Ni PCIe1433 board card can't detcet recognizable video source

hell0 everyone! my PCIe1433 and basler spl2048 camera has linked.But when i press the 'snap'button,the window shows"can't detect recognizable viedeo souce" ,the error code is 0xBFF6001F.Anyone else kown what's the matter?

Try to unplug and plug the cables. I had issues similar like this, but when I unplug and plug the cables, it starts working again. 
Good luck. 

Similar Messages

  • Error 1074397153 Cannot Detect Recognizable Video source

    I'm using a single PCI1410 card to acquire images from two cameras and display those images in Labview using the Multiple Camera Acquisition.vi found on the NI website.  I'm running Windows XP, and my two cameras are Sony XC-HR70's with a resolution of 1024X768 each, running ~15FPS (total for both) thru the frame grabber.  I have one camera as a master, supplying the HD & VD synch signals for both my slave camera and the PCI1410.  Here is my problem:
          Whenever I change the light intensity for the cameras drastically (ie, abruptly shutting off the light source or blocking the camera), I get an error in Labview:  "1074397153 @ IMAQ Extract Buffer.vi.   NI-IMAQ: Cannot detect recognizable video source".  If I perform a gradual decrease in light intensity, I don't get the error.  Unfortunately, the users often need to toggle on and off my camera illuminators abruptly, so a gradual transition is not an option.
           I thought this was a MAX issue, but it is not-MAX gives no errors regardless of light intensity.
           I also tried decreasing the white level and/or increasing the black level-(per NI Knowledgebase post) all that did was decrease my image quality, error still appeared.  The error first appears in imgwaitforimaqoccurrence.vi which is inside imgsessionexaminebuffer.vi. 
    If I could somehow ignore the error and insert a ~ 500mS delay and then re-attempt to acquire video lock, it would probably work.  Just not sure how to do this, or if it is the right approach.  Any ideas?

    Hey wowens,
    I was wondering if you ran just a simple grab example program, and perform the same action of shutting off the camera's light source, do you get the same error? The error you are getting means that the frame grabber is not receiving any data from the camera in the expected timeout period. There shouldn't be any reason why decreasing the light quickly should stop the camera from sending data, as the camera should still be sending some data, like all black pixels or something. I might suggest tapping the data coming in with an oscilloscope to see if the data stops when you decrease the light. If you can't do this, I might suggest altering the code so that you don't stop the loop. You could also look at the shipping example called LL Scan Multiple Channels.VI. What version of the NI-IMAQ driver are you using? I would suggest that you upgrade to the most recent if you don't have it. Other than that it sounds like you need to find out what is causing the error before you start to find a solution.
    I hope this helps at least a little. Let me know if you have any questions or concerns. Thanks, and have a great day.
    Regards,
    DJ L.

  • Error 0xBFF6001F - Cannot detect recognizable video source

    Hi,
    I'm using a NI PCI-1433 card with a Sentech camera.
    When I try to get a snap from the camera in MAX, I've the following error : 0xBFF6001F - Cannot detect recognizable video source.
    I use the icd file given by the camera constructor (Alliance Vision) for the camera parameters.
    I have Labview 2012 SP1 and MAX 5.4.0.
    Has someone any idea ?
    Maugan.

    Hi Maugan,
    Did you already look at this KB?
    Best regards.
    Paolo_P
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Travaux Pratiques d'initiation à LabVIEW et à la mesure
    Du 2 au 23 octobre, partout en France

  • Can't connect JAI CV-M1 camera to PCI-1409. Error: 'Can't lock on video source'

    I am connecting a JAI CV-M1 camera to a PCI 1409 card but I can't kill the error message 'can't lock on video source'. Does anybody has the right interface and camera files for me (*.iid and *.icd)? Thanks...

    Hi, I had a customer that used that camera , the configuration files are available in NI site , but you need to connect NOT only the BNC but in addition you need to connect PCLOCK pin because Pixel Clock is not standard.

  • Error 1074397153 "cannot detect recognizable video source" in LabVIEW environment and but not in NI MAX

    Hi all,
    We have first tested our cameralink camera using NI MAX and we were able to grab with out any error.
    But when we are getting the  Error 1074397153 "cannot detect recognizable video source" in LabVIEW environment when we wanted to acquire from a 16 bit Cameralink standard camera. we are using Labview 2013 SP1 and Vision development module with  IMAQ 4.9 driver. Below is the VI pasted
    All the camera cables, power cables to the camera are fine.
    Kindly let us know what is the issue and any solution to solve it.
    with regards,
    Sri

    -What camera you are using? Did you try with any other software provided with camera vendor?
    -Did you check proper interface name?
    -Please post MAX screenshot also will be better to understand the changes...
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

  • Can PE3 synchronize two video sources for post edit AB roll?

