No connection to the Integration Builder while using ABAP Proxies

Hi All,
Here am getting an error when i say SPROXY in R3 system.
No connection to the Integration Builder while using ABAP Proxies.
For this i have gone through the blog no 3022.
and i did all the connection.And then i have gone through the steps
Go to---->test connection steps.I added the address called com.sap.aii.server.name.repository in SPROXSET table.
and i run the Tcode SPROXY.Now am getting into DUMP when is say SPROXY.
And also i run a program called SPROX_CHECK_IFR_ADDRESS to add the address
but i didn't found the path for Excahnge Profile it was disable.
and later i run a program SPROX_CHECK_IFR_CONNECTION
now it went into DUMP.
Can Anyone suggest me how to fix this error.
Thanks,
Kalyan.

hi kalyan
1)check whether your R/3 system is based on WEBAS 640 or WEBAS620 (if it is on WEBAS 620 you need to install xi ADD ON,if on WEBAS 640 no need)
2)check the report SPROX_CHECK_IFR_ADDRESS
The address is taken the from following parameters in the exchange profile (section 'connections'):
http://server:port/exchangeProfile --> Connection
com.sap.aii.connect.repository.name: Server (e.g. pwdf0436)
com.sap.aii.connect.repository.httpport: Port (e.g. 1080)
com.sap.aii.connect.repository.contextroot: Root (e.g. rep)
Furthermore, the logon data is also read from the exchange profile(section 'ApplicationSystem'):
com.sap.aii.applicationsystem.serviceuser.name: User
com.sap.aii.applicationsystem.serviceuser.pwd: Password
rgrds
kummari

Similar Messages

SPROXY - No connection to the Integration Builder

Hi,
While generating a ABAP Proxy the communication between R/3 system and XI 3.0 repository did not work; transaction SPROXY displayed the following error message, 'No connection to the Integration Builder, only local data is visible'.
Can someone please help me out.
Regards,
Jigisha

Hi,
I had the same problem and I have solved it.
You have just to apply the following sap notes :
1232805 - Saint: Queue calculation for an add-on with CRT´s fail.
769120 - Support Package for APPINT 200_620
The first one is to update tha SPAM/SAINT to v 30 and the second one allow you use the pi/xi objects on application system.
There is another sap note 689847, but you just apply this if the sap notes above described did not work.
Paulo Correa

Do I need XI system for the connection to the integration builder

Hi,
I have a problem which i couldn´t manage to solve with the help of existing threads.
I got the problem that I dont have a connection to the integration builder, I know thats not new, but i want to know if it is possible to create a connection without XI System Landscape, because our company doenst have this system?
Hope there are possibilities.
Thanks
Volker Weckbach

Okay, yes its not expressed clearly i think.
I´ll explain my problem a bit nearer. I´ve worked with the Enterprise Services Builder. Now the Enterprise Services Browser in the TA se80 says that there is no connection to the integration builder, do I need this connection to have access to the work i have done in the ES Builder? I want to do Serviceimplementation.
If this connection is necessary, is it only possible to realize that via XI?
Are there ways to implement the service in an other way, maybe via NetWeaver?
I´m sorry if it´s hard to understand me, but i have not much experience with ABAP programming, i have just started.
Thanks Volker

No Connection to the Integartion Builder

Hai All,
        When I am trying to create proxies in SAP Server using SPROXY I am getting a message like "No Connection to the Integration Builder".
Thanking You In Advance.

