No Bluetooh Driver after upgrade to Win 8.1- HP Pavilion TS 11 Notebook PC

Hello,
I need help.
When I bought this laptop it came with Win 8.0 and everything worked fine. But after the upgrade to win 8.1, the bluetooh crashed, and since there its not recognized.
I tried everythig even try to install the drive to win 8.0 but did not work ...
What should I do?
thank you

Thanks paulovpinto. I do not see Bluetooth drivers available for Windows 8.1 for your computer.
HP Pavilion TouchSmart 11-e000sp Notebook PC Drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5396...
This thread has a possible solution, albeit complicated if you are using Ralink Bluetooth in Windows 8.1. See mpw101's post here.
Re: HP Support Assistant - Ralink August 2013 Update:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Support-Asistant-Ralink-...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Missing drivers after upgrade to Win 7 in HP pavilion dv9500

I upgraded my laptop to Windows 7 32 bit and everything works except from 2 base system devices listed in device manager that need work. What should I do?

I have the same problem with you but I found out once you upgrade your pc to windows 7 there's always an issue. You'll try calling HP Tech, and they will refer you to PC techinician nearest to you because they said there's something wrong with you HD blah blah or your sound card is gone...need a new one. Well I nearly believe them until I stumbled what's causing my problem and I fixed it myself. Now I have no problem with my sounds missing or audio device missing. My Laptop has voice now non-stop.
The problem that cause wasn't about the hard drive or the sound card but it is about the CONFIGURATION OF YOUR PARENTAL ACCOUNT CONTROL IN WHERE YOUR AUDIO SOUNDS HAS TO BE USE. AFTER I SET MINE TO WHAT IS SUPPOSED TO BE THE RIGHT OPTION, SINCE THEN I HAVE NO MORE PROBLEMS ABOUT MY SOUNDS OR AUDIO DEVICE MISSING OR NO AUDIO DEVICE INSTALLED.
SOLUTION; Click Start/Control Panel/User Accounts and Family Satefy. Click Parental Control. In the box at the LEFT SIDE you will see GAMING RATING SYSTEMS. Click Gaming Rating System and click administrator box Yes(if come out). In the box you will see some LOGO ICONS for you to choose in which gaming rating you want to use your sounds. This is where you must configure your computer what rating is compatible to use to run sounds in your Windows 7 from Windows Vista or Xp.
The previous option in my Laptop was in the 3rd option ESRB. Then I move it to the 2nd option that the LOGO is written in Chinese Language( Computer Software Rating Regulation). I click OK and then Restart. Since then I have no missing audio or missing sounds problems.
I hope that helps.

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.

System recovery fails after upgrade to Win 8.1 on Satellite L75D-A7283

My elderly uncle forgot the password to his Win 8 user account sometime after upgrading to Win 8.1. He was the administrator, we haven't been able to get Microsoft to reset the account, so I thought to roll back the computer to its factory installation of Win 8.
However, when I try to do that, I get as far as the Reset your PC screen and find that the only target OS is Win 8.1, not the original Win 8. Ok, I accept that. But after choosing to restore Win 8.1, it says "Unable to reset your PC. A required drive partition is missing."
I have examined the disk by removing it and attaching it to another computer and find that both the original Win 8 recovery partition and the new Win 8.1 GPT recovery partition are both there. They just don't seem to be accessible.
It seems that the Win 8.1 upgrade has made the original factory recovery partition inaccessible, which is not particularly helpful. We have no recovery disks to work from, so I think my only recourse is to try to get a Win 8 factory recovery disk from Toshiba, but I wondered if anyone else has a suggestion? Thanks.

Satellite L75D-A7283
It's my understanding the upgrade does not modify any other partitions while upgrading Windows itself. Seems likely something else is wrong.
If you did not create recovery media before and cannot do so now, then obtain it from Toshiba. Scroll down to Get Recovery Media here.
All the information in the section Recovering the Internal Storage Drive, which begins on p. 53 of the User's Guide, should still be applicable.
Satellite/Satellite Pro L40/L50/L70/S40/S50/S70 - A Series User’s Guide
-Jerry

HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate

HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate
what can I do?

Uninstall the current audio driver and install it again.
other option is trying driver from microsoft update.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

After upgrade to Win 8, the key's has changed

After upgrade to Win 8, the key's has changed, for example, when i am trying type @ but the key has changed as ". so please help me to rectify the problem.

Hi,
What was the keyboard language BEFORE and what it is NOW ? Did you use SAME KB language for both Windows 7 and Windows 8 ? When click to the KB (bottom right corner) what do you see ? This is mine:
Please use instructions from the following link to fix:
http://windows.microsoft.com/en-AU/windows-vista/Change-your-keyboard-layout
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

Icloud stopped after upgrading to win 8

icloud stopped working after upgrading to win 8.
Says "map cannot be found".
Any suggestions? Or will it simply not work with Win 8?

Solved.
Needed upgrade to 2.1

Lost Deskjet 5740 printer driver after upgrade.

Lost Deskjet 5740 printer driver after upgrade. HP site has a download but it does not appear in the driver list after downloading it. Ideas?

