No bootable device --- insert boot drive and press any key?

A while back I tried installing windows 7 on the iMac which is now running on Mountain Lion. Installing windows wouldn't work. I tried every possible option and tried so many times to get it to work but it wouldn't. Now I have another issue. I went to disk utility and have erased the partition that was created. Except everytime that I boot up my iMac, it tells me
No bootable device --- insert boot drive and press any key?
I have no idea how to get rid of that. I have to always hold down option so that I can choose my apple partition. I was reading online and people say that there is a problem with the Hard Drive, that Master Boot Record is currupt. How do I fix that? Would I need a new harddrive? I dont care if I have to loose all my files, except I dont want to beleive that the only way to fix it is to reinstall Mountain Lion, because in the process of trying to install Windows 7 I reinstalled Mountain Lion like 3 times... So doubt that reinstalling Mountain Lion would fix this issue. Is something wrong with my Hard Drive and is there a away to fix it?

Do a PRAM reset, open System Preferences > Startup Disk and select Macintosh HD

Similar Messages

  • Attempting to install Windows 7 from USB drive keep receiving "No Bootable device -- insert boot disk and press any key" usb drive with windows 7 iso is inserted

    As the topic says, i am trying to install windows from a usb drive, when i click install windows and the computer reboots to install a black screen comes up with "no bootable device -- insert boot disk and press any key" the USB drive is inserted and pressing any key does nothing. Help?

    You need to follow these guides to install from USB drive
    http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed -100-working-guide/
    good luck

  • Error message on screen: No bootable device -- insert boot disk and press any key comes on

    Error message comes on screen: No bootable device -- insert boot disk and press any key.  What do I do?

    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    If the above is not possible or failes, then replace your hard drive.

  • Mac Mini - "No bootable device - insert boot disk and press any key"

    When trying to install windows 8.1 from dvd on late 2012 Mac mini.
    When the machine reboots after creating the ms-dos partition. I receive the foolwing error
    No bootable device -- insert boot disk and press any key
    The only drive I have connected is the Superdrive
    Can someone please help me

    Welcome to Apple Support Communities
    Turn off your Mac by holding down the Power button. Then, turn it on and hold the Option (Alt) key until you see all bootable devices in the screen, so choose your Windows 8 disc and follow the steps to install Windows 8.1 > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

  • Help with "No bootable Device -- Insert boot disk and press any key" problem

    Alright, I am on an Early 2011 17inch macbook pro.  I have removed the superdrive to install a secondary disk drive for mass storage, then replaced the original one with an SSD blah blah blah.  I do everything from the books, run bootcamp, make my USB windows 7 bootable in Bootcamp, go through everything and allocate 65gb towards windows.  I have tried 4 different USB sticks and 3 different ISOs.  Every time I try it, I get the same "No bootable device -- insert boot disk and press any key".  I then have to hold down the power button, then restart, hold down option/alt key, and boot regularly into mac.  I also read that holding option/alt whilst starting the macbook pro will show the windows USB stick, well it never appears.  I dont know what I need to do, what I am doing wrong, but nothing is working.  I guess the last thing I have to try is buying a superdrive and burning ISO to disc then try that.  But I dont want to go out and spend more money.  Other people have gotten it to work just fine from USB, I dont know what I must do or what I am doing wrong...
    Open to suggestions and in desperate need of help.  Anything is appreciated.
    Thanks!

    Don't bump
    get a new usb2 only flash drive and try the solution posted by kunu here and report back
    https://discussions.apple.com/thread/5105056?tstart=0
    How to install Bootcamp on a 2009 Macbook Pro that does not have a disc drive

  • Bootcamp - No bootable device -- insert boot disk and press any key help plz

    Hello there!
    I recently upgraded my imac mid 2010 system with a SSD hard-drive. The old "main" drive went to the place of super-drive and after reinstalling OS X into the new drive and wiping the old drive a very interesting problem happened. I started trying to install windows 7 via bootcamp. I did everything what the bootcamp assistant says and after the imac restarts itself it just says No bootable device -- insert boot disk and press any key. Firstly I thought that maybe something is wrong with the installation disk (i have an external super-drive connected to the imac). After restarting the imac once again i held down the option button and arrived to the screen, where it shows the avlaible boot options (different disks). Now, what I saw, was funny. The bootcamp assistant had'nt created the bootcamp drive at all. Atleast it did not show it. After doing this two-three times the result was the same. My next idea was that maybe, there is an issue with the concrete SSD model I am using. So I went back to OS X and opened the bootcamp assistant and restored the state of the OS X SSD drive. Next I did an bootcamp partition onto the old drive I have installed. But the result is still the same. Now my head is empty of ideas.
    Has anybody had a similar problem and can you please give me tutorial what I did wrong or what to try next?
    Thanks.
    Indrek.

