No change in disk space
Hi All,
i am under process of re-installing EBS 11.5.10.2 on RHEL4.0
After stopping the services successfully and manually deleting the tops and rebooting
df -h gives
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 9.7G 2.0G 7.2G 22% /
none 1013M 0 1013M 0% /dev/shm
/dev/sdb2 2.5G 36M 2.3G 2% /tmp
/dev/sdb5 60G 24G 33G 42% /u01
/dev/sda2 58G 5.2G 50G 10% /u02
/dev/sdb3 388M 59M 309M 16% /var
the used space is stil the same. what could be the problem
Please Suggest
Regards,
mirage
hi hsawwan,
thanks for the reply.
yea i have followed doc ID: 110372.1 to clean up. I have deteled the (<sid>appl, <sid>comn, <sid>ora, <sid>db, <sid>data) directories NOT the oracle folder.
[root@eureka u01]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 9.7G 2.0G 7.2G 22% /
none 1013M 0 1013M 0% /dev/shm
/dev/sdb2 2.5G 36M 2.3G 2% /tmp
/dev/sdb5 60G 24G 33G 42% /u01
/dev/sda2 58G 5.2G 50G 10% /u02
/dev/sdb3 388M 59M 309M 16% /var
output of 'du -h --max-depth=1
[root@eureka u01]# du -h --max-depth=1
24G ./Stage11i
4.0K ./lost+found
8.0K ./oracle
24G .
there is "24G ." taking up 24G could you explain?
i had faced a similar issue earlier when in /u01 was duplicate under Stage11i folder.
Regards,
Mirage
Similar Messages
-
Changing Hard disk space for /opt
I have installed Sun8 on a pc with 4gig hdd. Only has
done a default install. I assume their must be enough hdd space left for installing the companion disk
(GNU Software) As well as installing Oracle.
1) Insatll Sun8 - default.
2) Start to install Companion Disk with GNU S/Ware.
Get error:
not enough space blocks in /opt
How does one knows how much space is left on a
hdd and in a spesific directory?? What happens during install? Are the programs been installed in /opt??
Does /opt be very large to hold temporary installation files?? How jmuch disk space I really needed for
Sun8 + Companion DIsk.
from FrancoisI had the same problem. The only way I know of in safely increasing the size without corrupting the system is to reinstall and change disk size for /, /opt etc.. The Sol8 should give you a default but they assume that you only install Sol8 core and not any other patches, companion etc..
If you have not installed any other apps, it is best to do this now. My suggestions is to use most of the drive for Sol8 (except for home - slice 7). You can always add additional drive to increase slice 7 size without corrupting OS. Keep in mind that you may want to install other utilities such as pclink or in the future any Sunpci card to run windows which will take shit load of storage space.
Good luck -
This occurred a few months ago when I changed the Disk Space setting to "To save disk space do not download messages larger than 1000KB".
Since then Thunderbird has truncated every message I've received no matter what the size.
Not your fault, but made much more annoying because my server, Telstra (Australia) does not let me read more than two or three messages at a time without a delay, whereas if messages under 1000KB appear in my inbox automatically I do not have this problem.
Would really appreciate a solution, as when I've been away from my emails I can have a number accumulate and it wastes valuable work time waiting to download them.
thanks, Wendyhi Matt, or someone else
Only rarely do I get an email larger than 1000kb. But not matter how small the email, even if only a few kb, Thunderbird truncates every single one, and after I have "untruncated" a few emails, the server refuses to let me untruncate any more for a few minutes. I have used the Thunderbird Disk Save tool for years previously with no problems, and I think this happened when I changed it from 500 to 1000kb a few weeks ago (may have been due to a Mozilla update). I truncate large files because I pay $45/month for 4GB of usage, with absolutely no option to Telstra because I live in the bush in Queensland and Telstra wireless is our only choice for broadband. I use Windows Security Essentials and don't know how to turn off email scanning in it if indeed it does scan my emails (have always assumed it does, but can't find a way to see if it is). In any case I wouldn't want to have this feature off permanently. This problem with truncating all emails has occurred after I started to use Windows Security Essentials. Any more targetted thoughts please to what I've explained above. -
Reclaiming disk space from deleted emails
I have had lots of issues with my internal disk on my powerbook running out of space and decided to do some clearing out of emails. I have my mail set to store on server and on my mac and have kept emails going back to 2004.
I used mailsteward software to archive old emails and then have deleted those emails from within mail app, deleting more than 20,000 emails.
The emails have gone but hasn't freed up an awful lot of space, maybe 100Mb when I was expecting a lot more than that.
Is this possibly because the actual mailbox files don't get shrunk back? Is there something I can do to reclaim the disk space? I have done a mailbox rebuild but that didn't do much either.
Thanks,
MikeIf you archive the mail using Mail Steward, then delete the items from the Mail database, exactly what change in disk space would you actually expect? You've just changed the location of the mail archive from a Mail database to a MailSteward database.
