No audio after I Print to Video...help!

After I have printed to video there is no audio attached to my edited sequences, even though during playback in the timeline there is obviously audio. When I print to video how do I make sure the audio goes along with it?

Monitor audio from the deck you are outputting to. Make SURE audio is being sent to the deck...if via firewire, make sure in the Audio/Video settings you have audio out set to firewire.
Shane

Similar Messages

  • Audio is Muted after Cancelling Print to Video

    I was in the process of Printing to Video, and then cancelled it. After doing so, now when I check my project on the timeline, there is no audio. I checked to see if the mute button was checked and it wasn't.
    Any help on restoring audio would be appreciated.

    Change the View>Video>Firewire to Real Time or Canvas playback.
    Or close FCE remove the camera and re-open FCE.
    Al

  • Print to Video help please

    I am getting audio recorded to my deck but no Video.
    Any ideas what to do?
    Thanks much!

    Thanks, my first post.
    OK, the deck is a Sony DVCAM.
    I am using Final Cut Express on a MacBookPro 10.4.11
    I have a firewire cable connecting the two. (I also tried using my Panasonic DVX 100B camera with the same result - audio but no video).
    I chose Refresh Video Devices
    Clicked on the timeline, then Print to video.
    I gave it 6 seconds of color bars, then when it said it was 'ready, I hit return and the deck began to record.
    I cannot see any video on my monitor, (or int he camera screen), but I do see the audio meters moving. During playback the audio is there but no video.
    Thanks for any help/suggestions. Very much appreciated.
    Jamee

  • Weird audio issue when printing to video

    I am attempting to dub a couple of old projects to tape using the Print to Video command (firewire connection to Panasonic DVX-100A MiniDV camera). I have used this method many times in the past with success. However, I have now tried two different projects tonight and had the same strange issue: The project plays back perfectly normally in the timeline, through the computer speakers, but when I Print to Video, there will be one part where a small audio "blip" can be heard. It sounds like either a snippet of tone or the sound of un-rendered audio... except it's all rendered.
    Anybody have any suggestions? It's really weird that it plays back something different in Print to Video than it does in regular playback... Any help is appreciated.

    That did it, thanks! I feel kind of dumb, I've never used that function before. Is that something I should have been doing all along? Anyway, thanks again. It's nice to get a response and have it work on the first try. So refreshing.

  • No audio when I print to video

    Video is fine, in AV settings I have Firewire audio selected. Audio sounds fine from timeline but when I print to video i get nothing not even a tone with bars at beginning of print down. I've tried different cameras so I'm thinking it is a setting in FCP that I don't have right... Any suggestions? could something like this be the cable I'm using or a weird Firewire problem like not enough power because too many devices are plugged in? I know that the "official" word is (with puffed out chest) Firewire can handle up to blah blah blah devices, But my experience with Firewire is that it is finicky. So, just wondering if it could be something like that. Off to do some experimenting...
    Ive tried unplugging all other firewire devices and works fine on my powerbook with what seems to be the same settings...?

    Hi,
    It appears from what I found online that there are some A/V settings you should check before exporting your video.
    Check out this first link(make sure to click in the " Re:" lnks to read the replies from other users):
    http://forums.creativecow.net/readpost/8/967816
    Also, there is another link with another users experiencing the same problem:
    http://www.2-popforums.com/forums/showthread.php?t=71453
    Let me know if that information helps you,
    Vicente

  • I get silent audio after i separate the video and audio

    I'm using vintage video that I downloaded from the Internet.  in one project I separated the audio and video, ditched the audio, and exported, via share, the visual clips I need for my final video.  in a new project, I imported the segments to place over the audio I created with music software.  the segments have a silent audio, that is, it has a part that goes on the audio track, but it's silent.  it covers my audio and I can't hear it.  I don't know why this happens or how to avoid it.  help!
    Thanks,
    Rosateresa

