No archive information found for object type and document type

Hi All,
When i try to view the print preview for a perticular doc type, system is giving the error as "No archive information found for object type and document type"
Diagnosis
    No information was found about optical archiving. This may be due to
    either of the following reasons:
    1. No valid archiving parameters were passed
    2. Your system is not configured for optical archiving
System Response
    Processing is cancelled.
Procedure
    Specify valid archiving parameters or check whether your system is configured for optical archiving
Regds,
CB

Hello,
You are trying to Print & also archive by selecting the option Print & Archive.
You have to do archivelink configurations and then create document type and assign to the object type with content repository with archivelink table.
If you want to archive the spool or output then you have to use object type as DRAW. If you are archiving invoice document or letters or so on then you have to know the object type/Business object of the transaction.
Please note that for archivelink configuration, attachment will be either stored in archive server or in SAP database table based on business requirement.
Hope this will give you some understanding on archiving area.
-Thanks,
Ajay

Similar Messages

Error:-No delivery type defined for supplying plant and document type RB

Hi,
Here issue is such that while creating purchase order(Return order type)the error coming as follows.
"No delivery type defined for supplying plant and document type RB"
Scenario:-There are some damaged goods which are coming from france vendor to ukrain customer,now ukrain customer wish to send back the damaged goods to france.
Looking forward:-1>Can anyone please let me know if there is an any customizing setting required if yes then how to maintain(navigation).
2>Is it something like practically it is not possible as goods are dispatched back to the country from where it is coming.
Thanks for your help !!!
Dharmesh

Hi Naveen,
Thanks for the information !!!
Futher while creating PO i am getting an error message as purchase org. not responsile for plant how to solve this error can you plz let me know.
Regards,
Dharmesh

In PO No delivery type defined for supplying plant and document type MRO

Hi,
i need urgent solution for this problem please.
i am getting this error while creating stock transport order PO(intercompany)
No delivery type defined for supplying plant (ex:1500) and document type MRO .
thanks
madhu

Hi,
i am getting problem in vendor master data
1) recently we started inter company stock transfer order (STO)process for a vendor (delivery plant), the same vendor was using before for internal procurement for some other company code /plant, i made settings in vendor master last screen ie conditions , sales data and control data ,and took path from main menue selected extras-> addtional purchasing data tab to enter plant under plant assignment tab to work STO. now we are unable to create PO for other company and pur org(non STO company code /plant) with the STO vendor,if i remove plant under plant assignment tab in vendor master , it is effecting inter company STO,
i need solution for this , please help me by giving valuable solution.
Thanks and Regards
MM

To create new billing type and document type and put restriction for any pa

Hi,
please let me know the procedure for creating new billing type.
Can we restrict billing type to document type for any particular country by defining it in user exit.
Rgds,
Dharmesh

Hi,
>
> please let me know the procedure for creating new billing type.
>
Goto menu SPRO->Sales and Distribution -> Billing -> Billing documents -> Define billing types. Here highlight one of the standard SAPbilling type (which may be relevant to your business requirements), then click on copy as button to create a new one. You need to name that should start with Z, for example ZF2 and then save it.
>
> Can we restrict billing type to document type for any particular country by defining it in user exit.
>
This you can achieve in copy control settings. Go to menu SPRO->Sales and Distribution -> Billing -> Billing documents -> Maintain copy control for billing documents. Here you can select, according to your scenario, copy control to deliverydocument to billing document or Sales docuement to billing document.
Then, here also you can copy the standard copy control document types provided by SAP, and rename to your newly created Zdocument type. The source doucment (delivery or sales order) is normally assigned to a particular sales organization (which to a company code). Normally the company code is created in a particular country, hence the billing document falls only on that country.
Regards,

Exise Transaction type and Document Type for part 2 record created by J2iun

Hi All ,
We utilized available credit of SERVICE TAX (HCESS and ECESS) and CENVAT (of both RG23A and RG23C) credit against payable SERVICE TAX ( ECESS and HCESS).
At the time of save , system has generated accounting document.I have checked generated accounting document which is perfect.Here the document type selected by the system is ED.
But when I check corresponding part2 entry (in table J_1IPART2) there system has not updated any value in fields Exise Transaction Type (TT) and document Type while internal document and Financial Year are updated with 0 value.
I am not sure if system behaves in the same way for J2IUN generated PART-2 entry.
I need your help to understand it.
Regards
Shrey

Hi,
There is not any transaction type for Excise Utilization and determining the accounts of the fortnightly utilization.
The credit account of the transaction type u2018DLFCu2018 is used as the debit account here. For the credit side we pick the debit accounts from the GRPO, EWPO and TR6C transactions.
This is the reason system only generates a Part II Serial No and updates in table.

