No apply button in import settings

unable to apply mp3 settings from the advanced page, tryed reloading 7.4.3 still having same problem cannot switch from acc to mp3

Earl wrote:
> I have installed a new BM3.9 server to replace a BM3.7 server.
>
> Both servers currently reside in the same container. Both servers have
> a R/W replica of the container.
>
> When I use iManager to create or modify access rules, there is not an
> APPLY button available to save changes.
>
> I followed TID 3506678, but this did not correct the problem.
>
> I running Netware 6.5 SP6 and iManager 2.60.
>
>
The tid talks about the proxy screen. If you have the issue with rules,
the attribute is BRDSRVS:ACL Info DeviceXML and the procedure and value
tid mentions are valid so follow the tid but just using this attribute
Gonzalo

Similar Messages

HT1476 i-phone3 wont recharge; initially home button wouldn't work. Applied the 'auto-touch button thing' via settings. This worked until I ran out of battery life. Now it won't recharge either via laptop (usually does) or wall switch. Just a blk screen.

i-phone3 wont recharge; initially home button wouldn't work. Applied the 'auto-touch button thing' via settings. This worked until I ran out of battery life. Now it won’t recharge either via laptop (usually does) or wall switch. Just a blk screen.

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

How do I remove an entry from the "Store Files" drop down list in the "Import Settings" section of Aperture 3.3.2

The dropdown list "Store Files" in the "Import Settings" section of Aperture 3.3.2 displays the history of the entries previously added to the list. Some of the entries are no longer valid and I'm trying to delete them but I can't find a way to do this. This is a screenshot. Does anyone know how to do this?

Once again - the Jive system ate my bullet points and messed up the formatting
Is the MacOS X version in your signature correct? Then you cannot be using Aperture 3.3.2?
You should not be seeing duplicate entries in the "Store Files" pop-up menu. This looks like your Aperture Preferences file is corrupted and needs fixing.
Quit Aperture (and log off and on again, if you are running MacOS X 10.7 or later)
Then reveal your User Library (from the Finder's main menu bar, the "Go" menu. Hold down the options-key until the library apears in the drop-down menu)
In the Library folder select the "Preferences folder and locate the file "~/Library/Preferences/com.apple.Aperture.plist"
Now you can either
remove the com.apple.Aperture.plist file to the Desktop, to force Aperture to create a new one, but you will have to set again your Preferences from the "Preferences" panel,
or make a backup copy of the file and edit it, if you are an experienced programmer and have Xcode installed. To fix the drop-down list you need to edit the item "RecentReferenceFolders" and delete the redundant folder names. Enter "recent" into the search field to find it quickly. If you click an item in the list, plus/minus buttons should appear. But only try this, if you know how to edit property lists, otherwise it will be much safer to delete the faulty list and to set your preferences again from the "Preferences" panel.
Regards
Léonie

I selected "ACC Encoder-iTunes Plus" for import settings to import cd's. I assumed music purchased from the iTunes Store was mp3 format.Which is it?

I selected "AAC-iTunes Plus" as my import settings when importing CD's to my iTunes library. When I reviewed "get info" on purchased songs from iTunes, it says "Kind: Purchased AAC audio file". All of the purchased songs in my library say this. I assumed all purchased songs were "automatically" imported in mp3 format. Do the import settings I chose also apply to purchased music? Also, what can I do to have my library songs changed to mp3 format?

All songs sold in the iTunes Store are AAC/256.
The import setting affects ripping and conversion. It has nothing to do with purchases from the iTunes Store.
If you need MP3s, you can convert your AACs by using this procedure: http://support.apple.com/kb/HT1550 But it would be easier to buy MP3s in the first place, for example from Amazon MP3.
MP3s can be used in iTunes or almost any other player, program or device.

Does iPad/iCloud photo resolution setting apply to computer imports?

My iPad / iCloud settings are to store the higher quality original photo in iCloud while the iPad automatically, in the background, makes a second smaller version for local storage optimised for the iPad. This is a setting on the iPad. Does this function still apply when I import from a computer?

I read that if I use the Camera Connection Kit to load photos directly from my camera to the iPad, that the iPad "modifies/reduces" the resolution of the jpeg (if they were taken with a high res camera).
It doesn't.
The original file from the camera is copied to the iPad and it is not modified.
When you connect the iPad to the computer, you can then copy the original to the computer.
The reason I am concerned is that I want to use my iPad as a repository for my images while I am traveling and then move those photos to my computer for editing when I am back home. BUT if something is going to be lost in this process
Nothing is lost from CCK to iPad to computer.
When syncing photos back to the iPad thru iTunes, the photos get reduced/optimized to 2304 x 1536.

Log & Transfer Question - Import Settings

Is there any way to save my import settings in Log & Transfer (FCP7)? Every clip I import goes back to the default of 4 audio channels...and I don't want all four channels. Aside from manually changing the audio setting for each clip in the batch, is there a way to save a my audio setting for the entire batch of clips?
Thanks.

while you may not be able to save a setting, you can apply a change to all clips in the L&T bin.
In the bin, highlight the clips you want to have the same settings then, in the viewer window in Log & Transfer, select the settings tab, make the changes to the audio then apply to all.
x

When I pressed Apply button after autoupdate, i get window reading as connecting to server and it goes on for hours together and no end and no further message.

