NI_IMAQ IEEE-1394 bug?

I am starting to familiarize myself with the new v2.0 IEEE-1394 firewwire camera driver VI's and have been working with the property nodes that have replaced the IMAQ1394 Attribute & Attribute Inquiry VIs. I have managed to build a VI that will quite repeatably crash LabVIEW.
It requires:
1) a query of a camera attribute property that is recognized by the property node but not by the camera.
2) a subsequent query of another camera attribute property.
Has anyone else seen this?
An example (for LV 7.0, IEEE-1394 v2.0.0) is attached.
Attachments:
Crash LabVIEW.zip ‏27 KB

Hello Warren,
Thank you for using our discussion forums. I have taken a look at your VI and seen similar behavior as you described. I noticed that if you remove the bundle by name from the case structure the problem seems to disappear, let me know if you see a similar behavior. Otherwise, I am trying to investigate the problem and will get back with you as soon as I have any updates. Thank you for your patience and have a great day!
Regards,
Nipun M
Applications Engineer
National Instruments

Similar Messages

  • Cant Grab Image in M&A through IEEE 1394

    HI I am trying to hook up my prosilica camera through Measurements and Automation.  I have connected my IEEE 1394 Device to my local port sucessfully and I have connected to NI_IMAQ IEEE 1394 IIDC Digital Camera sucessfully through the driver.
    I have configured the camera to the specification from the prosilica website but i am getting no picture, just a black screen.
    how do i collect images? now that i am connected to the camera, do i need to switch some onther settings?
    thanks
    Kelli

    Hi Kelli,
    If you are getting a black image and not getting any time
    out errors then you are receiving data from your camera, but we may need to
    change a few things to get more light in. 
     One thing you can try is opening
    the aperture more on the on the camera itself. 
    Also in Measurement Automation Explorer (MAX) you can increase the
    shutter time (or exposure time), turn up the brightness, or increase the
    gain.  Be careful with turning up the
    gain, this will amplify the signal that you are reading, so it will also
    amplify your noise.  Most of these changes
    can be made while performing a grab in MAX. 
    That will help you set everything so you will get the best picture
    possible.  Let me know if this helps.  Have a great day.
    GG

  • How to connect a DV camera through the IEEE 1394 port on my A50?

    Hi
    I have been trying to connect a video camera to my notebook SA50-109 throught the IEEE 1394 port.. but the notebook didn't recognize the camera at all..
    although the camera shows 'DV-in' when i plug the cable witch is (4-pin to 4-pin) DV cable..
    is there any thing I need to do before to make it work?
    any ideas.. please?

    Hi there. Your PC should recognize automatically the DV camera. It's OK to have the firewire (1394) connection shown under "network connections". Next to mine it says "connected" although the harddisk connected to it is switched off. Maybe there is something wrong with the cable? Or, another suggestion, try to restart the laptop while the camera is connected ... Not many further suggestions I'm afraid ... Good luck!

  • I am using IMovie 11 with a new iMac.  Unable to import video from a Panasonic PV-GS400 mini-DV camcorder using a Firewire IEEE 1394 400 cable connected to a Firewire 400 to 800 adapter which is then connected to a Thunderbolt to Firewire 800 adapter.

    How can I get iMovie to recognize my Panasonic PV-GS400 as a device so I can import video to my iMac?  I have a FireWire IEEE 1394 400 cable connected to the camcorder.  Since my new iMac has only Thunderbolt ports, I purchased a Firewire 400 to 800 adapter to connect to the cable.  I also purchased a FireWire 800 to Thunderbolt adapter to connect to the computer.  My camcarder is still not recognized.

    I would suggest that you try a 9 pin to 4 pin Firewire Cable along with the Firewire to Thunderbolt adapter.
    Those Firewire 400 to 800 adapters do not seem to work well with iMovie.
    The 9 pin to 4 pin cables are available at reasonable prices here, for example.
    http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2

  • How do I know if my T400 is with or without IEEE 1394?

    My Lenovo automated diagnostics determined that the BIOS software on my T400 is flawed, and that I should download a replacement BIOS. 
    The page that I am led to gives me a choice of two different BIOSes:  
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-74161&selectarea=SUPPORT&tempsel...
    One choice is T400's "with IEEE 1394, Package 3.09-1.05" and
    the other choice is T400's "without IEEE 1394, Package 3.10-1.05" 
    How should I decide which BIOS to download?    
    Thanks,  Bob W  31 Aug 10   1153 MDT. 
    Solved!
    Go to Solution.

    Take a look at the front of the machiine, extreme left, just under where your wristwatch band is w/fingers on the keyboard.  There's a small socket there (to the left of the radio on/off switch) labelled "1394" if you have same.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • HDX 18/dv8t IEEE 1394/Fire Wire performance problem in Win 7

    The IEEE1394 interface lives on the PCI express bus at IRQ 16, which is shared by several other devices. Audio interfaces, such as the M-Audio Pro Fire and Fire Wire series do not work reliably with the shared IRQ. In Vista, by comparison, the IEEE 1394 interface has its own IRQ, and seems to run more reliably.
    Any ideas on how to fix this?