    In PE3, is there a way to synchronize two digital video files (AVI) to create a AB roll type post edit.  My two captured video files seem to have different frame speeds or frame durations.  How do I align and frame match 2 video sources?  The situation is a 2 camera shoot.  How to best create an AB roll edit of the 2 videos sources with audio from one video file as the common element?

    Wes,
    Armed with Steve's article, you should be able to do what you want.
    I've got a question, and maybe a suggestion to address the frame-rate problem early on, to help solve that problem without a lot of fiddeling. What are the two frame-rates? G-Spot will tell you exactly, if you can not find this in Properties. If the source files are DV-AVI, they should be of the exact same frame-rate to begin with, but if one is off a bit, I'd convert the non-DVD spec one to match. First place I'd try this would be to simply Interpret Footage in the Project Panel. If that does not work, then Windows Movie Maker can do this for you, or you can use other conversion tools to get them to match. I use DigitalMedia Converter, but it's not freeware. Getting the two sources into perfect sync in the beginning will go a very long way to achieving success.
    Good luck,
    Hunt
    [Caveat] I do not have PE3, only PE4, but I think that this will apply to your version.
    [Edit] After reading Steve's article, the one thing that I would do (after establishing sync) to assist me in editing multi-camera would be to set the Video Track Display to show all "frames" and the expand the height of each of the two Video Tracks (VT's), so that they occupy most of the vertical real estate in the Timeline. Then, I'd zoom in on the horizontal display of the Timeline, so that I could see fairly clearly, each frame. This basically makes the Timeline like a detailed Sceneline, but keeps you in Timeline Mode. Because you do not have the Multi-camera Mode that PrPro does, you will not be getting anything but your upper Video Track footage in the Program Monitor. You will be viewing the footage ON the Timeline. This WILL necessitate a lot of horizontal scrolling on the Timeline, but is doable. Then, when you wish to be using the footage from VT1, you will cut out (Sissors Tool) the overlaying footage from VT2. I'd personally arrange my main footage (like the main Audio Track in Steve's article) on VT1, and my "cutaway" camera's footage on VT2. As VT2 takes prescedence over VT1, you can leave VT1's footage pretty much alone, and just cut the footage on VT2. I would use Cross-dissolves on the Head and Tail of the the "cut" Clips on VT2. Remember that if you use these, you will want to make sure that the cut has come where you want the scene on VT2 to absolutely start, or end. The Duration of the Cross-dissolves will determine when the scene either becomes 100% visible (Head), or 100% invisible (Tail). Also, remember that Dip-to-Black on VT2 takes the image on VT1 to black, hence my use of Cross-dissolves.
    Using this method, also allows one to do a bit of nudging of the Clips (cut from the original) on VT2, to compensate from any loss of sync. Though you could possibly use this to adjust for the differences in framerate, I'd still try to get the footage as exact, as is possible, to start - a lot less work that way. Also, once the "holes" have been cut into the footage on VT2, you can start to use the Program Monitor much more.
    As Steve points out, PrPro makes it easier by locking Tracks and a Multi-camera dual monitor, when in Multi-camera Mode.
    This was exactly how we did it with film, except that we had to splice in black leader, where the cuts were made, and could not keep our VT1 footage intact, as we can with an NLE and video. Since we were dealing with sprocket holes, we had spiked gears (sprockets)  on a "sync block" and once we'd get the alignment right, would physically flip down a guide, that would "lock" the film to those two rolls of film to the sync block. Even though it sounds tough, when you read it, it's really not, and so very much easier, than it was with film.

  • Can Flash Player Recognize Video from Capture Cards?

    I would like to have Flash Player recognize the input from an Osprey video captue card. Is such a thing possible?