hi,
for r3 to xi proxies it needs some configuration in R3 and XI.
IN R3 SYSTEM
1. Create HTTP connection in the business system.
RFC Destnation : SAPISU_XID
Configuration Details:
Technical Setting:
1. Following Inputs are required for technical setting
1 Connection Type: H
2 Target Host: System name
3 Service Number: HTTP Port name(5<instance no>00)
4 Path Prefix: /sap/XI/engine/?type=entry
Logon Security
On the Logon/Security tab page, enter the following logon data:
1 User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
2 Password: the password you have specified for this user
3 Client: SAP XI Integration server
4 Language: Language required
Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
5. Under Specific Configuration Data you can specify additional configuration data
   1.Select the relevant category under Specific Configuration Data.
   2.Choose Change Specific Configuration Data.
   For ABAP Proxies, Add the following configuration:
     1.Category RUNTIME
     2.Parameters: IS_URL
     3.Current Value: dest://SAPISU_XID
. Create RFC destination (TCP/IP) LCRSAPRFC and SAPSLDAPI for the SLD connection.
1.Execute transaction SM59 in the business system.
2.Choose Create.
3.Enter at least the following:
    1.RFC Destination: LCRSAPRFC
    2.Connection Type: T
    3.Description: <your description>
    4.Choose ENTER.
    5.Choose the Technical settings tab page and do the following:
    6.In the Program ID field under Registered Server Program, enter LCRSAPRFC
    7.This program ID must correspond to a program ID specified in the RFC engine settings of the SAP J2EE Engine on the Integration Server host.
also create Rfc Destnamtion SAPSLDAPI like above.
Maintain SLD access details in Transaction SLDAPICUST
IN XI SYSTEM
. Maintaining the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
1. Goto J2EE Engine
2. Choose Cluster --> Server --> Services. JCo RFC provider
3. Under RFC destination specify the following:
     Program ID: LCRSAPRFC
     Gateway Host: <Integration Server host>
     Gateway Service: <Integration Server gateway service>
     Number of process: 3
4. Under Repository specify the following:
Application Server: <Integration Server host>
5. Choose Set.
then u try ABAP proxies
reagrds
ajai

Using ABAP Proxies

Hi all,
I am trying to achieve the following scenario:
Read a file from a specific directory and directly insert the records into the SAP table by using ABAP proxies.
But during execution, I am getting the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>405</SAP:P1>
<SAP:P2>Method not allowed</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> <html dir=ltr> <head> <style> a:link a:visited </style> <META NAME="ROBOTS" CONTENT="NOINDEX"> <title>The page cannot be displayed</title> <META HTTP-EQUIV="Content-Type" Content="text-html; charset=Windows-1252"> </head> <script> function Homepage(){  </script> home page and then look for links to the information you want.</li> </ul> <h2 style="COLOR:000000; FONT: 8pt/11pt verdana">HTTP 405 - Resource not allowed<br> Internet Information Services</h2> <hr color="#C0C0C0" noshade> <p>Technical Information (for support personnel)</p> <ul> <li>More information:<br> <a href="http://www.microsoft.com/ContentRedirect.asp?prd=iis&sbp=&pver=5.0&pid=&ID=405&cat=web&os=&over=&hrd=&Opt1=&Opt2=&Opt3=" target="_blank">Microsoft Support</a> </li> </ul> </font></td> </tr> </table> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 405 with the description Method not allowed XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Could anyone please help me in this regard?
Thank you in anticipation.

Use this 3 blogs for proxies.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies(do the required configuration for activating proxies)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies(server proxies)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy(client proxies)

How to configure the Integration Builder connection Parameters

Hi,
If I leave the integration builder for a while, then I explore objects, the pop up message is:
"Connection to server lost You can log on again once the server is available again Do you want to log on again?"
I input password, some times regain the connection, most time not, then if not, I have to restart integration builder. I would like to know where I can adjust parameters to allow connection kept longer.
Thanks
Liang

Hi, Swarup:
Thanks for your reply.
The reality here is that we could not get solid support from BSAIS team, we came to many situations that we have to search around and tell them how to do the job like this (They are all afraid of Java Stack
I will keep search, if you have detailed information how to and where to configure those parameters, please let me know.
Regards!
Liang

Error "Test Agent could not connect to the test controller" while configuring the Test Agent on Client machine

Hi,
I am getting an Error “Test Agent could not connect to the test controller”
while configuring The Test Agent on Client machine.
Pre-requisite used:
VS2012 update 4, Test agent & Test controller of same version used
User has TFS admin access.
Same user id used for configuring Test Agent.
Description:
Test controller is installed on server A. I want to install test agent on client machine B.
Windows Fire wall is OFF on both Machines A & B. While configuring Test Agent below error is occurred:
“Test Agent could not connect to the test controller”
In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”
In Event viewer below error details given:
Unable to connect to the controller on ‘My Server: 6901’. The agent can connect to the controller but the controller cannot connect to the agent because of following reason: The requested name is valid, but no data of the requested type was found.
Make sure that the firewall on the test agent machine is not blocking the connection.
Could you please help me to find solution?
Thanks in advance!
Kanchan M
Kanchan

