciated. Thank you.
    Edited by: cisGuy on Sep 20, 2010 5:31 PM

    i have found information on how to use ODI to extract data for the cube. What I'm really trying to find out though is best practices for reporting off summary level data in Essbase with the ability to drill-through to the detail.
    We've heard reporting off the same cube that users are writing back and transacting on is bad. Do we need to make a "reporting cube" and then bring that in OBIEE and merge it with a relational source or is it better to extract the data from Essbase into flat files and join it to detail tables in our relational source?

  • Follow up question regarding templates - editing modules

    Hi lads
    I am using the church template site to re-build the following site www.mountmellickdevelopment.com and I was just wondering, in the modules that u created in the church template.. How do i go about editing the header module say to make the height bigger plus the people on the board of management want to see what the header looks like with the following words ether side of the logo "Mountmellick" on left and "Deveelopment" on the right, here is the trial site address Home
      I've looked through the stylesheets and the different CSS but can't seem to find the right code.. etc
    Fergal

    adame wrote:
    rallocs: 563
    pending sector: 55
    etc.
    Your drive is probably toast. Compare your SmartData stats with mine:
    Retracts: 844
    *Reallocs: 12*
    *Pending Sectors: 0*
    PowerOn Hours: 2037
    Starts/Stops: 830
    Temp: Current 29c
    Temp: Min 10c
    Temp: Max 50C
    I've only 12 remapped sectors and none pending. From the Wikipedia S.M.A.R.T. article:
    *Reallocated Sectors Count*
    Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
    *Pending sector count*
    Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
    I'm sure you'll find the counts go up if you try to do a surface scanning disk check. Sorry it's not better news but at least you know where the problem lies. Assuming your iPod is out of warranty it's probably time to get your iPod refurbished with a new drive or to buy a new iPod.
    tt2

  • Newbie question regarding ESR/IR.

    I have NWDS 7.0 sp 18..,
    I don't see any options under Windows>Preferences>Webservice.
    What version of NWDS should I be using?
    Is there anyother way to access ESR/IR.
    Thanks.

    Here is the thread that answered my question:
    Where to download NWDS 7.1 ?
    For anyone who mnight be interested:
    1. Type https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/ into your browser
    2. Enter your sap marketplace user and password in the popup
    3. Click on "Download latest NWDS_platform.zip release" and the download will start
    4. Unzip and install... done.
    Is there any other way to download NWDS 7.1? Please post all you experience here...
    Thanks

  • Question regarding  Non editable JText Fields...

    Hi,
    I have a class called Main.In that class I have created a JPanel with 3 labels and 3 JText Fields.
    I am able to call that Main class in another class called Display.
    But when the text fields are being displayed in the Display class the text fields should not be editable.
    Is there any way to do this?
    Gita

    Use the setEditable(...) method.

  • Newb Question regarding Same InDesign CS4 file used on two different computers.

    Probably been answered 1,000 times or is common knowledge, but I could not get it narrowed down using the search feature.
    I would like to take an InDesign CS4 file ( a book) created on my imac, and work on it while away on a macbook pro with identical InDesign CS4 software. I will only be changing layout and some text, but will not be modifying anything that is a link other than re-sizing.
    After doing this, will I be able to put the updated file into my imac and be ready to go, or am I playing with fire? If I might do more harm than good, I will not do it. It's just that I have a big project due and I have to be out of town for 3 days and would like to work on it if I can while I'm gone.
    Thanks for any input,
    Sebastian Gaeta

    If you only copy the InDesign file then yes, preflight will alert you to the missing links. Just ignore it, or package the file and transfer the links, too.
    Better yet, get yourself a membership to Dropbox. With Dropbox installed on both computers you can keep the entire job (up to 2 GB) in one folder and the files will sync to Dropbox’s servers, which will then sync to all computers sharing that folder. Open InDesign file on Mac 1, make changes, close file. Open file on Mac 2, make changes, close file. Open file on Mac 1 and the changes will be there. Best of all, you can go to Dropbox’s website and access a file’s history. This means you can go back to previous version of the file if you need to.
    I add a folder to my Dropbox folder for any current job. When I’m done I move the files out and archive them.
    Self serving link: https://www.dropbox.com/referrals/NTUwMDUyOTI5
    If you sign up using the above link I get a tiny increase in my allotted storage.

