Nikon D80 NEF Driver

Hi,
My MacMini OS is 10.4.9. It is the Power PC version and not the Intel.
I have downloaded the Mac software for Nikon D80 NEF (Raw) and when I try to install the software I get an error message saying the software is for 10.4.8. Shouldn't it run on 10,4.9? Obviously it doesn't.
A while back and with help I was able to downoad the needed software for my MacBook Pro from somewhere on Apple. I can't find that source anymore. Anyone can shed some light on this one?
Thanks very much.
Farzad

Please disregard this question. It was nonsense.

Similar Messages

  • Opening Nikon D80 NEF files in Elements 5

    I cannot open NEF files from my Nikon D80 camera. Also, Nikon D80 camera isn't listed in the RAW files section for 4.1 new download. How will I be able to open files from the Nikon D80, if the 4.1 new download doesn't support this?

    Camera Raw is updated about four times each year. In most cases, the update is primarily to add compatibility for new cameras. Each new camera that takes raw images must have support added for it, not just the brand but the specific model. Support for your camera was added after the release of Photoshop Elements 5. Adobe does not create new installation disks every time Camera Raw is updated. It is your responsibility to download the updated Camera Raw when it becomes available and install it correctly on your computer.
    The message you are receiving is the message that is displayed when there isn't support for a specific camera. So you need to go to the download section and download ACR 4.1 and replace the version that you have installed right now. There is a link to the download at the very top of this forum. Be sure to follow the installation instructions precisely.

  • Nikon D80 NEF und Photoshop CS

    Hallo,
    ich habe meine D70 gegen eine D80 getauscht. Jetzt kann ich mit meinem Phoptoshop CS die RAW Bilder nicht öffnen. Mache ich etwas falsch?
    Gruß Heinz

    Photoshop updaten.

  • Can't open Nikon D80 nef (raw) files in Editor

    I installed the 3.7 plugin and I now am able to view my files in the organizer but as soon as I try to edit them I get an error message in editor (my copy is in french but loosely translated it says it does not recognize the file) I believe I followed the instructions for installing the plugin correctly, otherwise I wouldn't of been able to see my files in the organizer.
    Any suggestions?

    Sounds like you are using Elements? If so, you're more likely to get a response if you post in the Photoshop Elements forum:
    http://www.adobeforums.com/cgi-bin/webx/.eeb4f8b/

  • IMPORTING NEF (RAW) IMAGES INTO iPHOTO 6 FROM NIKON D80

    I have just got my self a Nikon D80 and find that I cannon import the NEF(RAW) images into iphoto6 - the files are not recognised - if I shoot in jpeg format it is fine
    Bit of a disappointment as I was really excited to see what the ophotos would come out like! I have not imported the software that came with the camera - but I didnt think that was necessary.
    Any help gratefully received

    David
    What kind of computer do you have? What version of the OS? What version of iPhoto? Have you applied the RAW updates from http://www.apple.com/support/downloads?
    Regards
    TD

  • IMac won't show Nikon D800 NEF image files.

    Nikon D800 NEF files will transfer from my Nikon D800 to my iMac. They will show as a "list" in the folder that I transfer them to.  They will not show as thumbnails, nor open with "image preview".  Tiff and JPEGs will transfer and show as thumbnails and open with all my processing programs.  The NEF's will also not open in Adobe Lightroom.  I need to be able to see the thumbnails on my iMac. Everything worked until I installed Snow Leopard.
    I have:
    Photoshop CS6 13.0  64 bit
    Camera Raw 7.1.0.354
    Snow Leopard OSX 10.6.8
    Nikon View NX2 2.3.0
    Nikon Transfer 2  Vers.  2.3.1
    Adobe Bridge 5.0.0.399
    Computer  info:  iMac Intel Core 2 Duo, 86 Gb on Hard Drive, 3 GB Ram.  Camera connected directly to computer with supplied USB cable.

    http://support.apple.com/kb/HT5955
    Download the latest version of Digital Camera Raw
    This foe version 5.01 which supports your camera, there is a later version out if you wish to do a search.
    http://support.apple.com/kb/dl1706

