NI Goop Wizard not working with LabVIEW 2009

I have added the NI Goop Wizard using VIPM (VI Package Manager) into my LabVIEW 2009 SP1 installation however it is not working. Whenever I select Create New Class from the drop down (same applies to menu selection) nothing happens and the drop down returns to it's default selection. I have tried this on 2 PC's both with 2009 SP1 installed, both exhibit the same unwanted behaviour. One of the PC's also has LabVIEW 8.2.1 installed also with NI GOOP Wizard and this installation works fine.
Anybody using GOOP Wizard with 2009 ?
Cheers
Chris
Don't forget to give Kudo's for a good answer !
LabVIEW Champion
Certified LabVIEW Architect
Certified TestStand Architect

Hi there Chris,
Off the top of my head it's my understanding that NI GOOP wizard is legacy software that was made redundant by the native GOOP tools in LabVIEW 8.2.0 and later.
In light of this it's a bit confusing that everything is working fine with 8.2.1 for you. Is there a version to the NI GOOP Wizard that you are using?
I had a search across the website but I'm afraid I haven't found any other examples or poeple using the GOOP Wizard in LabVIEW 2009 or 2010.
Kind Regards.
Rhys
Applications Engineer
National Instruments

Similar Messages

ActiveX not working with LabView 6.0i Evaluation Version

I am trying to run some ActiveX container samples in LabView 6.0i Evaluation Version.But it is not working and no error message is displayed. Is ActiveX supported in LabView 6.0i Evaluation Version.

[email protected] (pl) wrote in <506500000008000000CD610000-1031838699000
@exchange.ni.com>:
>I am trying to run some ActiveX container samples in LabView 6.0i
>Evaluation Version.But it is not working and no error message is
>displayed. Is ActiveX supported in LabView 6.0i Evaluation Version.
>
Don't know for sure, but with the Student editions this is certainly the
case so it is possible.
The student editions do not allow:
1.AxtiveX
2.External Code (DLL's, CINS)
3. and somethjing else that escapes me at the moment.
Try simple examples such as the MSBrowser and the Adobe PDF reader AX
controls - these always work if Ax is going to work at all.
Not a solution, sorry ;-)
cheers, Alex.
Alexander C. Le Dain, PhD
ICON Technologies Pty Ltd
http://www.icon-tech.com
.au
* The LabVIEW FAQ http://www.icon-tech.com.au/thelabviewfaq.html *

MC-4 Controller Not Working with LabView

I have a Klinger MC-4 Motor Controller and am trying to control it with LabView. I have thus far not been able to get the motor to move with the driver that I downloaded from this website. If anybody has written anything for this same purpose, I would greatly appreciate your insight. Any help with this problem in either LabView 5.1 or 6.0 would be great. Thanks.

Hello-
It may be possible to modify the existing driver to work with this instrument. Otherwise, drivers are developed and modified based on demand and popularity so the more requests, the greater the possibility that one will be modified. Please send an email to [email protected] about this issue. It would also be beneficial to notify the instrument manufacturer.
Randy Solomonson
Application Engineer
National Instruments

At-mio-16xe-50 does not work with labview

I am putting together another system. I set the daq board with the values recorded from the first system using ni-daq. The setup passes the test in ni-daq. I get the correct readings using ni-daq, but when I go to my labview application I do not get the right readings. The readings seem to be just noise.

In my experience if you get a correct reading in a test panel in MAX you should get the same reading in LabVIEW. Are you using virtual channels? How are you viewing the data? If you are looking at the data in a chart, is the chart auto-scaling making the signal appear to be noise? What type of signal are you reading (analog, digital, etc.)? Have you changed the default input limits for the board? Is the signal you are reading a constant source? If you are able to answer some of these questions it might be able to give you a more definitive answer.

Auto update typedef not working in LabVIEW 2009

I was creating a type def for a customized button control and trying to figure out what action went with each of the 6 different picture images. In the process, I found that the only way I could get my VI to auto-update the control was through using a strict typedef. The auto update from typedef was selected, and the VI would be broken everytime I went to modify it until I saved and closed the control, but the control on the VI would not be auto updated. I would have to replace the control to activate the change (similar to what I would need to do if the control was configured as a control and not a typedef) This may be a bug that needs to be looked into, but I don't know where to make a bug report.
I did find the solution to which picture image went to which action, the help files only explained 4 images. I'll post what I found here just for reference. The images are in the following order on the right click menu:
1 2 3
4 5 6
With the following explanations for each:
1. False Case
2. True Case
3. True-to-False Transition Case (time between mouse click and the release of the click)
4. False-to-True Transition Case
5. Mouse Hover Case when False
6. Mouse Hover Case when True
-Mike

astromike wrote:
Then that makes sense. I'm currenlty only dealing with the appearance, I haven't dug into the Block Diagram on this one yet. I was trying to get the appearance of the button to act correctly first, but I didn't have a good explanation of which image state did what. Each time I tried to change it, I thought it would update on the Front Panel with the "auto update" checked. At one point yesterday I did have the right images on the right states, but didn't see the change because it was only a typedef. I'll keep it as a strict typedef and am glad to hear that it was with how little I understand these custom controls when used as a visual control.
We definitely do not want the image traveling inside the Block Diagram.
Here is my Nugget on Type defs. There may be something in there that can help you. At the tail end I mention default values and ways to handle them.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Will our existing drivers work with LabVIEW 8.x?

