No Change Document in outbound queue for customer status in table VBUP

Hello all,
we face the following issue. A customer status (UVP04), changed by a customer program, is not written in the outbound queue (lbwq) to transfer it in the business warehouse.
I checked several Function modules (VERKBELG_WRITE_DOCUMENT, MCEX_UPDATE_CALL_11.....) without success.
Any help would be appreciated.
jg

Solution found: Dummy change with VA02, that generates a new record in the outbound queue.

Similar Messages

  • Change document log not created for customer in Batch input/BDC

    Hi Guys,
    Change document log is created when you manually change the customer using XD02 but when run the Batch/BDC the values are Changed but the change document is not created.
    Please someone can give me some hints?
    Luca.

    Any update guys????
    Regards,
    guru singh

  • Generate outbound idoc for Customer Master

    Hi Developers,
    I have requirement to generate outbound IDOC for Customer Master Data. I need to send customer master data through an Outbound IDOC. Can we generate an outbound DEBMAS06 idoc? Can someone help me finding a solution to this problem?
    Thanks in advance for helping.
    Regards,
    Gajendra

    Hi,
    If you have done all the required settings (logical system, partner profiles, distribution model), then either transaction BD10 / BD14 will help you generate the IDOC.
    If you want to send the idocs automatically, then you will to configure some program.
    Unlike transaction data, Master data IDOCS are not triggered immediately, you will have to do the required configuration in SPRO.
    Transaction SPRO
    SAP Customizing Implementation Guide -->
    SAP Web application Server --> Application Link Enabling --> Modeling and Implementing Business Processes -->
    Master Data distribution --> Replication of Modified Data --> Creating IDOCS from Change Pointers
    Take a look at this thread.
    Re: automatic Idoc outbound
    Regards,
    Ravi
    Note : Please mark the helpful answers
    Message was edited by: Ravikumar Allampallam

  • Disable Change documents in outbound delivery

    Dear Experts,
    Can anyone give me information about disable change documents in outbound delivery's???
    Thanks

    Hi,
    When you create the delivery the shipping point is already determined. One factor of shipping point determination is the plant.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607cd545a11d1a7020000e829fd11/frameset.htm
    Shipping Point Determination  
    Shipping points are independent organizational entities within which processing and monitoring of the deliveries as well as goods issue is carried out. A delivery is processed by one shipping point only.
    Criteria for Proposing a Shipping Point
    A shipping point can be determined for each order item. How the shipping point is determined depends on three factors:
    Since shipping point is determined in the SO, for each order item, in my opinion you have little chance to be able to change the plant in the delivery document of which prerequisite is a valid, determined shipping point.
    Regards,
    Csaba

  • PI to ECC via ABAP Proxy - Outbound Queue for HTTP

    Dear Experts,
    Is there any Outbound Queue for HTTP?
    I've a interface scenario where the receiver is SAP ECC and the receiver adapter XI ABAP proxy. As I see in the communication channel the transport protocol used is HTTP. So I think could there be an outbound queue to manage HTTP connection when PI send the data to SAP ECC?
    Just like when we are sending IDocs to ECC via tRFC, we could check if the IDoc has really been sent to ECC by checking in tcode SM58 (Outbound tRFC).
    In case for ABAP Proxy via HTTP, is there any similar connection to SM58 (IDoc via tRFC)?
    Thank you,
    Suwandi C.

    Hi Kandasami,
    Thank you for the reply. I will check for it.
    Hi Jens,
    Yes, I mean somewhere after the SXMB_MONI in PI and before SXMB_MONI in ECC, is there any queue in between those two?
    Thank you,
    Suwandi C.

  • Creating Change Document for Custom Field in Table PROJ

    Hi,
    We have a few Custom Fields in Table PROJ.
    What needs to be done so that every time a particular custom field  is changed, change document in table CDHDR and CDPOS are created.
    Regards,
    Tarun Bahal

    Hi Tarun,
    Please refer [Link1|https://help.sap.com/saphelp_nwmobile71/helpdata/en/2a/fa018f493111d182b70000e829fbfe/content.htm] & [Link2|http://help.sap.com/saphelp_erp2005/helpdata/en/db/7a2a40ce93185de10000000a1550b0/content.htm]
    Hope this helps!
    Regards
    Shital

  • How to generate an outbound IDOC for customer Invoice

    Hi
    I want to configure that if I create a invoice using TCODE FB70 it should automatically create a outbound IDOC ACC_BILLING( for customer).How I can achieve this. Can any one give me complete step by step help.
    thanks in advance.
    karunb

