NI-DAQmx 8.8 does not work properly after upgrade to LabVIEW 8.6

Hi,
I just upgraded to LabView 8.6 from version 7.1 and found out that the NI-DAQmx 8.8 drivers do not install correctly, since there is not Measurement I/O tab in the Functions palette (see attached document). The curious thing is that I can see all my NI-DAQmx devices in the MAX, and they all test correctly, i.e., they are working correctly. The sales representative for my area recommended me to uninstall , and reinstall LV8.6 and then reinstall the NI-DAQmx 8.8 drivers, but it did not work. I still do not see the Measurement I/O functions and my application says that it "cannot compile" the NI-DAQmx vi's. Thanks in advance for your help.
Peter
PS. Someone reported a similar problem back in 2003, but the final solution was not posted. Thanks again.
Attachments:
LV8.6.doc ‏116 KB

Dear Mallori,
Thanks for your help. You are right, I uninstalled and reinstalled LabVIEW 8.6 (update from LabVIEW 7.1) and reinstalled DAQmx 8.8. I still continue to have some problem that seem (to me) beyond compatibility issues. Here are the answers to your questions:
1.  Before you reinstalled DAQmx 8.8, did you
uninstall it? If not, then I  believe that the installer would see the
driver already present and not actually make any changes.
REPLY: No, I did not uninstall DAQmx 8.8. What do you recommend? Should I uninstall BOTH LabVIEW 8.6 and DAQmx 8.8 and then reinstall everything again? 
2.  When you say that the VIs are not responsive,
could you describe this a bit better? Perhaps post one of the error
messages about compiling that you mentioned in your first post?
REPLY: I am having a lots of "This SubVI is not executable" error messages in many of the library VI's not even mine. See the attached file.
3.  If you open the NI Example Finder (Help»Find
Examples) and the expand Hardware Input and Output»DAQmx»Analog
Measurements»Voltage, are you able to run one of the example programs
and see the correct values that you see in the Measurement and
Automation Explorer Test Panels?
REPLY:  I tried to runa couple of the examples for continuous voltage acquisition (internal clock) and both open with errors (see attachement).
Thanks again for your help. I am looking forward to your recommendation.
Regards,
Peter
Attachments:
LV8.6-3.doc ‏43 KB

Similar Messages

  • My Iphoto does not work properly, after downloading Mavericks.  How can I fix it ?  loading Mavericks

    My Iphoto does not work properly after downloading Maverick. How can I fix it ?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • Wifi is not working properly after upgrading 7.1.1 onmy i4s

    Dear Apple
                      i realy appriciate on your work ..right now i am suffreing from a problem that one i mentioned in subject .sometime my wifi is working good and sometime it shos dead to me ..but now its not working well after upgrading my phone on 7.1.1....
    its my humble request please find a solution and provide me as soon as possble..
    my totally work on wifi .
      and sometime it goes hang in setting when i come on setting folder and clicked on wifi its get hang and also showing wifi is not availabe..please provide me best solution
      Thanx & Regards
        Sam
      +91-92555-04628

    settings - general - reset - reset network settings.

  • Ipad2, safari does not work properly after ios6 update. How do I fix it?

    I need help in fixing safari problems after ios6

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you mean by not working properly? Explain in detail.
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • ESS is not working properly after upgrade from 4.7 to ECC6.0