    Hi Michael!
    Yep, I did get this running. Not in a normal way (meaning the easy way). What I did, is that I just created the BOOTCAMP partition in OS X. Just let it format and create the partition where you would install BOOTCAMP.
    After that I discovered that via a ISO program (WinClone) you can directly restore a previously created OS X boot image to your current computer. So, I installed a blank Windows 7 to my macbook pro, didint install any drivers and just let it work up then. Then I went back to os X (in macbook pro) and made a bootimage for the BOOTCAMP partition. After that I saved it to my external harddrive and wired it to my iMac. In iMac I just downloaded the same boot-image program and restored the bootimage that I made in Macbook Pro to iMac. After that I made an restart and the bootcamp section with windows worked well with my iMac. Install the bootcamp soft and you can do everything and everything works. FYI, you get the windows working via those steps, BUT if you either delete or do anything to make your bootcamp partition unworkable then you will have to repeat those steps again. But it´s fast non-the-less, so it shouldn´t be a problem for you.
    If you didin´t understand anything or something doesen´t add up, send me a letter or a notification.
    Hope this helps.
    Indrek.

  • Can't install Windows "No bootable device -- insert boot disk and press any key"

    I'm running OSX 10.9.3 on my Macbook Pro 13-inch, Early 2011 and trying to install Windows 7 via Boot Camp Assistant and I'm using a flash drive loaded with bootable copy of Windows 7 Ultimate (legal, if that makes any difference).
    Here's what I've been doing:
    1. Plug in my flash drive, then on Boot Camp Assistant, click "Install Windows 7 or later version"
    2. Set my Windows partition to 45GB and continue... so far so good...
    Then the problem:
    3. My computer restarts, goes to a black screen with the message "No bootable device -- insert boot disk and press any key"
    The flash drive is still plugged in but is it not being recognized or something? Nothing happens when I press any keys.
    I can use OSX just fine by holding down "Alt/Option" on restart, but in my case what can I do to continue further with the Windows install? It's basically an empty partition as of now. Any help appreciated!

    Ive been having this problem and have been trying to figure out how to fix it for almost a week now.  I have a 2011 17" MBP with the superdrive removed.  Ive tried many different methods and many different methods to no avail.  If anyone can help, please do!
    xxzy, have you tried the KUNU method?
    you can find it here:
    Bootcamp without Optical disc drive
    Scroll down to Kunu's post about his solution and see if it works for you.

  • Boot camp: No bootable device -- insert boot disk and press any key screen

    Hello there!
    I recently upgraded my imac mid 2010 system with a SSD hard-drive. The old "main" drive went to the place of super-drive and after reinstalling OS X into the new drive and wiping the old drive a very interesting problem happened. I started trying to install windows 7 via bootcamp. I did everything what the bootcamp assistant says and after the imac restarts itself it just says No bootable device -- insert boot disk and press any key. Firstly I thought that maybe something is wrong with the installation disk (i have an external super-drive connected to the imac). After restarting the imac once again i held down the option button and arrived to the screen, where it shows the avlaible boot options (different disks). Now, what I saw, was funny. The bootcamp assistant had'nt created the bootcamp drive at all. Atleast it did not show it. After doing this two-three times the result was the same. My next idea was that maybe, there is an issue with the concrete SSD model I am using. So I went back to OS X and opened the bootcamp assistant and restored the state of the OS X SSD drive. Next I did an bootcamp partition onto the old drive I have installed. But the result is still the same. Now my head is empty of ideas.
    Has anybody had a similar problem and can you please give me tutorial what I did wrong or what to try next?
    Thanks.
    Indrek.

    Indrek,
    There is a Boot Camp forum, I'd suggest posting there because most of the Boot Camp and Windows gurus are there.
    Good luck.

