No accounts showed up after running reconcillatio with SAP HR adapter

Good afternoon all,
I have an urgent question with the SAP HR adapter and I cannot resolve it for three days. You help will be greatly appreciated.
I configured SAP JCO 2.1.9 to work with IDM 8.1 SAP HR adapter. The "Test Configuration" button works on the first page of SAP HR Resource Wizard. After I ran a full reconcillation, IDM gave a status "Full reconcillation succeeded" with the following details:
Users examined for claims 0
Resource accounts claimed: 0
Resource accounts discovered: 8578
Native changes detected:
Accounts added: 8578
Accounts processed for reconcillation: 8578
Correlation processing:
Resource accounts fetched: 8578
Accounts correlated with users: 8578
Account state updates required: 8578
To see the account index for the accounts in each category, click a situation type below:
While the account index search returns nothing and listing accounts shows no accounts from SAP.
Would you please shed some lights on what might be wrong with my configuration? Thank you very much for your help.
Sheng

Did you find any solution? I´m facing a similar problem: when I run the reconciliation in a few secons it ends and shows 0 for all kind of results (claims, discovered, fetched,...). In another instance it works fine so we configured this SAP resource in a similar way but doesn´t detect accounts.
Regards.

Similar Messages

Problem after run report with spreadsheet

hi evry one
ther an a problem after run report with spreadsheet .
after runing iexplorar open and close fast no thing else
when i check the job from appserver job success with spreadsheet dis format.
what shall i do.
thanks.

Hello,
Do you use the Oracle Forms builtin WEB.SHOW_DOCUMENT ?
If yes , take a look to : "IE7 windows opened and closed immediatly"
http://www.experts-exchange.com/Software/Internet_Email/Web_Browsers/Internet_Explorer/Q_23304982.html
You can test the solution suggested :
We have found the setting that we needed, under the Internet Options
Security tab, if you select the internet zone, and click the custom level
button, then scroll down to the Downloads section, the first option is
Automatic prompting for file downloads, setting this to enable keeps IE 7
from interfering with this sort of download.
Regards
Example with screen shots :
http://www.celt.iastate.edu/webct/securitysettings.html
Regards

Labview hangs on exit after running VI with ActiveX

I have a vi with an ActiveX container which generates many events (30-50/sec). The events are serviced in queued mode. Among other things the ActiveX object polls internally for snapshot data from DSC Tags (rarely - only once per minute).
After the vi terminates there are two types of errors:
1. Labview can't close even though it is asked to from its main UI - it still resides as a process and is present in the task bar but there is no UI to it - something must be preventing it from closing.
2. After restarting, the VI hangs on the first call to the ActiveX object (create event queue)
Does anyone have an idea what can be happening? Can a large number of ActiveX events cause a problem resulting in Labview ins
tability? Are there any tools to find out what is causing it?
Thanks

One possibility is that it there is a very large number of unprocessed events in the queue when you stop the application, and it takes LV time to deallocate all the memory. I had this happen one due to control references that weren't geting closed. After running over night it could literally take LV over an hour to deallocate all the thousands of unclosed references left in memory.
Might be the same sort of thing going on. Watch LV's memory allocation in the Task Manager when you attempt to shut down and see if it is very large and then starts going down very slowly...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

XA Trasaction issue with SAP JCA Adapter

Using OSB 10gR3
We have a proxy picking messages from a JMX queue using an XA enabled connection factory (the default weblogic XA connection factory). Proxy service calls a business service which is based on the SAP JCA WSDL and posts an IDOC to SAP system. A Route to node with Routing option Quality of service set as Exactly Once is used to ensure a rollback in case of errors on SAP processing. (Also tried with a service callout in request pipeline to achieve the same result).
Here are the issues we are facing
1. If the the SAP Outbound connection on iwafjca resource adapter is set as Local Transaction
When testing from console the service runs fine. When message is sent from JMS queue we get an error "Transaction already exists". This seems correct as SAP Adapter will try to create a new transaction which will be possible while running from console while when Global transaction is created by JMS queue (when Proxy picked up message from XA enabled queue) SAP Adapter will not be able to create a separate transaction being not a part of XA.
2. If SAP Outbound connection on iwafjca resource adapter is set as XA Transaction
Even the business service when tested directly from console fails in this scenario. The error we get is "XA transaction not supported by JCA adapter".
Any idea how to make the SAP JCA Adapter call a part of global transaction so that failed messages can roll back to the JMS queue?
Sorry for the long description but I thought it will make it easier :)

2. If SAP Outbound connection on iwafjca resource adapter is set as XA Transaction
Even the business service when tested directly from console fails in this scenario. The error we get is "XA transaction not supported by JCA adapter".
Any idea how to make the SAP JCA Adapter call a part of global transaction so that failed messages can roll back to the JMS queue?The interface provided by SAP (SAP JCO) doesn't support JTA transactions.So there is no way adapter/Connection factory can enlist in global transaction.
1. If the the SAP Outbound connection on iwafjca resource adapter is set as Local Transaction
When testing from console the service runs fine. When message is sent from JMS queue we get an error "Transaction already exists". This seems correct as >SAP Adapter will try to create a new transaction which will be possible while running from console while when Global transaction is created by JMS queue >(when Proxy picked up message from XA enabled queue) SAP Adapter will not be able to create a separate transaction being not a part of XA. This is known behavior and If I remember correct there is Bug raised but closed as Work as Designed (I still don't have clear explanation why adapter starts local transaction when underlying connection doesn't even participate ). Solution for this is to Make QOS=Best Effort.This makes sure that the local transaction required by adapter will not conflict with global transaction.
So if you expecting adapter to participate in global JTA currently it is not supported.
Thanks
Manoj

Account showing negative after mvt 309

Hi,
we have created
new material A valuation class 3317 material type ROH
G/L 233001
old material B valuation class 3314 material type ROH
G/L 233033
transfer material B to A mvt type 309
after doing all this when we go to tcode F.01 i.e balance sheet
we come to know that
account 233033 ie for old material B showing negative
i check the amount in G/L 233033 come to know that it go negative only after stock transfer mvt 309
can anyone suggest what cause this, and how to correct it.
thanks in advance
shakir

Hi,
Material B(old material)
In accounting 1:
Valuation class -3017(G/L 233030)
price control-V
moving price-102.01
standard price-109.87
total stock -0(as total stock is transfer to material A)
total value-0(as total stock is transfer to material A)
previous price-100.54
Material A(new material)
In accounting 1:
Valuation class -3013(G/L 233001)
price control-V
moving price-96.49
standard price-99.46
total stock -174,846.524
total value-16,871,458.43
previous price-99.46
this are the value in material master
please give ur suggestion as i can find any......
I check the accounting document generated while transfer posting mvt 309
Itm PK Account Account short text    Assignment Amount
1    99 233030 IMP MATERIAL         20080108 14,621,116.03-
2    89 233001   R/MSTKPADS         20080108 14,621,116.03
thanks
shakir

Message shows that after running a standalone program

I met a strange problem when start running the program, which is a created installer for 8.5.
The window shows
even I am not using webserver. How to get ride of this issue?
Thanks,
Ott
Solved!
Go to Solution.

In LabVIEW all settings from Tools->Options are saved at ...\Program Files\National Instruments\LabVIEW 8.5\LabVIEW.ini
if you create an executable <your app>.exe this .exe has its own ini - file, located at the same direcory as the executable. The name of that ini - file is <your app>.ini. In <your app>.ini you can make the same settings than in LabVIEW.ini.
So if you are talking about an executable: changes in LabVIEW.ini via the Tools->Options dialog does not effect <your app>.ini
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Problems with upgrading to imovie4 after running fine with imovie3

I have a friend who works with imovie 3. She has a iMac flat screen 800mhz with 512mb ram. She has made about nine movies using imovie3 and everything was working fine. She then tried to upgrade to iMovie4 (I know dont fix it if aint broke) and now her movies are all choppy, if you try to run the whole movie. It is fine however if you run a couple three frames at a time. It is almost like it gets overwelmed and starts and stops. We tried going back to imovie3 with no success (this was after a format/ reinstall of her osx 10.3).
I tried these movies on my machine (mac mini 1.5ghz with 512mb ram) using imovie 4 and they seem to run almost flawlessly). Can someone please shed some light on this as I am clueless on how to move forward.
Thanks ahead for your much needed help.
Mini Mac 1.5ghz PowerPC G4 Mac OS X (10.4.7)

Turn off FileVault:
http://docs.info.apple.com/article.html?artnum=93460
If that didn't help, try everything here:
http://danslagle.dvmix.com/mac/OSX/panther.shtml
and here:
http://danslagle.dvmix.com/mac/iMovie/iMovie3FixesIssues.shtml
http://danslagle.dvmix.com/mac/iMovie/iMovie4FixesIssues.shtml
http://danslagle.dvmix.com/mac/iMovie/iMovie5FixesIssues.shtml

Flash on site, after running, replace with clickable image

Hi, so i dropped a flash movie i made into a website i am
doing. it runs (still needs work cause the sound is now running at
a different pace than the movie! and i gotta turn off the looping)
but when it's done, it goes to blank. I need it to do this:
onload: run movie once only, then replace flash movie (in
same place) with clickable image to go to another page on the site.
can anyone guide me a bit? here is the page
http://www.kirkmanlabs.com/chrisindex2.htm
thanks in advance.
Holly

On the last frame of your movie place the required still
image (converted to a movie clip with an instance name) , together
with a stop(); action to prevent the moving looping. On the same
timeline frame add the actionscript to respond to a click on the
image movie clip, something like:
this.instanceName.onRelease = function(){
getURL("newPage.html", "_blank");
}

I have submitted build by xcode 6.1 but in itunes account shows us Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK after clicking the submit for review.

I have submitted build by xcode 6.1 but in itunes account shows us Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK after clicking the submit for review.
Please tell me the solution as soon as possible and i am able to remove the build.

You have used Xcode 6.1 and it is a valid version, so you should not have any problem. Anyway, if there is any problem, Apple will contact with you to fix it before your app is published.

I have a MacBook that had Mcafee on it and went to great lengths to get it off. Unfortunately after running all the remove scripts and support from mcafee, in my console it still shows com.apple.launchd{1} with message (com.mcafee.virusscan.VshieldEPoint

I have a MacBook that had Mcafee on it and went to great lengths to get it off. Unfortunately after running all the remove scripts and support from mcafee, in my console it still shows com.apple.launchd{1} with message (com.mcafee.virusscan.VshieldEPointInterface[7881]) Exeted with exit code:1 Then the next line says will start in 10 seconds and it repeats endlessly.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

GR amount/line item still showing in Open Item after run F.13

Dear Exparts,
We run the F.13 after MIGO and MIRO. The GR/IR line item should clear after run the F.13. But the scenario is that in FBL3N in GRIR G/L Balance, MIRO Line item showing clear but the GRN line item is still showing in Open item. How can it possible and what to do for it. As per my knowledge Both line item should clear after run f.13.
And how can I get the credit amount in which respect the IR(MIRO) amount cleared.
Thanks,
Sourav

Hello Sourav,
In the Automatic clearing Program for the items to get cleared they
should meet the fixed criterian and the user defined criteria (OB74).
When we execute SAP124(F.13) with the flag "only documents which can
be cleared" it will display in detailed list only those documents that
can be cleared. If dont check this field it will generate a list even
of documents that cannot be cleared.
For example:
in the OB74: ASSIGNMENT,FUND & BUSINESS AREA as the criteria.
And the ASSIGNMENT is not matching and thus the system does not find
the item suitable or rather eligible for clearing.
The system groups items according to
fixed system criteria:
Company code
Account type
Account number
Reconciliation account number
Currency key
BSID-WAERS for customers
BSIK-WAERS for vendors
BSIS-PSWSL for G/L accounts
Special G/L indicator
The program also groups items according to a maximum of five user
criteria. Note that the trading partner number and the business area are
no longer fixed system criteria (in comparison to the former clearing
programs SAPF123 and SAPF123W). Therefore, if you want to group by
business area or trading partner number, you have to enter these as user
criteria.
Thus initially items are grouped according to fixed criteria one of
which is company code.
I would like you to review note 10757 FAQ: MR11, clear GR/IR clearing
account
Please also review the documentation of the program SAPF124
Please also review the help.sap.com documentation on GR/IR Account
Maintenance.
http://help.sap.com/saphelp_47x200/helpdata/en/30/1060387db94003e1000000
9b38f8cf/frameset.htm
hope this helps
regards
Ray
Edited by: Raymond Moynihan on Oct 19, 2011 5:14 PM

HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

No contacts show up after setting up CardDav with gmail- any idea how to fix?