  • IMovie 8 newbie question regarding importing HD movies

    I don't have a HD DVD recorder at the moment, but when I do get one I want to know that all the movies I've imported onto my Mac contain the full HD information and 5.1 sound. I'm paranoid that I will import movies from the camera and then delete them off the camera only to find out later on that I have ended up with a load of non-HD imports.
    When I import my HD movies from my handycam into IMovie 8, is it saving all of this information by default?
    Also, how can I tell whether a clip in iMovie 8 is a HD clip or not?
    Thanks all.

    Two ways.
    Right click on the clip (in either the events pane or the project pane).
    Select "Show in Finder".
    Right click in the file in the finder. Select Get Info.
    Alternatively, click on the file in the finder to play it in Quicktime Player. Select Window/Show Movie Inspector.

  • Newbie question regarding the width between 2 strokes.

    Imagine a circle made with two strokes that are about 20pt apart.  How would I go about changing this width yet keep the shape intact. 
    Thanks very much.

    You are talking about the preview bounds of the shape. Select each stroke in the Appearance panel and in the Stroke panel next to Align Stroke, click the appropriate button, hold mouse over each button to see the names. I guess you want to set the alignment for the inner stroke to Outside  and the outer stroke to Inside. However this will shrink the preview boundaries of the shape with half the width of the current strokes. To compensate you may need to change  the size of the shape and offset of the second stroke with the same amount. Then when you chage the with of the two strokes the shape will stay the same and  only the 20pt gap will shrink.

  • Buy License for single edition....newbie question

    Hi, very new to this forum and DPS. I tried to click the "Buy licence for single edition" link on the left of the page, but was not provided with any cost information - only an adobe product notification page. I am a Adober CS5.5 Design Premium subscriber. Keen to know costings before I learn how to do all this. Cheers

    it depends on the adobe store website and may be a legal issue too, because
    you don't buy software but a licence here (in fact, sth. like a serial
    number)
    (mobil gesendet)
    Am 15.10.2011 09:07 schrieb "JeroenVink" <[email protected]>:
       Re: Buy License for single edition....newbie question  created by
    JeroenVink <http://forums.adobe.com/people/JeroenVink> in *Digital
    Publishing Suite* - View the full discussion<http://forums.adobe.com/message/3972473#3972473>

  • Questions regarding hard disk replacement in MacBook Pro Early 2008 Edition

    Hello -
    You folks probably get this a lot but I have a MacBook Pro Early 2008 edition and would like to upgrade the base 200 GB 5400 RPM drive to a Seagate Momentus 7200.4 drive. I have a few questions regarding this, and would appreciate any feedback.
    1) Does anybody know if installing a new hard drive in a MacBook Pro would cause the warranty to be invalidated? I don't believe a hard drive is considered a user replaceable part, at least from what I read, and I would like to know if replacing it myself would void AppleCare.
    2) Does anybody have any experience with the Segate Montentus 7200.4? I'm interested in how reliable the drive is and how much heat it generates. I've quickly discovered that I can use my MacBook Pro as an oven in tight spots and would like to prevent it from cooking its own internals.
    3 random) Does anybody know at what temperature the system actually overheats? I'm seeing 171 F and this is with smcFanControl turned up to the Higher RPM mode. I'm a little nervous when I'm running WoW and the system is averaging above 170 with smcFanControl totally cranked up to 6000 rpm.
    Thanks everyone!

    Thanks for that. I've had mixed results with both Seagate and WD, but less issues historically with WD. My experience with IBM/Hitachi makes is nearly impossible to recommend their products, so based on what I'm seeing the Western Digital Scorpio Black looks like the best bet. Do you happen to know if Apple will do hardware installations outside of warranty repair scenario's? Ripping open my only notebook to perform "involved" hardware maintenance is not something I'd prefer to do, even with my technical background.