    ESS Scenario in 4.7
    4.7 Scenario:
    The IMG configuration u201CWork and Life Eventsu201D is done to map them with the PZM3 service (Home Page) to get them as different folders/links on the home page as given below:
    List of Services used to set up ESS:
    Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized     Type
    1     Home Page     PZM3                                          Standard                 Service
    2     Inbox                     BWSP                                          Standard                 Service
    3     Calendar                     BWCA                                          Standard                 Service
    4     Whou2019s Who     PZ01                                          Standard                 Service
    5     CPF Display     http://192.168.0.2:7070/omcpf             NA                                  URL
    6     Payslip Display     ZPAYSLIP_USER                          Customized                Service
    7     Section 80C     PZ88                                          Standard                EWT
    8     Section 80                     PZ80                                          Standard                EWT
    9     Form 16                     HRESSIN_F16                          Standard                EWT
    10     Address                     PZ02                                             Standard                EWT
    11     Bank Information     PZ03                                          Standard                Service
    12     Open Appraisals     Not Available                           NA                                 Service
    13     Emergency Address     PZ05                                           Standard                 EWT
    14     Family/Dependents     PZ12                                           Standard                 EWT
    15     Personal Data     PZ13                                               Standard                  EWT
    16     Previous Employers     PZ28                                           Standard                 EWT
    17     Apply Leave     WS20000081                           Standard               Service
    18     Leave Overview     WS01000109                           Standard              Service
    19     Leave Balance     PZ09                                             Standard              Service
    20     Loan Application     ZLOAN                                          Customized              Service
    ECC6.0 Scenario:
    In ECC6.0, flow based services are no more supported by ECC6.0 and Dynpro based services are supported.PZM3 (Home Page) is a flow based service.
    There is no replacement provided for PZM3 service, so the IMG configuration is not possible for u201CWork and Life Eventsu201D.
    OSS ticket raised, but no solution for IMG u201CWork and Lifeu201D events.
    List of Services would be used to set up ESS:
    Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized    Type
    1     Home Page     PZM3                                       Standard                           service
    1)this service is not available
    2)SAP does not provide any replacement.
    3)PZM3 is not supported in Integrated ITS. No direct solution proposed.
    4)Given reference of few notes.
    5) A dynpro (module pool screen) based IAC needs to be created and links need to be provided on that screen. Generated HTML page is modified  to access the services via URL or by OKCODE.
    Screenshot attached below.
    2           Whou2019s Who                 PZ01                                      Standard                             Service
    1)this service Available
    2)Not Working properly.
    3) The problem may be because of the dependency with SAP Query. Either Query is missing in the new system or not having the proper authorization. Needs to be debugged and finalized.
    7     Section 80C     PZ88      Standard     EWT     Available               
    8     Section 80      PZ80     Standard     EWT     Available               
    9     Form 16                HRESSIN_F16     Standard     EWT     Available               
    10     Address                PZ02     Standard     EWT     Available     Only EWT Available.          Service needs to be created to access the EWT.
    11     Bank Information     PZ03     Standard     Service     Available     EWT Available.           Service needs to be created to access the EWT.
    12     Open Appraisals     Not Available     NA     Service          EWT Available.           Service needs to be created to access the EWT.
    13     Emergency Address     PZ05     Standard     EWT     Available     EWT Available.           Service needs to be created to access the EWT.
    14     Family/Dependents     PZ12     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
    15     Personal Data     PZ13     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
    16     Previous Employers     PZ28     Standard     EWT          Service Available          
    17     Apply Leave     WS20000081     Standard     Service     Available, but not working                                                                               No solution is proposed yet.
    18     Leave Overview     WS01000109     Standard     Service     Available, but not working               No solution is proposed yet.
    19     Leave Balance     PZ09     Standard     Service     Available, but not working               No solution is proposed yet.

    Ya ramakrishna,
    Even easier is for you to send us the mail ID of your client. We will do the work, then send them an idoc of message type INVOICE and for you a post card of course.
    Please do the needfull,
    Julius

  • Bluetooth does not work well after upgrade to win 8.1 from win 8

    System:                       Dell Inspiron 15R 5520
    Bluetooth hardware:   Intel(R) Centrino(R) Wireless Bluetooth(R) 4.0 + High Speed Adapter
                                         Microsoft Bluetooth Enumerator
    Ever since I upgraded from Win 8 to 8.1, the bluetooth has not been working well.
    The option to browse a remote folder or send a file does not work. 
    I can send a file only by opening the contaning folder, right click, and send to bluetooth, but cannot receive a file unless I go to
    run and then open fsquirt.exe .
    I have unpaired and uninstalled the devices respectively, and then reinstalled and repaired them. But this does not work .either.
    Unfortunately, I am unable to paste  screenshots of the device manager and error messages until I am verified.
    Can anyone give me a solution to this problem?

