No data in cube,but there is data in F and E table, also in dimension table

Hi, gurus,
I successfully loaded more than 100,000 records of data into an infocube, but when I check the content of the infocube(without any restriction), unexpectedly no data displayed, also after I checked the F and E table, still no data, but there is data in dimendsion tables. what happened?
please help. thanks a lot.

Hi Kulun Rao,
Try the following options.
Check in the selection screen
Go to infocube through LISTCUBE t.code
Check the compression and roll-up statuses.
Check the reporting status in request tab.
Refresh the cube ( u already do it)
Check the index status in Request tab**
might be these things will help u.
Regards,
HARI GUPTA

Similar Messages

Tcode to enter data in estmj and estrh tables?

can any one know which tcode i have to use to enter data in estrh and estmj tables?

It is actually telling me that CG01 is obselete in my 46c system, it will not l let me do anything else with that transaction. I go to CG02, and I am able to create there.
Regards,
Rich Heilman

How can i update data in okc_k_items and csi_item_instances tables?

How can i update data in okc_k_items and csi_item_instances tables?
by EBS .
Thanks.

For csi_item_instances table, you can use the following API:
CSI_ITEM_INSTANCE_PUB.UPDATE_ITEM_INSTANCE
For okc_k_items, try using the following API:
OKC_CONTRACT_ITEM_PUB.UPDATE_CONTRACT_ITEM
Hope this helps!

Hi, I've checked how to use kannada keyboard in Yosemite. But, there are some 'vattu forms' and other grammar in Kannada language that I don't know how to use it. For eg, Preetiya taatanige nimma muddu mommagalu maduva namaskara? How to write this?

Hi, I've checked how to use Kannada keyboard in Yosemite. But, there are some 'vattu forms' and other grammar in Kannada language that I don't know how to use it. I know how to change between the keyboards and can also view keyboard. However, For eg, 'Preetiya taatanige nimma muddu mommagalu maduva namaskara' How to write this? If anybody can answer this, very much appreciated.
Thanks in advance for your reply.

In general, you need to use the "f" (kannada qwerty keyboard) or "d" key (kannada) between letters to make special forms. Also you may need to adjust the typography settings of the font, which is done by doing Format > Font > Show Fonts > Gear Wheel > Typography as shown below. If you can provide screenshots or more detailed info on things you cannot make, I can perhaps help.
It is important to note that MS Word for Mac does not support Indic scripts -- any other app should work OK.

I purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

i purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

You have a one-year hardware warranty & 90 days of free phone support. Take advantage of it, make an appointment at an Apple store or call AppleCare.

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

you can link
OOH.invoice_to_org_id=CUST.cust_account_id   -- invoice customer
OOH.sold_to_org_id=CUST.cust_account_id   -- sold to customer
OOH.ship_to_org_id=CUST.cust_account_id   -- ship to customer

I want to transfer a movie I have downloaded from itunes to my new IPAD. I have been on the itunes help menu, it tells me to look under 'devices' tab for IPAD. BUT there is no 'devices' tab and it does not list my new IPAD. Help!

I want to transfer a movie I have bought in itunes to my new IPAD. I have been trying to work how to do this for 3 days now. I have accessed all the itunes help and forums and wiki online. They all tell me to go to the DEVICES tab on itunes and select IPAD then sync. YUP seem simple, BUT there is not DEVICES tab listed on my itunes and it does not list IPAD. Years ago I set up my IPOD no problem and that is listed, but not the new IPAD. Can anyone help? I would love to be able to actually watch films on my IPAD!! thanks

If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

Profit center data in GLPCA and GLPCT Tables

Hi ,
We are in ECC 6 but with classic GL and profit center accounting.
We have the documents posted with profit center as the assignment object. When i check the documents through document display i could see the profit center in it , but when i execute the transactions 5KEZ , 2KEE i couldnt fetch any data. Actually there is no data updated to the GLPCA and GLPCT Tables.
These accounts are Frieght clearing , benefits clearing etc...
My actual requirement is the ending balances of GL accounts by profit center subtotals/ GL Trial balance by profit center .
Thank you.

