No dimensions available for selection in Query Wizard

Good afternoon. I have created some presentations in JDeveloper and am quite happy with the results thus far. However, I recently began working with Reports and have stumbled across an error for which I may be responsible.
I had no problems whatsoever in JDeveloper. When trying to create a query in Reports, there are no dimensions available for selection, only measures. I researched this somewhat and ran across the statement in the OLAP API docs that states the creation of 'measure folders' in the OLAP DB is necessary in order for that information to become avaiable elsewhere.
I believe this hypothesis is correct because (please ocrrect me if I am wrong) JDeveloper uses JDBC to connect with OLAP by default. However, I believe that Reports uses the OLAP API.
The reason I am not 100% certain that this is the culprit, is the fact that I am still able to see the measures; just that when I select the measures, there are no dimensions associated with them (which thereby prohibits me from proceeding in setting up the query).
Has anyone else seen this behavior, and is it caused by not having measure folders setup? Thanks.
-Jeff Trudeau

Np. I am running the 9.0.3.4 maintenance release of JDeveloper and the corresponding release of BIBeans. As for Reports, I am running the version that was included with the latest 9i Developer Suite (release 2). I am not aware that a more recent version of Reports has been released.
I am running a 9i database with the latest patches. Again, JDeveloper with BIBeans is working fine, but the problem lies in setting up a query in Reports. Thanks for the help.
-Jeff

Similar Messages

Item availability for selected items and directly create the delivery

Hi All,
For a very big sales order ..lets say having 700 line items ...is there any convenient way to create the delivery for selected items ..e.g. 30-40 line items rather going and selecting the line items then doing the item availability.
do you have any LSMW format by which we can do the item availability for selected items and directly create the delivery.
kindly Guide me..
With Regards
Azeez.Mohd

Hi ,
There is no stand way of doing it . You need to take help of abaper to do this :
1. Create a t code where if you give sale order number , it displays a report with all the items with a check box near to it as we see in SE16 .
2. This report could be best in ALV form where users can do "ctr+f" and search only the required materials then select those lines and press a button on the top of report .
3. Once the button is pressed , program will run vL01n ( create delv in backgrnd) in a BDC form . At time of delev creating , the bdc program in backgrnd uses only those items which were selected by user and not the other items .
4. Program will create a delv using a BDC in background and return the delv number for user to view tht.
U can also try using FM : RV_DELIVERY_CREATE to create delv in backgrnd after user selection if BDC is getting tricky.
Hopefully ,this shuld work and will be a easy process for the customers.
Let us know the outcome .. .
B O L ..
Hope this Helps !!!

RFC to JDBC "No messages available for selection"

Hi Guys
I am testing my RFC to JDBC scenario, and on sxmb_moni I get error: "No messages available for selection"
on SE37 I have ran my RFC with a data.
On SM59 I created and test my RFC destination its working fine, on the SM58 no errors, I am using
BAPI_BANK_GETLIST as my sender and my DataBase table (SQLServer) is my receiver
On my MM I have set access to constant INSERT
What am I not doing right?
Thanks
Yonela

Hi Guys
As Bruno have specified I decided to reverce my scenario now it JDBC to RFC Synch but now the problem I am facing with is that I dont get a response back. I want it to return one field from my table.
I am using the BAPI_BANK_GETLIST and BAPI_BANK_GETLIST.Response, SQL Server as my database server.
On my http://xxxxx:50000/mdt/channelmonitorservlet the JDBC sender is working fine but when testing the RFC Receiver I get the below error and went through lots of blogs still no luck.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
On my sxmb_moni my fllag is black and white which is what I wanted to see.
Your suggestions will be helpful,
Thanks
Yonela

Output does not match data sheet as only 1 report was available for selecti

Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

You will need to provide much more detailed information before anybody can help.
Cheers
John
http://john-goodwin.blogspot.com/

New custom field in MCVBAK not available for selection in RSA5

I added a custom field to the communication structure MCVBAK. When I go to RSA5 and select the Maintenance button to select it, it is not visible in the list. Do I need to do something other than add to MCVBAK to make it available for selection?
Thanks.