  • Raw Images (Nikon D700 NEFs) suddenly turn unsupported

    Hi there,
    for some of my managed Nikon D700 NEFs I start geeting an 'unsupported image format' error. I worked with those files a couple of months ago and everything was fine, no errors. So, the problem must have came up recently. The files wont show up in Preview neither but open fine in Capture NX2 which brings me to the assumption, that it is an OS X raw compatability issue.
    I browsed through the related discussions but couldn't find a way that resolved the problem. What puzzles me is the fact, that obviously only few people are experiencing similar issues. I'm afraid, that something might be "broken" in my system installation. To double check this I would like to provide one of my unrecognized NEF files:
    https://www.dropbox.com/s/1sx5bsr794xvbmj/_DSC7035.NEF
    If this file works for you, it's not an Aperture issue, but a single problem on my (few) machine(s). The answer to this would be of great help in finding the right fix. Any feedback is highly appreciated! Thanks!
    Frank
    iMac 24", 2.4 GHz Intel Core 2 Duo, 4 GB
    OS X 10.8.2 (12C60)
    Aperture 3.4.3
    Raw 4.01

    Thanks Leonie, Thanks Jerry.
    Leonie,
    I flipped through my library. It seems that the problem started first with pics, I imported March 2011. Prior imports look fine. (Interestingly it started right after an air trip. But if the security scans somehow damaged my cards and subsequently the pics, why would you be able to open them...? )
    I can't find anything which could be special about the relevant files: In fact I sometimes shot a series of pics of the same subject in a row. Some work, some are unsupported. The filenames I didn't change (standard out of camera format "_DSC####.NEF", file system is Mac OS X Extended (Journaled) btw.).
    I tried all of the 3 troubleshooting steps of Aperture several times. I tried repairing permissions for the whole drive. I also tried importing directly from camera besides using a card reader, both, into existing and new libraries. Importing pics from iPhone and an old Lumix is ok (but these are not raw...).
    I will try a different user account and report back.
    Many thanks again to all for your help.
    Frank

  • HELP!  iMac won't show my Nikon D800 NEF files.

    Nikon D800 NEF files will transfer from my Nikon D800 to my iMac, but they will show only as a "list" in the folder that I transfer them to.  They will not show as thumbnails, nor open with "image preview".  Tiff and JPEGs will transfer and show as thumbnails and open with all my processing programs.  But I need to be able to see the NEF thumbnails on my iMac. The NEF's will also not open in Adobe Lightroom.   Image files will open with Camera Raw and Photoshop CS6 even though they don't show as thumbnails.  Everything worked until I installed Snow Leopard.
    I have:
    Photoshop CS6 13.0  64 bit
    Camera Raw 7.1.0.354
    Snow Leopard OSX 10.6.8
    Nikon Transfer 2  Vers.  2.3.1
    Adobe Bridge 5.0.0.399
    Computer  info:  iMac Intel Core 2 Duo, 86 Gb on Hard Drive, 3 GB Ram.  Camera connected directly to computer with supplied USB cable.
    Desperate for any help. Thanks

    The same comments I gave for the D750 apply to the D5100 because both cameras are newer than what the maximum ACR 4.x version you can update PS CS3 to.
    https://forums.adobe.com/message/7054815#7054815
    Here is the list of supported cameras and their minimum ACR (and Lightroom) version:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Here is the list of Adobe programs and their range of supported ACR versions:
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • Nikon RAW NEF files have white balance blown out (iPhoto 7.1.4)

    I had no problems opening my Nikon D200 RAW NEF files in iPhoto until about a month ago. I think I downloaded a patch for compatibility of camera files? After that when ever I open A raw file, the colors and white balance are blown out.

    I was unable to get my images to appear as I shot them. I shoot with a Nikon D80 and shoot with a Vivid setting. Now after shooting a wedding of more than 1500 images I have to find a way to color correct them all. I have attempted the downgrade to the previous version, unsuccessful. I have forwarded on my comments to apple and find that this issue effects tens of thousands of photos. As a MFA student at a major university, and studying color management and workflow, I feel I need to look elsewhere for file management as iPhoto is not able to do the job and the fact that it affects my entire library system of photos... simply unacceptable. I have always found the discussion groups extremely helpful, but this issue has effected so many of us and is such a huge integral part of the photographic process that I need to look to other programs to effectively handle my color management.
    Disappointing.
    Daryn

  • Problem importing RAW images from my Nikon D80

    Hi.
    I'm having some problems importing images from my Nikon D80 when I've been taking photos in RAW format. IPhoto recognises the camera as usual, and allows me to name and describe the roll. However, it then seems to freeze and won't import the photos.
    IF I stop the import, then open the camera as a disk, I can physically grab the .NEF files from their folder and drop them into iPhoto where the import will carry on as expected.
    Any ideas?

    See my reply to your other post.
    Regards
    TD

  • Nikon D2Xs NEF not working with Aperture

    This is so shocking. I should have researched more..... but I cannot believe that Nikon and Apple do not have it together on Aperture??
    I just switched from the Canon 1DS, which worked like a charm with Aperture, to the Nikon D2Xs and Apertrue will not support NEF files from the camera. Frankly. I am pretty stunned. What's the deal? I find a lot of chatter in the forums about other Nikon model NEFs that are not working.
    Since there are only 2 serious top of the line pro-digital SLR manufacturers out there, I would have thought that they would both be supported fully.
    Nikon Tech support said that their plug-in developer kit has been available for a long time, it is up to Apple to take advantage of it.
    Am I out of line here - ranting on..
    Does anyone know of a solution to this issue, other than dumping Aperture and moving to Nikon's Capture NX (when they get to finally release it) and Photoshop?
    Many thanks for you help in advance,
    NIck

    So you switched from Canon to Nikon. I decided to do
    the switch vice versa. What were your reasons to pick
    Nikon?
    The EOS and the D2x are both very excellent cameras. Some things I find better with the D2x:
    Image quality.
    First off, as far as I know prints from Canon's best and Nikon's best are similarly excellent. In spite of the EOS's ~50% higher cost and additional pixels it does not provide significantly better prints. Nikon worked some pretty good engineering to achieve that.
    Price.
    Most photography involves price tradeoffs with faster/better lenses, etc. costing more. In the case of the D2x the arguably equal and in some ways better camera actually costs $thousands less.
    Speed.
    The D2x shoots RAW at 5 to 8 fps versus the EOS 4 fps. When you are trying to capture the "perfect" instant of a rapidly changing scene higher frame rates increase the likelihood of catching the perfect moment. Or if you are auto-bracketing, faster speed captures your bracketed images before the scene changes. The concept of shooting a burst of 5-20 frames just to catch the very best pic is new to most photogs, because with film it was impractical. With cameras like these DSLRs new photo workflows may evolve. [Edit: My workflow has evolved. I now shoot almost all dynamic shots and many group shots as a burst of 2-5 pix at 2-5 fps.]
    8 fps Crop Mode.
    The D2x will shoot 6 megapixel images taken from the center of the frame at 8 fps. So if one wants to shoot tele action shots like sports it is ideal.
    Buffer capacity.
    IMO a much bigger issue than fast frame rate is the buffer capacity at that fast frame rate. The D2x captures about twice as many pix (~22) as the EOS does before the buffer fills.
    Card capacity.
    Canon built a slower camera with 30% more pixels and that leads to less images per card, slower file transfers, etc.
    LCD size.
    The D2x LCD is more than 50% larger than the EOS. The larger LCD changes everything as far as the ergonomics of DSLR workflow are concerned. Just try a D2x side-by-side against the much smaller EOS LCD.
    Exposure Compensation (used constantly in DSLR workflows).
    +/- 5 EV for the Nikon versus +/- 3 EV for the Canon.
    Weight.
    Being a 200# male with large hands I don't worry about size and weight too much. The Canon does weigh almost a pound more. Dimensions are pretty similar, with the Nikon a few mm larger. If size/weight are issues the Nikon D70s and Canon 20D are much smaller but sacrifice pro features like good viewfinders.
    Self-timer.
    Nikon has choice of 2/5/10/20 seconds whereas Canon is only 2 or 20 seconds. I find 2 seconds is sometimes not enough to let the camera settle down on the tripod if it is extended, so typically I use 5 seconds. Using 20 seconds as a cable shutter release substitute would drive me crazy. Often this is moot because I almost always have a cable shutter release with me.
    Framing.
    Some folks prefer a DSLR to be the same lens factor as 35mm film. Other folks do not. Quality superwide lenses are achieved at a $500-$1500 cost while supertelephoto is a $5000-$15000 cost; personally I prefer the 1.5 factor since it extends the expensive telephoto range. However, 1:1 versus 1:1.5 is a matter of personal preference rather than one being "better" unless print quality were to suffer.
    The high end EOS does beat the Nikon D2x hands down in lower noise at ISOs of 800 and above. I am not familar with the high ISO performance of the D2xs, however.
    -Allen Wicks

  • Hi I'm getting Lightoom error when trying to edit in Nik Software "Lightroom was unable to prepare the selected file at    /Volumes/Portable C/Kite Skating nikon/_DHT9654.NEF for editing.  It will not be opened.