We have drivers for some of our DAQ products that were developed in LabVIEW 6 or 7.
Is there any reason these drivers would not work with the latest versions of LabVIEW?
We ask because there seem to be some customers in Europe who believe our drivers do not work with LabVIEW 8.5, but we know there are users with LabVIEW 8.0 and 8.1 using the drivers without problems.
Any thoughts or suggestions, or are there any known issues with older drivers in LabVIEW 8.5?
Regards,
Roger Hammerquist

Hi Roger,
In general, the latest versions of LabVIEW will work with older
versions of the DAQ drivers. However, it is certainly possible that some of
the older drivers could have some conflicts.
How “old” are the driver versions that your customers are
using? Specifically, what version of the
driver does your customer report seeing the errors with? Is the
customer using the same operating system that the original program was written
for? Is the customer seeing problems
upgrading the VIs from LabVIEW 6 or 7 to LabVIEW 8.5?
The suggestion to work with someone to try it out is excellent.
Posting the specific driver versions
seeing the conflict, might also shed some light on the issue.
Jared T.

Labview 2009 .exe not working with windows 2000

I created a simple vi with Labview 2009 to reset a counter in registry key. I changed it to an exe. The program runs fine on any machine with XP but it does not work on the machine I need it on which is running Windows 2000 SP4. I installed the 2009 runtime but I continue to get an error when it starts up saying the vi is not executable and that I need the full development to fix the errors. But like I said it works every where else. I've tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi that is not compatible with Windows 2000?
Thanks
Solved!
Go to Solution.
Attachments:
Serial Number Reset Cell 2.vi ‏15 KB

There was an issue with building DLLs on Windows 2000 - http://digital.ni.com/public.nsf/allkb/431C9BD8F3482033862576A90073441F. Since you say you are trying an EXE, this may not be applicable.
George M
National Instruments

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

Labview 2012 (64bit) not working with ActiveX and MSAccess

I have a program developed to open a MSAccess database file and import data using ActiveX commands. The program works with LabView 2012 (32bit) but fails on the ActiveX open command when using LabView 2012 (64bit). I also have the application built as an EXE and it works fine in a windows 32 bit environment (XP or Win 7-32bit) but fails when run on Win 7-64bit. I isolated the error down to the Active X automation Open VI.
Anyone have a solution for the incompatibility?
summary
1.) VI and EXE works on XP and Win 7-32bit
2.) EXE fail on Win 7-64bit.
3.) VI works on Win 7-64 bit with LV 2012 (32bit)
4.) VI fails on Win 7-64 bit with LV 2012 (64bit)

It looks like you are trying to load a 32-bit DLL from a 64-bit OS. Do you have a 64-bit version of access installed? You'll need to change to that. On the other hand, ActiveX with Access is so slow. You can speed things up considerably by using ADO (i.e. NI's Database Connectivity Toolkit or something like LabSQL).

Looking for a way to get my Product ID and Vendor ID so I can enable my Radium 49 USB MIDI keyboard to work with Labview 7

Looking for the Product ID and Vendor ID for my Radium 49 USB MIDI keyboard to work with Labview 7
Is there a tool to find out the Vendor ID and Product ID for a USB device?
Example: of what I'm looking for
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The
USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093)
(that is decimal 4243).
Thanks for all the fast responses this newsgroup RULES!!!!!!!!!!!!

http://digital.ni.com/public.nsf/allkb/335A90747734097886257070006415B9
How To Find The Vendor and Product ID for USB Devices?
Primary Software: Driver Software>>NI-VISA
Primary Software Version: 3.3.1
Primary Software Fixed Version: N/A
Secondary Software: N/A
Problem:
I want to make an NI-VISA driver that requires the vendor and product ID?
Solution:
There is a utility called USBView,
free from Windows, attached below, which you can use to view what is
connected to your computer's USB ports. It is necessary to load this
program and connect the USB device in development. Upon selecting the
device in USBView, one can then look on the right side of the
application window to obtain the Product ID and Vendor ID. This will
allow you to enter in the correct IDs when creating a driver .inf file
when using the VISA Driver Development Wizard. For more information
about how to use the VISA Driver Development Wizard see the related
links below.
Note: It is necessary to keep the hexadecimal
(0x####) format. Do not remove the "0x" hexadecimal format preceding
the ID number.