  • SG200-08 Newbie Questions

    I have recently purchased the SG200-08 Smart Switch, but I have a few "newbie questions" about it as I get started using it.
    The on board firmware shows 1.0.1.0. Is that the latest firmware to the switch?
    Do I need to enable IPv6 Auto Configuration and DCHPv6 in my switch settings to be ready for IPv6 as my ISP rolls it out down the road?
    How do I go about changing the switch's username? I was able to easily change the password, but having issues getting the username to change.
    Do I need to do anything about the LLDP-MED settings? What exactly is that?
    How do I confugure the System Time Settings so the switch functions in my time zone (USA Central Time)?
    Thanks a bunch for any assistance!

    Hi Nathan,
    My guess is that NAT is already on - you have one public IP address from your ISP. Your router will use NAT (network address translation) to allow multiple clients (and either dynamically assign them private IPs via dhcp or you set them statically) to connect to the internet using the one public IP. It also sounds like your RV042G is assigning both ipv6 and ipv4 addresses, and theres nothing wrong with that. Unless you have specific information re: ipv6 from your isp, however, I would suggest not worrying about it until you hear from them. Are your macs connected to the router via the SG200 switch? If so, it looks like its passing ipv6 just fine.  UPnP is something completely different - thats with opening ports like you mentioned - its a way that your devices can communicate with the router to automatically enable the proper port forwarding for the device/application.
    Regarding the username, create a new user account. I don't think you can edit the cisco user, but try deleting it after creating and testing a new user account..
    I'm not familiar with the Polycom system, but I would leave the settings as default unless you are using true IP phones (rather than an ATA adapter). From a quick google of the polycom device, I don't think you will gain anything from LLDP/CDP as the handsets use regular cordless phone freqs. With my setup, we use cisco IP desk phones and cordless wifi phones, CDP makes life easy as the cisco access point, wifi phones, cisco switch, and cisco desk phones (connected via ethernet) see each other and know what they're dealing with automatically.
    I don't see the SNTP setting for unicast / broadcast that you're looking at. For the switch to get the time from a sntp server, under administration -> time -> sntp settings, add a server, and then back on time-> system time, enable sntp server as the main clock source. What are you using as your sntp source? Do you have an internal sntp server? You don't need to enable dhcp on the sntp server.
    May I also point you to the two manuals, I think they may be helpful:  RV042G  & SG200
    Hope thats helpful.
    Best,
    David
    Please rate any helpful posts.

  • IFS Newbie questions

    Two newbie questions:
    1. I have a simple batch file as below that I execute using ifsshell.
    login system/manager
    cd /FolderSystem
    put /usr/local/oracle/testifs/test.txt
    logout
    How do I copy to iFS all files in a specified local directory - /usr/local/oracle/testifs/* doesn't seem to work.
    2. Can database user be mapped to iFS user?
    Thanks in advance,
    Anandhi

    xsi wrote:
    - Is there a way to display X-Axis labels vertically in a chart?
    See Badunit's reply below.
    - Is there a way to display only specific values in a line chart?
    You can create a chart from "all the data in a table or only data in selected cells of one or more tables," according to the Numbers '09 Users Guide. Rather than reinvent the wheel, I'll refer you to Chapter 7 of that document, and specifically to Page 132.
    If I recall correctly, there is a copy of the Users Guide on the IWork installation disk. If not, the Guide is available for download in the Help menu in Numbers.
    Regards,
    Barry
    Message was edited by: Barry

  • MEGA-Newbie Question

    This has to be the most newbie of all newbie questions. Interestingly enough, it is the one that is most rarely answered in a non-technical way that the novice can understand.
    What exactly do I need Motion for? What, in common-sense, regular-language terms, does it do?
    My manuals tell me how to do all the things it does. But they assume I am an experienced editor (I'm an experienced filmmaker, but only just started working in editing) who already knows all the things that CAN be done and only wants to know HOW to do them in Motion. This is not me.
    So, say I am making a 90-minute HDV feature music doc. I have footage, I have stills. I will need captions, titles and text on screen. I will need an end credit roll. What is it I will probably want Motion to do for me that FCP can't do on its own?
    I'd appreciate an answer in somewhat non-technical language that addresses the practical use -- from a filmmaker's point of view -- of this no doubt amazing program.
    Thank you.