  • "No bootable device --- insert boot disk and press any key" after setting up Bootcamp

    Hi guys,
    I am trying to install Windows 7 via Bootcamp but after setting up Bootcamp and restarting the computer I get the error message "No bootable device --- insert boot disk and press any key".
    I use an iMac with a DIY Fusion Drive consisting of a 120 GB SSD and a 1 TB HDD.
    Since Bootcamp can only be installed on the HDD I believe disk1 is the interesting one. Here is the output of sudo gpt -r -vv show disk1:
    gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
    gpt show: disk1: Suspicious MBR at sector 0
    gpt show: disk1: Pri GPT at sector 1
    gpt show: disk1: Sec GPT at sector 1953525167
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1709658208      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      1710067848     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1711337384          88        
      1711337472   242186240      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1953523712        1423        
      1953525135          32         Sec GPT table
      1953525167           1         Sec GPT header
    And the output of sudo fdisk /dev/disk1:
    Disk: /dev/disk1
    geometry: 121601/255/63 [1953525168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE    0   0   2 -   25 127  14 [         1 -     409639] <Unknown ID>
    2: AF   25 127  15 - 1023 254  63 [    409640 - 1709658208] HFS+       
    *3: 07 1023 254  63 - 1023 254  63 [1711337472 -  242186240] HPFS/QNX/AUX
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
    Here is also the list of my disks:
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *120.0 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         119.7 GB   disk0s2
       3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:          Apple_CoreStorage                         875.3 GB   disk1s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
       4:       Microsoft Basic Data BOOTCAMP                124.0 GB   disk1s4
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS FusionDrive            *975.5 GB   disk2
                                     Logical Volume on disk0s2, disk1s2
                                     FFA13FBC-2001-40B7-8BBB-BE6EECF8AC11
                                     Unencrypted Fusion Drive
    /dev/disk3
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                            GRMCPRXFRER_DE_DVD     *3.2 GB     disk3
    I have gdisk installed and am ready to mess around. Any help would be greatly appreciated!

    So, when I started my iMac yesterday morning it couldn't boot into OS X anymore either. Several hours of restoring later I am back to square one. I tried installing Windows 7 via Bootcamp again but got the same error message. This time I noticed though that Bootcamp asked me to remove the bootable option from the USB drive with the support drivers in order to install from DVD. Does that ring any bells? I am building another USB drive right now, hoping it would ask me again but this I will decline and try to boot from it.
    When you restored, was a Time Machine restore used? TM does not backup Bootcamp and does an erase of the partition. It may also erase the entire disk (including the Fusion drive) if the specific backup of the volume layout of the disks indicates a pre-Bootcamp layout.
    My MacBook Pro is a 2009 model and also once had a built-in optical drive. I have no idea why it would work on there but not on the iMac.
    You also wrote
    When I plug the external DVD drive in, the boot manager recognizes a "Windows" disc and an "EFI Boot" disc. If I select the "Windows" disc I get a black screen with a blinking dash.
    The blinking dash indicates that it is working, but does not have the requisite drivers to enable the GPU/Mouse/Keyboard on the media being used.
    In the MBP case, did you have two drives installed in the MBP, a Fusion configuration, and then were able to successfully install Bootcamp?
    For example on a Mac mini I have a DIY Fusion drive, but the sequence was done differently. Bootcamp was installed using a USB stick+Windows 7 ISO.
    1. The two disks are not in a CoreStorage set up initially.
    2. The second disk is partitioned (64Gb) and a Bootcamp W7 install completed via USB (this is different HW as compared to IMac, because it has no Optical drive).
    3. After the HDD is partitioned, the first partition and the SSD are then used to create a CoreStorage volume.
    4. Here is the working version and disk layout. (I plan to erase both disks, put W7 on a partition on the SSD, and make the non-Bootcamp+entire HDD in a CoreStorage volume).
    diskutil cs list
    CoreStorage logical volume groups (1 found)
    |
    +-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
        =========================================================
        Name:         Fusion
        Status:       Online
        Size:         1190201270272 B (1.2 TB)
        Free Space:   0 B (0 B)
        |
        +-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
        |   ----------------------------------------------------
        |   Index:    0
        |   Disk:     disk0s2
        |   Status:   Online
        |   Size:     255716540416 B (255.7 GB)
        |
        +-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
        |   ----------------------------------------------------
        |   Index:    1
        |   Disk:     disk1s2
        |   Status:   Online
        |   Size:     934484729856 B (934.5 GB)
        |
        +-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
            Encryption Status:       Unlocked
            Encryption Type:         None
            Conversion Status:       NoConversion
            Conversion Direction:    -none-
            Has Encrypted Extents:   No
            Fully Secure:            No
            Passphrase Required:     No
            |
            +-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
                Disk:                  disk2
                Status:                Online
                Size (Total):          1185508581376 B (1.2 TB)
                Conversion Progress:   -none-
                Revertible:            No
                LV Name:               Fusion HD
                Volume Name:           Fusion HD
                Content Hint:          Apple_HFS
    diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *256.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         255.7 GB   disk0s2
       3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:          Apple_CoreStorage                         934.5 GB   disk1s2
       3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
       4:       Microsoft Basic Data BOOTCAMP                64.9 GB    disk1s4
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Fusion HD              *1.2 TB     disk2