    Hi s, well congrats on getting your brother's computer up and running. On your system, you have all correct Flash Player
    files for IE and FF, as well as the SWO and SWF.
    Since the Install of Flash Player, have you installed any programs that would have added any ActiveX Controls, or any other add ons or plug-ins?
    Have you had an opportunity to see if your brother's computer has the issue you have when watching the same websites?
    Are you using any ad-block in FF(Firefox) or any pop up blocker software installed?  I can't imagine updating to FP version 10 alone would cause this.
    Is this happening only on the BBC website? Does what you watch come thru the BBC website or youtube directly?
    We have your brother's computer to use to determine what is going on. If he is able to see the BBC website and what you
    are having problems with, then we can rule out the website.
    Other browser add ons, anti-virus programs, etc. affect the browser. Even tho, no problem with vs 9. Sometimes updates
    can have an affect, even with Windows as we all know:-)
    Thanks,
    eidnolb

  • Quicktime 10 doesn't recognize external video source.

    Setting up my new 27" iMac, and discover that Quicktime 10 doesn't recognize an external video source fed in through the firewire port. It is an older Sony analog to digital video converter, and goes through a FW400 to FW800 converter. Quicktime doesn't even "see" that video source as a choice when recording, nor does iMovie, even though it shows up in the System Profiler.
    Apps that were ported over from my previous system, however, such as "Video Viewer" and "Final Cut Pro" do see the source, presumably because they were configured to do so on the old system.
    Is there some global settings file that I can edit, or something similar that I can do, to make it visible to all apps?
    Thanks!

    Hi,
    Quicktime 7 does recognize the video source, but newer apps, such as iMovie, won't. I'd like to be able to capture to iMovie, but can't without the video source being recognized. Is there a fix?
    Thanks!

  • How can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

    how can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

    To sync photos from a Mac or Windows PC to your device using photo applications
    Make sure you have the latest version of iTunes installed.
    In iTunes, select your device's icon in the Devices list on the left.
    Click the Photos tab.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
    If you want to sync all your photos, enable the option for "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, or faces, enable the option for "Selected albums, events, and faces" and then select the albums you want. If syncing on a Mac with iPhoto version 6.0.6 or later, you may enable the option to "Include videos" to sync videos directly from iPhoto to your device. (Requires iOS 3.0 or later).
    Click Apply.
    To sync photos from a folder on your hard disk to your device
    Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on your device, create folders inside the main folder and drag images into the new folders.
    In iTunes, select the device icon in the Devices list on the left.
    Choose "Sync photos from."
    Select Choose Folder from the pop-up menu and choose your main image folder.
    Click Apply.

  • What if a person no longer has access to the house in which the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?

    What if a person no longer has access to the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?

    What pops up is the page that tells me I can use my camera to take a photo - since I don't have access to the card, useless.  I am caught going round in this loop - there's that one button, no other option.  Thanks in advance. 

  • Can the iPad2 receive video clips from an Eye-Fi Pro X2 card?

    I had success using the Direct Connect mode to send PICTURES from my Eye-Fi card to the iPad2, however it would not recognize video files either from my GoPro HD HERO2 or my Canon G12 powershot. Are other people having this issue?

    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Another way to import videos. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
     Cheers, Tom

  • Where on the card can I find out if it is a NB-MIO-16XL vs. 16XH

    Where on the card can I find out if it is a NB-MIO-16XL vs. 16XH

    Greetings,
    The part number can be used to obtain this information. It should be of the following form: 777227-01. Let me know the part number of your board,and I can tell you which of these two devices it is.
    Spencer S.

  • Which DAQ card can give accurate specified sampling rate

    Dear friends:
    I have an application to sample the data from an analogue device with user specified sampling rate, e.g.171KHz. May I know which NI DAQ card can specify any sampling rate below 200KHz within tolerance  of inaccuracy of 1KHz? Appreciate for your help
    Andy   

    Do you need both accuracy *and* precision?  
    Precision will largely be determined by quantization effects as the sample clock must be an integer divisor of the board's master timebase.  For example, the 6259 M-series board that I commonly use has an 80 MHz master timebase which can be used to generate the sample clock.  In fact, I'm pretty sure it *is* used by default.   The nearest integer divisor when requesting 171 kHz will be 468, producing an actual nominal sample rate of 170.9402... kHz.  (A divisor of 467 would produce a nominal sample rate of 171.3062...)     The quantization doesn't really scale linearly over wide ranges of target sample rate, but for rates in the vicinity of 171 kHz, quantization steps are a bit less than 0.4 kHz, so you can expect to hit your target to within about +/- 0.2 kHz.
    Next you need to consider clock accuracy.  The 6259 board is rated at 50 parts per million accuracy at nominal temperature of 25 C.  I don't know the temperature effect or whether you need to concern yourself with it in your app.  But 50 parts per million on a target of 171 kHz amounts to less than 0.01 kHz accuracy error.
    So it would appear that the 6259 would be a candidate.  There are likely other cheaper M-series boards that could also work.  The older E-series had only a 20 MHz timebase, which would lead to quantization error of about 1.5 kHz.  Don't recall their accuracy specs, but quantization already puts you over your error budget.
    -Kevin P.