Hi Kanchan,
So on each computer, you create a local user account that is a member of the Administrators group, and use the same account and password on each machine(controller and Agent), am I right?
Could you enable the detailed log message?
http://blogs.msdn.com/b/aseemb/archive/2010/03/07/how-to-enable-test-agent-logs.aspx
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
>>In log file error was “I, 2015/04/02, 15:32:21.723, Could not get the status from the test agent. Exception: Failed to connect to an IPC Port: The system cannot find the file specified.”I
met a similar issue before which was related to the Firewall exceptions, maybe you could refer to it here:
http://stackoverflow.com/questions/12249093/test-agent-could-not-connect-to-the-test-controller-vs2012-agents
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error during launching the integration builder

Hi
I installed XI3.0 SR1 as for the installation guide.When i am accessing the Integration builder during Java webstart ,i am getting the following error after launching during Java Web start
<b>An error occurred while launching/running the application.
Title: Integration Builder
Vendor: SAP AG
Category: Launch File Error
JAR resources in JNLP file are not signed by same certificate</b>
Can anyone figure out error urgently.
regards

Hi Usman,
Have a look of the following thread:
<b>Integration Builder doesn't start after SP11 </b>
Integration Builder doesn't start after SP11
and this one for more details:
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/faq.html#213
Cheers,
Rob.
Message was edited by: Rob Viana

My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem. Windstream tech service is useless. i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help! windstream said everything is working on their end, yea right. What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products.
these are brand new machines with lion.
This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great. Please help before my wife losses it
thanks

There is a 2701HG-B, and a 2701HG-D. If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
By the way tell your wife it isn't that bad. At least you have an ethernet DSL modem. There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access. At least now only the craziest DSL providers still use those modems.

How come my brother and i can't connect in the same game online using my WET54GS5?

When i first got my WET54GS5 my brother and i could connect in the same online session using two ps2's that are both connected to the WET54GS5 which is linked up to my WRT54G V 5 router flawlessly. Now all of a sudden whenever we try to connect to the same game online the one that is already in that session gets disconnected. There have even been times where one got connected and was using the other persons settings (example: Jared and Justin log on to the same game at the same time, Jared can't connect, but Justin can however Justin is now playing as Jared's character.)We can connect to other games under the same setup just whenever we want to play in the same game we can't. It seldom works though but only like twice out of ten times. I'm wondering what the issue is here and if anyone has any suggestions on how to get us connected to the same game with no worries. And if your curious both playstation 2's are running star wars battlefront 2. Message Edited by JJbro1 on 06-17-2008 09:47 PM
Message Edited by JJbro1 on 06-17-2008 09:48 PM

Try to figure out or make sure QoS is enabled on both devices (referring to bridge and router) and set to AUTO mode or fair mode. Also ensure there is no manual settings on the PS2s for ip (this applies to most modern game systems as well)
Udated gaming systems are designed to attempt taking full advantage of bandwidth available, by enabling QoS, or similar named technology depending on the brand of the network device you will prevent your gaming system from hogging all the network bandwidth and stomping out the other game system. They will be forced to equally share the bandwidth and eliminate this kind of situation. I sometimes need 7 game systems online at once and I ran in to this problem a lot,, QoS enabled and never had it again.

Business Systems not appearing in the Integration Builder (Configuration)

Hi Experts,
I have created new business systems in the Integration Builder of my PI System.
This is not appearing in the Integration Builder.
I executed the delta cache in transcation SXI_CACHE but the issue is same. Please let me know what should I do to get the business systems.
Thank you.
Thanks
Kasee