  • No bootable device -- insert boot disk and press any key - problem

    Hi,
    I'm running an early-2008 MacBook (13-inch) that has previously had Windows Vista and Windows 7 installed to it through Bootcamp over the years.
    A few weeks ago I did a fresh reinstall of OS X Lion (10.7.5) and decided to reinstall Windows 7 as well. I deleted all the partitions and started afresh. However, upon trying to reinstall Windows 7 I've become a wee bit stuck.
    Bootcamp works fine at first - it lets me partition the HDD without any issues (the partition is MS-DOS - FAT32), but when it reboots it gives me a message 'No bootable device -- insert boot disk and press any key' against a black screen. I've never seen this message before and it won't let me continue with the installation. I'm able to get back into OS X by pressing the option key upon reboot.
    Any idea what I'm doing wrong? As I said I've used Bootcamp several times in the past on this machine without any problems. The only difference between then and now is that my Superdrive no longer works so I'm using an external DVD drive. However, the error happens regardless of whether it's plugged in.
    Cheers,
    Matt

    jeffjefftyjeff wrote:
    The only difference between then and now is that my Superdrive no longer works so I'm using an external DVD drive. However, the error happens regardless of whether it's plugged in.
    For Macs with built-in Optical drives, it must be functional for a Windows installation/installer to work. You will also need a USB2 flash drive.
    On such Macs, the BCA sets the boot device to be the non-functional Optical drive, which is why you see a No boot device message.

  • No bootable device -- insert boot disk and press any key, over and over again...

    I've seen a lot of discussions about "no bootable device -- insert boot disk and press any key" but the answers in them don't seem to help me at all.
    from the begining...
    i was tryin to instal windows 7 on my 2014 iMac and after bootcamp prepared the iso on a flash drive, the computer restarted in the windows instalation screen and i chose the "BOOTCAMP" partition.
    After thi i got an error with a mesage that the partition wans not in ntfs, and a question if i wanted to format it. As i am recent to OSX but i was a windows user for quite a while i thought, ok there should be no problem about letting windows format this BOOTCAMP partition so i went ahead and did it. after this i stopped the process because at the moment i seem to recal that in the mac osx bootcamp help there was something about making sure to installing windows to the BOOTCAMP partition. So i canceled the process and restarted the iMac.
    Now i get the  "no bootable device -- insert boot disk and press any key" message over and over.
    I've tryed restarting with alt, alt+cmd+p+r, alt+r, etc and allways get the same message.
    Just before tryin to install windows on a secondary partition had the iMac backup to an external drive on my airport express via time machine.
    Questions.
    are there any other ways to boot into OSX again, or after letting windows format the BOOTCAMP partition all is lost?
    If everything is lost, how do i boot to restore my time machine backup from the external drive?
    all help is apreciated.
    Thanks in advance

    Sorry about that I just realized that Boot Camp may have decompressed your ISO, We can't really do much because Boot Camp may have told the mac to boot  from the flash drive, but now your mac is most likely not being told to  boot from it. (You where able to boot from the drive before so I would  keep it all intact) Is your keyboard wireless (because it can cause your mac to not to register keys being pushed at the Macs start) which this may be preventing you from getting into recovery mode (Command-R) or the OS choosing screen (Option).

  • Boot Camp not installing Windows 7 - "No bootable device, insert boot disk and press any key."

