Newbie:what is the time to call release() in the tag class?
I found the tag will be only instance one times in the jsp server, so the private varable can be access by another request call. there are one release() method in the interface defined, however, I have ever saw any instance to call it explicity, right now I call it in the doEndTag, is that all right?
frederick
The JSP engine will call release() when it is reusing a tag instance with different parameters. You don't need to explicitly call release() in the code.
Similar Messages
-
At the time of cheque release, trigger the email to vendor,
Dear Expert
At the time of cheque release, trigger the email to vendor, informing him that his cheque is ready. In case, this is not available in SAP then we will have to write Z_program. Please let us know the possibility,
Thankx in Advance
AjeeshCheck section "messages" under this link
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee120555c811d189900000e8322d00/frameset.htm -
I have upgraded my iphone 4 by iTunes from ios version 4.3.5 to 5.0.1
and think it was the biggest mistake I have ever done.
Now my iphone basically not a celluler/mobile phone. I can't hear a single tone at the time of calling
and even the the receiver also can't here my voice. calling other and after receiving by them and to be
mute is the thing happned to me with that upgradation. before that it was working absolutely fine. I have
checked my microphone and headset by recording and it seems absolutely OK. I don't know what should
I do now?
Please help me.
I tried to downgrade my phone to 4.3.5 back but at don't accept downgradation and gives me an error code 3194Thanks for reply,
It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
Iwish I have not upgraded.
I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
Thanks for your valued suggessions but it didn’tmade any difference to my situation.
So now I have an ipod in the price of an iPhone4. Crap.
Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users. -
By the time will be released worldwide IOS5?
By the time will be released worldwide IOS5?
Please read any of existing 1000+ posts asking exactly the same thing.
-
At the time of call when i use speaker my sound is not visible to the prsn i call
at the time of call when i use speaker my sound is not visible to the prsn i call
Hello smarty007,
Thanks for the question, and welcome to Apple Support Communities.
From your description, it sounds like you are having issues with others hearing you while using speakerphone. For these symptoms, the following article provides the most relevant information. On the iPhone 4, it is commonly due to a third-party case blocking the top microphone:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Additionally, you can check out these articles:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks,
Matt M. -
Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.
https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
Type '''about:crashes''' in the URL bar and hit Enter. <br />
Click the hyperlinks to bring up the Crash Report pages and copy'n'paste the URL of each of those reports into the message box here. We'll see if we can help you figure out what is causing those crashes to happen. -
Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$
-
MY new Ipod Nano does not hold a charge. I use it mostly as a watch, perhaps look at it 5 or 6 times in 8 hours, and leave it in sleep mode the rest of the time. I drains to the red line in less than 2 days. My husband's nano will last a week this way. I thought it drained because of looking at photos, so I quit looking at them and it made no difference. Am I doing something incorrectly to cause this short battery life?
You are still under warranty if your iPod is "new." Take full advantage of it by either calling iPod tech support, Apple Care if you have it or take it in to an Apple store or an AASP. Whichever is more convenient for you.
-
Can I use the Apple Time Capsule to store my compressed DVD's & BD's to access from my iPad/iPod/iPhone wirelessly while on a trip if I have the Time Capsule plugged in in the car/SUV?
castruck wrote:
I would be accessing the files wirelessly from the iPad/iPod/iPhone to play the files.
what player do you intend to use? That is what I am wanting to check.. you understand there is no itunes server in the TC..
BTW if you want to use the TC in your car/SUV.. convert it to 12v operation.
https://sites.google.com/site/lapastenague/time-capsule-power-supply-repair-kits -
I'm trying to make it so the year displays, but haven't been able to figure out how to change that. I have the Day of the Week, Month, Day and Time only and I haven't been able to figure out how to do that in the Date & Time or the Language & Region Settings.
There is no option in System Preferences. However, it may be possible to set it with a "defaults write" command.
This page shows how to set the time and date format in the Terminal, but doesn't show whether you can add the year.
http://apple.stackexchange.com/questions/75116/i-want-to-change-clock-from-12h-t o-24h-mode-via-terminal
If you can find a description of Apple's date format code that includes the year, then it may be possible. Or not.
I'm guessing Apple thinks only Time Travellers need to ask what year it is... -
Limit the time of lookup and make the method to throw an Exception
When I connect from
Client
Remote Desktop Client
Server:
SUN JAVA SYSTEM APPLICATION SERVER 9.0
Initial Context object is initialized as per below coding,
System.setProperty("org.omg.CORBA.ORBInitialHost", prop.getProperty("hostName"));
System.setProperty("org.omg.CORBA.ORBInitialPort", prop.getProperty("portNumber"));
InitialContext ctx = new InitialContext();
while .lookup("globalJndiNameForSessionBean") method is invoked on the InitialContext object and if the server is not available, it is throwing non stop error.