    hi Paul,
    You are right you can do much of the things Motion does in FCP, but Motion takes them further and often makes them easier to do.
    Briefly whereas FCP is generally for editing moving pictures from rushes to a coherent whole, Motion is used to composite or layers of moving pictures to make a new coherent whole picture.
    So i plain words, you can meld different sources of video, stills text and other sources together to make a new end peice. You can animate text, warp pictures, create fires, smoke, hide bits ( masking), animate graphical elements. In short whenever you need to layer up multiple sources of imagery Motion is your man. Sure FCP can handle a lot of this, but Motion is designed specifically and only to do this, and does it very well. ( You would not want to edit in Motion!)
    In your 90 minute example you could do it all in FCP and make it look very nice. But you might need to go the extra mile with the title sequence, perhaps the captions will have some kind of generic strap line ( lower third) under All these things could be done easier and better in motion. However you would not want to import the whole 90 minute programme into Motion and start throwing captions on it. Rather you would want to build each element ( strap line, animating titles, opening sequence etc) in Motion and then import them into FCP for the final mastering. Motion is for short sequences, and FCP is used to collect them all into one programme.
    I make music commercials for a living, do all the cutting on FCP and build all the graphic elements in Motion, take a look at my site for some examples if you'd like,
    http://www.moojoose.co.uk
    Hope this helps you
    regards
    adam

  • RV042G Newbie Questions

    I have the new Cisco RV042G router, and I have just a few "newbie questions" about it as I get started using it:
    The firmware on board is v4.2.1.02. Since this is a brand new router, is that the latest firmware?
    Under Time>DST Dates, what do I need to configure in there? I'm in the US, Central Time.
    I want to use Back to My Mac from iCloud (formerly MobileMe). Under the iCloud preferances pane on my Mac, it's saying: "Back to My Mac may be slow because NAT Port Mapping (NAT-PMP) or Universal Plug and Play (UPnP) is turned off on your router. Turn on NAT-PMP or UPnP." What should I enable on my router in order for Back to My Mac to better function?
    I'm using a VOIP phone on the network (only 1 device with a couple phones). Are there any QoS settings I should tweak for better performance of my VOIP phone? I did change the port the VOIP phone is connected to to High (instead of Normal) under Port Settings. Will this help boost performance?
    I also want to setup a VLAN on a port for guests to access the Internet, but not have any access to my personal network. Here's the steps I've done so far. Is this sufficient or is there anything else I need to do?
    I went to Setup>Network, enabled Multiple Subnets.
    I added 192.168.254.1/255.255.255.0 as a subnet.
    I went to Port Management>Port Setup, set the port I wanted to use (Port 4) to VLAN2.
    I went to Firewall>Access Rules, added two rules:
    Deny All Traffic from 192.168.254.0 to 192.168.1.0.
    Deny All Traffic from 192.168.1.0 to 192.168.1.0.
    Thanks everyone for your help!

