No authorization for this transaction with movement type 601
Dear All,
This is chandra i am getting this error in delivery level " No authorization for this transaction with movement type 601. If give the authorization for SAP ALL its working fine. If give the authorization for SAP SD T.Codes i am getting this error. Plz help me.
Thanks and regards
Chandra
Dear Chandra,
Check with -
T. Code: OMJJ
Select Movement Type: 601 and Double-Click: "Allowed Transaction" (From Left-hand side) .
Check whether the Transaction is allowed for Movement Type 601 or not
Note: if Transaction is not listed (i.e. not allowed) and you wanna allow this Transaction with Movement type 601, then -
Up-there, Tab: New Entry. Click on it.
Maintain entry as:
MovTy: 601
TCode: As reqd.
and Save.
Best Regards,
Amit
Similar Messages
-
No authorization for this transaction with movement type
Hi gurus,
My sd consultant is authorized to execute VLO2N Tcode. But it is giving the error as follows
"No authorization for this transaction(vlo2n) with movement type 643" ...
When i try to do the same thing through BASIS ,it gives no error..
Thanks in Advance,
Vaibhav Gore.Hi Vaibhav,
T. Code PFCG --> Give particular Role Name then click Change Button -->
Then Click Autherization Button --> then Click Change Autherisation(pencil)
Go and Click or Drill down the Material Management : Inventry Management
1.This is --> Goods Movement : Storage Location Type :
Click --> Movement type (Inventry Management) Press F4 --> u can choose ur valid type
Like --> 623 GI iss:cust.ret.pack
Regards
kesav -
No authorization for this transaction with mvt type 101
Has anyone seen this error:
RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120
RFC BAPI Wrapper call:You have no authorization for this transaction with mvt. type 101
RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120
The strange thing is that when I assign user with a different Personnel Number and it works just fine. But when I switched back to his Personnel Number, then I get above error.
Even though I don't get any order list but I got all notifications and technical objects.
Also, this user has same roles with everyone else. While everyone is working fine this user is the only one that getting the error and no order download to PDA.
Regards,
Dai LyHi,
please run ther getlist and getdetail handler in the backend directly for that user - most likely you will get a better failure message there.
Nevertheless - what Application yre you using? Is it MAM? If yes, check the SPRO setup for this particular user,
Regards,
Oliver -
You have no authorization for this transaction in plant: M7120
Hi guys.
I am getting the error message(M7120) "You have no authorization for this transaction in plant XXXX" when performing 101 movement for production order using MIGO.
/nsu53 doesn't return any object. Why?Hello Arun,
It is a standard message. SU53 should show the exact authorization object which has been blocked. Or you can also try to check this with T code ST01.
Refer the below threads & seek help from your basis consultant to get this resolved.
Authorisation missing
authorization error in mbbs transaction | SCN
Regards
Mangesh S -
Post a good issue against an outbound delivery with movement type 601 K
Hello,
according to my business scenario I need to manage the stock of different vendors into the client's location (plant) at storage location level and I need to post the good issue against an outbound delivery to decrease the stock level.
Since the owner of the goods isn't my client the item is managed only at quantity level (not value) so I'm not interesed in the accounting document.
To do it I'm using the functionality related to the vendor consignment stock but I'm not able to post the good issue against an outbound delivery using the movemement type 601 and the special stock indicator equal to K.
In particular I've tried in two different ways:
- setup the consignment stock indicator (= K) into the sales item category, but when I post the goods issue the system is not able to find out the right vendor
- to create a stock determination rule instead of the setting previous described, but the system display an error message (Fld selectn for mvmt type 601 / acct L534200770 differs for Cost center (010) ) even if the accouting is not relevant in my scenario
Can you suggest me how the system has to be setup in order to cover my requirements?
Thanks in advance,
AlessandroHi,
Please clarrify which material type you are using in this scenario? I suggest you to use material type UNBW (no value updation will be there) and create a material master. Use special stock indicator K. Proceed with 601K to do GI. Hope it works. Thanking you. -
Posting of Goods Issue for a Delivery (Different movement types)
Hello SD Experts,
We have this process wherein we use Deliveries w/o reference. There's a customization in place for this process, the movement type is determined through the item category of the material.
