No colors when printing through AirPort Express?

I knew I couldn't use all the features (e.g. scanning) of my HP all-in-one printer F2180 through AirPort Express instead of USB. But is it normal I can't print in colors? Can it be fixed?

I am having the same problem. I am running an AirPort Extreme to a HP Deskjet F4180.
I spent two weeks on the phone and email with HP and they finally told me that it was a problem with Apple.
I just got off the phone with Apple support and they told me it is a driver issue which they have no control over. They told me to see if somebody in this forum had a work around or to search the web for a generic driver that "may" fix the problem.
If I find an answer I will let you know.
Good luck!!

Similar Messages

Why does my mac say "failed to connect to the device" when I try to print through airport express?

So a little back ground. I have a unibody 2 ghz core 2 duo running 10.5.8 and a mac book air running 10.7.5. I set a airport express and added a new printer to both computers using bonjour. My mac air has no problem connecting and printing but my unibody does. The "failed to connect to device" message come up after I open print que for that printer and then utility. It unibody sees the printer through bonjour and installs the printer but when asked to connect, nothing happens. can anyone help please?

If you updated from a previous version of OS X to 10.9 and had an older version of driver installed, then you can get this message. Sometimes a quick fix is to reset the printing system. Note that this action will remove all devices from the Printers & Scanners preference pane, but not the supporting drivers, so if you do have other printers or scanners on this Mac you will have to add them again.

Getting an Error:-9672 when trying to add printer through airport express

Hi everyone, I have a canon colour laser printer (LBP5000) works fine when I pop the usb straight in to the mac, but when I try setting it up by plugging the usb into my airport express I get an Error:-9672 this happens when setting up the printer in print & fax system prefs.
I have another printer set up on a different airport express, which works fine.... could this be a problem?
Any help would be great
Thanks
Lee

Hello Lee,
When you select the LBP5000 in the Printer Borwser > Default Browser view, the Print Using menu should automatically set. If it isn't, and you are having to manually set the printer, then that will be a likely cause for the error (which usually occurs when the wrong driver is selected).
Try turning off the Airport Express and the printer. After a few seconds turn the printer on first and after it finishes making it's warm up sounds, turn on the Express. Now try to add the printer via the Default Browser view.
If that doesn't help, check your Airport Express firmware version. Some previous postees have found that their problems are resolved by updating their firmware on their Airport Extreme/Express.
Regards,
Paul

Wireless printing through Airport Express stops after a few pages

I have a Canon MP780, which I tried hooking up to my Airport Express USB. Installation seemed to work smoothly with the Airport Utility, and it printed a test page just fine. However, when I printed a longer document, something kacked after a few pages (a communications error).
Hooking it up is a hassle (have to go through a wall to get to the AE/DSL modem setup), and I ripped it apart after upgrading the canon drivers to no avail. I'll try it again to get the exact error messages if there's more than a snowballs chance in hades that this might work, but thought I'd at least find out if it's hopeless or not before throwing more time at this.
Any help's appreciated... many thanks.

There has been similar posts on this forum regarding wireless stability. A few have indicated that there printing was fine until the recent Airport Client Update 2009-002. If you check your System Prefs > Software Update > Installed Software list, have you also run this update?
Pahu

Can I Print Through Airport Express With A Lexmark x5150?

Am I able to print through A.E. with my Lexmark X5150 All-in-one? I'm having issues. It's recognized by my laptop, but won't print through A.E. It does, however, print when the USB is plugged into my lBook directly. I think I have the latest drivers installed. Can anyone offer up any suggestions/help? Thanks in advance......

The Lexmark X5150 is not on the list of supported printers found at http://www.efelix.co.uk/tech/1013.html . Based on your findings, I suspect this printer just won't work with anything but a direct connection to your Mac's USB port.
Not many all-in-one printers are supported for connection via an Airport Express. For those few models that do work, only printing is possible - other functions like scanning won't work. For some all-in-ones, an alternative driver can be found that will at least support printing - but I cannot find any alternative driver that will work with the x5150.