-
suppose I want to download a 4 or 5 GB file,in C:/ there is usually 2 or 3 GB left.So I changed the directory of saved files to E:/.Still low space problem occurs and the newly downloaded file is not saved.A low disk space message is shown.Why is this showing?How to resolve this?
in options under the "general" tab change the download folder,if that does not help change the option to "ask every time".I recommended to use DAP to download your files its great and accelerates your speed quite a lot.
link: www.speedbit.com -
G'day. I am using iMovie 11 and need to clear disk space. How can I do that using an external drive, leaving me the option to go back and make changes or access old events or projects from that external drive?
The slightly bigger question is whether you want to move all movie content to the external drive (essentially meaning that drive will always need to be attached when you're working with your videos), or whether you just want to archive older videos off to the external drive.
If you want to move all videos, then just move the 'Movies' folder in your home directory to the external drive, then create an alias of the external 'Movies' back in to your home directory. Now the 'Movies' icon in your home directory will point to the external drive and everything will just work (as long as the external drive is attached when you launch iMovie)
If you want to archive older movies then each Movie should have its own subdirectory within your Movies folder. These can easily be moved off to the external drive, and moved back should you ever need to work on those movies again. -
I am running iTunes on an IBM compatible system running Windows XP with a relatively small hard disk (70gb). I have 4 kids with 4 IPOD Touches, multiple IPOD Nanos, etc. Their apps and album art are eating up the hard disk space. I changed the Media Folder through Edit, Prferences, Advances, iTunes Media Folder to an external hard disk. The new music downloads and purchases go there but the apps and other items do not. How do I get the apps and other iTunes software and downloads to go to the external hard disk
There is no built in function to make this happen.
Your options are:
Upgrade the existing hard drive.
Try creating a link for the app folder on the external drive... this may or may not work.
Realistically, a larger hard drive is a better solution, then use the external drive for keeping a backup of the ENTIRE iTunes folder and any other personal data on the system. -
Available disk space keeps changing, sluggish operation
This is a continuation of my previous post. Upon restarting the computer and navigating in the finder, I noticed that the available disk space on my machine changes every few seconds, it seems to go up and down a range of about 500 mb every few seconds or so. Any idea at all what could be causing this and/or a potential solution?
These discrepancies in disk space may be due to Mac OS X using your hard drive as virtual memory. Sluggish operation is generally due to paging in and out of virtual memory. The solution to both problems would be to install more RAM.
Alex -
Tempro v2 - changing threshold for disk space alert
Hello,
I have downloaded and installed Tempro v2 on a Satellite A200. It is running fine.
However, tempro has a problem that was present on the version 1.x .
The low disk space alert is set to trigger, way, way too early at 25% disk space left on any partition. On a modern disk this is around 15GB. This is way , way too early to be told of a problem. I have swiched off this alert - which I don't want to do. There seems to be no way (that I can find) to set this alert to trigger at a more sensible value - say 10% disk space left or a given amount of disk space left - say 2GB.
Is there a fix for this or have I missed how to set this value as I don't want to run without knowing I am running low on disk space? Getting this alert at 25% is irritating.
Thanks
CliveHi
I dont think that you could change this value or settings
Tempro sends the notifications about the status of the whole HDD and therefore you have received this message.
Ive got this tool on my notebook too but didnt find any settings which would help to disable the notification about single partitions on the HDD -
UCCX 7 - Change alert threshold for disk space
We record every call into our UCCX 7 platform which makes my backups quite large. This causes an alert every night when the backups run from CRSAdmin stating that the server is running low on disk space and needs at least 40 GB free for B&R to run.
Is there a way to adjust this threshold?
ThanksPablo, thanks for the reply! I checked the event viewer on the UCCX servers and they are clean. This is not a Windows alert. This alert is coming from CRSAdministrator and is routed to the email address I have configured in the email subsystem (Appadmin / Subsystems / email.)
The server is not actually getting low on disk space when this alert is generated, it is simply going below the 40 GB free threshold that is built somewhere in the UCCX application. This is what the actual email looks like:
From CRSAdministrator@AUS-SVR-ICD-01
WARNING: CRS server AUS-SVR-ICD-01(172.21.X.X) is running low in free disk space
**DO-NOT-REPLY-TO-THIS-EMAIL**
CRS required that you have at least 43377659904 bytes available in drive C:, otherwise B&R will fail in operating. Please free up some disk space if required.
-Cisco Customer Response Application Administration.
So maybe the solution is remove the email address I have configured in the email subsystem for alerting and set up a syslog server instead for alarms?
Brett -
Low disk space - Deleted 50,000 messages - no change !
Netware 6.5 Server with GW 7
Over the last 2 weeks I have deleted 50,000+ messages from various accounts
Not freed up any disk space !
Do I have to run any routines to clear up this space ??
Getting critically low now ~ 3Gbeven more deleted now but,...
Delete & Empty ?
I'll give a go with Expire - I'm sure i tried that at the time but...
"Bob-O-Rama" <[email protected]> wrote in message
news:[email protected]..
