No disk found error while install Solaris 8 intel on Compaq
I use the interactive installation method to install Solaris 8 02/02 intel platform on Compaq DL380 G2 with 4*36.4 GB harddrive and 2G memory. After I configue the network and time, an error message comes up: "No disk found. Check to make sure disks are cabled and powered up."
When I try the Web Start, it will jump the the shell prompt and say something like "No location for installation software ...."
Could anyone give me some clue? Thanks.
Dir Mr. zhechang,
We had the same error with you, but we install Solaris 9 on the DL380 G3 Compaq machine. Could you please help me to solve the errors if uou the solution about it
Thanks and best regards,
Nhut Pham
Similar Messages
-
Error while installing Solaris 10 using Solaris CD
I'm getting an error while installing Solaris 10 in an Ultra 10 box.
I have Solaris CDs (Total 4) and I have installed Solaris 10 in a Ultra 250 box , I did not get any problem. That means CDs are fine.
But when I try to boot the CD 1 from bootPROM mode by giving the following command
ok boot cdrom
I get the following error :
rebooting with CD command boot cdrom
boot device : /pci@1f, 0/pci@1 , 1/idi@3/cdrom@2 ,0:f file and args
Cant read disk label
Cant open disk label package
evaluating : boot cdrom
Cant open boot device
Then the box boots up with Solaris 8 which it has now..
Can anyone please help me to solve this issue ?
ThanksWith the above information , I just wanted to tell you that the CD rom is getting detected as i can view all files in the CD.,,
-
FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1
FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
when this is extracted it leaves me with Disk1, 2, and 3
install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
i even triwd the same download from edelivery.oracle.com and gives the same madness
am stuck.i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
error reads :
-error cheching the existence of the SYSMAN user in Management repository
-exception occured while connecting to database . please check the connection details you specified and retry
-io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
REP DB HOSTNAME:SA-OMS-01
PORT:1521
SERVICE/SID:OMSDB01
SYSMAN PASSWORD:PASS
THE REST I PUT PASS AS PASSWORD
NOT SURE WHAT TO DO NEXT. -
Disk Access Failed while Installing Solaris Container.
I have setup 5 guest domains together with the Control Domain.
$ ldm list
Name State Flags Cons VCPU Memory Util Uptime
primary active -t-cv SP 4 4G 0.8% 2d 2h 15m
secondary active -t--v 5000 4 2G 0.5% 3h 5m
dmz active -t--- 5001 8 2G 0.0% 46m
sunray inactive -----
application inactive -----
identity active -t--- 5002 4 4G 0.1% 1h 2m
In each of the guest domain, I plan to install a number of Solaris Containers to run different applications. While installing one Solaris container (zoneadm �z <zone name> install) in dmz domain, I start the installation/configuration (either zoneadm �z <zone name> install or zlogin �C <zone name>) of another Solaris container in identity domain. Everything starts OK until half way I get an error message as follow:
Jun 13 18:33:16 dmz vdc: NOTICE: [1] disk access failed.
The installation of the Solaris Container in dmz halts as soon as I see the message above. Nothing will work except a force stop in the Control Domain using ldm stop �f dmz and restart.
What happen to the Solaris Container installation/configuration in identity domain? It either continues the process without error or fails with the same error message shortly after. For example,
Jun 13 18:33:24 identity vdc: NOTICE: [1] disk access failed.
The vdisks for each guest domain are setup by following the steps on section �Using ZFS Over a Virtual Disk� in LDoms 1.0 Administration Guide. Each guest domain is booted from a disk image in the Control Domain and has two 9GB data vdisks (mapped to two physical 9GB disks on A5200 disk array) running ZFS striping. Each guest domain vdisks are serviced by a separate vdisk server.
Any idea?I am not sure if multiple virtual disk servers are officially supported under current LDoms release.
I had tried using only one virtual disk server. The same problem exhibited. I thought may be the vds was not able to keep up with the virtual disk I/O. That's why I setup multiple vds. -
File Not Found Error while installing
I am using Win 7- 64, downloaded Oracle 11g R2.
my problem is while i am installing i am getting this error dialogue boxes repeatedly
File Not Found
F:\app\Poojaries\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
Giving options with
Abort Retry Continue
i proceeded with Continue, i got many errors like that , even i completed with clicking continue.
Installation completed.
While i am trying to login with Username and Password, it giving an error
ORA - 12560 TNS : Protocol adapter error.
Even i tried login with DBA also it not working
Waiting for solution..
Thank you94ca1f3c-5ca1-4c06-9858-513a0c7e2e15 wrote:
I am using Win 7- 64, downloaded Oracle 11g R2.
my problem is while i am installing i am getting this error dialogue boxes repeatedly
File Not Found
F:\app\Poojaries\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
Giving options with
Abort Retry Continue
i proceeded with Continue, i got many errors like that , even i completed with clicking continue.