Error 6753 when printing with airport express

Hi all-
I'm trying to us my airport express to set up wireless printing from my PC laptop. Right now, I've got a netgear router and I -think- I've managed to con nect the airport express to join that network. My goal is simply to use the airport express to print wirelessly.
I've got a green light on the AX and printer is plugged in by USB. However, every time I try to print I get this: 6753 error.
Status: green light
Mode: join a wireless network
Wireless: it's got my network and pw. I've checked the "allow Ethernet clients" although I don't know if I need that.
Connect using: Wireless Network
Underneath this it says "This AX shares a single IP address with wireless clients using DHCP and NAT." Then it has connection sharing bridge mode, but this is greyed out and I can't select anything.
Printers: I see my printer listed, but when I click share printers over Bonjour I get an error message before I can update the AX. It says to edit and change it to a wide area host name.
Do I need to change some settings? Or what "wide area host" do I need to change it to?
I am very new at this. Thank you for any help!

Thanks... I will try that first. I've also been advised to delete the network and add a new one with the printer connected... but your idea is simpler.
M

Printmanager crash signal 10 when printing to Airport Express

I'm getting a Printmanger crash (signal 10) when trying to print to an Airport Express.
Happens when printing to an HP 3600 and an HP PSC1315
Happens with very simple text documents and more complex documents
Both printers USED TO work with this Mac, and I haven't knowingly changed anything
Both printers work fine when connected directly by USB
Both printers work fine using the Airport Express from a Windows XP PC
Printing seems to start, but printer never begins loading paper, and printer queue just stalls (stops and asks to start again although starting again doesn't help)
Print manager logs indicate that print manager crashes with "Signal 10"
OS X upgraded to all the latest; latest HP drivers installed for both printers
This doesn't seem to be an issue with (1) the printers, (2) the Airport Express. Seems to be something in the print manager.
Printers are full of ink and aren't giving any error messages over USB or to Windows XP PC and have no blinking lights.
I'm pulling my hair out. Any ideas?

(Forgot to mention -- I've reset the printing system several times, re-creating the queue and re-recognizing the printer. The printer is always recognized quickly; Bonjour is working fine.)

Ipad printing through airport express base

Hello, I'm a new ipad user and I have been trying to print from my iPad to a USB Epson printer connected to an Airport express base. The printer is well connected to the home network since I can print from any computers on the home network. The two iPads we have don't see the printer. When we try to print, the iPad searches for a few seconds then gives an error message about printer not being seen.
I know that my printer is not in the compatible list of airprint printers but from I have read, a USB printer can be connected to an Airport Express base and it does the same, unless this is not usable on an iPad. Will I have to buy a new airprint printer or a solution exists?
Thanks for the help.
S Dufort

This link - http://support.apple.com/kb/HT4356. provides a list of "air print compatible" printers.
Want to print from your iPad, but don't have an air print compatible printer? Check out the applications available from the iTunes store. Simply launch iTunes on the computer and select iTunes Store, or launch the iTunes Store from your iOS device. Search out the key words "iPad Printing".

Has anyone figured out how to print through Airport Express with Vista?

My wife has Vista on her laptop and everytime we try printing through the Airport Express/Bonjour it doesn't work. It might print one page and then stop, but never any further.
The latest Bonjour is installed.
Is there anything else?

Was this printer ever at one time connected to the Vista PC directly ? also with Vista ive seen issues with bonjour printers. Its due to either the firewall of this new junk they added in called windows defender. This application ive seen various results from it like it thought my install of Gears of War was a virus and etc. One thing you could even try doing is turn off the windows firewall and see if this resolves this issue. Seeing as this computer is behind a "hardware" firewall such as a router anyways you wouldnt really need to have the firewall on unless you had a strong need for the extra security

Cannot print through Airport Express

I have an iMac and my wife has an airbook. I am trying to use an Airpot Express for printer sharing. The printer (HP J6480) works fine from USB port but nada when I plug into AE. Any suggestions?