    Lightroom was unable to prepare the selected file at
    /Volumes/Portable C/Kite Skating nikon/_DHT9654.NEF for editing.
    It will not be opened.
    what does this mean? can anyone help?

    Yes it is on a portable drive yet I have already worked with it and exported it as a jpg. The problem arises whenever I try to edit in the plug-ins from Nik software...this just happened recently as it never happened before...for years?

  • Nikon d80 raw and elements 6

    Hi all
    When looking through the specs for the RAW 4-4-1 update, it lists the Nikon D60 as supported but no mention of the D80.
    My main goal at the moment is to edit RAW (NEF) pictures and I want to find out what I need for that.
    There are various questions spread over the forums from people who can not get elements 6 to work with RAW images.
    Bottom line: does elements 6 fully support Nikon D80 image editing or not?
    Thanks for your help.
    Ben

    All ACR releases contain support for ALL cameras supported in ALL previous versions.
    YES, the D80 is supported.

  • Where to find color profile for Nikon D80? Then how do I apply it?

    I've tried googling and found a few places that claim to have ICC profiles for my Nikon D80. I've seen people say, "oh use program X or Y to apply it" but I want to do everything in Photoshop (CS6, on my Mac running Yosemite). Can someone point me at a place to find an ICC profile so I can get my Nikon NEF raw images into CS6?
    Can you further tell me how to install the profile? I've tried all three locations described at Introduction to Icc Profiles and I've rebooted many times. No luck! The ICC files I've got look find but maybe they aren't?

    Lightroom doesn’t use ICC profiles, it uses .dcp files, DNG Color Profiles.  The profiles come with Photoshop and updates to the Adobe Camera Raw (ACR) plug-in.
    If you really mean the D80, then that has been supported since PS-CS2/ACR 3.4.
    If D80 is a typo and you meant D800, then that has been supported since PS-CS5/ACR6.7.
    If D80 is a typo and you meant D810, then that has been supported since PS-CS6-or-CC/ACR 8.6.
    Do About Plug-ins / Camera Raw and see what precise version you have, and verify which camera model you have.

  • Unable to read my Nikon D80 formatted SD (Sandisk 2GB extreme 3) on any Windows 8 host (windows 7 works ok)

    Hi,
    I have found that my SDcard formatted in a Nikon D80 DSLR is unable to be read in any version of windows 8, I have tried different versions (including RT), different machines (including brand new Dell XPS laptop), USB converter...nothing works. I have also
    tried multiple cards of the same type.
    The device shows up in diskmgmt, but the partition does not have a drive letter assigned, nor can I assign one manually. Any action on the disk/volume/partition in diskmgmt results in the following error: "The system cannot find the file specified".
    This is the same error for any version of Windows 8.
    Any ideas?
    Thanks,
    Matthew

    Give try to professional photography forum here
    http://www.dpreview.com/forums?utm_campaign=internal-link&utm_source=mainmenu&utm_medium=text&ref=mainmenu
    HTH
    Milos

Maybe you are looking for

  • Urgent ---group by syntax error

    This is my syntax as below.But it doesn't work.Does anyone can tell me what's problem ? or it have another way to solve this quuestion? thanks . sql syntax: select a.txdate,a.costype,sum(cosamt) * (1+a.cosrate) as costamount from sales_cost a where a

  • Intersection validation report currency

    Does anyone know how to /where to change the currency symbol that appears on the intersection validatuion report? Currently showing the pound symbol. I want to change it to show no symbol?

  • Tomcat behaving Strangely

    Hi guys, I have a sample Spring app installed on my TOMCAT...but i dont know, Tomcat just keep reloading the context again and again.. And after few minutes, it consumes so much memory that my pc starts hanging... I am using Tomcat within Eclipse, an

  • Why is Firefox not loading my pages at startup anymore?

    FF 12.0. Why now all of a sudden is FF not loading my pages at startup. It loads the "pinned" pages, but NONE of the other ones I had open. This is happening at every FF startup now. Really, this was the ONLY feature that was keeping me with FF. The

  • Some Flash Sites are not displayed with Flash Player 9

    Hello everyone, After having upgraded to Flash Player 9 I cannot view some flash sites on either FF or IE. I have checked around with other users also and they cannot see them either. Although the page seems to be loading with title etc. it remains b