    You should be able to use it using 'change pointers'.
    For this you will first need to activate change pointer for this message type (check SALE > modelling..>Master data distribution). Next, you will need to setup your ALE config for this IDOC/message type.
    In ALE, you will be able to either run a standard SAP report adhoc, or schedule it such that all changes recorded using change pointer (changes including new customerr records) are collected as IDOCs and sent.
    This is a standard SAP scenario, you only need to do the config/setup to get there. You may wish to read more on change pointers to understand this.
    cheers,

  • Outbound queue in NOSEND status

    Dear All
    We are doing integration between CRM2007 and lotus domino server (6.5)
    And we have done installation of groupware connector (2.1) and proxy (Default) and replicated all the customizing objects successfully and we are using ABAP_MAPBOX.
    So, when we try to synchronization of BPu2019s between CRMàGW, we are getting errors.
    WE Can see in trnx SMQ1 (outbound queue monitor) ISP_O* queues with NOSEND status.
    When, we verified that there is a lock in the Connector... Error code is 9 (Unspecific error
    most probable reasons) with user name (ADDRESS_BOOK, GWA_01) but USERLIST.xml contains replicated BPs address and even we checked the Trace log which specifying that, "Unspecified error: Corresponding proxy for gw server is not found: xyzserver-dhq/xyz".
    Regards
    Subbaraju

    Subbaraju,
    We too are running CRM2007 with LotusNotes/Domino 6.5.
    The ISP_O* items you see in NOESEND will remain in the outbound queue until the groupware adapater (GWA) picks them up, your problem is with the GWA itself. 
    To see if these are, in fact, your outgoing partner records - check the ownership of the ISP queue:  SE16 table = ISPQTAB
    I recommend installing the connector and the default proxy on the same server, but it sounds like your proxy has stopped functioning.  If you startup the Lotus Domino Connector, the monitor, you should see a red light on the proxy status.  Make sure you applied the latest Groupware Connector Patch from SWDC - SAPGRPWCN14_0-10002067.ZIP.
    I also recommend sticking to the precise versions of required software:
    SUN JDK or JRE 1.4.2 or higher
    Sun Java Mail (sap recommends 1.3.1)
    Java RunTime 1.4.2
    JavaBeans(TM) Activation Framework 1.0.2
    Hope this helps.
    - Brian.

  • No Customization for Customer 2002missing in table CIN customer master

    HI,
    When Iam saving the excise invoice the error is  coming like..
    "No Customization for Customer 1004 missing in table CIN customer master".
    How i can do?
    regards,
    vas.v.s

    Hi Vas,
               Please check the Customer master record in Sales Area data at Billing Documents Tab ,Tax liable or not liable.
             and also check the Taxes in IMG --> Sales and distribution --> Basic Functions --> Taxes.
    Regards,
    Murali.

  • Outbound IDOC for customer master

    Hi
    I want to configure that as soon as I create a customer master using the transaction XD01 it should generate an outbound IDOC. Can anyone tell me how to configure this and what need to be br configured.
    Thanx in advance
    regards
    Vinod

    Hi Vinod,
    We can distribute master data in many ways like Send original copy, Send changes and third one is Pull master data.
    Go to txn SALE, and follow the steps to configure your scenario.
    I think in your case you have to use Message Control or
    Output Determination.
    visit this link for message control...
    http://help.sap.com/saphelp_erp2004/helpdata/en/c8/198afa43b111d1896f0000e8322d00/frameset.htm
    Regards,
    Narinder Hartala

  • Changing Document Title in Pages for iPad and VoiceOver

    Is there a trick to changing the name of the document in Pages for iPad when voiceover is enabled. I can change the document name when voiceover is turned off but there doesn't seem to be away of getting to the label when voiceover is turned on.

    What makes this difficult is that I can export the documents in PDF format, but then I cannot view them in Pages on the iPad as they cannot be uploaded into iCloud and Pages cannot access documents in other cloud storage sites. Pages uses the Word templates best.
    I've considered Quickoffice, but don't want to spend the $$ on an app that may not work.
    I've even thought about Team Viewer and accessing the documents on my Mac at home, but why remote access another computer just to view native files?
    Thanks for the responses.