Installation completed.
While i am trying to login with Username and Password, it giving an error
ORA - 12560 TNS : Protocol adapter error.
Even i tried login with DBA also it not working
Waiting for solution..
Thank you
Why would you expect logging on to work when the fundamental installation failed and you chose to ignore the failure?
As pointed out, there were two zip files, and the contents of them have to be 'merged'. There was a comment about the on the page from which you downloaded those two files. And here's a hint: If you are wedded to the Windows GUI, when you click on a zip file and choose to unzip it, it will be unzipped into a newly created folder with the same base name as the zip file. Thus zip file 1 unzips into folder 1 and zip file 2 unzips to folder 2, leaving you with copy all of the contents of one into the other.
There is a cleaner way, and that is to learn to use a command line.
- open a command prompt (cmd.exe)
- change directories to the directory where your two zip files are located.
- issue the 'unzip' command, specifying file 1 ('unzip V17530-01_1of2')
- issue the 'unzip' command, specifying file 2 ('unzip V17530-01_2of2')
Done. You will have two directories, one named 'database' and one named 'grid'. The 'database directory will be the 'merged from two directories' directory. -
"No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b
Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi. -
Error while installing on Solaris 10
Hi
i am getting following error while installing weblogic server10.3.1 on Solaris 10.
+Installation fails with Fatal error encoutered during self-extraction. Click Yes to exit, No to continue as a Net installation.[No space left on device] message.+
I tried redirecting it to new local temp folder but it didn't helped.
Please help.
Thanks
Chinmay
Edited by: user12143775 on Nov 13, 2009 8:53 AMHi Vijay
I can see a constarint on / and /dev directory.Rest Of directory has a lot of available space.Can this cause the problem.
Filesystem size used avail capacity Mounted on
/ 2.0G 1.6G 371M 82% /
/dev 2.0G 1.6G 371M 82% /dev
/lib 59G 8.3G 50G 15% /lib
/platform 59G 8.3G 50G 15% /platform
/sbin 59G 8.3G 50G 15% /sbin
/usr 59G 8.3G 50G 15% /usr
/usr/local 30G 2.3G 26G 8% /usr/local
/usr/openv 6.0G 3.1G 2.8G 53% /usr/openv
proc 0K 0K 0K 0% /proc
ctfs 0K 0K 0K 0% /system/contract
mnttab 0K 0K 0K 0% /etc/mnttab
objfs 0K 0K 0K 0% /system/object
swap 102G 392K 102G 1% /etc/svc/volatile
/platform/SUNW,T5240/lib/libc_psr/libc_psr_hwcap2.so.1
59G 8.3G 50G 15% /platform/sun4v/lib/libc_psr.so.1
/platform/SUNW,T5240/lib/sparcv9/libc_psr/libc_psr_hwcap2.so.1
59G 8.3G 50G 15% /platform/sun4v/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
swap 102G 48K 102G 1% /tmp
swap 102G 48K 102G 1% /var/run
3.24.144.10:/vol/preprovis_88
25G 972M 24G 4% /u01
Thanks
Chinmay -
Linking error while installing Oracle10g on Solaris 10 64bit sparc
Hi,
I am getting following error while installing the Oracle 10g R2 on Solaris 10 64 bit sparc.