    Verify that you have the latest drivers for Windows 8.1 installed from the manufacturer's website.
    http://www.dell.com/support/drivers/us/en/19/Product/inspiron-15r-5520

  • Plug and play speakers not working properly after upgrading to Windows 8.1

    After upgrading to Windows 8.1, my plug and play speakers do not work properly.  I have uninstalled and reinstalled them, and restarted.  When I try to play music, nothing comes out.  If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound.  They worked fine until I upgraded to Windows 8.1.  The manufacturer has not been able to successfully assist me.  Has anyone else reported a similar issue after upgrading OS software?  Any suggestions?  These are fairly new speakers, less than 2 years old, and not used very much.  I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard).  Any suggestions would be greatly appreciated.

    @sisboldt ,
    Hello and thank you for posting on the HP support forums.
    So that I can better help you with your sound issue.  Please post back with your full model and product number.  Use this link to help you find the information.
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    Here is another link you may find useful.  Please give it a read before posting back with your system information.
    Advice for asking the "Very Best Question"
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Why Mail does not work properly after updated to Mountain Lion?

    I updated to ML two days ago and my Mail is not working.  I can read but cannot reply because there is no cursor.  Restarted a few times, no change.  Anybody has the same problem??
    Rudh

    I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
    And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
    I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

  • 2008 Macbook pro left click not working properly after upgrading to 10.6.8

    I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
    Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything.  I have tried plugging in a mouse, but when I do so the mouse also behaves the same way.  The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
    I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
    I tried deleting  com.apple.driver.AppleBluetoothMultitouchTrackpad.plist   and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
    Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?

    I started having the same issue after update.  I'm on a MacBookpro running 10.7.2
    ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working.  Two days later problem was back.  I then did a reboot and the computer was back to working.  Today the computer worked fine tell it went to sleep.  I had to do a hard reboot to get the Mac up and running and now no left click.  Please help. I can not use the Mac  with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working.  One other item when you go to pick your user at startup the left mouse click works.  Help!

  • HT1414 Linksys webcam does not view properly after upgrading to ios6

    I upgraded my iPad 2 and iPhone 4 to the new ios 6. Now when I go to view my linksys web cams they do not view properly. I see the camera view for a few second, but then it goes blank.  I have another iPad 2 which I did not upgrade and am still able to view with the old iOS. Seems like the new iOS 6 did something, but not sure why it will not work with the new iOS.
    I access the site through the web browser.

    Same problem. I two nights ago I upgraded to IOS6 on my iPad2 and can no longer call up my LinkSys cams in Safari. My iPod Touch 4 is still on IOS5 and no problem viewing cams in Safari.
    I am still in Lion on my iMac but last month upgraded to Safari 6. I then lost the ability to view my cams in Safari. I went back to Safari 5.1.7 and then no more problems.
    Obviously this is a Safari error. Until this is fixed, I will not upgrade to Mountain Lion.
    I spoke to Apple last night and the tech said he will contact engineering. He took detailed notes so let's hope for the best.
    If you need to view your cams on your devices, investigate iCam by SKJM or LiveCams Pro by Eggman Technologies. Both apps do way more than just viewing your cams. I have been using iCam for about a year for security reasons. Your cams can be set up to record on motion where images will be stored on your devices AND Dropbox.
    iCam, however, is slightly difficult to set up (and sometimes maddening) but lots of info on their site as well as direct response to any problem by email. Some idiosyncrasies but hey it's only $5 and does provide security when you leave your home. Not to mention all your cams on one page if all you want to do is look at them.