Given this scenario, my question is if it is possible to process the goods issue of a delivery with multiple item which require different movement types (diffrent items and item categories thus it have different movement types)?
Thank you for your kind consideration.Hello,
Yes, you can.
As you know LO is std delv doc for delv w/o reference.
And I cat determination for that LO delv doc are
Delv Type __ I Cat Group __ Usage __ High I Cat __ Def I Cat __ Man I Cat __ Man I Cat
LO _____________________TEXT ______________ DLTX
LO ________DIEN____________________________ DLX _______DLX
LO ________LEER___________________________ DLN
LO ________LEER________________DLNG_______DLNZ
LO ________LEIS_____________________________DLX_______DLX
LO________ NLAG____________________________ DLX
LO________NORM____________________________DLN
LO________NORM________CHSP_______________DLN
LO________NORM________CHSP____KLN________KLN
LO________NORM________CHSP____TANN______TANN
LO________NORM________PACK_______________DLN________DLX________DLP
LO________VERP____________________________DLN
LO________VERP_________PACK_______________HUPM______DLN
LO ________VOLL____________________________ DLNG
LO ________ WERT____________________________ DLW
Corresponding maintain movement type in Schedule line cat (Tcode VOV6) & determination that in TCode VOV5.
If you want diff movement type then create your own 'Z' Sch line cat with you desired Movement type (Tcode VOV6) and determine the Sch line Cat accordingly in TCoDe VOV5.
Thanks & Regards
JP -
Amount on Goods receipt for return orders is wrong with movement type 653
Hi All, I am sorry if it is a simple question because i am an abap'er.
My requirement is to create return sales order (with ref.to Billing document) and deliver and PGI for the return orders. This should go to sales order stock. Accounting document should be generated for material document and the amount should be picked up from condition type (if man.cond. type exist) else from material master.
1) Created a sales order (Bought in item cat) - Create PO (Non stock) - Receive goods (MIGO) - Create Delivery (VL01N) - PGI (Movement type 601 and special stock indic. 'E') - Create billing document (F2 type from VF01)
So far it is good. The account document is created (PGI - cost of goods) with correct amount as desired
The next scenario is if the material is returned? This is where we are having issues
Created sales order with ref.to billing doc. (S.O: RE. Item.Cat. Return Bought in (YRBI)... this is pretty much same as bought in except few things which are YRBI - Delivered - PGI (Goods returns. unrestricted) Movement type 653 - Problem comes here.
a) If i put special stock indic 'E' in 'Return bought in item.cat - There is no accounting document generated for 653 movement type.
b) if i maintain space instead of 'E' in return bought in item.cat - there is an accounting document but the manual cost is not copied to accounting document and it is picking up from material master which we dont want and The stock is not showing up in sales order.
I did my research (forum, OSS, google, and in help.sap.com) before posting here but no help.
I have checked account assignment categories for 'A' - (some post explained this) I tried changing values but no help.
I even tried changing the schedule line category to DN but no help.
I dont know what i forgot to change or check but i have tried everything what i know and from help from different sources ... still couldnt get it.
Original requirement is to make the return stock as sales order stock and this can also be returned to vendor. If there is a manual cost in return sales order, the PGI accounting document should be created with this condition value else from material master.
My pricing settings are good.
It would be really helpful if any one guide me to configure the process or atleast if anyone tells me what am i missing... .Have a look at any of the following notes:-
1) Note 171989 - Sales-order-related productn: Custmr exit COPCP002
2) Note 520000 - FAQ: Valuated special stocks
3) Note 557582 - User exit and valuated sales order stock
4) Note 580228 - Incorrect prices for materials procured externally
5) Note 983193 - Docu:Externally procurd material in valtd sales order stock
thanks
G. Lakshmipathi -
Find Material Document with Movement type 103 for material document 105
Hi experts,
In PO History, I have three line items with movement type 103 (Blocked Stock) and one with movement type 105 (From blocked stock to unrestricted stock). I would like to know the material document with movement type 105 document that has the movement type 103.