    Well, I found a workaround for my issue. It's described in this article:
    [url="iPod not recognized correctly on Toshiba laptop"]http://docs.info.apple.com/article.html?artnum=300836[/url]
    By disabling the "Sandard Enhanced PCI to USB Host Controller" in device manager, my iPod was correctly recognized and I was able to sync with iTunes. That's the good news.
    The bad news is that: a) Windows warns me that my "device can operate faster if connected to a USB 2.0 port" - and the sync with iTunes runs slowly; b) if I reanable that USB device (as suggested in the Apple article, my iPod is no longer recognized.
    For now, I'll just disable this device when I need to sync, then reenable it when done. But this is going to be a pain. I really don't consider this a fix. It's really annoying that the iPod is the only USB device that requires this kind of nonsense.
    Looking forward to a "real" fix for this some time soon.

  • NI-IMAQ for IEEE 1394 hardware compatibilities

    Need to check if the following camera can work with NI-IMAQ for IEEE 1394?
    http://www.ptgrey.com/products/dragonfly/index.html
    thank you
    Attachments:
    dragonfly.pdf ‏1052 KB

    If you look at How Can I Tell If My IEEE 1394 (Firewire) Camera Is Supported by the NI-IMAQ for 1394 you will find the dragonfly listed there.
    You will also find a reference to Digital camera specification: 1.3 in the camera data sheet which confirms this.
    Hope this helps!
    Amaury
    NI Applications Engineer

  • Missing camera attributes with the NI IMAQ for IEEE-1394 driver

    I'm using an ORCA-AG and the IEEE-1394 driver. When i look at the camera attributes (either with MAX or the attribtue inquiry vi.) i can see just some of them (brightness, shutter,...). I have tried the ORCA-ER, which has the same attributes, but uses the PCI-1424 framegrabber. Using this camera i can see and modify more attributes (light mode,...). How can i modify them with the IEEE 1394 driver?
    I also have another problem. When i use 1x1 binning the image must be 8bits, if is use 16bits, max cannot aquire the image (timeout error). Does anyone have the same problem?
    Thank you very much.

    Some non-standard attributes can be modified by directly reading and writing to the memory of the camera. Your camera manual probably has memory locations listed for the different attributes. You can get to these using the low level firewire routines. I have done it once or twice.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • My macbook's mini displayport is actually a IEEE-1394 Firewire port..

    I jut got a mini displayport to DGA cable today and pluged in to my macbook but no signal to the external monitor.
    I took a good look at the side of the macbook, and the mini displayport (supposed to be) has a mark of IEEE-1394 Firewire simble on top of the port.
    left next to this port has a monitor simble but it is a different shape (got a longer tung).
    Can any one tell me what is wrong?
    By serching the web, they all say (and all look like) the one I pluged in is the mini displayport.
    I'm panicking....

    Glad I could help. Here's the EveryMac page on your MacBook if it's a White 2.1Ghz. http://www.everymac.com/systems/apple/macbook/stats/macbook-core-2-duo-2.1-white -13-early-2008-penryn-specs.html
    Unless it's a White 2.4Ghz http://www.everymac.com/systems/apple/macbook/stats/macbook-core-2-duo-2.4-white -13-early-2008-penryn-specs.html
    Or a Black 2.4Ghz http://www.everymac.com/systems/apple/macbook/stats/macbook-core-2-duo-2.4-black -13-early-2008-penryn-specs.html

  • Can I link my two laptops using IEEE 1394 (Firewire)​?

    Hi,
    I have a X31 and a X60 laptop. Both are running on Windows XP Pro and both have IEEE 1394 (firewire) ports.
    I seem to read it somewhere that I can do a network link between two laptops via the firewire ports.
    However, it does not work for me after linking them with a firewire cable.
    Am I missing something?

    Am I missing something?
    You have to configure the IPs on the both side as with any other network adapters.
    Alternatively you can set the internet sharing to the  fireware adaper, on one side only so the pc with internet shared will acts as DHCP server and the other will atutomagically configure itself with a correct IP.

  • T61p - IEEE 1394 (Firewire) port does not show up in device manager in Windows 7 x64

    I have a T61p.  On the front, in the left corner, right next to the wireless on/off switch, is a IEEE 1394 (Firewire) port.  However, if I plug anything into it, it's not recognized by Windows, and if I go into the device manager in Windows, there is no IEEE 1394 host manager or ports or anything listed there.
    I have rebooted and gone into the BIOS, and I don't see anything in there about 1394 either.  Is the port there, but the hardwire inside is missing?  Do I need to enable it somehow?