Business system from SLD not visible in Integration Directory

Problems with starting the Integration Builder

Dear all
We've installed PI 7.0 as a part of a project, and have some consultants working in the integration builder and rwb.
Recently the we are unable to start the Integration Builder, and we get an error message prompting: "Unable to launch the application"
The Builder has worked flawlessly earlier, and the problem have suddenly appeared during the last week.
The Java error is:
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://<serveradress>:<port>/dir/directory/iaik_jsse.jar
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.io.FileNotFoundException: http://<serveradress>:<port>/dir/directory/iaik_jsse.jar
     at sun.reflect.GeneratedConstructorAccessor2.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
     at com.sun.deploy.net.BasicHttpRequest.doGetRequest(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: <serveradress>:<port>/dir/directory/iaik_jsse.jar
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     ... 18 more
Does anyone have a clue or answer to this strange problem?
Regards
Andreas

Hi,
Refer this thread;
Unable to Open Integration Builder
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
Regards,
Nithiyanandam

Created invalid WSDL with the Integration Builder Wizard

Hello altogether,
I'm sitting on a WSDL to Proxy scenario and therefore I created a WSDL file with the help of the Integration builder wizard and the how to guide. I created the URL after the standard scheme:
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet?channel=:<service>:<channel>
So my URL looks like the following:
http://pimachine:50000/XISOAPAdapter/MessageServlet?channel=:GetSapFunctionAsyncOut:SOAP_SENDER_TEST_SimpleObjectMessage
As service I inserted my outbound interface and as channel I inserted my sender adapter in the url. But if I try to call the WSDL with xmlspy I got the following mistake:
"HTTP error: could not post file... on server pimachine(500)."
and after that another window pops up with the message:
"Error sending the SOAP data"
Can anyone of you help me with that problem?
kind regards
Marcus

Hello Manisha,
I already tried it and it works. He first asks for my password and after that I got the following prompt in the Internet Explorer:
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.adapter.soap.web.MessageServlet (Version $Id: //tc/xpi.adapters/NW07_04_REL/src/_soap_application_web_module/webm/api/com/sap/aii/adapter/soap/web/MessageServlet.java#1 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of $Proxy45_10002
ModuleProcessorRemote not instantiated
regards
Marcus

Type of error in the log file while using using call transaction mode u2018Eu2019

Hi Gurus,
Please Answer for this qusetion urgently
what type of error exactly you will be seeing in the log file while using call transaction mode u2018Eu2019?
Thanks/
Radha.

Hi,
Can you be clear.
In call transaction , no error logs are created, you have to handle the errors explicitly using the structure BDCMSGCOLL.
Whenever you use E mode then if the transaction encounters any of the errors i.e. data type mismatching or invalid values etc, it will stop at that screen.
You can handle the errors in call transaction in the following method.
create a table using the structure BDCMSGCOLL.
then
loop at ......
      CALL TRANSACTION 'XK01' USING I_BDCDATA MODE 'N' UPDATE 'S' MESSAGES INTO I_MESGTAB.
endloop.
SORT I_MESGTAB BY MSGID MSGV1 ASCENDING.
DELETE ADJACENT DUPLICATES FROM I_MESGTAB.
LOOP AT I_MESGTAB.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID   = I_MESGTAB-MSGID
        LANG = I_MESGTAB-MSGSPRA
        NO   = I_MESGTAB-MSGNR
        V1   = I_MESGTAB-MSGV1
        V2   = I_MESGTAB-MSGV2
        V3   = I_MESGTAB-MSGV3
        V4   = I_MESGTAB-MSGV4
      IMPORTING
        MSG = MESG1.
    IF I_MESGTAB-MSGTYP = 'S' .
      WA_SUCCMESG-MESG = MESG1.
      APPEND WA_SUCCMESG TO I_SUCCMESG.
else     IF I_MESGTAB-MSGTYP = 'E' .
      WA_ERRMESG-MESG = MESG1.
      APPEND WA_ERRMESG TO I_ERRMESG.
    ENDIF.
ENDLOOP.
Hope this is clear.
Thanks and Regards.

How do I view a website over the full screen while using the 6 plus in horizontal mode

How do I view a website over the full screen while using the iPhone 6 plus in horizontal mod?

You said you found several domain.sites files.
iWeb uses one at a time to create webpages.
Your webpages, your site, has disappeared with MobileMe.
You have to find a new host and publish there.
But to publish you need one of your domain files.
Try iWebSites to open them :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html

No connection to the Integration Builder while using ABAP Proxies

Similar Messages

Maybe you are looking for