"no access to the digital certificate" - Trying to export my first iOS app from Flash - Help please

Hello
I'm trying to export my first iOS app from flash to my desktop / on the device (Flash Pro CC, Iphone5)
I followed the instructions on the adobe website to build an air app for iOS but on the last step it
doesn't export the app.
What I've done so far:
- Apple developer account
- creating the certificate + convert it to .p12
- app ID / Name etc.
- creating the provisioning profile from apple
- iOS Air app in flash (Only Text "Hello world" with a tween)
Now i have to load the certificates into Flash & enter a password (is it the password that
i entered in the certificate or from my developer account/ Apple ID password? Both didn't work at the end)
When i klick on publish in the last step than it loads a while but then i get the Error:
"no access to the digital certificate"
What is wrong? Can you help me please.

Also, I should say, when I go into my phone on the computer and try to install an app, I get this message:
Unable to start operation. Installer is already in use.
Any ideas

Similar Messages

  • The PDF files that I export to an iOS app won't read in VoiceOver

    Export works fine from InDesign for a 10 page file and the file displays on the iPad. Interface for the app reads in VoiceOver but it will not read the text of the PDF. Bookmarks were enabled in the settings in the DPS. At the moment it does not look like a robust feature of the application and the lack of control over the PDF driver settings is frustrating.
    Any ideas on how to get them working?

    Thanks Neil. Do you know if there is a timeline on when it will be supported? We need to make a decision on how we will provide the digital files as we are required under our Disability Discrimination Act in Australia to provide accessible content.

  • In need of some advice - Trying to publish my first iOS app

    Hi there!
    I've been looking just about everywhere for this error, and it does seem like a lot of people have encountered the same problem. However, i cannot find the answer anywhere.
    When i click "publish", I'm getting this error message: " iOS publishing requires files which are not installed. Please quit Flash Professional and run the original installer to ensure that all optional components are installed"
    Now, after my 5th reinstall I cannot figure out which files these would be. From what i know, I've selected all the optional files that i can see during installation.
    So if anyone out there knows how to solve this, your reply would be more than greatly appreciated!
    - TJ

    Hi there!
    I've been looking just about everywhere for this error, and it does seem like a lot of people have encountered the same problem. However, i cannot find the answer anywhere.
    When i click "publish", I'm getting this error message: " iOS publishing requires files which are not installed. Please quit Flash Professional and run the original installer to ensure that all optional components are installed"
    Now, after my 5th reinstall I cannot figure out which files these would be. From what i know, I've selected all the optional files that i can see during installation.
    So if anyone out there knows how to solve this, your reply would be more than greatly appreciated!
    - TJ

  • Could not access the digital certificate. could not load keystore file (password may be incorrect)

    I am trying to create my IPA, I have gone through all the steps to create my certificates etc from Apple but keep getting the above error message when I try to publish my file.  (I am using the Flash CS5 iphone packager, not the command line)  Mac OSX
    Here is the tutorial I am following: http://help.adobe.com/en_US/as3/iphone/WS789ea67d3e73a8b2-240138de1243a7725e7-7ffc.html
    What are some things to try to troubleshoot?
    Thanks!

    Hi All!
    I’ve just finished an application but I’m having problems generating the .BAR file that I want to submit to the AppWorld. These are the commands I’m executing
    First - "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-keytool" -genkeypair -keystore bbDevCertificate.p12  -storepass myPass -dname "cn=Company" -alias " Company "
    Second  - "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-airpackager" -package AppName_signed.bar AppName-app.xml blackberry-tablet.xml AppName.swf splash.png icons/icon128.png
    Finally  - "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4\sdks\blackberry-tablet-sdk-0.9.3\bin\blackberry-signer" -verbose -cskpass myCSKPass -keystore bbDevCertificate.p12  -storepass myPass AppName_signed.bar RDK
    My blackberry-tablet.xml is:
    <qnx>
        <initialWindow>
            <systemChrome>none</systemChrome>
            <transparent>false</transparent>
        </initialWindow>
        <publisher>Company</publisher>
        <category>core.games</category>
        <icon>
            <image>icons/icon128.png</image>
        </icon>
        <splashscreen>splash.png</splashscreen>
    </qnx>
    The problem comes at the first step. I'm using Flash Professional CS5. When I generate the p12 certificate and I try to export my app using that certificate and the password that I've set, it gaves me the next error:
    "Error creating files.
    Could not access the digital certificate. unable to retrieve key (password may be incorrect)"

  • I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.

  • Having trouble with the syntax when trying to only print some random pages from a multi page documen

    Having trouble with the syntax when trying to only print some random pages from a multi page document.  So far in the Print Selection Area, I have chosen "pages" and then typed 1,3-4 so as NOT to print page 2 but this does not seem to work. - Help Please

    In my updated firefox, the print button does NOT open print preview first.
    How can I access print preview function?

  • Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again.  Tried to complete a repair, rebooting nothing works. Help please.

    Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again.  Tried to complete a repair, rebooting nothing works. Help please.