>
> bill;2231979 Wrote:
>> Netware 6.5 Server with GW 7
>>
>> Over the last 2 weeks I have deleted 50,000+ messages from various
>> accounts
>>
>
> Deleting is one thing, that puts stuff in Trash. "Delete & Empty" or
> "Empty Trash" marks the items for purge, whic is to day "really" deletes
> them. Without the purge, the item will not be removed. So which of
> these variations did you actually do?
>
> -- Bob
>
>
> --
> Bob Mahar -- Novell Knowledge Partner
> Do you do what you do at a .EDU? http://novell.com/ttp
> "Programming is like teaching a jellyfish to build a house."
> More Bob: 'Twitter' (http://twitter.com/BobMahar) 'Blog'
> (http://blog.trafficshaper.com) 'Vimeo' (http://vimeo.com/boborama) <--
> Click And Be Amazed!
> ------------------------------------------------------------------------
> Bob-O-Rama's Profile: http://forums.novell.com/member.php?userid=5269
> View this thread: http://forums.novell.com/showthread.php?t=461883
> -
Free disk space not changing after deleting (large) photos
Hi,
I wasn't sure whether to post this on the iPhoto board or on the MBA one, since it's not clear if it's a system-level issue or not. Anyway, I had about 30GB of free space on my 256GB MBA and the other day I deleted four or five albums of photos from my DSLR that I'd downloaded to my computer, after I made backups of them elsewhere. In total there were about 3,500 photos, roughly 24MB each on average. I made sure that after deleting them, I deleted my iPhoto Trash as well as the system Trash. Neverless, my level of free space hardly budged and if anything, it decreased slightly. I've read several threads saying to wait a while as sometimes the system takes a delay to adjust - that's fine.
It's now almost five days later and the situation remains the same, if not worse. I ran DaisyDisk and aside from the usual large folders (my movies in iTunes etc, none of which had been added to since I deleted all those photos), the only one I couldn't recognise was this folder iLifeAssetManagement (9GB). I know that there are a few threads about this one, and most people seem to suggest you can clear this if you're happy to lose the content in your Photo Stream. The thing is, I've looked through some of the images in this folder and I'm quite positive that a number of them are from the DSLR albums (there are CR2 files, which I believe is Canon's exclusive RAW format). Some of the others are definitely from my iCloud Photo stream. I'm more than glad to lose all the DSLR ones, though I'd like to keep the iCloud ones and I don't really want to have to sort through 5,000-odd files. I'm positive that this folder is related to why I never gained that free space.
Has anybody else had issues like this and any suggestions for clearing this folder of all the files I already meant to delete, whilst keeping the others? Or have you had issues relating to this? Any help much appreciated.
Thanks.If you've installed third-party software called "Disk Drill," I suggest you remove it according to the developer'sinstructions. If you prefer to keep the software, refer to the developer for support. Otherwise, see below.
You may notice a difference in available space statistics between Disk Utility, Finder, and Get Info inspectors. This is expected and can be safely ignored. The Finder displays the available space on the disk without accounting for the local snapshots, because local snapshots will surrender their disk space if needed.
About Time Machine's "local snapshots" on portable Macs -
How to change disk space for encoding assets to external disk drive
My laptop has only 1G left and I can't seem to burn a video with iDVD 6. An error message says: "Not enough free disk space for encoding the remaining assets."
How can I use my external hard drive, where my project is being stored, instead for encoding the remaining assets?1GB left? Wow - I'm surprised you aren't having trouble with the OS!
Normally, OS-X likes at least 10% of your hard drive kept free for OS use.
You REALLY need to fee up hard disk space before you have major problems.
As for: > How can I use my external hard drive, where my project is being stored, instead for encoding the remaining assets?
As far as I know, you can't.