Hi
If these are balance sheet accounts, you need to run period end transactions like 1KE* to transfer the balances to EC-PCA
also, Tick the "Online Transfer" in EC-PCA config & Specify these accounts in 3KEH and then post a transaction.... It should get transferred online on real time basis
Br, Ajay M

Problem in Selecting the data from EKPO and KONV tables

Hi Experts,
Presently I am working on Report with Comparision-Sheet Between the vendor's Quotations. I have to display the Discount, Freight, Packing and Forwarding, Vat in Item level data based on the conditions made in PO.
As per my Knowledge, Condition Types are stored in KONV Table. But there is no relation between KONV and EKPO tables. So, I am unable to print the data for Discount, Freight, Packing and Forwarding, Vat... How can I get the values from EKPO and KONV tables?
Thanks in Advance.
Thanks n Regards,
Muralikrishna.

Don't recall if this is correct, but you may need the condition number from the header (EKKO) combined with EKPO-EBELP or other field as you key to access KONV (KNUMH and KPOSN). My site doesn't run PP, so can't verify if the data is actually stored that, so just a possibility.

Craeting data fiel for data from KNA1 and ADRC table...

Hi,
I want to create a data file (tab delimited) which will have data from two tables, KNA1 and ADRC. The customer number, Name1 and Name2 fields data will come from KNA1 but the Street field data will
come from ADRC table. The ADRNR number will be a linkage between two tables KNA1 and ADRC.
I don't want to write a reprot for this. Can someone tell me if I can use SQVI for this and then go to options download in excel sheet directly from the menu.
Is there any other smarter way to do it ?
Regards,
Tushar.

Use an inner join between KNA1 and ADRC...The use <b>GUI_DOWNLOAD</b> FM to download the file...
Greetings,
Blag.

BAPI to update data in KNA1 and ADR* tables

Hi,
I have to change customer data via BAPI.
I'm searching for a BAPI that updates KNA1 and ADR* tables.
(so that data will be coherent).
I found BAPI_CUSTOMER_CHANGEFROMDATA1 but it seems to only update KNA1
and BAPI_ADDRESSORG_CHANGE that only updates ADR* tables.
Can you help me ?
Thanks,
Sandrine.

I came accross such a requirement but couldn't find a single function module.
I think try using both the FM's else BDC is the only option left.
you can use the FM "DEBITOR_BDCDATA" to get the BDC data for vendor and then edit it to add the address fields required.

Mac shockwave installation says successful but there's no shockwave folder and adobe site says not installed

Macbook Pro (Retina, 13-inch, mid-2014)
OS X Yosemite 10.10.1
3 GHz i7
64-bit* (based on table found in archived Apple support article that appears as first link in google search)
16 GB 1600 MHz DDR3 | Activity monitor says "Used: 9.58 GB (apps: 6, file cache: 2, wired: 1)"
78 GB remaining of 120 GB flash storage
One hard disk, no external
2 admin user accounts and guest account, second admin logged out
*Sorry for saying stuff you already know. I just don't know what you don't and want to be complete.
I arrive at adobe shockwave page, which correctly detects Mac computer, chrome browser. (Did that about 4 or 5 times)
I click download. (After first failed attempt, I'd start by ejecting install disk thing and put previous dmg file in trash)
DMG file arrives in download folder.
I open it.
I double click on the first of the two files: Shockwave_Installer_Full_64bit (other file is uninstall | Is yosemite operating system actually 32 bit??)
I close my browsers.
I click the "Next" buttons and agree to the thing
I type my administrator password for this administrator account
I manually choose Macintosh HD for the install location (1 time)
I go with the default option and verify that all users will have access (2 times)
I go with the default option for install location (rest of times)
It tells me what it's doing while progress bar fills and empties and repeats. Says stuff like "Moving files" "Working directory" or something, as it should.
My mac makes the install noise.
The install window says ~"Adobe Shockwave Player installed successfully"
I restart (only on one or two attempt(s))
I reopen browser, which reopens last pages
One of those pages is the chrome://plugins that an Adobe troubleshooting page told me to check.
I refresh it. There's no shockwave player. There is adobe flash player and it says "(2 files)" and version 16...
I go to the adobe page where I can click "Check now" to see whether my computer has shockwave.
Page confirms I do not have it by saying: "Sorry, Shockwave Player is either not installed or disabled on your machine."
Per some Adobe troubleshooting instructions, I prepare to repeat the process by searching for folder to delete it so that I can properly reinstall it (3 times)
There is no folder when I use finder to search "This Mac" or "All my Files"
I come to forum. I guess I will now try the really involved stuff about disabling login items and installing via a new user. I came here before trying it because the page said that those are ways to work around problems that may cause the installation to fail. But the installation window said it was successful. Did it go to the cloud?????? Did my computer auto-scrub for some reason unrelated to anything I did deliberately??
UPDATE: Tried the shift-key-during-restart-and-using-new-user but it didn't seem to make a difference.
UPDATE: I did, however, during that process, find that when I use that page in Safari to check installation, it says the latest version is installed. So maybe my question just got a lot simpler. Is this a Chrome problem beyond my own system and I just have to wait for Google to sort it out? Is Chrome somehow incompatible with Shockwave? According to a website I've been trying to use (via chrome) to complete class homework, I am missing shockwave and need it.
(2015.01.16)

Ok, I'm stupid.
Found another thread about this and typing 'install OS X Lion' in spotlight did the job.
https://discussions.apple.com/message/15670460#15670460
excusez-moi

Storing XML data in CLOB and relational tables

I would like to ask whether there is a possibility to store XML data using normal relational tables and CLOBs in the same time. For example I have some XML data (structured data) which I would like update very often and some which are only a kind of description. I found something about it in http://technet.oracle.com/tech/xml/infoocs/otnwp/about_oracle_xml_products.htm . But I do not know how to use Oracle8i views and some functionality of XML SQL Utility to retrieve XML data in one file.
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Maciej Marczukajtis ([email protected]):
I would like to ask whether there is a possibility to store XML data using normal relational tables and CLOBs in the same time. For example I have some XML data (structured data) which I would like update very often and some which are only a kind of description. I found something about it in http://technet.oracle.com/tech/xml/infoocs/otnwp/about_oracle_xml_products.htm . But I do not know how to use Oracle8i views and some functionality of XML SQL Utility to retrieve XML data in one file.<HR></BLOCKQUOTE>
Czesc Maciek,
There are some good examples with XSQL Servlet. From what I understand you have one XML file and you need to save a portion of document in relational tables and other portion in CLOB.
Yes, you can do that.
You can do it many ways. I can suggest (2).
1. Use the views
2. call your java procedure that will do
the xml processing, brake it down and insert
releval frogments into different tables/columns
null

Data Rules, error and shadow tables - what is best?

Hi there
I'm new to OWB and have to create cleansing mappings whihc will take data from a staging table and put it to a cleansed table. We wish rows which fail the cleansing process to automatically be logged to an error table which is a identical to the cleansed area except with the addition of a error message field.
In the mapping I put the name of the error table in the error table property of the target cleansed table but it didn't put the row failing the not null constraint to the error table. When I executed the mapping via the Control Center it completed with warnings but didn't capture this row.
Additionally when cleansing records we wish to check the ultimate target area to check if records exist in certain tables. The problem is that since our targets have history the primary key of these tables is say code and effective date, therefore because we need to do a partal match we can't use foreign key constraints. I'm thinking we could only do this by creating a mapping manually.
Any help/guidance on best practice
Many Thanks

Welcome to iLife 06,
This is a major problem, and you'll notice that this discussion area is ripe with users like you and I who are furious over this. Apple has just orphaned Homepage.
Here's a thread where we were discussing it and some people posted work arounds. Notice that this thread has been locked! The only locked thread I've ever seen on an Apple board. What's that all about?!
http://discussions.apple.com/thread.jspa?threadID=331564&tstart=0
Share your concerns directly with Apple. Let's hope that an upgrade or batch comes out soon that re-enables Homepage or that at least provides some way to migrage the pictures over. I have 100s of such pictures, now orphaned.
Best,
- Seth

Master data about P and M table

Hi,
i have a problem.
This infoobject Material have 2 Display attributes. Price and Saleperson.
In the View table /BIC/MZ_MATER I could see the values for the both attributes.
In time independent table /BIC/PZ_MATER i could see the two attributes fields, but when i have a look at table contents, there is only vorhand for the value of Attribute Price. The value for Saleperson i cant see.
I try to look at another Infoobject,which has the attributes. Why i can see only one attributes values, the others cant be seen.
Why?
thanks.

Hi,
Did you execute the change run for your InfoObject Material? It could be something missing on that point.
Check the data in P table filtering by Active records.
Regards, Federico

No data in cube,but there is data in F and E table, also in dimension table

Similar Messages

Maybe you are looking for