    Hi,
    Can you pls. provide more details of the issue?
    OS/Platform
    It would be great if you can provide the MSI logs for repair from the %temp% directory.
    Thanks,

  • I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

    I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

    Hello sweetracy,
    The following article can help restore and stabilize your cellular data connection.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Cheers,
    Allen

  • How do i get all my data and info from my old iphone onto my new one without access to the original itunes that i set my first iphone up on? my partners itunes keeps telling me that its going to replace all my apps and data with his stuff

    how do i get all my data and info from my old iphone onto my new one without access to the original itunes that i set my first iphone up on? my partners itunes keeps telling me that its going to replace all my apps and data with his stuff

    ok so i have my own i tunes library - how do i get all my old apps onto my new library?

  • I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands

    I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
    initialy All I was trying to do was downgrade 10.7 to 10.6 .

    You have to consider the possibility the hard drive may be dying.    If your data isn't backed up, try one of the tools below:
    https://discussions.apple.com/docs/DOC-1689
    Once you are sure your data is backed up, we can examine other possibilities.  In the meantime call AppleCare for your original installation DVDs.  You may need them.

  • For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try ag

    For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try again or enter an alternate path to a folder containing the installation package iTunes.ms in the box below.
    Please help!
    Many thanks in advance
    Ben Bentley
    West Midlands
    UK

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Apple shop changed my iphone 3gs today, got home and cannot join my wifi. both my mac and ipad is working on wifi. tried rebooting, resetting still doesnt hold the wifi, it's there for a sec then its not connected.help please?

    Hi,
    Apple shop exchanged my iphone 3gs today. got home but it doesnt pick up the wifi. first the correct supplier appears then it says not connected.
    both my mac and ipad is working on wifi (so did the previous phone) i ve tried rebooting, tried reset supplier...nothing works. can someone help please?
    thanks

    Yes, they should be able to verify that WiFi is working properly. If I just got a new phone & it didn't work perfectly, right out of the box, before I started restoring or whatever, I'd be right back where I got the phone.

  • I'm trying to sync my iphone in IPhoto. I get this message "our MobileMe account information is not correct. The provided login or password is not valid." when I click on the "Open MobileMe Preferences" button, it doesn't take me there.  Help please.

    I'm trying to sync my iphone in IPhoto. I get this message "your MobileMe account information is not correct". "The provided login or password is not valid." when I click on the "Open MobileMe Preferences" button, it doesn't take me there.  Help please.

    Mobile me has been discontinued for over a year.  What system  and iPhoto versions are you running?
    How are you trying to sync?  With Photo Stream or thru iTunes?
    Do you have an iCloud preference pane in your System preferences?
    Do you meet the minimum requirements for iCloud and Photo Stream?
    iCloud: System requirements
    iCloud: Photo Stream FAQ
    OT

  • HT201401 I am using iphone 3s after updating my phone it is not reading the sim i tried with different sim's but none worked can you please help me

    I am using iphone 3s after updating my phone it is not reading the sim i tried with different sim's but none worked can you please help me

    There is no iPhone 3s.
    What is displaying on the device?
    Has the device ever been hacked or jailbroken?

  • HT3775 This info is not helping. I am using VC500MAC digital video conversion system to record old VHS tapes to computer. The file is .mov, but quicktime is not playing it back. Help, please.

    This info is not helping. I am using VC500MAC digital video conversion system to record old VHS tapes to computer. The file is .mov, but quicktime is not playing it back. Help, please.

    Sorry for this question. Can you use this device with Vlc or QuickTime? Does skype support it? Is this device supported only by its own software?
    I need a device that can work with my own software. My software can work only with a QuickTime supported device.
    Thanks if you will reply to me.

Maybe you are looking for

  • Encoder error when exporting my video from after effects

    hi, when i'm exporting my animated video using encoder i get this error...help please? - Source File: C:\Users\Temp\AppData\Local\Temp\grunge_photos_final_collected (converted)_AME\tmpAEtoAMEProject-grunge_frames_HD1.aep - Output File: C:\Users\Temp\

  • Invalid Password when trying to connect wirelessly

    Hey all, For some reason my wife's laptop has decided to not recognize my wireless password. I have tried changing the router's security from WEP to WPA and back. Different passes, everything. Network Setup Assistant sees the network but gives "The p

  • Parallel Process in Coldfusion

    Hi All, I came across with problem of the time we spent to process 10.000 employees, that took so long, more than 2 hours. I made an Coldfusion application to process Payroll data and calculate the taxes. the Idea to improve the performance is by mak

  • I've been a long time with my I pod close...now I can't use or charge it!

    Many months ago, I've lost my apple shuffle charger. Recently, my brother command me a new one from China. I didn't use I tunes for a long time and I uninstalled it. Now that I can recharge my I pod shuffle, I plugged it to my computer but the status

  • Regarding radio button and selection screen

    hi i have a requirement to grey out one particular select option , if any one of 4 radio button is selected. (total 5 radio buttons ) .  how do i proceed . SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME. SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAM