No accts maintained for company code clearing between comp.cds 1000 and 000

Dear all,
I am doing STO between company codes  with UB doc type, and I am getting error as " No accts maintained for company code clearing between comp.cds 1000 and 0001."
how to resolve  this. plz give steps?
Regards,
Prashanth

Hi...
AS per me OBYA is the  Transaction code to maintain account
determination for Cross company code Transactions.
Plz go ahed & confirm.
S..tosh.

Similar Messages

  • No accts maintained for company code clearing between comp.cds RTIL and RCP

    Dear sir
    i am stock transfer in one plant ot another plant  on 301MVT use in MB1B t code that time below error is showing
    No accts maintained for company code clearing between comp.cds RTIL and RCPL.

    Hi,Since you are doing 301 for plants in 2 different company codes you need to maintain CC clearing account,it will not required if do this scenario in same company code, Maintain the Company code Clearing account between 2 company codes through transaction OBYA with proper GL account.

  • No accts maintained for company code clearing between comp.cds 8490 and 062

    Hi,
    Error when iam doing the PGI:
    No accts maintained for company code clearing between comp.cds 8490 and 0627.
    What settins are missings. This delivery is normal delivery only.

    Hi,
    If you are doing intercompany transaction then you need to assign GL accounts in tcode OBYA.

  • No accts maintained for company code clearing between comp.cds

    Hi All,
    I have the following issue when trying to carry out inventory clearing using LI21.
    When I carry this out for Plant B all is OK.
    When I try it for Plant 'A' I get the following error.
    No accts maintained for company code clearing between comp.cds A and B.
    When I clear inventory from plant A why would the system look at plant B?
    This does not occur when clearing from plant 'B'.
    I am convinced it must be a WM setup issue, but could be FI.
    I am not a WM guy but need to resolve this issue.
    Thanks
    Stuart

    In LI21 system will pick up the quantity from storage type 999.
    It will clear this storage type and tie up the WM-IM stock for a particular plant.
    This error message which u have mentioned usually comes when u are doing a stock transfer between 2 plants in different company codes.
    system looks for a GL account in transaction type BUV in tcode OBYA.
    Check this setting also .

  • PGI-No Accounts maintained for company code clearing between company codes

    Dear Expetrs,
    When i am doing PGI getting error that is no accts maintained for company code clearing between 0010 to 0035. This is intercompany process. In our intercompany company codes is 0010 and 0020. So we maintained already clearing acconuts between 0010 and 0020 in OBYA. But when am doing post goods issue... getting error no accts maintained between 0010 to 0035. Actually here supposed to take clearing accts between 0010 to 0020. I couldnt understand why its taking 0010 to 0035. Could you please suggest me where i did mistake, Please suggest me ASAP.
    Tanks & Regards,
    VS

    Dear Lakshmipathi,
    Here am pasted the OBYA Screen...whatever i maintain pls check and suggest me. i am suspecting on Debit posting kes and credit posting keys maintain as 01 and 31 is corect.
    Transaction          BUV   Clearing between company codes                                                                               
    Posted in             0016                                                      
    Cleared against       0013                                                                               
    Debit posting key    01                  Credit posting key   31               
      Account debit        7790000013          Account credit       7720000013                                                                               
    Posted in             0013                                                      
    Cleared against       0016                                                                               
    Debit posting key    01                  Credit posting key   31               
      Account debit        7790000016          Account credit       7720000016       
    Thanks & Regards,
    Vasu

  • Excise duty: error 9914 No material data maintained for company code

    Dear all,
    when executing transaction /BEV2/EDDS I get error 9914 No material data maintained for company code in some material documents.
    However, I see material is correct.
    Can you tell me which views of material master am I missing?
    What do I need to check?
    Thanks in advance,
    F

    Settings in material master "Basic view 1"

  • Cross company code clearing between vendors

    Hi,
    I have 2 vendor incoice (KR)in company code 2000. Vendor No. 625001. I am also having vendor 625001 in company code 1000. In company code 1000, I have vendor Payment KZ document.
    I have to clear CC 2000 vendors by using CC1000 vendor.
    Note: In OBYA setting, this vendor is not given. Some other vendor, Customer and GL account are given. Please help me out for this issue.
    Thanks.

    Hello Kannusamy,
    A very legitimate requirement sometimes of this kind given the complex business process we have in the modern times!
    Do the following from an accounting perspective:
    1) check whether your bank clearing accounts allow manual posting based on the configuration or use suspense account
    2) pay both vendors in Co.2000 and keep the payment in either clearing or suspense account
    3) assume co.1000 is setup as a debtor also in co.2000. post the payment to this account which clears everything in co. 2000
    4) In Co. 1000 raise a vendor invoice to settle payment i.e KZ doc. amount in vendor's account and you may have co.2000 account setup as vendor and via clearing/suspense account take the balance to Co.2000 vendor account.
    The above step will leave interco-balance which should be treated according to the organisation's local procedures.
    Hope this provides more.
    CONMJI

  • Number group not maintain for company code

    Hi goodmorning,
    I am doing withholding tax. after completion of configuration setting i execute remittance challana at that time system showing  NUMBER GROUP NOT MAINTAIN FOR COMPANYCODE 1001 SECTION IBT100I 194I AND BUSINESS PLACE.
    company code 1001,
    Section code 194i,
    Business place 100i
    But  i maintain number group , number range and assign nuber ranges to number grop
    please give reply
    regards
    suresh

    pls number range and group assign in sap stadared group.

  • Company code clearing

    While processing for intercompany process  below mentioned error has occurred,
    No accounts maintained for company code clearing between comp codes XYZ to ABC.

    Hi,
    I think you didn't maintained any account for the clearing purpose for intercompany transactions between XYZ and ABC.
    Please maintain atleast one clearing a/c for IC transactions.
    BR

  • Creation of Company for company codes in different companies

    Hi
    We have a Company 1000 in India and company codes 1000 and 2000 are assigned to it in sap (Indian Co).
    Now we have a requirement to open new co code in Sri Lanka. Do we need to define a new company also for Sri Lankan Co code or we can use the same company 1000 for Sri lanka co code.
    This is urgent..
    Regards
    Ajay

    Ajay Verma wrote:
    Hi
    >
    > We have a Company 1000 in India and company codes 1000 and 2000 are assigned to it in sap (Indian Co).
    >
    > Now we have a requirement to open new co code in Sri Lanka. Do we need to define a new company also for Sri Lankan Co code or we can use the same company 1000 for Sri lanka co code.
    >
    > This is urgent..
    >
    > Regards
    >
    > Ajay
    Purpose of creating 'company' is to define 'Trading Partner', which can be used for consolidation of books at group level.
    If there are inter-company code transactions between these companies envisaged and consolidation has to be done at group level, then I would create a company for each company code.
    I will also configure OB22 having parallel currencies for the new Sri Lankan company code, so that reporting can be done in local currency as well as group currency.
    Edited by: Sankrithi on Aug 2, 2011 9:15 AM

  • Query on Additional Local Currencies for Company Code

    Hi Experts,
    Can I know whether there are any differences in the way SAP logic applies to the following currency types?
    1. Hard currency 40
    2. Index-based currency 50

    Hi,
    Yes I am aware that we can maintain 2 additional parallel currencies for company code.
    Hard currency
    Hard currency is a country-specific second currency which is used in countries with high inflation.
    Index-based currency
    Index-based currency is a country-specific fictitious currency which is required in some countries with high inflation for external reporting (for example, tax returns).
    But, are there any differences in standard SAP logic between these currencies or it is the same?

  • VAT and CST details for Company Code

    Hi All
    I have a requirement to store following details at the company code and plant level in SAP ECC for India implementation. Can someone please guide me where can I store these information in SAP ECC 6.
    VAT - Plant Level
    CST - Plant Level
    TIN - Company Code Level
    PAN - Company Code Level
    Service Tax - Plant Level
    Also, can i store VAT, CST and Service Tax at storage location level?
    Regards
    Diya

    Got the point, my question was wrong. i have to maintain VAT for company code did it using OBY6.
    Have to explore for updating IBAN and swift details now.

  • Material Ledger Additional local currencies for company code

    Hi Expert,
    I would like to add a second local currency in the "Additional local currencies for company code" in order to have 2 currencies available for material ledger. (Material ledger is not yet activated for this company code)
    The second local currency must be the group one "30". Could you please tell me wich valuation I have to choose ? 0 1 or 2.
    I went on the SAP library but I didn't find something clear. I tried 1 but I have an error message...
    Thanks and regards

    Hello,
    I also recommend:
    1442153   Transfer price valuation for material transfers
    532932    FAQ: Valuation logic with active material ledger
    1253944   Activating actual average moving price posting logic w/ ML
    Cheers

  • Search Help for Company Code from Backend

    Hi experts,
    How can I make a SH for company code from backend system? I already made a SH for account assigments from backend with USAGE_SH_F4  functioanality, but i don't know whether I can use it for Company code or not? And how?
    Best Regards,
    Mikhail.

    I need functionality where I will manually maintain backend system, and then I need bind search help for this backend system with my input field for web dynpro. For Account Assignment I use this: http://scn.sap.com/community/srm/blog/2014/01/08/standard-account-assignment-search-helps-in-custom-srm-developments
    But what should I use for company code?

  • No amount tolerance entered for company code

    Hi,
    I am trying to Post G/L account using F-02. I am getting following error
    'No amount tolerance entered for company code xxxx'
    Can anyone help me on this?
    Note: I have already defined tolerence group.
    Thanks,
    Shalini

    can you check transaction code & maintain entriesin
    OBA4, OBA3,OBA0.
    CHANDRA

Maybe you are looking for

  • In and Out points not showing in source monitor

    I've noticed this in the past couple of days: setting in and out points in the source monitor, the indicators don't show in the time ruler.  In other words, even though I set the in and out points, it looks like nothing has been selected.  If I put t

  • Play Count and i tunes, doesn't add the count correctly

    How do I get all my play counts on iTunes. It seems to only list the play count from my first Ipod only. I have 6 Ipods all sync' d with the same I Tunes?

  • Correlation for asynchronous system via websphere MQ from a BPEL client

    I could able to find samples for correlation in BPEL while invoking asynchronous webservices. Query 1. Are there any samples for Correlation while invoking asynchronous system via websphere MQ from a BPEL client? Eventhough I could see some BPEL samp

  • Encountered problem when invoking a Tuxedo service

    Good day. I'm currently encountering a problem when trying to invoke a Tuxedo service from a JCS. The error is a LIBTUX_CAT:488 : ERROR: Invalid data pointer given to tpreturn(). The returned error message to the WLS console was "tpcall invocation fa

  • Want to learn

    Hi All          I want to know about the difference between bw3.5 and bi7 cos am working in bw3.5 and i dont have any idea about bi7 i want to know from the basic wil you send me any document or snap shots regarding the bi7