F Shippey -
Disk space used much larger than actual files
I noticed this morning that Terminal was giving a warning about running out of swap space, which I thought was odd, as /var/vm was only at around ~10GB, but later when I tried to install some updates, I noticed that it said I only had 1.8MB free on my hard drive. I ran a df -h and it showed %iused at 100%. I immediately deleted some logs to free up a few megabytes of space and started hunting for what could have been hogging all my disk space, I seem to remember having 60GB free last time I checked. I was deleting a few small files, when I noticed this
bash-4.2# du -h -d 1
6.2M ./.DocumentRevisions-V100
584K ./.fseventsd
583M ./.Spotlight-V100
0B ./.Trashes
31G ./Applications
2.1M ./bin
20K ./cache
3.8G ./data
5.0K ./dev
34M ./Developer
1.3M ./EFI
1.0K ./home
8.9G ./Library
1.0K ./net
0B ./Network
185M ./opt
12G ./private
1.5M ./sbin
0B ./Shared Items
4.1G ./System
52G ./Users
4.9G ./usr
4.0K ./Volumes
117G
So apparently, according to du, I am only using 117GB of my hard drive. I immediately ran this
bash-4.2# df -h
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/disk1 297Gi 283Gi 14Gi 96% 74220526 3630455 95% /
devfs 200Ki 200Ki 0Bi 100% 692 0 100% /dev
map -hosts 0Bi 0Bi 0Bi 100% 0 0 100% /net
map auto_home 0Bi 0Bi 0Bi 100% 0 0 100% /home
So my question is how is it that all of my files combined are using 117GB, including swap, but according to df, Disk Utility and Finder I am using 283GB? I am using FileVault 2, if that helps
Here's some more data
bash-4.2# diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 31DE1089-1F50-45A1-81C8-D42D61DB2EAC
=========================================================
Name: Internal Hard Drive
Status: Online
Size: 319213174784 B (319.2 GB)
Free Space: 16777216 B (16.8 MB)
|
+-< Physical Volume B22747BA-EF78-4BB2-A2ED-57A8A3C39C5E
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 319213174784 B (319.2 GB)
|
+-> Logical Volume Family 80EF550B-053A-4DAF-8CC0-45D832CA8865
Encryption Status: Unlocked
Encryption Type: AES-XTS
Conversion Status: Complete
Conversion Direction: -none-
Has Encrypted Extents: Yes
Fully Secure: Yes
Passphrase Required: Yes
|
+-> Logical Volume 43CA4685-144B-450C-A2AD-30643D38D310
Disk: disk1
Status: Online
Size (Total): 318877626368 B (318.9 GB)
Size (Converted): -none-
Revertible: Yes (unlock and decryption required)
LV Name: Internal Hard Drive
Volume Name: Internal Hard Drive
Content Hint: Apple_HFS
Also, according to Activity Monitor I have 804MB of RAM free, but my VM size is 430GB. It also says Swap Used: 2.85GB, however /private/var/vm is at 8GB.
System profile is here:
Audio:
Intel High Definition Audio:
Audio ID: 31
Headphone:
Connection: Combination Output
Speaker:
Connection: Internal
Line Input:
Connection: Combination Input
Internal Microphone:
Connection: Internal
S/PDIF Optical Digital Audio Output:
Connection: Combination Output
External Microphone / iPhone Headset:
Connection: Combination Output
HDMI / DisplayPort Output:
Connection: Display
Devices:
AirPlay:
Manufacturer: Apple Inc.
Output Channels: 2
Current SampleRate: 44100
Transport: AirPlay
Built-in Input:
Default Input Device: Yes
Input Channels: 2
Manufacturer: Apple Inc.
Current SampleRate: 44100
Transport: Built-in
Built-in Output:
Default Output Device: Yes
Default System Output Device: Yes
Manufacturer: Apple Inc.
Output Channels: 2
Current SampleRate: 44100
Transport: Built-in
Soundflower (2ch):
Input Channels: 2
Manufacturer: ma++ ingalls for Cycling '74
Output Channels: 2
Current SampleRate: 44100
Transport: Unknown
Soundflower (64ch):
Input Channels: 64
Manufacturer: ma++ ingalls for Cycling '74
Output Channels: 64
Current SampleRate: 44100
Transport: Unknown
After Effects 10.0:
Manufacturer: Apple, Inc.
Current SampleRate: 0
Transport: Unknown
AirParrot:
Input Channels: 2
Manufacturer: squirrels
Output Channels: 2
Current SampleRate: 44100
Transport: Unknown
Bluetooth:
Apple Bluetooth Software Version: 4.1.4f2 12041
Hardware Settings:
Address: C8-BC-C8-F0-BC-A5
Manufacturer: Broadcom
Name: niles-macbook
Firmware Version: v41 c822
Bluetooth Power: On
Discoverable: Off
Vendor ID: 0x5ac
Product ID: 0x8218
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Downloads
When other items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
mouse:
Address: d4-9a-20-81-10-c2
Type: Mouse
Firmware Version: 0x84
Services: Apple Wireless Mouse
Paired: Yes
Favorite: No
Connected: Yes
Manufacturer: Apple (0x3, 0x31c)
Vendor ID: 0x5ac
Product ID: 0x30d
EDR Supported: No
eSCO Supported: No
Incoming Serial Ports:
Bluetooth-PDA-Sync:
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Bluetooth-Modem:
Address:
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 9/4/13 5:28 PM
Result: Passed
Disc Burning:
HL-DT-ST DVDRW GS23N:
Firmware Revision: SB10
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose File > Refresh Information
Ethernet Cards:
ethernet:
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x10de
Device ID: 0x0d7d
Subsystem Vendor ID: 0x106b
Subsystem ID: 0xcb89
Revision ID: 0x00a1
BSD name: en0
Kext name: nvenet.kext
Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/nvenet.kext
Version: 2.0.19
Firewall:
Firewall Settings:
Mode: Allow all incoming connections
Firewall Logging: Yes
Stealth Mode: Yes
Graphics/Displays:
NVIDIA GeForce 320M:
Chipset Model: NVIDIA GeForce 320M
Type: GPU
Bus: PCI
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x08a0
Revision ID: 0x00a2
ROM Revision: 3533
Displays:
Color LCD:
Display Type: LCD
Resolution: 1280 x 800
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Hardware:
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB71.0039.B0E
SMC Version (system): 1.60f6
Serial Number (system): 4505005NGP6
Hardware UUID: 147BC83C-F831-52F6-976D-66749236DA55
Sudden Motion Sensor:
State: Enabled
Locations:
Automatic:
Active Location: Yes
Services:
Wi-Fi:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: c8:bc:c8:f0:d8:32
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Exceptions List: *.local, 169.254/16, 192.168/16
FTP Passive Mode: Yes
HTTP Proxy Enabled: No
HTTP Proxy Port: 6515
HTTP Proxy Server: 68.37.6.66
SOCKS Proxy Enabled: No
SOCKS Proxy Port: 9999
SOCKS Proxy Server: localhost
IEEE80211:
PowerEnabled: 1
RememberJoinedNetworks: 1
RequireAdminIBSS: 0
RequireAdminNetworkChange: 0
RequireAdminPowerToggle: 0
SMB:
NetBIOSName: niles-macbook
Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: dc:2b:61:fc:1c:ec
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
DNS:
Server Addresses: 127.0.0.1
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
SMB:
NetBIOSName: niles-macbook
VPN (PPTP):
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
PPP:
ACSP Enabled: Yes
Authorization Name: vpnbook
Authorization Password: A6935819-8F9B-4A32-A9E6-B7B3B69CAA86
Authorization Password Encryption: KeyChain
CCP Enabled: 1
CCP MPPE 128 Enabled: 1
CCP MPPE 40 Enabled: 1
Display Terminal Window: No
Redial Count: 1
Redial Enabled: No
Redial Interval: 5
Remote Address: euro195.vpnbook.com
Use Terminal Script: No
Dial on Demand: No
Disconnect on Fast User Switch: No
Disconnect on Idle: No
Disconnect on Idle Timer: 600
Disconnect on Logout: No
Disconnect on Sleep: No
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: No
LCP Echo Enabled: Yes
LCP Echo Failure: 15
LCP Echo Interval: 20
Log File: /var/log/ppp.log
Verbose Logging: Yes
SMB:
NetBIOSName: niles-macbook
Bluetooth DUN:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial on Demand: No
Disconnect on Fast User Switch: Yes
Disconnect on Idle: Yes
Disconnect on Idle Timer: 600
Disconnect on Logout: Yes
Disconnect on Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
SMB:
NetBIOSName: niles-macbook
Memory:
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x484D54313235533654465238432D47372020
Serial Number: 0x0973B606
BANK 1/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1067 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x484D54313235533654465238432D47372020
Serial Number: 0x0933B66D
Network:
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
Has IP Assigned: Yes
IPv4 Addresses: 192.168.1.5
IPv4:
Addresses: 192.168.1.5
ARPResolvedHardwareAddress: 00:26:b8:5d:6b:ed
ARPResolvedIPAddress: 192.168.1.1
Configuration Method: DHCP
Interface Name: en1
Network Signature: IPv4.Router=192.168.1.1;IPv4.RouterHardwareAddress=00:26:b8:5d:6b:ed
Router: 192.168.1.1
Subnet Masks: 255.255.255.0
IPv6:
Configuration Method: Automatic
DNS:
Domain Name: homenetwork.internal
Server Addresses: 192.168.1.1
DHCP Server Responses:
Domain Name: homenetwork.internal
Domain Name Servers: 192.168.1.1
Lease Duration (seconds): 0
DHCP Message Type: 0x05
Routers: 192.168.1.1
Server Identifier: 192.168.1.1
Subnet Mask: 255.255.255.0
Ethernet:
MAC Address: c8:bc:c8:f0:d8:32
Media Options:
Media Subtype: Auto Select
Proxies:
Exceptions List: *.local, 169.254/16, 192.168/16
FTP Passive Mode: Yes
HTTP Proxy Enabled: No
HTTP Proxy Port: 6515
HTTP Proxy Server: 68.37.6.66
SOCKS Proxy Enabled: No
SOCKS Proxy Port: 9999
SOCKS Proxy Server: localhost
Sleep Proxies:
1 Printer 1:
Marginal Power: 60
Metric: 703560
Portability: 35
Total Power: 63
Type: 70
Service Order: 0
Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
DNS:
Server Addresses: 127.0.0.1
Ethernet:
MAC Address: dc:2b:61:fc:1c:ec
Media Options:
Media Subtype: Auto Select
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Service Order: 1