Movement type and document type

All SAP Gurus,
I know the movement type (541, 543, 261, 262, 281, 282, 601, 602). How to know the Document type of thpes?
Thanks,
R. rajan

Hi
Document types are attached to the transaction being used, not to the movement types.
You can check the same in transaction OMBA or
SPRO-> Materials Management-> Inventory Management and Physical Inventory-> Number Assignment-> Define Number Assignment for Accounting Documents
Under Allocated document types to transactions in the transaction click on the Goods issue document type
For the Transactions you can see the Document types attached
These transactions are attached to the Movment types in OMJJ transaction, select the movment type click on Allowed transactions page.
So based on the transaction attched to the Movement type the
document type is determined for the Movement types.
Movemnt type Linked to Transaction & Transaction linked to Document type.
Thanks & Regards
Kishore

Regarding Delivery and document type

Hi Gurus,
I copied both the delivery type and document type from NL and UB and I also assigned delivery type and checking rule to the supplying plant in SPRO- LE - MM- PUR- PO - set up STO. and also assigned the Document type in SPRO- LE - MM- PUR- PO - set up STO assign doc type, one step....
But when I create the STO the system issues a warning message that
Doc. type YUB should be used for suppl. plant XXXX and receiving plant XXXX
Message no. 06674
can you please give me some suggestions
Shane

Hi narayan,
I am working with INTRA company STO and I have checked with the config what i have did again and now I can get the shipping tab.............. only thing is before I have forgot to assign the Issuing storage location in the transaction process. So now i can create a STO.
Now I am not sure how and where we need to make changes so that the process doesnt ask for Issuing storage location information and still create the STO between two plants in a same company.
Thank you for your responses. They really helped me in figuring where exactly i am going wrong
Shane

Posting Key and Document type

Hello,
I have just detected an inconsistency in one of my SAP environment (Development). I have an invoice posted from the SD module, document type of this invoice is RV.
If there is a reason to cancell this invoice, the transaction used is VF11. The document type in SD for this cancellation is S1. Thereafter an FI document is generated with document type AB.
Even though the settings in both Production and Acceptance and Developement are the same.
I have realised that the initial document when cancelled (reversed) has an FI document RV and posting key 11. whiles in customizing the settings for posting keys and document types are different from what has been customized. Below is my current settings.
The posting key 01 has a reversed posting key 12 and the document type RV has a reverse document type AB. This customizing is in correct in SPRO.
Transactions : OB41 and OBA7
Can anyone help on this....
Thanks
Elvis

Hello,
Did you verify whether AB document type in OBA7 is marked in "Account Types allowed" the Customer checkbox?
If not, maybe that is why it is not selecting AB as the reversal document type for RV, even though it is set up in RV document the AB document type as reverse document type.
Other than this (if the mentioned above doesn't solve your issue), I would say there should be any user-exit that can be changing the document type, according to some specific business rule of your SAP client or even a substitution.
I hope it helps you.
Regards,
Daniel.