[LAVA Cross Post] CTRL+SHIFT+ Shortcuts sometimes not working in LabVIEW

Cross-post from LAVA: http://lavag.org/topic/15619-ctrlshift-shortcuts-sometimes-not-working-in-labview/
See the above post for more information - here's a synopsis:
CTRL+SHIFT modifiers are not working while running LabVIEW in a Parallels 7 virtual machine. This problem affects both LV2011 and LV2012. I'm not certain that this is a LabVIEW bug - could be an issue with my virtual machine environment or it's configuration - except that CTRL+SHIFT modifiers work in other applications on the affected VMs. It's just LabVIEW that appears to ignore shortcuts with the CTRL+SHIFT modifiers.
Any ideas?
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

X. wrote:
Still well and alive in Parallels 9 and LabVIEW 2013 SP1. Of course I could upgrade to the latest versions to check whether things have gotten any better.
Any news on that?
@mellroth figured out the solution :-)
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Why CUA (Release 7.00) is Not Working with Old Clients(Release 4.6C, 4.5B)?

Hi all,
We have CUA (release 7.00) that is not working with older release clients. I implemented 2 release 7.00 clients to CUA; they both work fine. However, when I implement some older release clients (like, 4.5B, 4.6C, 6.20 and 6.40) to CUA, I can only create ID and pull out to client, but roles do not go through.
It is kind of argent.
Do anyone know how to fix it????
Thank you for reading this.

> It is kind of argent.
I think you meant "ardent"...
THe word u r g e n t is blocked by our content filters, because a while back everything was like that and these forums are actually discussion forums...
Anyway, sounds like faulty config or perhaps a problem with logical system assignment.
Have you checked that? Also check in SCUL?
That you can create users but not assign roles might also be that in the lower release systems they are checking activity 22 (assighn) AND 02 (change) to assign the role. Doesn't make sense, really....
Check the drop down menu in table PRGN_CUST for the option to change this, and compare whether the settings are different.
Cheers,
Julius
Edited by: Julius Bussche on Jul 30, 2009 11:34 PM

Drag and Drop not working with spark HGroup with code

Can anyone tell me why my HGroup won't fire the dragEnter dragDrop and DragOver events?
Here is the sample code:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
    <fx:Declarations>
        
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            import mx.core.IUIComponent;
            import mx.events.DragEvent;
            import mx.managers.DragManager;
            private function dragEnterHandler(e:DragEvent):void {
                DragManager.acceptDragDrop(e.currentTarget as IUIComponent);
            private function dragOverHandler(e:DragEvent):void {
                DragManager.showFeedback(DragManager.COPY);
            //user drops src onto target, so re-parent the src to the target
            private function dragDropHandler(e:DragEvent):void {
                var img:Image = e.dragInitiator as Image;
                var newImg:Image = new Image();
                newImg.load(img.source);
                var grp:HGroup = e.currentTarget as HGroup;
                grp.addElement(newImg);
            private function mouseDownHandler(e:MouseEvent):void {
                DragManager.doDrag(e.currentTarget as IUIComponent, null, e);
        ]]>
    </fx:Script>
    <s:layout>
        <s:HorizontalLayout />
    </s:layout>
    <s:Panel width="50%" height="100%" title="Drag me">
        <mx:Image source="http://www.google.com/intl/en_ALL/images/logo.gif" mouseDown="mouseDownHandler(event);" />
    </s:Panel>
    <s:Panel width="50%" height="100%" title="to Here">
        <s:HGroup width="100%" height="50%" dragEnter="dragEnterHandler(event);" dragDrop="dragDropHandler(event);" dragOver="dragOverHandler(event);" />
        <s:HGroup width="100%" height="50%" dragEnter="dragEnterHandler(event);" dragDrop="dragDropHandler(event);" dragOver="dragOverHandler(event);" />
    </s:Panel>
</s:Application>

Derek,IE11 is having some compatibility issues with the share point.Apart from IE11,it should work on IE10,9 and Firefox and chrome as well.
Please check the links below that explains the issues with IE11 and the functionality of Drag and drop and limitations as-well.
1.Since SharePoint 2013 fully support IE 32-bit version above 7, there might be compatibility issue with other browsers. I’d recommend you use IE 8,9,10 32-bit for optimal Performance.
2. Open the same document library in Internet Explorer as this functions does not work with Firefox or Chrome by default
3. Make sure the IE (Internet Explorer) Version should be 32-bit and not a 64-bit
http://expertsharepoint.blogspot.de/2014/08/issues-with-sharepoint-2013-and.html
http://expertsharepoint.blogspot.de/2013/12/how-to-upload-multiple-documents-in.html
http://expertsharepoint.blogspot.de/2013/12/sharepoint-server-2013-drag-and-drop.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Magic Mouse Not Working with Boot Camp.

Hi All,
I have a wired issue here. I installed Windows XP on my iMac 27" using bootcamp and all worked fine till one day my Magic Mouse stopped working in Windows. Now the funny part is windows is able to detect my mouse and says that the device is working normally but the green light under my mouse is OFF. No matter what i try i cannot get it to come on. But the moment i boot to Mac OS X the mouse works perfectly fine. My Apple Wireless KB works just fine in Windows. A USB mouse also works fine. I have also installed Parallels on my Mac and when i boot into the Windows partition using Parallels the Magic Mouse works fine. Any idea as to whats going on here.?
John.

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

[svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

NI Goop Wizard not working with LabVIEW 2009

Similar Messages

Maybe you are looking for