    I need some help with something. A while back, I put a brand new hard drive in my MacBook, a 500 GB model to replace the 120 GB one. I cloned everything successfully to the new drive via Carbon Copy Cloner, but now I want to make a Boot Camp partition on the drive. The SuperDrive in it is defective, so I use an external FireWire drive. So far the Boot Camp Assistant in 10.7 Lion works fine in creating the partition, but when it gets to the part where it tries to boot into the Windows installation disk (32-bit Windows 7 Home Premium, or could the 64-bit work fine as well?), it shows a black scree nwith "No bootable device, insert boot disk and press any key." I try pressing keys, but nothing happens.
    I also tried using rEFIt, but that didn't work out either.
    Here are the specifications of my machine...
    MacBook (Early 2009 model)
    2.0 GHz Intel Core 2 Duo processor
    4 GB of RAM
    500 GB SATA hard drive
    Dual-layer SuperDrive (defective, may replace it once I have the cash)
    NVIDIA GeForce 9400M graphics chip
    Mac OS X 10.7.2 Lion
    Can anyone help me out with this? Is there some sort of workaround?

    Wiley207 wrote:
    Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
    Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
    Were you doing any of the special workarounds with refedit etc?
    What model USB DVD drive?

  • Trying to Install Windows 7 onto MBP Mid-2010 but I get this "No bootable device -- Insert boot disk and press any key". What do I do?

    I'm trying to install Windows 7 onto my MacBook Pro Mid-2010 (MacBookPro6,2) from a USB drive, since my Super Drive no longer will burn DVDs or CDs. I did the XCODE trick to allow me to make the bootable USB. But when it reboots after partitioning I get this, "No bootable device -- Insert boot disk and press any key" message. When I press a key after reinserting the USB it still won't boot after pressing a key. I unplugged anything connected to it and it still doesn't work. Is there any way I can get it to be recongized or do I just need to get an external disc drive and burn a disc that way? 

    If your computer came with an inetrnal optical drive, you must use that to install Windows.

  • HT1199 After trying to install window 7 my new iMac will not reboot back to apple. Black screen "No bootable device -- insert boot disk and press any key". How do I get out of this?

    After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?

    Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.

  • What i have done wrong: I got the information "no bootable device insert boot disk and press any key

    I use yesterday bootcamp to instal windows 7 at my mac. After i had start bootcamp, i instaled windows, particion my hard driver, and restart my computer. After i had restarted my computer, i got a black screan with the information: no bootable device insert boot disk and press any key.
    To press any key was not possible, to get out my cd of the drive is not possible. Can you tell me what happen?
    Thanks

    No I don´t use Fusion Drive. And yes i have read guide to use bootcamp.
    I use only the bootcamp to create the particion.
    Steps:
    1. Start Bootcamp
    2. Create a particion and updates the drivers for windows at mac
    3. divide the hard drive in 150 gb for mac and 100 for windows
    4. particition is created
    5. Put the Windows 7 OEM in the driver
    5. restart the mac
    6. after restart the mac i got the information:
    no bootable device insert boot disk and press any key
    to press any key was not possible. Only black screan
    The support told me it is no possible to use Windows 7 OEM at a mac, but i have seen video, where people use windows 7 OEM and the guy in the shops say this is possible.
    What was is wrong?
    Is OEM possible or not?

Maybe you are looking for

  • Generated JNLP and closing the original browser window

    Hi All, This is my first post so bear with me. Here is my problem. I am using Web Start for an application. I need to check to see if web start is installed or not. If it is NOT I need to auto-install if it is I need to call a servlet that dynamicall

  • Include Prefix before generating System Number

    this is my code to generate company code IF :COMPCODE IS NULL      and :COMP_NAME is not null then      SELECT NVL(MAX(COMP_CODE),0)+1 INTO :COMPCODE FROM MSTR_COMPANY; UPDATE MSTR_COMPANY SET COMP_CODE = (SELECT NVL(MAX(COMP_CODE),0)+1 FROM MSTR_COM

  • Outlook users' problems with Apple mail attachments

    Folks on Windows XP using Outlook 2003 are having problems with email from Apple mail. Apple mail is using Windows Friendly Attachments and Rich Text as the settings. Sometimes attachments (Word, Excel, PDF) come in fine with an additional .htm attac

  • List of text symbols

    hi, Can i get the o/p as list of text-001,text-002......text-a001....depending on nos of literals in given code. eg: Literal         Text Symbol 'ABC'           text-001 'DEF'           text-003 'Line is'       text-aa1 Thanks

  • New time sig in Global tracks affects all later time sigs

    We've been here before, but I seem to remember someone (Rohan..?) saying that entering the time sig in the Score editor was a way round this problem. However I've just been trying that method and it's no better. Some later time sigs still disappear.