Please tell me wether I have to add any other Properties to limit the time of lookup and make the method to throw an Exception after two or three second, if the server is not available.What do you mean by 'non-stop error'? This can only happen if your code goes into a non-stop loop.
The default TCP connect timeout is about 75 seconds, which in some circumstances is too long, but two or three seconds definitely isn't long enough. Ten to twenty would be more like it.
I'm not aware of any system properties that limit the ORB connect timeout but then I'm not aware where the existing J2SE ORB system properties are documented. If anybody has ever found this please let us know. -
An attempt to set the time was aborted due to the offset being too large
Kindly tell us what this alert mean I am getting this alert on my one domain controller I have total 4 DC in my environment and all of them are in good health except this one which I am sending the below alert.
An attempt to set the time was aborted due to the offset being too
large
Alert Description
Source:
ServerName
Full Path Name:
Server Name
Alert Rule:
An attempt to set the time was aborted
due to the offset being too large
Created:
3/27/2015 5:33:23 PM
The time service has detected that the system time needs to
be changed by 190800 seconds. The time service will not change the system time
by more than 172800 seconds. Verify that your time and time zone are correct,
and that the time source DC Server Name
(ntp.d|0.0.0.0:123->172.16.0.75:123) is working properly.Hi Syed,
>The time service has detected that the system time needs to be changed by 190800 seconds. The time service will not change the system time by more than 172800 seconds. Verify that your time and time zone are correct, and that the time source DC Server
Name (ntp.d|0.0.0.0:123->172.16.0.75:123) is working properly.
According to above message, you may need to logon to the server and make sure the time zone is set correctly.
You may follow the below step to sync time:
Click Start, point to All Programs, point to
Accessories, and then click Command Prompt.
Type w32tm /resync, and then press ENTER.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hej!
I've switched from Google to Firefox because I was so tired of Google crashed all the time. Now I have the same problem with Firefox, Bank id, file downloading, accessing Web pages, none of it works. What is the error?
Ronnie.When Firefox crashes, it usually records information about what was happening at that moment and displays the Mozilla Crash Reporter. Are you seeing that, or is Firefox just freezing and you're killing it?
Assuming you have crashes, you can submit that data to Mozilla and share it with forum volunteers to see whether it points to the solution. Please check the support article "[[Firefox Crashes]]" (especially the last section) for steps to get those crash report IDs, and then post some of the recent ones here.
If that's not possible, have you tried Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference? -
Ability log and track the time and expense reports of the sales employees
Hello Experts
Ability to log and track the time and expense reports of the sales employees.
Can we do this through WEB UI
Please revert.
RegardsHello
Thanks for the reply
I thought of storing time zone in the time and use session variable to pick up user's log in info along with time zone that he is associated with.
However, if it has to be maintained by a table, then it should be manually updated right? I don't think that's what I want to do because a lot of our users travel a lot for short time, so they may not have their time zone info updated in the DB table when they are traveling somewhere else for a brief period while accessing OBIEE.
So my question is, how can I pick up user's locale time zone setting and make sure that the data, such as hour conversation are converted along with the displayed time stamp?
Thanks -
How do I go directly from one frame to another particular frame which is far away in the time line? (e.g the two frames are separated by 100 frames). I mean, is it possible to take the playhead from one frame to another frame directly which is 100 frames away in the time line? Thanks for any reply.
In the Timeline, go to the first frame and press M to put a marker on it. Go to the other frame you want to jump to and put a marker on that one too.
Now press Ctrl+Semicolon to go to the previous marker - or Ctrl+Comma to go to the next marker.
Andy
Maybe you are looking for
-
My friends number is in my i message along with mine how do i get it out???
i have a i phone 4 8 g when i downladed ios 7 on my phone my frend that has used my i tunes account his phone number is now in my i message and all his contacts are in my phone how do i get his number out of my i message?????
-
Iphone won't start after crash
My iPhone 4S crashed and restarted but fails to wake up. It restarts but then stops and restarts again. It won't stop until the battery is dead but does the same as soon as I plug it in. Can I wipe and reset to factory without connecting it?
-
Material Manegement certification course code
Hi all, Sorry this time i am not asking any technical question . I am aiming to have SAP MM Associate certificatiion . But i am not abel to find from SAP site , which course code shall i go for . Based on course code i need to search for respective b
-
Copy documents designed on development machine to Clinets machine 2004A
I know that you can copy and paste documents desingd on the layout window and I have done this. But it is impossible to do this between two physical computers. Even in terminal server mode. All I want is to modify and create my AR Invoice etc and Por
-
The surface of my mouse will not scroll
For some reason I am unable to use the surface of my mouse to scroll up or down any apps so I cannot get to the bottom of this screen