Regards,
AbdullahHi,
you can get the material documents (mblnr) for the movement type(bwart) in table AUFK.
But i think you need to pass some other data along with bwart like matnr or aufnr for getting the correct mblnr.
Regards,
Chaitanya -
BAPI for Goods Movement with Movement Type 701
Hi,
I want to post a goods movement with movement type 701.
Is there any BAPI I can take?
I already tried the movement with 'BAPI_GOODSMVT_CREATE' but i got an error message that the movement ist not possible.
Can anyone help me?
Regards, Alexwhy dont you tell what message was issued?
-
Transfer posting with Mov Type 311E in MIGO with reference to SC-PO
Hi,
I am working with MTO scenario.
I want to carry out transfer posting of material with movement type 311E against subcontracting Purchase Order which is sale order specific.
However, system does not allow me to do the same. whenever transfer posting, PO & movement type is selected in transaction MIGO, item details entry tabs are displayed blank.
Below steps are being follow:
Scenario is MTO ( special stock subcontracting)
1. Subcontracting PO no. 4500000147 against Sale Order no 61 created.
2. RM code - 61, available stock 100 TO & batch no.0000000127
3. Transfer material to vendor for processing through MIGO ( since it is a special sales order stock, transferring happens from SL 0001- Main Stores to SL VLSC -Virtual storage location) using movement type 311 E
5. Item Data details tabs are blank.---This is the issue / error.
Note: I am restricted to post transfer posting through MIGO-Transfer Posting (will not use MB1B) due to some enhancement of MIGO and interfaces with legacy system.
Please have a look on attachment for SAP screen issue.
Regards
Mohit JaiswalHi Mohit ,
please check below link , you need to perform steps as given
http://help.sap.com/saphelp_470/helpdata/en/4d/2b90b043ad11d189410000e829fbbd/content.htm
also see the sales order subcontracting using the business addon
http://help.sap.com/erp2005_ehp_04/helpdata/en/c7/2587b8dad94c52854ccd28015dceb0/frameset.htm -
RFC error "No authorization to send IDOCs with message type ..."
Hi all,
I have now tried just about everything I could think of, applied all the notes mentioned on this forum but still no luck. Can anyone please help ...
I have got a file to idoc scenario, the status in the sxmb_moni is successful, but the outbound processing logs an error. When I go to transaction SM58 I get an error for the user XIAFUSER with the message "No authorization to send IDOCs with message type WPUUMS".
I have tried giving this user SA_ALL access and still got the same error thus concluding that this is not an authorisation error.
Any suggestions?
Regards,
LieselHi Liesel,
The RFC destination that you have put in IDoc communication channel must be present in your SAP XI system, transaction SM59 also.
Please check if the user id/Password that you have given has all the authorization.
Also check the User ID and passwrord in SM59 in R3 and see if a Remote Login is possible.
There is also some configuration by which the clients are allowed / blocked from receiving Idocs from XI. Basis guys can do it for you. Please approach your basis consultant. Hopefully that helps..
Regards,
Abhy Thomas -
Error : No authorization to send IDocs with message type MATMAS
Hi All,
My scenario is FILE-XI-IDOC.
I am getting chequered flag in SXMB_MONI,but in that under outbound status I am getting red flag.
When I check in SM58 I am getting message as "No authorization to send IDocs with message type MATMAS".
Do I need to give any authorizations on XI side or on R/3 side?
If so, what is the authorization required?
I could not find the note :837595.<i>You use the IDoc Adapter in the Exchange Infrastructure and you try to use the IDocs to receive or send data. For these IDocs, an attempt is made to load the IDoc metadata from an R/3 reference system with an SAP NetWeaver Release lower than 6.20.