VPN (PPTP):
Type: PPP (PPTP)
BSD Device Name: ppp0
Has IP Assigned: Yes
IPv4 Addresses: 172.16.36.248
IPv4:
Addresses: 172.16.36.248
Configuration Method: PPP
Destination Addresses: 172.16.36.1
Interface Name: ppp0
Network Signature: VPN.RemoteAddress=euro195.vpnbook.com
Router: 172.16.36.1
ServerAddress: 93.115.84.195
IPv6:
Configuration Method: Automatic
DNS:
Server Addresses: 195.60.76.114, 195.60.76.115
Supplemental Match Domains:
Supplemental Match Orders: 100000
Proxies:
FTP Passive Mode: Yes
Supplemental Match Domains:
Supplemental Match Orders: 100000
Service Order: 2
Bluetooth DUN:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Passive Mode: Yes
Service Order: 3
Power:
Battery Information:
Model Information:
Serial Number: W0043T3DRE1KB
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 164
Charge Information:
Charge Remaining (mAh): 4995
Fully Charged: Yes
Charging: No
Full Charge Capacity (mAh): 5137
Health Information:
Cycle Count: 97
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1105
Voltage (mV): 12162
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
Battery Power:
System Sleep Timer (Minutes): 25
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x0085
Serial Number: 0x00fce157
Charging: No
Printer Software:
Printers:
Printers:
Path: /Library/Printers/Brother/Filter/commandtobrother.bundle/Contents/Info.plist
Version: 1.0.5
Path: /Library/Printers/Brother/Filter/rastertobrother145.bundle/Contents/Info.plist
Version: 1.0.4
[Trimmed]
Path: /Library/Printers/Samsung/PDEs/JobRetention.bundle/Contents/Info.plist
Version: 1.05
Path: /Library/Printers/Samsung/PDEs/JobSetting.bundle/Contents/Info.plist
Version: 6.0
Path: /Library/Printers/Samsung/PDEs/Output.bundle/Contents/Info.plist
Version: 1.05
Path: /Library/Printers/Samsung/PDEs/Printer.bundle/Contents/Info.plist
Version: 1.05
Image Capture Devices:
Image Capture Devices:
Path: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/Info.plist
Version: 1.5.1
Path: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/Resources/DeviceInfo.plist
Version: 1.5.1
Path: /Library/Image Capture/Devices/Canon IJScanner2.app/Contents/Resources/DeviceMatchingInfo.plist
[Trimmed]
Path: /Library/Image Capture/Devices/HPScanner.app/Contents/Resources/DeviceMatchingInfo.plist
Version: 1.9.2
Image Capture Support:
Image Capture Support:
Path: /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Info.plist
Version: 2.3.0
Path: /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Resources/DeviceInfo.plist
Version: 2.3.0
Extensions:
Extensions:
Path: /System/Library/Extensions/AppleMobileDevice.kext
Version: 3.3.0
Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/AppleATAPIStorage.kext
Version: 3.1.7
Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/AppleXserveRAID.kext
Version: 3.1.7
Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/FireWireStorageDeviceSpecifics.kext
Version: 3.1.7
Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/SonyXDCAMDriver.kext
Version: 3.1.7
Path: /System/Library/Extensions/AppleStorageDrivers.kext/Contents/PlugIns/USBStorageDeviceSpecifics.kext
Version: 3.1.7
Path: /System/Library/Extensions/AppleUSBTopCase.kext
Version: 237.1
Path: /System/Library/Extensions/BJUSBLoad.kext
Version: 2.1.0
Path: /System/Library/Extensions/CellPhoneHelper.kext
Version: 1.2.6
Path: /System/Library/Extensions/hp_fax_io.kext
Version: 5.5.0
Path: /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
Version: 2.6.0
Path: /System/Library/Extensions/hp_Inkjet3_io_enabler.kext
Version: 3.3.0
Path: /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDEventDriver.kext
Version: 1.8.1
Path: /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDEventDriverSafeBoot.kext
Version: 1.8.1
Path: /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDUserClient.kext
Version: 1.8.1
Path: /System/Library/Extensions/IOStreamFamily.kext/Contents/PlugIns/IOStreamUserClient.kext
Version: 1.1.0
Path: /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBHIDDriverSafeBoot.kext
Version: 4.4.5
Path: /System/Library/Extensions/IOVideoFamily.kext/Contents/PlugIns/IOVideoDeviceUserClient.kext
Version: 1.2.0
Printers:
Printer 1:
Status: Idle
Print Server: Local
Driver Version: 1.0
Default: Yes
Shared: Yes
URI: dnssd://Printer%201._ipp._tcp.local./
PPD: HP Officejet Pro 8100-AirPrint
PPD File Version: 1.0
PostScript Version: (3010.000) 0
CUPS Version: 1.6.2 (cups-327.6)
Scanning support: No
Printer Commands: none
CUPS filters:
image/urf processed in Printer:
Fax support: No
PDEs:
Serial-ATA:
NVidia MCP89 AHCI:
Vendor: NVidia
Product: MCP89 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.30 Supported
TOSHIBA MK3255GSXF:
Capacity: 320.07 GB (320,072,933,376 bytes)