No contacts are showing up after setting up CardDav with gmail. Any idea why?
Here is how i setup CardDav (with no success)
1. I removed my old gmail account that was setup with the Exchange protocol, checked that my Exchange-Gmail contacts were no longer showing in my Contacts app, then rebooted my iPad.
2. I setup my gmail contacts with the CardDAV protocal as per google's instructions (which match everyone's instructions when I googed to troubleshoot). Google's instructions can be found here: http://support.google.com/mail/bin/answer.py?hl=en&answer=2753077 .
3. No contacts showed up in my contacts app. I have verified all of Google's troubleshooting tips such as ensuring SSL in enabled, etc. There were no problems or error messages when verifying my username and password. I also checked to make sure my contacts were in Google's "My Contacts" group, which they were.
After pulling my hair out a little, removing the account and going through the steps over and over for an hour, I have given up and gone back to syncing my contacts with the Exchange protocol as per: http://support.google.com/a/users/bin/answer.py?hl=en&answer=138740 . My contacts show up instantly with this method.
I would like to get cardDAV working, since Google is phasing out Exchange ActiveSync, and CardDAV seams to support more fields etc (although it is not Push sadly).
Any ideas? Thanks for your reply if you can think of anything.

Hey there AppJunkie ...
I'm having this issue too. The odd thing about it is that when using my iOS devices, all of the contacts (and other address books) all show up exactly as I expect and want them to. Now, on Mac OS X, that's a different story. There doesn't seem to be the same functionality between the two Apple operating systems.
Quite frustrating, as I have clients who expect these to work with no problem on their Mac desktops, since their mobile devices work perfectly. They let me know their mobile devices work, and they want the problem fixed. I have nothing I can say or even suggest. It is very discouraging.
I have not been able to find any fix or workaround for this, unfortunately.
~Laz

Desk top pc windows 7 ultimate, after update of itunes can not open under my account shows up very light on task bar but opens fine under my wifes account on same computer

Windows 7 ultimate, after update can not open itunes under my account shows up very light on task bar, but opens fine under other accounts on same computer

Hi M0M1!
I have an article for you that seems to describe your issue and can provide some helpful troubleshooting steps for this issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Specifically, you will want to focus on this section of the article:
User-specific troubleshooting
If you experience the issue in one particular user account, the suggestions below may resolve the issue. Before proceeding, you'll need to make hidden files and folder visible in Windows using steps 1-5.
Remove iTunes Preference files. Some of the files that iTunes stores settings and preferences in may be unusable. iTunes saves its preferences in two folders. Move one of them to the desktop and test to see if the issue persists. If it does, move it back and remove the second folder. The locations for the preference folders are:
c:\Users\username\AppData\Local\Apple Computer\iTunes
c:\Users\username\AppData\Roaming\Apple Computer\iTunes
Create a new iTunes Library.
Hold the Shift key while opening iTunes. You'll be asked to choose an iTunes library.
Choose Create Library.
In the following window, select a location to save the new iTunes Library.
Click Save. iTunes will open the new library. After you close iTunes, you can always select the original library by holding the Shift key while opening iTunes.
Recreate your iTunes Library. If your iTunes library has become unusable, rebuilding it may resolve the issue.
Check for issues with content files. Sometimes an audio file can cause iTunes to quit unexpectedly or stop responding when it's analyzing gapless playback information. To determine which file may be causing the issue, follow the steps below:
Quit iTunes.
Navigate to the iTunes folder:
Windows Vista: c:\users\username\Music\iTunes
Windows 7 and Windows 8: c:\users\username\My Music\iTunes
Move the iTunes Library.itl file to your desktop.
Open iTunes. You shouldn't see any content in iTunes.
Choose File > Add Folder to Library.
Navigate to the folder where your music is located:
Windows Vista: c:\users\username\Music\iTunes\iTunes Media
Windows 7 and Windows 8: c:\users\username\My Music\iTunes\iTunes Media
Choose an artist, album, or song to add to the library.
Wait for iTunes to successfully add the item to your library and perform the gapless playback scan.
If successful, continue adding songs to your library.
If there is an issue with one of your files, you'll notice your issue reappear after you add it to the library. You should repeat these steps, being careful not to add the files that caused the issue.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

My itunes account shows I have a balance of 5.37 but when I go to pay for a song for 1.29 it will not let me access thia account. Instead it asks me to pay with a credit card.

My itunes account shows I have a balance of 5.37 but when I go to pay for a song for 1.29 it will not let me access this account. Instead it asks me to pay with a credit card. Do these benefits age off. It's been awhile since I used it. Thanks

It says   at the top      under Redeem after I touched that:
          $14.73
Account: [email protected]   (my account name)
Enter your Gift Card or Download Coad

No accounts showed up after running reconcillatio with SAP HR adapter

Similar Messages

Maybe you are looking for