I proceeded to update automatically and the I got the window to apply. I clicked the "Apply" button. The browser closed and reopened immediately, and my antivirus asked me whether to allow the software. I clicked allowed. Then I got the window reading as "Connecting to server etc.". I was waiting for further development. But this window keeps on showing same message without any progress even after I kept the same opened for nearly1 hour.

If you have problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Why is my apply button grey? It only has revert.

I just updated my iPhone 3GS to the IOS6. Now when I sync my iPhone to my iTunes, my apply button is greyed and it only says revert. Can anyone help me please?

Hi rebeccapatterson,
Thanks for visiting Apple Support Communities.
See this article for some troubleshooting steps that can help:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Cheers,
Jeremy

Changing import settings for brightness etc

Hi there,
I'm importing RAW files from my Canon 5D, and they all come in with the brightness set to +50 and the contrast to +25, the blacks are +5, and the tone curve has a slight "S" curve on it. I appreciate this is probably a "good thing", but how do I get LR to import with entirely neutral settings?
Many thanks
J

ThEse are genera;ized settings that aDobe figures will work for many users. Do your own presets, more than one if you have to, and apply appropriately on import.
If you have more than one camera you might want more than one for the differences, for instance.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
http://donricklin.blogspot.com/

Change Import Settings?

Can someone give me an AppleScript routine that will change the parameters of the import settings? Presently I can change codecs like MP3 to Aif or something else, however, I cannot change the MP3 settings from, say, MP3 192kbps for music to MP3 32kbps for Podcasts. I want to stop having to go into iTunes, preferences, change the setting, close the window, etc. etc.
Thanks!

Schneb,
Surprised no one else responded.
There are possibly two other ways to have this work:
1) System Events using GUI control;
2) Modifying the iTunes preferences file directly.
Just from a brief gander it looks like 1) is possible but will take some playing and I need to know exactly what it is you are doing, i.e., which menus, buttons and settings you are choosing. Let me know if you are interested.
I also looked at the iTunes preferences file and nothing really jumped out but maybe someone else can decipher it for you. If this is possible this would be faster and less prone to errors.

Changing Import Settings

When changing the import settings to AIFF Encoder, and choosing CUSTOM, how do you get these settings to become fixed. When I close the window, the settings revert back to the default. I'm looking to import higher quality files, but can't sem to get ITUNES to "APPLY" the settings that I want to change. Any thoughts or advice? Thanks in advance.....

TThere are no import settings. The application imports in whatever settings the media is.

AS CS3 - Setting the EPS Import Settings

I am trying to create an applescript that sets a whole series of preferences in Indesign CS3 so I can quickly and easily synchronize my studio with the same settings.
It had been going well until I was stumped by the EPS Import Settings of which I want to have clipping paths applied and I want to rasterize the postscript for the proxy.
I have tried something like this:
tell the EPS import preference properties
set EPS frames to true
set the EPS proxy to "Rasterise the Postscript"
end tell
Of course I am failing big time somewhere, any help would be greatly appreciated.

On 3/9/08 10:27 AM, "Dylan" <[email protected]> wrote: > set the EPS proxy to "Rasterise the Postscript" The two options for EPS proxy are "always" and "as needed" (without the quotes). -- Shane Stanley <[email protected]>

What are import settings for downloaded purchases?

import settings on itunes isnt the same settings for purchased downloads?

Import settings do not apply to purchases. When you purchase a download, it comes in the format provided by the store.
Some common formats are AAC/256 (iTunes Store), MP3/256 (Amazon MP3), and MP3/320 (Google Play).

Missing refresh and apply buttons?

My iTunes iMac screen has been growing taller! I can no longer access the refresh and apply buttons on the bottom. In fact, the entire bottom of the window is down, off the screen, even if the top of the window is as high as it can go.
What I have tried and does not work:
- Green resize button just turns the screen into a slider, not a smaller screen.
- The two arrows on the upper right only makes the window bigger, not smaller.
- Changing the resolution in Settings > Display only makes the screen bigger. I've tried several scale settings.
Can anyone help?
(Yes, I'm using Mtn Lion and latest iTunes updates.)
Thanks!

Thank you! That did the trick. iTunes filled the whole screen, but I got the button back. Then I could use the size arrows in the upper right hand corner to get iTunes back to a reasonable size, buttons and all!

Applying Two Different Sharpening Settings to a Photo - LR5

In Photoshop, I would apply 2 Unsharp Masks to a photo with different settings to achieve the look I wanted. Is there a way in Lightroom 5 to achieve this? The only way I can think of is to apply one of the settings, export as jpeg, import, and then apply the other setting. Is there an easier way?

Not really. Lightroom's sharpening is capture sharpening, like you'd do in Adobe Camera Raw, so it's for subtle correction of the softness of images. Clarity will produce a sharpening effect too. But without knowing roughly what you're doing with Unsharp Mask, it's hard to say whether you can do the same in LR.

No apply button in import settings

Similar Messages

Maybe you are looking for