Model: TOSHIBA MK3255GSXF
Revision: FH415B
Serial Number: 90TFF00PS
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Rotational Rate: 5400
Medium Type: Rotational
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
disk0s2:
Capacity: 319.21 GB (319,213,174,784 bytes)
BSD Name: disk0s2
Content: Apple_CoreStorage
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
File System: Journaled HFS+
BSD Name: disk0s3
Content: Apple_Boot
Volume UUID: 9938BA16-8F0C-3D96-829A-2AF41E6A4C76
NVidia MCP89 AHCI:
Vendor: NVidia
Product: MCP89 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.30 Supported
HL-DT-ST DVDRW GS23N:
Model: HL-DT-ST DVDRW GS23N
Revision: SB10
Serial Number: KZ1A8TA3628
Native Command Queuing: No
Detachable Drive: No
Power Off: Yes
Async Notification: No
Software:
System Software Overview:
System Version: OS X 10.8.4 (12E55)
Kernel Version: Darwin 12.4.0
Boot Volume: Internal Hard Drive
Boot Mode: Normal
Computer Name: niles-macbook
User Name: System Administrator (root)
Secure Virtual Memory: Enabled
Time since boot: 2 days 19:13
Storage:
Internal Hard Drive:
Available: 15.79 GB (15,792,230,400 bytes)
Capacity: 318.88 GB (318,877,626,368 bytes)
Mount Point: /
File System: Journaled HFS+
Writable: Yes
Ignore Ownership: No
BSD Name: disk1
Volume UUID: 5A09BE44-23E3-301A-9831-E1C07F058FAB
Logical Volume:
Revertible: Yes (unlock and decryption required)
Encrypted: Yes
Encryption Type: AES-XTS
Locked: No
LV UUID: 43CA4685-144B-450C-A2AD-30643D38D310
Logical Volume Group:
Name: Internal Hard Drive
Size: 319.21 GB (319,213,174,784 bytes)
Free Space: 16.8 MB (16,777,216 bytes)
LVG UUID: 31DE1089-1F50-45A1-81C8-D42D61DB2EAC
Physical Volumes:
disk0s2:
Media Name: TOSHIBA MK3255GSXF Media
Size: 319.21 GB (319,213,174,784 bytes)
Medium Type: Rotational
Protocol: SATA
Internal: Yes
Partition Map Type: GPT (GUID Partition Table)
Status: Online
S.M.A.R.T. Status: Verified
PV UUID: B22747BA-EF78-4BB2-A2ED-57A8A3C39C5E
Thunderbolt:
Thunderbolt: No hardware was found.
USB:
USB Hi-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x0d9d
PCI Revision ID: 0x00a2
PCI Vendor ID: 0x10de
Bus Number: 0x24
Built-in iSight:
Product ID: 0x8507
Vendor ID: 0x05ac (Apple Inc.)
Version: 4.42
Serial Number: 8JAC2190MDCJ5A00
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x24600000 / 2
Current Available (mA): 500
Current Required (mA): 500
USB Hi-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x0d9d
PCI Revision ID: 0x00a2
PCI Vendor ID: 0x10de
Bus Number: 0x26
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0d9c
PCI Revision ID: 0x00a1
PCI Vendor ID: 0x10de
Bus Number: 0x04
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0d9c
PCI Revision ID: 0x00a1
PCI Vendor ID: 0x10de
Bus Number: 0x06
BRCM2070 Hub:
Product ID: 0x4500
Vendor ID: 0x0a5c (Broadcom Corp.)
Version: 1.00
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x06600000 / 3
Current Available (mA): 500
Current Required (mA): 94
Bluetooth USB Host Controller:
Product ID: 0x8218
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.41
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x06630000 / 6
Current Available (mA): 500
Current Required (mA): 0
Apple Internal Keyboard / Trackpad:
Product ID: 0x0236
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.90
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x06300000 / 2
Current Available (mA): 500
Current Required (mA): 40
Volumes:
net:
Type: autofs
Mount Point: /net
Mounted From: map -hosts
Automounted: Yes
home:
Type: autofs
Mount Point: /home
Mounted From: map auto_home
Automounted: Yes
Wi-Fi:
Software Versions:
CoreWLAN: 3.3 (330.15)
CoreWLANKit: 2.0.2 (202.10)
Menu Extra: 8.1 (810.9)
configd plug-in: 8.4 (840.22.1)
System Information: 8.3 (830.5)
IO80211 Family: 5.3 (530.4)
Diagnostics: 2.0 (200.24)
AirPort Utility: 6.3.1 (631.4)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x93)
Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.100.17)
MAC Address: c8:bc:c8:f0:d8:32
Locale: FCC
Country Code: US
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
AirDrop: Supported
Status: Connected
Current Network Information:
XZ2PB:
PHY Mode: 802.11g
BSSID: 00:26:b8:5d:6b:f2
Channel: 6
Country Code: US
Network Type: Infrastructure
Security: WEP
Signal / Noise: -58 dBm / -91 dBm
Transmit Rate: 54The 300GB partition is the partition I am booting off of, and the one I was writing about. Disk0s1 is the EFI partition, 210MB. The other Internal hard drive is the core storage physical volume, already mounted, mounted in the image. Recovery HD is the 650MB system recovery partition.
I rebooted to the recovery partition and used Disk Utility to verify the volume, it said everything checked out alright.