  • G3 B & W Graphics cards - can I fit ADC/DVI?

    Ey up all,
    Have just been given a trusted but old G3 350 B&W by my boss (for free!!) so I thought it would make a nice machine to use as a basic Photoshop/scanning machine for the missus to do her artwork on.
    It's got 1gb of RAM and a newish 60GB Seagate 7200rpm HD so has all the bits I need. However, the graphics card is the original ATI 16mb with a VGA connector. Can I actually fit a newer card from a vendor like ATI that carries ADC or DVI, so I can use something like the classic 17" Apple LCD Studio Display (M7649)? There are loads of these displays floating about on ebay for a good price. If I can do this, it means I don't have to go for one of the matching blueberry CRT displays that take up a bit too much room on a desk.
    I know I could go for a third-party TFT from the likes of Dell or ACER but being a typical machead, I like to keep it Apple all the way!!
    Any suggestions are more than welcome and if you can put me on the right track price-wise, that'll be great.
    Pat

    Unless you really want an ADC-based Apple LCD Display, I'd go for an LCD display that uses a VGA or DVI port. There are plenty of them available today, and new ones are not extremely expensive. The ADC connection provides the video signal and power to the display. Using an adapter to connect the Apple display's ADC connector to a DVI port doesn't provide the necessary power for the display. The B&W G3 has a dedicated 66 MHz PCI slot for a graphics card, but doesn't have a power supply with a lot of output (by today's standards). If you were to install a newer Mac-compatible Radeon with a DVI port to use an ADC display, you'd need Apple's adapter, to power the display. If you want to use a widescreen display, be sure that the display card supports its optimal resolution at the 16:9 aspect ratio. The original Radeon Mac Edition and Radeon 7000 Mac Edition featured VGA and DVI ports, as well as 32 MBs of DDR memory. These cards can be purchased secondhand for little now, although the original Radeon Mac Edition is more scarce. There are newer Radeon cards for Macs, like the 9200, but PCI versions are not as abundant as their AGP counterparts.

  • I bought a 3rd ipad for my daughter in CA. I synced w/my PC to load some apps since she has no PC. Now I am in Iraq with PC and my iPad. If I buy my her iTunes gift cards, can she buy apps and music w/out using my pin and charging to my Credit card?

    I bought another iPad for my daugther.  Because she has no PC, I loaded her iPad with apps from My PC. Now she is in Oceanside CA.  And I am in Iraq with my iPad and PC.. My question is: How can my daughter load some apps of her own?  If I buy her iTunes gift cards, can she redeem them on her iPad with out using my Pin number (as that would give her access to my credit card)! I prefer to gifted her purchases, not allow her to purchase with access to my credit card. Can this be done?

    well if the ipad is on your itunes account then her apps and music etc will be billed to you. but if you give her gift cards you should take off your credit card because itunes won't tell you when you are all through with your gifted money and are back to useing your credit card until after you have made a purchase

Maybe you are looking for

  • Open Data Set Error while trying to read file from non SAP server

    Hi all, is it possible to read data from non-SAP application Sever? I'm using OPEN DATASET p_filin FOR INPUT IN LEGACY TEXT MODE CODE PAGE '1504', Where p_filin is other Windows server.Our applicition server is under Unix.Is it a problem? I make test

  • MATERIAL GROUP IN CRM SALES ORDER

    Hi I have download ECC 5.0 Material Group in CRM 5.0. I can see it in CRM in Product Master as category id, but it is not showing up in CRM Sales Order. Any help on this... Thanks Nitin

  • Can I link iWeb and Web Gallery so Web Gallery appears as part of iWeb?

    Anyone know how to link iWeb to Web Gallery so the latter appears to be part of the former? Apple seems to have set them up to be separate things.

  • Interface with portal and outlook

    All, Hello, I am to prepare a technical document regarding Interface between BW 3.5 and MS outlook and the portal. When there are errors when loading flat file (i.e. file does not exist, 0 size file) and when the reports do not run right, we will nee

  • MDG-F Data Replicate within same client

    Hi Let me explain my understanding about data replication. Data replication with SOA method is used only for replication of data into non sap system. Data replication with ALE/IDOC method is used only for replication of data into sap system. Please c