    Rosateresa
    What version of Premiere Elements are you using and on what computer operating system is it running? Are you working with sources that come with copyright? For now I will assume no copyright protection involved.
    I understand what you are doing through the point that you get rid of the original audio of a video file that has audio linked to it.
    And, further I understand that you bring just that export video portion into a new project which has your "audio ...created with music software".
    But after that I need clarification.
    1. I would expect that, in the new project, you import the video to Video 1 to relate to the music that is already on Audio 1 or the Soundtrack.
    I lose you when you write
    the segments have a silent audio, that is, it has a part that goes on the audio track, but it's silent. it covers my audio and I can't hear it.
    2. I am wondering if you are really saying that when you export the video portion of your file, the export has a video and audio component (silent audio component)? If that is the case, in the export settings under the Advanced Button of the export preset selected, place a check mark only next to Export Video. Remove the check mark next to Export Audio.
    See example below from Premiere Elements 12 Windows. On the left...Export Settings and the Export Video and Export Audio boxes for check mark as needed. In the example I have a check mark only next to "Export Video".
    3. But you can do everything in the same project, I would think. Right click the video with its linked audio, select Delete Audio. And then import your music into
    that same project.
    ATR

  • Cant print to video, help!

    Hi there. I am trying to print to tape using FCP5 and the sony MVR 15E deck and am getting nowhere fast. I have communication between the deck and FCP, but when I begin recording nothing is being transferred and I get nothing in my external pal monitor, though it does play on my computer monitor. Please help
    Thank-you

    is the other monitor NSTC? if so that is why the video is NTSC and your trying to watch it on a PAL monitor. i am not really sure how to change that if it is the case. now since you have countdown turned on try closing and then reopen it and try again. but first try to play the tape in your camcorder.

  • No audio after 15 seconds of video

    so i can play a video on my new ipod, sounds and looks great, but after 15 seconds or so, the movie pauses for a second, and then continues without sound. the sound is fine thoughout the whole video in itunes and also in quick time, but not on my ipod after that first 15 seconds. does anyone have a solution to this ? any help or advice in greatly appreciated.

    hiya!
    first check the ipod software version on your ipod:
    iPod: How to find software version
    if it says 1.1, see:
    Video created with third-party software plays incorrectly on iPod
    love, b

  • Printing to video

    so i've been working on this project in final cut express hd and i'm trying to print to video, but no matter what i do it will not go back to the tape. i've watched the tutorial dvd that came with it and have done everything it says but it won't record back to my camera. everything is connected and when i hit print to vid it begins recording(turns my camera to record, but nothing appears on the screen. it just records blue.) the movie continues to play but wont export. please help!

    I have a brand new 24 inch iMac with 4 gigs of RAM. I'm using a Sony HDR-HC3 high def mini DV camera. The setting for the media is Apple Intermediate Codec 1080i60. I have been able (though I'm not sure why) to get a picture recorded to the tape - I found an obscure setting buried in the camera's menus that should have been set to "no HDV iLink connection". But the picture I get is very small except for titles which are just the right size. I shot the video in High Def. I am connected to the computer via a firewire (400). I have a dedicated 250 gig LaCie hard drive. I am running FCE 3.5.1. After a print to video, the video on my timeline has changed to the smaller size and the titles are the right size. So when preparing for the download, the project is changed. I can't seem to change it back.
    Thanks!

  • Print to Video FCE4.01 Canon HV30

    For some reason I cannot get the Print to Video function to work with my HV30.
    FCE captured the video perfectly, but when the Transcoding to HDV process completes the camera records nothing.
    Any ideas?

    There is no easy setting for Apple Codec. Are you using HDV 1080i60?
    There's most likely a problem using the external drive and communicating with it. What I'd suggest is exporting a self-contained QuickTime Movie to the internal drive. Disconnect the external drive. Reimport the the export file and place it in a sequence. Trash your preferences and reboot. Then try printing to video the single file. Make sure you render everything and mixdown the audio before you print to video.