  • Organize by conversation is not working properly after upgrade to Lion

    After upgrading from 10.6 to 10.7 I've figured out that Mail Application is not very accurate with organizing by conversation. Mail from Snow Leopard was pretty nice. But after upgrade it started to make several conversation. This is very annoying especially when I'm working with support tickets.
    Here is one of the example:
    Mail 10.7 ( Lion )
    [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    RE: [xxx.com #14531] Company Ecuador: training/refresh
    RE: [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    Mail 10.6 ( Snow Leopard )
    [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    RE: [xxx.com #14531] Company Ecuador: training/refresh
    RE: [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    [xxx.com #14531] Company Ecuador: training/refresh
    I also tried Mozilla Thunderbird. It is organizing by thread very accurate.
    Is there any way how to configure this in Mail? May be I'm doing something wrong?
    I like all new features of new Mail programm, but it wi very annoying.
    Thanks,
    Shony.

    Hi Sundar & Rakesh
    I've followed Sundar's request in the previous thread we worked on together to provide further assistance here:
    ** Scenario Summary **
    The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data") When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup. Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window. This was working fine before upgrade to SAP NW 7.4 SP 5.
    Ok the first point of reference and analysis here is to check and review: Workprotect mode via the following navigation path:
    System Admin-> System Configuration -> Service Configuration -> Under one of the services: Work protect mode property.
    Now in terms of this popup kindly ensure the configurations are setup accordingly as per the following document:
    http://scn.sap.com/docs/DOC-2513
    What is the setting of WDPortalWorkProtectMode.setApplicationDirty ?
    Work Protect Mode
    http://help.sap.com/saphelp_nw04s/helpdata/en/45/b76f4169e25858e10000000a1550b0/content.htm
    Lastly have you attempted to change the property value and restarting the service ?
    Restart the config by right clicking on com.sap.portal.epcf.loader. Click Administrate ->restart
    Kindly update me as per your findings.
    Kind Regards
    Troy Cronin - Enterprise Portal Support Engineer.

  • OBIEE 11g Ibots not working properly after Upgrade

    Hi ,
    We are currently upgrading our BI enviroment from 10g to 11g.
    WHile we are configuring Ibots ,they really doesnt work, it gives the below error.
    Eventually succeeded, but encountered and resolved errors...
    Number of skipped recipients: 1 of 3
    AgentID: /shared/test12
    [nQSError: 75006] Failed to send MAIL command. 5.7.1 Client does not have permissions to send as this sender AgentID: /shared/test12
    ...Trying SMTP Delivery loop again... Sleeping for 5 seconds. AgentID: /shared/
    Can any one give us the exact steps to configure ,or if im missing something....we have configured everything in the deployment of the Coreapplication in the business intelligence of the weblogic admin.
    Regards,
    KK

    Hi,
    check with the below link:
    http://allaboutobiee.blogspot.in/2012/03/creating-agent-in-obiee-11g.html
    It may helpful to solve your issue..

  • Bluetooth not working properly after upgrade to iOS4

    I upgraded my iPhone 3g to iOS4 the other day. Apart from running stupid slow now, and even though i've done numerous hard resets, the bluetooth doesn't work properly anymore.
    If I switch off bluetooth, then switch it on, it connects fine. Once I disconnect though, that's it. I have to restart it again.
    Looks like all those complaints about iphone 4 are actually and iOS4 BUG.
    I wish I'd never upgraded now. Actually, that's not true. I wish Apple would help me DOWNGRADE my iphone 3g so i can use it again. I will not go and buy and iphone 4 just cos of this. If anything I'll switch to Android just because a) i'm not a fanboy and b) consumers should not be treated in such a belligerent manner.
    So, anyone know how to resolve this bluetooth issue? It's got to the point where it's dangerous in the car because my phone rings and I have to recycle the bluetooth to connect it.
    Message was edited by: anthonybrooker