A printer connected to a Mac's USB port and the same printer connected wirelessly may as well be two different printers, as far as the Mac is concerned.
Create another entry for the AirPort Express - connected printer in System Preferences.
AirPort Utility 6.x: Use a USB printer on your Wi-Fi network
AirPort Utility 6.x: If your USB printer isn't responding
Your HP J6480 is an "all - in - one" device. Not all of them work with the Express's USB port. Only the print function will work, if at all.

Printing through Airport Express with 10.5.8

A few months ago I upgraded the old iBook G4 to 10.5.8 It's worked fine if a little slow on this old Mac. Now I'm trying to get my printer hooked up to the airport express for wireless printing. It's working for my wife's iBook with 10.4.11 but I can't get mine to work. I see the printer. It says it's ready. I hit print and the item shows in the printer que and then disappears off into the void. But the printer doesn't even twitch!
I just got the latest driver for the Epson CX7000f and that made no difference.
I've looked at airport utility, my system preferences for print & fax. I've read through a bunch of printer problem posts. 10.5.8 does seam to be a common theme.
Has anyone cracked this nut yet?
Thanks, Hugh

Just to check through the process:
You've connected your printer to the USB socket on the Airport Express.
Go to System Preferences>Print & Fax. If your Epson shows in the list I should highlight it and click the '-' button below the list.
Now click the '+' button. You should see your printer listed, and in the 'Kind' column it should say 'Bonjour printer'. Select it, change the name if you need to, and check that the drop-down menu shows the correct driver. Click 'Add'. Back in the first preference pane, check that it shows as the Default Printer.
Click 'Open Print queue' and check that it says 'Printer Ready'.
Close these panes. Now turn the printer on and try printing: any luck? (I might add that there isn't any general problem with 10.5.8, I can print to an HP and a Canon this way.)

When I connect my iphone directly to my receiver then connect to spotify, it plays through both speakers but when I connect wirelessly through airport express it only comes out through one speaker. Any thoughts?

When I connect my iphone directly to the receiver through a cable, it plays Spotify just fine but when I try to play wirelessly through Airport Express, it only plays through one speaker. Any thoughts?

yeah, that's what I figured.. I guess I'll try now to figure out exactly how to do that!

HT1595 I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

No, you cannot seperate the audio and video stream.
You can use optical audio to a sound system (I use sony sound bar) and play the audio via that.
jules

Can't connect to internet through Airport Express anymore

Suddenly, my PowerBook can't connect to the internet through Airport Express. Monday late afternoon--everything was fine. Put it in sleep, come back a few hours later, can't connect.
Thing is, Airport/wireless is working. Can stream audio to my home stereo.
And the DSL/modem are working. If I connect the machine via ethernet directly, I'm online.
Saw that some other users began having problems with USB/printer connections Monday. Could my problem be related?
What gives?
Any ideas?

Hello mnkyby. Welcome to the Apple Discussions!
It sounds like your AirPort Express Base Station (AX) in not getting a proper IP address from your modem.
Try this ...
o Connect to the AX's wireless network, and then, run the AirPort Admin Utility.
o Go to the Internet tab.
o Note the value for IP address. (Note: Do not list it here on the forum, just note what it is.)
o Is the IP address what you would expect from your ISP or is it something like: 196.254.x.x?
If the latter, try the following ...
Modem/Router Power Recycling - Quick
o Power-off the DSL/Cable modem, AX, & computer(s); Wait at least 5 minutes.
o Power-on the DSL/Cable modem; Wait at least 5 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the DSL/Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the DSL/Cable modem; Wait at least 15 minutes.
o Power-on the AX; Wait at least 5 minutes.
o Power-on the computer(s)

Can we print with a non-wifi printer via Airport Express?

Is it possible to print with non-wifi printer via Airport Express?

Read through this previous thread for answers: https://discussions.apple.com/message/21994667#21994667

No colors when printing through AirPort Express?

Similar Messages

Maybe you are looking for