  • HELP!!! need to print to video ASAP. NOT WORKING

    Hey,
    I've been trying to print to video a 3 hour piece, well, it's segments of many movies for a film festival. Anyway, i've used like 4 decks now, trying to capture on dvcam, and everytime i record something to tape, it just records like pink fuzz. i've tried using different firewire ports, and messed around with the settings. so does anyone know a sure fire way of allowing me to print to video?
    Thanks,
    Jared

    I had this happen to me a couple of days ago, and this is what I changed:
    I opened the Audio/Video Settings, then selected the A/V devices tab. Then I selected the Different Output for Edit to Tape/Print to Video check box and set the video to Apple FireWire NTSC and the audio to Firewire DV.
    After doing changing these things the video signal was sent to the camera and I was good to go. Hopefully that's what you need to change.
    Hope that helps.
    jesse.

  • Having trouble with audio edit to tape, print to video ok

    Hi all, please go easy on me, this is my first post.
    I am having difficulty getting audio on to tape via 'edit to tape'.
    The hardware is blackmagic decklink extreme, feeding component video and analoge audio to a UVW-1800P.
    I can do a print to video on a crash record and the audio works that way, but edit to tape does not.
    I have tried both deck link and built in audio in the audio settings and the FCP a/v settings, seperate and ganged output settings, I have set the insert settings to 2 channel Sony, reloaded the decklink drivers.
    The irritating thing is the audio is there whilst cutting, but as soon as I try edit to tape there is complete silence. The important thing is that it worked a few weeks back but does not now, it must be a setting?
    Thanks in advance for your help.
    This machine I am working with this week is an Intel MacPro running FCP 5.1.2 and Mac OS 10.4.8
    G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade   Mac OS X (10.4.8)  
    G5 Dual 2GHz-Blackmagic Decklink Pro, G3 with Sonnet G4 upgrade   Mac OS X (10.4.8)  

    I had this same problem and this resolved it for me:
    -Go to your "Settings" icon and click on the "General" tab.
    -About 2/3 way down the page you will see "Use side switch to:" - make sure "mute" is checked rather than "lock rotation."
    -Then make sure the side switch, located next to the volume toggle switch on the side of your ipad, is moved to the right (no red dot showing).
    My audio worked fine in embedded videos after I did those two things.  Hope it works for you.

  • Audio issues -- Print to Video

    Audio is good as print to video starts, but either drops out all together, or goes out of sync after 30 minutes or so.
    Thanks for your time in advance.
    Chris

    Have you tried goat sacrifice?
    The results for you may vary - but not for the goat.
    If that does not help, we can progress to the Graduate solution. As Dustin Hoffman learns as the Graduate, " one word for you - audio mixdown".
    Ok, so its two words and that isn't what they said anyway ... still, try to compress down the number of audio tracks (audio mixdown) to ease the computing demands on output. Also, make sure all areas where there is audio are covered by video - for example - put a black slug in the video track if you fade to black in an area where there is still audio running under.
    If these don't work for you, it would help us enormously if you gave some basic info about your project. FCP version? Media type? VTR? compexity of edits? you know the stuff...
    cheers
    x

  • Help urgently needed with edit to tape / print to video error

    I have tried to edit to tape and print to video a sequence (0my whole project, worked for way too many nights to let go... so frustrated and sad right now because it doesn't work.
    The project is saved on an extern harddisk, my harddrive on teh pc is too full (not big enough).
    My camera and FCP connects but all the time I get an error that 'the tape may be locked' . AND I HAVE TRIED WITH DIFFERENT TAPES, none of them were locked!
    I am not really sure how to set the camera in this VTR mode... I have tried in the settings to set it in webcam mode... and I have tried without... and I dont have a button or setting called VTR, only a *PLAY' option or a 'FILMØ option....
    My A/V settings are FireWire PAL and DA PAL 48khz ... however have no ide what that means or if these should be changed...?
    I checked from apple but cannot find my DV cam on the list... hmm, does that mean I cannot do edit to tape recordings???
    My Dv cams informations:
    NV-GS140 by Panasonic, Model 0x80330B, 0x804580114B5DD1
    I checked the system settings and was able to the FireWire/NV-GS140 Unit
    I have a MacBook1,1 / Intel Core Duo/ 2 GHz
    OS 10.4.11
    I use the version FCP 2
    Please help me out, I am really without any good suggestions how to proceed!