    The problem you are having following the upgrade to Leopard (10.5.6) from 10.3.9 is similar to those of people who have upgraded from Tiger, and has been covered by the support document at the link below:
    http://support.apple.com/kb/TS2537
    Your issue will be due to files named to include MessageSorting (which would mean you once have upgraded from a version of OSX earlier than 10.4), remove those, also, but never restore those. You will not have the files named to include MessageRules because you have not used Tiger.
    To find the correct location for the Mail folder, open a Finder window, click on the icon of a house in the Sidebar (this is known often as "Home"), click on Library in that Home user directory, and then to open the Mail folder found there.
    Ernie

  • BExAnalyzer.exe does not work anymore after upgrade to FEP 3

    Dear all,
    after installing FEP 3 I noticed the following behaviour:
    If I try to run the new Bex Analzer from the Menue (Start -> Programs -> Business Explorer -> Analyzer) nothing happens at all. Neither Excel does start, nor the Analyzer plugin is loaded at all. A start from C:\Program Files\SAP\Buiness Explorer\BI\BExAnalyzer.exe) does as well not work.
    But running the Excel macro directly from C:\Program Files\Common Files\SAP Shared\BW\BExAnalyzer.xla starts Excel and the plugin is working as expected.
    So the question is: is it a bug or a feature?
    Best regards,
    Andreas

    I checked all components of the installation and everything seems to be ok. The only thing that I fell over is the statement
    "Ensure that the BExAnalyzer Application has authority to create dll's in the user's temp folder"
    Do I really have to take care of this? How? (I already disabled the virus scanner, but the result is the same - it's not working)...
    Thanks,
    Andreas
    PS: Can someone tell me in more detail, what the BExAnalyzer.exe is trying to do?

  • Display as Key and Name Not working properly after upgrade to Bi7.0

    Hi Bw Guru's
    Recently we have upgrade our BW 3.5 system to BI 7.0 (Only system upgrade not applications ).
    after the upgrade we are facing lot of issues with Bex Analyzer. The following are some of the issues
    1) In BW3.5 after the execution of Workbook or query ,we can convert to local currency .
       Right click on workbook -> Currency translation-> Database currency .
        but after upgrade to BI7.0 this is not working ..
    2) Characterstic Right click on workbook Dispaly as Key and Name is also not working ..
    I know that Currency translation in BI7.0 works in different way compare to BW3.5 .we can use alternate option like By Target Currency from Database currency to convert to local currency and it is working fine in Bex,but businesss users want more friendly way ...because to select the above option they have to enter local currency and rate type ...
    Do you we have any notes available for the above solutions ..?Do we need to upgrade Bex version also..?Is there any document which describe how the above things works after system upgraded to BI7.0?
    Please suggest me..
    Thanks in advance
    Shu Moh.

    Dear Harita
    The first issue Currency translation in query or workbook is solved with SAP note 1119549.For second issue we have not found solution until now ,Once we find the solution we will update you..
    Shu Moh

Maybe you are looking for

  • ICal crashes on startup on my iPad2

    I then Turned off iCloud synching for calendars on the iPad and deleted the calendars. It started up ok and I was able to add an event. When I turned on iCloud synching again, it immediately crashes on start up. The app doesn't die so to speak in the

  • My Macbook Pro shuts off within 5 minutes when just using the battery..why?

    The problem started a while ago, but I never much payed attention to it because I kept the laptop on my desk and connected to the wall. But it started around a year and half ago, when I disconnect my computer from the power source, it might last a li

  • The bar for the website address is just gone, how do i get it back?

    there is no website address at the top ^ it just shows my tabs and under that the toolbar, i cant seem to fix it or find the solution.

  • Call a method/Functio in a class using MouseOver StaticText - Please help!!

    Hello, I have an array of unknown size of Static Text component's of the type com.sun.rave.web.ui.component.StaticText, They're named "st_utp_1", "st_utp_2", "st_utp_3".... so forth. I have a class called "Page1.class" in this class I have a Method(o

  • Reports Developer in Purchasing

    Hi All, I am not a new reports developer but I am new to developing reports for Oracel Applications. Trying to open Standard Reports like POXPRPOP.rdf (Purchase Order) seems troublesome on a client based 6i development environment. Does one customari