    Let me clarify that.  I have something in the device manager called "SD Host Adapters", and under that "SDA Standard Compliant SD Host Controller".  That thing has a Microsoft driver.
    However, under "IDE ATA/ATAPI contollers", I do see "Ricoh Memory Stick Contoller", "Ricoh SD/MMC Host Contoller", and "Ricoh xD-Picture Card Contoller".
    I also have "PCMCIA adapters" that has "Ricoh R/RL/5C476(II) or Compatible CardBus Contoller".
    So, it would seem I have the right drivers for the card reader, I'm just missing anything for the IEEE 1394 contoller...

  • Connecting IEEE 1394 & I394b

    I have a mid-2010 27' inch IMac and I would like to connect it to my cira 2001 Yamaha CD External Recorder.  Both have firewire the Yamaha is IEEE 1394 and Mac is 1394b. Is that possible?  If so, what wires and/or adapotors do I need to get to make everything work. 

    1394 is probably 400 (6 pins) and 1394b is 800 (9 pins). Do you have your Yamaha manual? It will tell you which Firewire port and cable you need. If you don't, you can Google the burner model number to find out. Sounds like you have 400 on the CD burner and 800 on the iMac. The 800 will slow to 400 when connected. Since the burner is 400 that can't be helped. You can get an 800 cable and a 800 to 400 adapter.
    One way to solve it would be to go to a Best Buy that has an Apple Store inside, with your burner in hand, and show it to the guy/gal and tell him/her what you want to do. The cables won't be cheap there. You can look and then order online, or just buy there and be done with it.

  • P30: External HD isn't detected when using IEEE 1394 cable

    My P30 won't/ can't detect my newly aquired Western Digitak Extreme Lighted Drive 320GB when I connect it via the firewire port. I use a 6 pin to 4 pin cable (which cost a fortune, by the way) that is supposed to be a way to connect this drive to a pc.
    My ieee 1394 driver seems to be called "VIA OHCI Compliant IEEE 1394 host controller".
    Can anyone tell me what to do? I really need to connect this drive by firewire because I need the USBs for other devices.
    Thank you!

    This may sound like an obvious problem, but is the drive:
    1. Set to Master on the jumpers?
    2. Formatted?
    If the drive is not set to master, the computer will not recognise it using 1394. And if it is set to master, but it has not yet been formatted, the computer will register that something using 1394 is connected, but will not know what to do. To format you right click on My Computer, and select manage.
    Mike

  • Firewire to Thunderbolt adaptor. 6-pin IEEE 1394 firewire for video transfer

    Will the Apple Thunderbolt to firewire adaptor work with a IEEE 1394 6-pin firewire for video transfers?

    You'll need a Firewire 800 (9-pin) to Firewire 400 (6-pin) adapter or cable, but yes, it should then work.
    Regards.

  • Solaris 10 x86 Firewire (IEEE 1394) camera frame grabbing

    How do you do frame (sequence) grabbing from Firewire (IEEE 1394) camera on Solaris 10 x86? What API can I use?
    XIL documentation doesn't seem to mention Firewire cameras specifically. And I tried to compile Linux libdc1394 on Solaris 10 x86, but got errors.
    Thank you.

    Hello Mark,
    these forums are user-to-user.
    If you work for Caen Engineering, Inc. I would strongly recommend that you contact Sun directly as an OEM.
    Unfortunately you didn't mention the particular blog you referring to.
    A quick search ("Solaris firewire") on blogs.sun.com returned the following blog entry from January 2006
    Firewire in Solaris: The Good, The Bad and The Ugly
    Michael

Maybe you are looking for

  • Folders on NAS read-only. Can't change

    I have a buffalo linkstation pro duo NAS. It is formatted in XFS. It seems that randomly some folders have been changed to read-only, when they were previously read-write. I have one folder that is stuck in a read-only state. The folder contains some

  • [svn] 4267: Change path to Assets.swf in eclipse . project file from full hardcoded path to use the FLEX_SDK variable as the base path .

    Revision: 4267 Author: [email protected] Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008) Log Message: Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issu

  • OPS$ User question

    Please consider the following case : I have a system where all its application users are OPS$ users , which mean that they get there credential from the OS. The users are create as followed : create user YYYYY identified externally default tablespace

  • Handling of international char in WTC

    Hi, we have a problem with our swedish letters when we send them (as 8-bit ASCII-strings) from a TUXEDO application to a WLS. The strings shows 'funny' values upon reception (we send the strings in FML-buffers). We reckon this has to do with encoding

  • Ma la qualità degli alimentatori Apple?

    Da parecchio tempo per il mio lavoro utilizzo i sistemi Apple e sono stato sempre soddisfatto dei risultati, anche il supporto clienti è operativo. Una segnalazione negativa che vorrei fare riguarda l'alimentatore, in particolare quello in dotazione