In disk utility, the top entry has this data
Name : Internal Hard Drive Capacity : 319.21 GB (319,213,174,784 Bytes)
Type : Logical Volume Group Available : 16.8 MB (16,777,216 Bytes)
Disk Status : Online Used : 319.2 GB (319,196,397,568 Bytes)
However the other entry, right below it has this
Mount Point : / Capacity : 318.88 GB (318,877,626,368 Bytes)
Format : Encrypted Logical Partition Available : 202.18 GB (202,175,160,320 Bytes)
Owners Enabled : Yes Used : 116.7 GB (116,702,466,048 Bytes)
Number of Folders : 241,519 Number of Files : 1,246,454
So I guess the reboot fixed my problem, df -h now shows 37% used, but the logical vomume group still shows only 16MB free. Anyways, things seem to be working now. -
"Not enough disk space" when there seems to be (+ rapid memory consumption)
[Note: I originally posted this in the iDVD section, but due to an answer I got there to another question and further conversations with my daughter, figured out this is probably an iMovie question?]
I'm a newbie to iDVD and iMovie and Forums (my last Mac was a Performa 6360--still using it for the family budget). I got my daughter a MacBook as a graduation gift. She is using it to combine movie inputs from a wedding/reception that come from digital camreas and a couple of video cameras. We went to Flip4Mac to get the necessary software/features to import .wmv files (only way we could download one of the video cameras was by going from PC to Mac--can't remember if it was a Sony or Canon).
Issue: When she tries to import vidoes into iMovie HD 6.0.3 which have already been transferred to her computer, she gets: "The file could not be imported: There is not enough disk space to import Macintosh HD/Users/julie/pictures/iPhoto Library/Originals/2007/Roll8/CIMG1442.AVI" [She says this is about a 4 min. clip.]
Basically the question is how to get more room on her disk to import and to save? She seems to only be able to Save--she can't Save Project as an option because it says she doesn't have enough disk space (she's already deleted the Trash). Help says you need to have more than 400mb of free space or it gets difficult but the indicator shows 28.8GB free space left...so there seems to be some kind of disconnect?? (Or maybe we're talking apples and oranges?)
[Even more disturbing, just in the last couple of days with only a little time spent on the computer, the 28.8 GB has dropped to 2.3GB--obviously there is something she is doing that she is not aware of or shouldn't be doing that is consuming memory at a rapid pace.] On top of that, she also gets the same error message when she tries to burn the project onto a disk using iDVD???
I went through the first 5 pages of the forum and couldn't see a similar problem, but then I may have not known what to look for?
Any help would be greatly appreciated...she's trying to give the DVD as a Wedding gift--somewhat belated.Hello Karstn Schluter,
This is fm's daughter who is havin ghte difficulites. at the end you tell me to try to answer 1-8 so i will try.
1- how can you tell if the avi is containing divx? or not?? do I need to just keep this in mind when importing these files
2- I have not brought in an external drive. I did try making my laptop computer a harddrive so I could import my imovie poject to my eMAC at one point, but it was not allowing me to do that either. Because I had to have it in DVD form or something
3- No I did not segment the internal drive....sorry How do you do that??? Right now I am trying to find out what is taking up all the memory and Hard Disk Drive space....i do not know how to do that either....Do you know how???
4-Yes I know flip4mac is for wmv....I guess what that question was emplying was that I also have wmv files that I am trying to import to imovieHD and that is not working either...I can get my avi to get into imovieHD, but not my wmv. files
5-THank you for the tip with the trash then another question to this one how do you delet projects that are taking up memory that are no longer in use?
6-Thank you for the tip...so then ignore the not enough disk space.....how can you alter the disk space so that you can save the project under save project as and not just save project?
7- Sorry my dad was miss informed I cannot import the wmv. files to imovie and I cannot import imovie to iDVD I only have transferred one and then all of the other files are not seen as movies so I can not import them?? Does that make since
8- When we were useing the Sony Camera originally we could not import the video to the MAC because it did not have the correct firewire cable and it would not been read onto the MAC computer. So, we have to buy the flip4mac equipment so that I would be able ot download the inoformation to the computer by a wmv.file dvd so we are having difficulites trying to import that file.
I hope these answers clear up the question a little bit more and sorry that your answers brought out more questions. Thank you very much for helping me. I was using a different program in my college class so changing to imovie and idvd has been a huge struggle for me. Thank you once again.
Maybe you are looking for
-
Problem with installing Photoshop elements 9 and adobe support advisor
Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week! I downloaded it and now I have a winzip file full of strange things (one of
-
Subject: Document attached to record (Automtically convert to PDF)
Dear All, My requirement in record management is as follows: I have a document attached to a record. (Tcode: SCASE) The document needs to be converted into pdf and attached a different node in the record. All of this should be done by the system auto
-
A script to help find the cause of recent upgrade breakage
This script accepts package names as arguments and will output both a full dependency tree for each package, including installation dates of each dependency, and a list of all dependencies arranged by installation date in descending order along with
-
Nokia N97 mini isync plug request start here (Ooop...
So I can't believe I can't sync my contacts and calendar on my mac with my brand new phone when I could do it without problems with my good ol' E65. Anyone by luck have any info on a release date or should I switch back to good ol'E65? If you feel a
-
In app purchase is a no show, what should I do?
Hi, does anyone know what to do if an in app purchase doesn't show up? I purchased extra credits for a game but nothing has happened! I have closed and reopened the app, turned iPad off and on again and completed all updates but still nothing!! I can