  • Document protocol identification error for custom protocol

    Hi,
    Working for B2B inbound transaction. By using B2B need to transfer file from remote TP location to Host TP location. The file type is non EDI file (FLAT file of type fixed length) .
    I am doing given below steps but B2B giving document identification protocol error after file picked for processing.
    Document Defination at administration level:
    Protocol : Custom
    Version : 1.0
    DocType : CustomerDoc
    DocDef : CustomerDocDef( In these mentioned values as
    Identification Type = "Flat"
    Identification Start Position = 1,
    Identification End Position = 1 ,
    Identification Value = 1)
    Host Tp set up:
    TP Name : Client
    EDI INTERCHANGE ID : ClientID
    EDI GroupID : ClientID
    EDI Interchange ID Qualifier : 01
    Listening channel : Client_Deliverychannel
    Remote TP setup :
    TP Name : Customer
    EDI INTERCHANGE ID : CustomerID
    EDI GroupID : CustomerID
    EDI Interchange ID Qualifier : 02
    Document IMPORTED : Custom --> 1.0 --> CustomerDoc --> CustomerDocDef
    Listening channel : Customer_Listeningchannel
    Agrement for the Remote TP 'customer:'
    Document using : Custom --> 1.0 --> CustomerDoc --> CustomerDocDef
    TP names using : Customer , Client
    Listening channels using : Customer_Listeningchannel, Client_Deliverychannel
    Sample Flat File Using:
    1 00123451107200600123456780021000021001500049870USD 0000000000
    Thanks&Regards,
    Sridhar.Rachumallu.
    Edited by: user1133742 on Jun 29, 2010 11:54 PM
    Edited by: user1133742 on Jun 30, 2010 12:00 AM

    Configuration is looking fine. however error says B2B is not able to identify incoming document.
    Please paste/send the log in trace:32 mode for further analysis.
    Rgds,
    Nitesh Jain
    [email protected]

  • Outbound program for Customer mastrer

    HI,
    My requirement is when ever customer is created or changed with existing customer and save the customer i need to send the customer bank account details(Credit/Debit) details along with header details through IDOC.
    Could you pleaser suggest me where ineed to write my code.
    Thanks,
    Hari.

    This can be achieved by using the Change pointer concept.But in ur requirement only certain data has to be send to the targetsystem. Use the Segment filtration concept to achieve this. Follow the below steps;
    1. Go to SALE
    2. Expand Modellinga and Implementing process, Master data distribution, scope of data for dist,
    3. Execute Filter Idoc segments
    4. Enter the message type(DEBMAS)
    5. Enter the sender, Reciver and Segment types which u are not interested to send
    I hope u know all the configurations that are needed to send the Idoc and activationg of Change pointers.
    Regards,
    Kiran Bobbala

  • Document splitting not working for customer & vendor Payment

    Hi,
    We have actived Document splitting on profit center for segment level reporting.
    In below scanario Document spliting working fine.
    Vendor Invoice (Docuement type - KR)
    General Ledger view
    Expense Dr 1000      PC1
    Vendor   Cr  1000     PC1
    At the time of Payment (General ledger view) (Document Type - KZ)
    Vendor Dr  1000        PC1
    Bank     Cr   1000       PC1
    In the above scanario we dont have any issue, Based on invoice profit center spliting automaticlly in bank in General Ledgerview.
    How ever in the below scanario Document spliting is not working in payment
    No issues in Invoice
    General ledger view
    Exp  Dr  1000 PC1
    Exp Dr   1500 PC2
    Vendor Cr 1000 PC1
    Vendor Cr 1500 PC2
    When we make payment to vendor Document splitting is not working, it get splitting in zero balance clearing account
    vendor Dr 1000 PC1
    Vendor Dr 1500 PC2
    Bank     Cr  2500  (No profit Center)
    Doc splitt A/C 1000
    Doc Split A/C  1000 PC1
    Doc Split A/C   1500
    Doc Split A/C    1500 PC2
    My Finance Team requires automatic split up in bank based on vendor profit center.
    We are using Business Transation 1000 (Payment) for document Type - KZ & DZ.
    Regards,
    Lokesh

    Can you please confirm if the following settings exist in your system in various IMG nodes.
    1. Bank G/L account is assigned to item category 04000 (IMG node: Classify G/L Accounts for Document Splitting).
    2. Document type KZ is assigned to business transaction 1000 and transaction variant 0001 (IMG node: Classify Document Types for Document Splitting).
    3. In IMG Node "Define Document Splitting Rule", under the method that is assigned to your company code, transaction 1000 and variant 0001, you see 04000 as one of the item categories to be edited.
    4. If the answer for (3) above is yes, if you double-click on 04000 item category line, the processing category is set to 1 (Splitting based on base item categories).
    5. Now when you double-click on 'Base item categories', you see 03000 - Vendor as one of the base item categories in the list there.
    Please respond with Y / N to the above questions and we can go from there.

  • Create New Document - Suddenly Lost Ability for Customer Option

    Hi -
    All of the sudden I can't create a customer profile when creating a new document.  Earlier I selecting the print profile.  I tried opening a new document and creating a custome profile but that option is grayed out. 
    Not sure if this is related but I created custome brushes yesterday but they don't appear today.  Is that because of the profile that the brushes were created with and without that profile I won't see the brushes? 

    I guess I still don't get it.  I create a new brush in print profile but when I open a new doucment with that profile that brush isn't there.
    Print Profile with New Brush Created
    New Doucment with Print Profile

Maybe you are looking for