This occurs either at runtime, whereby the relevant messages run into 'System error' status, or when you use transaction IDX2 during manual loading of the metadata. In this case, the reference ystem is called by RFC and the logon user of the RFC destination does not have the necessary authorizations for determining the metadata.
Solution
In transaction PFCG, extend the role of the logon user by adding the following authorizations:
Authorization object S_RFC
Field name RFC_TYPE value FUGR
Field name RFC_NAME value EDIMEXT, SDTX
Field name ACTVT value 16
Authorization object S_IDOCDEFT
Field name ACTVT value 03
Field name EDI_CIM value ' '
Field name EDI_DOC value TXTRAW01
Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
Field name ACTVT value 03
Field name DICBERCLS value</i>
from the note mentioned above.
Regards
Bhavesh -
Error in Goods issue with movement type 541
Dear Users,
I have created a Sub contracting PO. After that when i m issuing the goods to vendor with movement type 541, its giving the following error: Movement type 541 is not planned for this operation.
Please help me outYou can provide material to vendor either using Transaction codes :
1. MIGO - Transfer Posting - Other - Movement type 541
2. MB1B - Movement type 541 or
3. ME2O - Mention the vendor & execute
S. Kumar -
Dear Friends,
However while trying to do this transaction with MB01 and mvmt type 161 Returs good to vendors
while giving input vendor name, material, Qty Unit Storage Location, Plant, Mvmt Type 161 then error showing enter Purchase Group. but the field not showing any where in the screen. even i tried through PO also. same error showing.
where i need to input Purchase Org
please advice or methods to solve this issue.
thanks & Regards,
Have a nice Day!!!!
Rajesh GHi Rajesh_k1975
Actually in Movement type 161 option to create the auto PO while creating the MB01 with vendor return.
In this case of auto PO. if you have not maintain the Info record then for PO creation it will not allow to post the doc.
so, check if you have info record .
if not , please create.
after document created , you can view the PO number created through MB01 in background from MB03.
SAM -
Enhance purchasing datasource with movement type
Hi
I need to enhance purchasing data source with movement type ( BWART). Can you please suggest me if any standard datasource ( Purchasing ) having this info. I can see that field is present in EKBE table, but how to link EKPO and EKBE table as there are many keys in EKBE table.
Regards
KamalHi
you need to check the requirement first prior to addressing this issue.
Purchasing Document will not have the Movement type field. It exists in the Inventory transaction.
Table EKBE is the History table for Purchase documents. IF you check this table carefully you will see that the Material documents against every Purchase document are stored in this table. The Movement type field in the EKBE table refers to the Material document.
So if you try to link BKART with Purchasing document # then you may have one or more than one BKART number against one Purchasing document.
If yoou need the Purchasing document with BKART then it is essential to consider all the keys in EKBE.
Cheers
Umesh
Maybe you are looking for
-
How can I erase my hard drive if my DVD is broken?
Hi all, I have a G4 with OS 10.4.11 that I would like to now retire. The DVD drive is "stuffed up" so I cannot erase my files using the Tiger install disc. I went to applications/utilities/disk utility, selected the Macintosh HD, selected the Erase t
-
Commitment Value after partial GR
Hi All, Anybody have idea for below given scenario. Query on Commitment cost Eg: PO issued with cost of 1M USD. Based on current rate of 1.3, Commitment shows in local currency 1.3M SGD 6 months later, 80% of PO can be GR. 80% *
-
Help! my iMovie doesn't open anymore...what happened?
I have run into a few problems with trying to become more independent in editing my own original recorded materials. Starting here at the beginning of my struggles.....*my iMovie will not open.* when i go into Finder to find it and then click on it i
-
ListenerAdmin not working in WebLogic
I seem to be having the same issue that folks are having within the Glassfish server. I've configured the APEX listener on WebLogic 11g (10.3.5). Followed the instructions to create the adminlistener and managerlistener and their respective groups: A
-
This installer does not support installation on a 64-Bit Windows operating system
This installer does not support installation on a 64-Bit Windows operating system