Document types for Entry view Vs document type for General Ledger view

Dear experts...
Can you explain what is the deference between Document types for Entry view and document type for General Ledger view?
Dasu

Hi,
Document Types for Entry View
In this activity, you define your document types. Document types are used to differentiate the business transactions and to manage how document are stored.
Document Types for General Ledger View
You define for non-leading ledgers the document types for the documents in the General Ledger view. At the same time, you assign for each document type a number range to be applied in the     assignment of document numbers:
    o   You do not need to make these settings for your leading ledger
        because, in the case of this ledger, the document number in the
        entry view always corresponds to the document number in the general
        ledger view.
    o   You only have to make these settings for any non-leading ledgers
        that have a fiscal year variant that differs in at least one company
        code from the fiscal year variant of the leading ledger in this
        company code. In this case, the document number in the entry view
        does not correspond to the document number in the general ledger
        view and you have to define a separate document type with document
        number assignment for the general ledger view.
        For all non-leading ledgers that, in the company code to which the
        postings are made, have a fiscal year variant corresponding to the
        fiscal year variant of the leading ledger in this company code, the
        document number in the entry view always corresponds to the document
        number in the general ledger view.
        Note
        The need to define a document type for documents in the general
        ledger view depends only on whether the fiscal year variant of the
        non-leading ledger in the company code (to which the postings are
        made) differs from the fiscal year variant of the leading ledger in
        this company code.
Regards,
Kiran

What is the field and Table for "Batch Class" and "Class Type" in QM.

Hi All,
What is the field and Table for "Batch Class" and "Class Type" in QM.
Thanks,

Hi,
For batch class the class type value is '023' . This you can find from KLAH table and the fileld for class type is KLART..
And also all the data related to batch class are found in tables INOB, KLAH,KKSK and for the characeteristics of batch materials you can refer AUSP table.
In INOB table, for batch class, you need to give 023 in KLART field and value MCH1 in OBTAB filed.
Please check this and let me know if this you need any more details?

How to trigger a form based on object type and process type

Hi all,
I am new into SRM.. I have been asked to develop a form by cloning an existing standard form..
Using bbp_output_change_sf badi you can trigger the form by passing the object type but the scenario is such that depending on the object type and process type the new form should be triggered.
The parameter iv_object_type passes the object type but how could i pass the process type ?
In the badi I noticed an import parameter is_event that has a field called transction_type that carries the process type but this field never got populated when i checked using debugger.
Please help as to how i can trigger the form based on the object_type and the process_type.
Thanx in advance.

Thanx again Jay Yang.. Well is there any possibility that you could get the items that were confirmed..
Let me eleborate..
Suppose in the PO u order an item for 10 nos and 5 gets confirmed and u return 2..
Well in my case it is that i need to fill up a field Qty returned / Qty confirmed..
I was able to get the number of items from the PO by passing the the passing the parameter to the FM "bbp_pd_conf_getdetaill"
but i dont know how to get the number of items been confirmed..
The quantity field in the line item structure gives me the number of items returned..
Can u tell me how to get the number of items been confirmed....

Funds mngt - Number range 01 not found for object BULI_DOCNR

Hi all
need some urgent help to crack an error am getting while creating a budget in funds management.
the error am getting is
"Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
I have maintained the number range in
Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
But am still getting the error....
will really appreciate some help on this
thanks in advance

The number range object refers to "FM budgeting line item number "
Are you using Former budgeting or BCS ?
Try t-code- ok11 and ok91 under former budgeting.
Thanks
Siva

No suitable settlement rule found for object

Dear all,
i have a production order which initially does not have the settlement rule and this causes it to appear in my WIP report even though it has been closed. I tried inserting the settlement rule in the production order, calculating the variance and posting of the settlement but an error msg of
"No suitable settlement rule found for object......" appears while doing the variance calculation. Any suggestions on how can i resolve this issue.
Thanks in advance 1st.
Regards
YM

Hi,
check what the setting for KV206 is in the user defined messages (TA OPR4_KKS1). If it is set to ' E ' try setting it to ' * '.
Regards
Karl

Idoc type and message type for Planned Independent Requirement (PIR)

Hi
Can anyone please give me the information on the idoc type and message type for Planned Independent Requirement(PIR)?
And also the prerequisites to use them.
Regards,
Lohitha
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on May 23, 2011 10:45 AM

Hi,
You can use IDoc type WMMBID02 with message type WMMBXY.
Also please check test program RLMBXY00 to simulate IDoc WMMBID02.
Regards,
Ferry Lianto

When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
Message Edited by bleakreserve on 02-3-2005 06:34 AM

No archive information found for object type and document type

Similar Messages

Maybe you are looking for