    Easy.  just goto the DHCP field and fill in the Static DHCP fields.
    Assigning static IP addresses by adding devices from a list
    Click Show unknown MAC addresses. The IP & MAC binding list appears. If the web browser displays a message about the pop-up window, allow the blocked content.
    The devices are listed by the IP address and the MAC address. (Typically the MAC address appears on a label on the bottom panel or back panel of a device.) If needed, you can clickRefresh to update the data.To select a device, first enter a descriptive Name. Then check the Enable box. Alternatively, select all devices in the list by clicking the check box at the top of the Enable column.
    Click OK to add the devices to the Static IP list, or click Close to close the pop-up window without adding the selected devices. After you click OK, a message appears. The message includes important information. Read it before clicking OK. Keep the browser open and wait until the selected MAC addresses appear in the Static IP list.
    Modify or remove list entries, as needed:
    To modify the settings: Click a device in the list. The information appears in the text fields. Make the changes, and then click Update. If you do not need to make changes, you can click Add New to de-select the entry and clear the text fields.
    To delete an entry from the list: Click the entry that you want to delete, and then clickDelete. To select a block of entries, click the first entry, hold down the Shift key, and then click the final entry in the block. To select individual entries, press the Ctrl key while clicking each entry. To de-select an entry, press the Ctrl key while clicking the entry.
    Assigning static IP addresses by entering devices manuallyIn the Static IP Address section, add or edit entries as needed. Remember that the settings are not saved until you click the Save button.
    To add a new device to the list: Enter the following information, and then click Add to list.
    Static IP Address: Enter the static IP address. You can enter 0.0.0.0 if you want the router to assign a static IP address to the device.
    MAC Address: Enter the MAC address of the device. (Typically the MAC address appears on a label on the bottom panel or the back panel of a device.) Enter the address without punctuation.
    Name: Enter a descriptive name for the device.
    Enable: Check this box to assign the static IP address to this device.
    To add another new entry: Enter the information, and then click Add to list.
    To modify the settings: Click a device in the list. The information appears in the text fields. Make the changes, and then click Update. If you do not need to make changes, you can clickAdd New to de-select the entry and clear the text fields.
    To delete an entry from the list: Click the entry that you want to delete, and then click Delete. To select a block of entries, click the first entry, hold down the Shift key, and then click the final entry in the block. To select individual entries, press the Ctrl key while clicking each entry. To de-select an entry, press the Ctrl key while clicking the entry.
    Using the Static IP List to Block Devices
    You can use the Static IP list to control access to your network. You can block access by devices that are not on the list or do not have the correct IP address.
    Add devices to the Static IP list as described in Static IP Addresses.
    Enable or disable the following features:
    Block MAC address on the list with wrong IP address: Check this box to prevent a computer from accessing your network if its IP address has been changed. For example, if you previously assigned a static IP address of 192.168.1.100 and someone configures the device to use 192.168.149, the device will not be allowed to connect to your network. This feature discourages users from changing their device IP addresses without your permission. Uncheck the box to allow access regardless of the current IP address assignment.
    Block MAC address not on the list: Check this box to block access from devices that are not included in the Static IP list. This feature prevents unknown devices from accessing your network. Uncheck the box to allow access by any connected device that is configured with an IP address in the correct range.
    Hope that helps.
    Regards Simon
    http://www.linksysinfo.org

  • Question Regarding MIDI and Sample Accuracy

    Hi,
    I have 2 questions regarding MIDI.
    1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
    2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
    I've looked through the manual, and couldn't find any specific answer to these questions.
    Thanks!
    Message was edited by: Matthew Usnick

    Ok, I've done some experimenting, and here are my results.
    I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
    Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
    I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
    SO.
    Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
    This is very good news, and glad I worked this out!
    (if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
    Message was edited by: Matthew Usnick

Maybe you are looking for

  • HP Laserjet 1536dnf MFP - Windows 8.1

    Problem:  Error message:  "HP ToolboxFX has encountered an error and can not recover".  I have no idea where to find HP ToolboxFX, however, I have updated driver but still get error message.  What else can I do to get rid of this error message? This

  • How to get Valuation class in Material master?

    Dear all,             I want to have valuation class in my report and i want to take is as a material attribute.Actually i have check all the attribute of material master but valuation class is not there. i am having valuation class as a master data

  • Error in joints

    Hi Team, I had 1 Fact table nad 6 Dim tables i dragged those tables to BMM layer by createing new model and there when i am joining the fact and dimension tables it is showing error that [38078]:Complex Join invalid expression how i have to proceed n

  • Update Checking Over the Air..N80

    hi all, this is my very first post. i'm a N80 user, and i just flashed my firmware into v 4.0623.0.42 recently. i did it via NSU and i worked just fine. But i have 1 simple question, everybody's talking about checking updates over the air via 'Device

  • IPhoto Library contains system pictures.

    I've been helping a FOAF make the switch to Apple and everything's gone smoothly except for one thing. System icons and pictures keep appearing in iPhoto as pictures. I removed them once with great trepidation and suffered no ill effects. They are, h