Okay, as of last night, both the printers are working fine. I uninstalled the 5740 and then tried several different rearrangements of the two printers. First I tried hooking the 5150 to the AEBS and it printed fine. Then I tried hooking the 5740 to the AE and it printed fine. Finally, I tried my original configuration with the 5740 hooked to the AEBS and it printed fine! Very frustrating.... I'm not sure if Apple sent an update I downloaded in the meantime that fixed the problem or what. I can't think of any other possible explanation.
So to recap, I can vouch that I have an HP Deskjet 5740 connected to an AEBS and an HP Deskjet 5150 connected to an AE, all set up on a WDS (wireless distribution system) with Leopard and everything works as expected. Hopefully your printer magically started working again as well Bibycat.

Playlists Missing After Install New Hard Drive and Upgrade to Win 7

My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.

YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH!

After upgrading from win 7 - win 8, do I really need the win 7 recovery partition?

Hello.
I'm a happy camper after upgrading my HP Spectre XT from win 7 to win 8 (Win 8 upgrade offer). The 128GB SSD disks just makes everything so smooth and fast.
However I am abit annoyed with the Win 7 recovery partition that still uses 20 GB of my total 128GB space.
I have tried searching the forums, as well as the www for any good answers, but I end up more confused.
So I am asking the community some questions that interests me, and hopefully you can provide me with some meaningsful answers
1. Can I now delete my win 7 recovery partition, and if so what is the most effiecient and safe way to do it?
2. Is there a a good way to make sure that if (heaven forbid) something would happen, I still would be able to recover my notebook preferably to win 8, and not the preinstalled OEM win 7?
3. Of course the Spectre XT has no optical drive, so if its doable I might need to make an win 8 recovery partition in the end. Is it possible?

You can use Windows builtin Disk Management to delete the partition, or EaseUS software. Both procedures are outlined at EaseUS site:
http://www.partition-tool.com/resource/windows-8-partition-manager/delete-windows-8-partition.htm
As for a Recovery option after deleting, look at System Imaging which is builtin Windows 8 also.You need an external USB hdd for this.
http://www.eightforums.com/tutorials/8956-system-image-create-windows-8-a.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Printing Issues After Upgrading to Win 8.1

Can someone direct me or help me out please. I upgraded to Windows 8.1 on Saturday from Windows 8. I have a Lexmark 7600 Series that used to print, now it doesnt. I have tried everything that I can think of which includes removing and re-installing the printer,making sure the software/drivers is updated. I keep getting the following message every time I do a test page ..
communication not available:
ensure printer is powered on, disconnect and reconnect the printer power cable, USB cable(which is how I print), check firewall, ensure the convenience port is not in use and restart the computer.
I have tried all of the above. I research Wins 8.1 compatibilty with this printer and nothing is listed whether it is or not. I never had this issue but I have notice on the website that alot of people are having issues with this Windows 8.1 upgrade and printers.
I appreciate any feedback, help, links, anything that can help me fix this probblem before buying another printer which is not necessary since I know it prints on other computers in my house.
Thanks
Maribel

Hey @Maribel09 ,
Welcome to the HP Forums!
I understand you're having issues with your Lexmark 7600 printer after upgrading to Windows 8.1.
You may need a driver update for the newer version of Windows. I would suggest contacting Lexmark support as they would be the most qualified people to help you with this problem. You can contact Lexmark support here: Lexmark - Contact Us.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Brightness key not working after upgrading to win 10

MY laptop has been upgraded to win 10, but after the update brightness key is not working.

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

(s300) Keyboard and touchpad problem after upgrading to win 8.1

Hi,
I just upgraded to win 8.1 (from win 8) and I have to problems that are pretty annoying.
The first problem is with the keyboard (I think it has something to do with keyboard layout):
When I type quote mark ( " or ' ) it doesn't display it. Only when I press another key it shows.
The second problem is with the thouchpad. Before I upgraded I could "click the right mouse key" by touching the touchpad with two fingers. After the upgrade it doesn't work anymore. I tried to download the newest driver from the drivers page, but it didn't fix it.
Is there any solution?
Thanks!

Hi FishingGuy58,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some printing issues since you upgraded to Windows 8.1. So I can better assist you, Please respond with the Printer Model number.
How Do I Find My Model Number?
Once I have the information I can better research the issue and with any luck, come up with a resolution to this issue.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

BIAS SoundSaver Input Level Not Working after upgrade from Win 8 to 8.1

Have been using BIAS SoundSaver for INport software to digitize music LPs and cassette tapes to load on MP3 player. Worked fine with Windows 8. However, now that I have upgraded to Win 8.1, I can get sound of LPs and cassette tapes but the Input Level that controls the recording level on the software no longer functions. My computer is an HP ENVY Phoenix h9-1355 Desktop Computer with IDT High Definition Audio CODEC. I am wondering if the problem may be with the audio drivers installed on the computer.
This question was solved.
View Solution.

Hi @Alkay
I see that you are having sound issues after your 8.1 upgrade. Did you update to the 8.1 versions of the drivers?
They may be found here: HP ENVY Phoenix h9-1355 Desktop PC Drivers
Is it only the one application seeing this problem?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

No Bluetooh Driver after upgrade to Win 8.1- HP Pavilion TS 11 Notebook PC

Similar Messages

Maybe you are looking for