Hi Boater,
Have you included this new field from MCVBAK in the extract structure from LBWE T-code? If you haven't, you need to do this and it will be available in RSA6. Hope this helps.
Thanks and Regards
Subray Hegde

Software metering date not available for selection sccm 2012

Hi
I have installed SCCM 2012.
While viewing a report for software metering date and year are not available for selection. they are blank.

thaks
I is showing after restart.
Now there is another problem.
When I see the software metering report for enabled rule i.e. KasperskyAdminKit I can not understand the figures
Computers that have run a specific metered software program
NetBIOS Name
Installed Site Code
Last Usage
Total Usages
Average Usages per Day
Total Duration (min)
Average Duration of Use (min)
Average Duration per Day (min)
WIL-WNR-AV
PUN
11/16/2012 5:13:35 PM
1
0.03
7384.27
7384.27
246.14
How to know the the explanations for the underlined items ?

Rule based monitors (RZ20) - Show system availability for selected systems

Hi experts,
I'm new with CCMS monitoring and need an advice for rule based monitors.
I want to create three alert monitors (RZ20). One for our developing systems, one for our quality assurance systems and one to monitor our production systems.
For the start, I want to show data in each of this monitor for free space of the filesytems (MTE class: "FilesystemFreeSpace"), for users which are locked out (MTE class "R3SyslogSecurity") and for the availabilty of the ABAP systems (MTE class "Availability_SysPercent_ABAP").
I started to create the monitor for our developing system and got a problem. I started with the rule "CCMS_DEFINE_R3_SYSTEMS" to select our developing systems "HRT", "CRT" and so on. Under this nodes, I defined the mte classes ("CCMS_GET_MTE_BY_CLASS") which needs to be shown: "FilesystemFreeSpace", "R3SyslogSecurity" and "Availability_SysPercent_ABAP".
When I checked the results, I was able to see the free space of the filesystems and whether a user has been locked out. Unfortunately, I recognized that the availability is not shown. Instead there is the message "No MTEs currently available".
I'm aware, the availability cannot be shown on this way, since the agents are part of the central monitoring system and hence i need to choose the central system for "CCMS_DEFINE_R3_SYSTEMS". However I'd like to show the availability separated for each system under "HRT", "CRT" and so on. That means for example, there should me a node "HRT", which contains the free space of the filesystems, whether users are locked out, and the availability for the system.
It's not a problem to get a solution with a static monitor. I simply create a virtual node "HRT" and tick the checkbox under "<central system>, ..., <availability>, <hrt> ..."
However, I'd like to use rule based monitor to keep the effort at a minimum by not ticking thousand of check-boxes when I expand the monitored objects.
I also tried to use the rule "CCMS_GET_AVAILABILITY_FOR_SYSTEM", but it doesn't work and SAP documentations say "This rule is reserved by SAP for later use".
Does anybody know a solution for my problem?
In addition, I've got one more question concerning rule based monitors: If I want to create a monitor for my developing systems, I'll not be able to choose "<all>" for "CCMS_DEFINE_R3_SYSTEMS". Do I need to create "CCMS_DEFINE_R3_SYSTEMS" for each system separately? Or is there another possible way?
Thanks for your help in advance.
Bob
Edited by: Bob Norwich on Oct 17, 2010 12:04 PM
I read something about logical MTE classes: http://help.sap.com/saphelp_nw04s/helpdata/en/31/5462405c910272e10000000a155106/frameset.htm --> Does I need to use this?

Sorry Sean for my very late anwser.
I was very busy in my company.
Yes, I had tried you suggestion but it didn't work for me.
The problem is, that the Agent "CCMSPING" is part of the central monitoring system by definition.
Furthermore I tried to copy the default availabiliy monitor to look how it is definied. It didn't help.
I made the decision to define my monitor differently (an extra monitor for the availability for all system) and replace this temporalily solution when ""CCMS_GET_AVAILABILITY_FOR_SYSTEM" will be available.
The situation is not so bad after all.
Thx for your help. I appreciate it!!
Bob

Creating InfoPackage: Data Targets not available for selection. Any hints?

Hi,
I have 5 ODSes which by design are to feed a 6th ODS. I created 5 update rules, using each of the 5 ODSes, separately as infosources.
The problem is that under the Infosource tree, I see the system generated InfoSouce but while creating the Infopackage, under Data Targets tab, my 5 ODSes are not available. Infact, it gives me no data targets for selection.
Any hints on what I might be missing in the steps?
Thanks

hi Amanda,
say you have zods1 to zods6, and zods6 is feed by zods1-zods5,
under infosource tree, you create infopackage from which ods's generated infosource ? i guess zods6,
then yes you wont see any ods in data target, since zods6 has no further update to any data target,
you will see zods6 in generated infosource of zods1,zods2,zods3,zods4,and zods5.
you won't see all zods1-zods5 in one infosource unless they have update rules for all zods1-zods5 with same infosource.
you will need to go one by one infosource for each ods's infosource.
hope this helps.
note : it seems recently you only reward 'solved' for the last reply, please note you can reward more than one star

Hierarchy not available for selection

A new hierarchy is created in R/3 for the 0Customer,but is not visible in the RSA3 for selection ? is there anything else to be done to make it available under selection?
-Sourav

Hi,
If you created a custom hierarchy based on sets then go to GS03 and check whether they exist and go to BW07 and check have you created a DataSource for it and the DataSource active.
Then Go to RSA3 and check.
Hope This Helps,
regards,
rik

OWB - making cubes / dimensions available for Disco OLAP

** Posted on the OWB forum initially but no replies **
Hi, can someone explain (or tell where I can find documentation on) deploying cubes and dimensions for viewing in Disco Plus OLAP ?
I have already derived other unrelated tables/views to business areas and have setup the security on those for Disco with no problem.
The cubes and dims are defined as ROLAP and there is data in the underlying tables. I have granted SELECT access on the underlying tables to the required users. The dims and cubes have been deployed with the "Deploy All" setting
If I log on as the eul owner into Disco Plus OLAP I can see the dims, cubes, measures and data with no problem, however if I log on with one of the other users I can log on ok (so no issues there) but have no objects to select from.
I think the issue is to do with access not being granted to the new users to the relevant OLAP objects but do not know which ones.
Thanks
Paul

Sorry folks, I got mixed up with another thread running somewhere else.
With ROLAP, all you should need to do is grant select on all the dimension and cube tables. The metatdata for these tables is owned by OLAPSYS and stored in various tables starting with CWM_XXXX. Assuming your Disco user has been granted the role OLAP_USER (which should happen by default, and you confirmed this in a previous part of this thread) then everything should work.
This might be caused by the CWM catalog not being up to date in terms of all the required metadata. Try connecting as the OLAPSYS user and then execute the following command
exec CWM2_OLAP_METADATA_REFERESH.MR_REFERESH
Once this has finished you might find that you cannot connect to Discoverer. This will be because the sample ROLAP schema owned by SH gets corrupted during installation and this can cause problems with the OLAP metadata. The only thing to do is to use the OLAP PL/SQL packages to delete the dimensions/cubes owned by SH then re run the command to refresh the metadata catalog - > CWM2_OLAP_METADATA_REFERESH.MR_REFERESH
Security - You need to use the normal database label security with a ROLAP implementation as the AW PERMIT command is not available with ROLAP.
Keith

System not available for selection in Maintenance Optimizer

Hello,
When planning the maintenance in MOPZ I choose product version and the system displays a list of systems assigned to the Product Version. However, the list only shows one of the two systems assigned to the logical component (prod system). I have looked at the logical component in SMSY listed under SAP ERP -> SAP ECC Server -> Z_SAP ERP and both systems are listed and are "green". A Consistency Check of the logical component shows no errors.
Any ideas are helpful, thank you.

Hello,
There is no 'display filter' on the screen you are referring to, Change Management -> Maintenance Optimizer -> Create New Maintenance Transaction. This is the initial screen of the maintenance transaction where it shows the 5 steps of the maintenance transaction. The following selectable fields are available:
Priority
Short Text
Product version
When I make a selection for the product version an additional selectable table is available where I can select the systems. I should be able to see all the systems assigned to the logical component, however I only see one of the two systems.
I have checked two other Solution Manager systems and there is no 'display filter' or 'hide filter' button either.
Regards,
Robert

ALV Grid: Cell not available for selection

ALV GRID.
How can I make a cell(or an entire column) not available to be selected?

I was able to forbid users to click on cells that has got null values by:
a) declare the column as hotspot when you are building the fieldcatalog (fieldcatalog-key = 'X')
b) inside the form "user_command", after reading the data inside the internal table, use something like:
if wa_it_alldata-accounting_doc_nbr ne space.
processing logic
endif.
wa_it_alldata would be the internal table and can be prefilled by something like:
read data table, using index of row user clicked on
READ TABLE it_alldata_f INTO
wa_it_alldata INDEX rs_selfield-tabindex.
A more extensive eg can be found at: http://www.sapdevelopment.co.uk/reporting/alv/alvgrid.htm
Let us know if you still have the problem.
Rajib

Rescue and Recovery: No backups available for "local hard drive" with Full Restore

I can see all my backups in "view all backups" and can restore individual files, although when I select the option for "full restore", it reboots my PC and brings up the Rescue and Recovery interface which gives me the option for "full restore". When I select "full restore", it asks me to select the source.
As my backups are stored on my local hard drive, I select that source, however the scroll box is empty (no backups available for selection).
Can anyone recommend a solution to fix this problem, or should I remove and re-install Rescue and Recovery, then create new backups (and hope they appear in the list for full restore)?
I am running Rescue and Recovery 4.21.0016.00 on a Lenovo T61p with XP SP3.
Thanks.
Gary Grathen

Also, I have RnR 4.00.0117.00.
Where do I find and how do I delete these massive files?
Note from Moderator: Please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you.
Message Edited by nonny on 04-24-2008 02:15 PM

Delta field not enabled for selection in generic data source

Hi
I have created a generic data source for the table VBFA....and for the delta pick up i have put the delta option as CALDAY on the field ERDAT...and i have selected that field for the selection option. but after i made it delta enabled the selection option got disabled.
Now when i check the info package delta selection tab that date column is not apperaing.
But when i have to run the info package for the first i dont want all the data as it has a huge set of data.
I wanted to take only this months data.
So is there any option to be set to enable this selection in info package.
please suggest.
Regards
Shilpa

Hi there,
That's the stardard behaviour. If you use delta based om ERDAT, that field won't be available for selecting.
You could for example try to build a view over VBFA, and let the field ERDAT there and another field, for example ZERDAT (that is just another alias for ERDAT). Create the delta based onyour view over the field (ERDAT), but you can still control the restrictions over the extractore with your ZERDAT.
I don't know if this is possible, this is only an assumption.
Another option could be first to create an extractor based on the table VBFA but without delta, that field ERDAT would be available. Do your full data restricting it, and after that, change your datasource to use deltas based on ERDAT. It will be unavailable than, but since you've already loaded previous full data, you could than use your delta like it is. But here, remember, your deltas will bring new and change data based on ERDAT. If it brings delta based on changed data over ERDAT to a record that you didn't brought over your full (only some data), it will be incorrect records.
Also just an assumption, did not try it.
Diogo.

F4 Help for Selecting a File in WD ABAP

HI,
What is the method, or FM that is available for selecting a file in WD ABAP.
   method FILE_OPEN_DIALOG is not working as it required GUI.
Thanks
Mahesh

Hi ,
THIS SHOULD UR PROBELM
data: ifiletable type filetable.
data: xfiletable like line of ifiletable.
data: rc type i.
selection-screen: begin of block blk with frame title text-001.
selection-screen : skip 1.
parameters : u_file like rlgrap-filename.
selection-screen : skip 1.
selection-screen : end of block blk.
initialization.
h_repid = sy-repid.
at selection-screen on value-request for u_file.
call method cl_gui_frontend_services=>file_open_dialog
   EXPORTING
     WINDOW_TITLE            =
     DEFAULT_EXTENSION       =
     DEFAULT_FILENAME        =
     FILE_FILTER             =
     INITIAL_DIRECTORY       =
     MULTISELECTION          =
    changing
       file_table              = ifiletable
       rc                      = rc
     USER_ACTION             =
   EXCEPTIONS
     FILE_OPEN_DIALOG_FAILED = 1
     CNTL_ERROR              = 2
     ERROR_NO_GUI            = 3
     others                  = 4
if sy-subrc eq 0.
    read table ifiletable into xfiletable index 1.
    if sy-subrc = 0.
      u_file = xfiletable-filename.
    endif.
else.
endif.
start-of-selection.
clear : file ,count.
move u_file to file.
call method cl_gui_frontend_services=>gui_upload
    exporting
      filename                = file
      filetype                = 'ASC'
    HAS_FIELD_SEPARATOR     = SPACE
    HEADER_LENGTH           = 0
    IMPORTING
    FILELENGTH              =
    HEADER                  =
    changing
      data_tab                = i_text_file[]
    exceptions
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      others                  = 17
if sy-subrc <> 0.
           MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_text_file ..
Thanks
Venki

No dimensions available for selection in Query Wizard

Similar Messages

Maybe you are looking for