    You're going to have to use a dvd authoring program. Burning the seq to a dvd qill just create a qt movie on a dvd data disc. It won't create a dvd video disc that plays in a dvd player.
    Export from fcp a QT movie, current settings, self-contained. Use Anamorphicizer (http://mac.softpedia.com/get/Video/Anamorphicizer.shtml) to make imovie recognise it as 16:9. Then import that file to idvd.
    Or you can drop your 16:9 sequence into a new 4:3 sequence to letterbox it, then you can do the export as above but skip the anamorphicizer step.
    It's better to use compressor on the original 16:9 sequence and then use dvdsp to author, but if you've never used dvdsp it's a big program to get your head round.
    The export can be done in two ways;
    1. Export from fcp using 'export using compressor'.
    2. Export a QT ref/self-contained movie and import that into compressor.
    3. Export a QT movie and import it direct into DVDSP.
    The second option will take longer initially (if you use the self-contained option) but will then allow compressor to work in the background, the first option will tie up fcp for the duration of the encode.
    Once in compressor use one of the 16:9 dvd presets, depending on the duration of the movie and the quality you want. Don't try to adjust the settings. If your movie is 31 mins just use the shortest option (i think it's 60min) and make sure you select the m2v video and ac3 audio options. If you just select the mpeg 2 video you'll only get video, as you've discovered.
    Open dvdsp and create your opening menu and a video track, import the movie file, add it to the video track, and then add the audio to the track as well. Then add any chapter submenus you may want.

  • Missing audio after export. Please help!

    So I made a video for myself and friends on iMovie and included some music that I legally purchased. This video is entirely non-commercial so I didn't see an issue with using some music for it.
    when I export from iMovie, I get the video with no sound and then after the video ends I get the audio with no video. Can anyone explain to me what in the world is going on? First I can see the entire video with no audio, then all I see is white and the audio from the video pops up.
    Last problem is that all the music is missing from iTunes. I can hear all the other audio, but the music I imported from iTunes is missing. It's just the regular audio I imported from the video camera with the clips. Can someone please help me out?
    THANKS!

    hi Sue,
    In my timeline I had the music across both audio bars. Once I reimported the audio, it was all on the third timeline bar. It was colored orange. The audio files do not overlap at all however. So the top bar is filled with the video tracks. The second bar is empty. The third bar has the audio files. They are one after another, seperated by a second or two of silence. There is audio playing on some of the clips of video, but on most of the clips I have muted so that the music should be all you hear. I actually muted the clips themselves, and not the entire bar.
    All the boxes on the far right are checked. I do not have a camera attached. I do have an external hard drive attached via firewire. I have over 80 individual clips in the video. I have 512 Megs of RAM and a 1.25 Ghz processor on my lampstand iMac G4. The file is about 9 minutes long.
    when I export it to quicktime all the video shows up, without any errors except for the fact that it is completely silent. At the end of the video, I get a white screen and the audio from the video clips starts playing, in order, as though I extracted the audio from the entire video and placed it at the end for no reason. None of the music plays. The files that were muted appear to be staying muted, but the ones that have sound are playing. I followed the instructions above about burning a CD, importing the audio files from the CD and then exporting the video to avoid copy protection issues.
    Under my advanced options in the Preferences window I unchecked "extract audio in paste over" and "filter audio from camera" after the first two times this happened to me. the problem continued after I unchecked those.
    I think I've given you as much info as you might need. If there are any other questions please ask and I'll try to get the info for you. Thank you VERY much for your time and help.

Maybe you are looking for