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/data/Oracle/product/10.2.0 EXENAME=proc/Linking /data/Oracle/product/10.2.0/precomp/lib/proc
ld: fatal: file /data/Oracle/product/10.2.0/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /data/Oracle/product/10.2.0/precomp/lib/proc
*** Error code 1
The following command caused the error:
echo "Linking /data/Oracle/product/10.2.0/precomp/lib/proc"; \
rm -f /data/Oracle/product/10.2.0/precomp/lib/proc; \
/usr/ccs/bin/ld -o /data/Oracle/product/10.2.0/precomp/lib/proc -L/data/Oracle/product/10.2.0/precomp/lib/ -L/data/Oracle/product/10.2.0/lib/ -dy /data/Oracle/product/10.2.0/lib/prod/lib/v9/crti.o /data/Oracle/product/10.2.0/lib/prod/lib/v9/crt1.o /data/Oracle/product/10.2.0/lib/s0main.o /data/Oracle/product/10.2.0/precomp/lib/pdc.o /data/Oracle/product/10.2.0/precomp/lib/pds.o /data/Oracle/product/10.2.0/precomp/lib/libproc2.a /data/Oracle/product/10.2.0/lib/libslax10.a /data/Oracle/product/10.2.0/precomp/lib/libpgp.a -lpls10 -lplp10 /data/Oracle/product/10.2.0/lib/libplc10.a -lsnls10 -lunls10 -lnls10 /data/Oracle/product/10.2.0/rdbms/lib/kpudfo.o -lclntsh `cat /data/Oracle/product/10.2.0/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /data/Oracle/product/10.2.0/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /data/Oracle/product/10.2.0/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /data/Oracle/product/10.2.0/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /data/Oracle/product/10.2.0/lib/sysliblist` -R /opt/SUNWcluster/lib/sparcv9:/data/Oracle/product/10.2.0/lib:/opt/ORCLcluster/l ib/ -Y P,:/opt/SUNWcluster/lib/sparcv9:/opt/ORCLcluster/lib/:/usr/ccs/lib/sparcv9:/usr /lib/sparcv9 -Qy -lc -laio -lposix4 -lm /data/Oracle/product/10.2.0/lib/prod/lib/v9/crtn.o; \
/bin/chmod 755 /data/Oracle/product/10.2.0/precomp/lib/proc
make: Fatal error: Command failed for target `/data/Oracle/product/10.2.0/precomp/lib/proc'
from make.log
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'relink' of makefile '/data/Oracle/product/10.2.0/precomp/lib/ins_precomp.mk'. See '/data/Oracle/oraInventory/logs/installActions2007-07-01_12-14-33AM.log' for details.
Exception Severity: 1
any help would be appreciated!
Thanks,
-Prakashits working now...I replaced ld on my system
previous ld version was
GNU ld version 2.13.1
Supported emulations:
elf32_sparc
elf64_sparc
now ld version is
ld: Software Generation Utilities - Solaris Link Editors: 5.10-1.477 -
Page not found Error while open install app
I go through the all necessary steps to configure app domain & steps to create SharePoint hosted app still got 'page not found error'
The final app URL that i got afte r open install app -"http://app-125e72eedbe144.domain name:9922/FirstApp/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fsp1%3A9922&SPLanguage=en-US&SPClientTag=6&SPProductNumber=15.0.4420.1017&SPAppWebUrl=http%3A%2F%2Fapp-125e72eedbe144.domainname%3A9922%2FFirstApp"
i don't understand where i did mistake can any one help me to resolve that issue.Hi,
According to your post, my understanding is that you get the “page not found” error while you open install app.
You need to have a SharePoint Web Application that is bonded to port 80 without a host header.
If you want to run it on https (SSL) then you also need to add an extra binding for SharePoint Hosted Apps to work.
For more information, please refer to:
Troubleshooting SharePoint 2013 Hosted Apps on-premises: “404 not found” error
404 & 401 Errors with the App Management Service - SharePoint
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Error while installing network adapter driver on HP ML 370 G4
We have HP ML 370 G4 server. And I get an error while installing driver for embedded network adapter on Solaris 10.
I don't know what to do...
Can anybody help me??
# pkgadd -d /tmp/BRCMbcme.pkg
The following packages are available:
1 BRCMbcme Broadcom NetXtreme Gigabit Ethernet Adapter Driver
(i386) v7.5.12
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: 1
Processing package instance <BRCMbcme> from </tmp/BRCMbcme.pkg>
Broadcom NetXtreme Gigabit Ethernet Adapter Driver(i386) v7.5.12
Copyright (c) 2001-2003 Broadcom Corporation, Inc.
All rights reserved.
This product is protected by copyright and distributed under
licenses restricting copying, distribution and decompilation.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
6 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <BRCMbcme> [y,n,?] y
Installing Broadcom NetXtreme Gigabit Ethernet Adapter Driver as <BRCMbcme>
## Installing part 1 of 1.
/kernel/drv/bcme
/kernel/drv/bcme.conf
/usr/share/man/sman7d/bcme.7d
[ verifying class <none> ]
## Executing postinstall script.
("pci14e4,1644") already in use as a driver or alias.
postinstall: add_drv bcme failed
pkgadd: ERROR: postinstall script did not complete successfully
Installation of <BRCMbcme> failed.
#If you're sure that you have a Broadcom BCM57xx
device installed in the machine, then you should have a look at
"prtconf -pv" output, locate the Ethernet device, and check the
"vendor-id" / "device-id" property for the NIC.
If the Broadcom device is compatible with Sun's "bge" driver, you
can try to install an addition driver binding entry for your device,
using the update_drv(1M) command
update_drv -a -i '"pciVVVV,DDDD"' bge(where VVVV and DDDD is the pci vendor / device id found in
prtconf -pv output). -
Error while Installing Oracle Services for Microsoft Transaction Server
I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated -
Solaris10 Update 10 (08/11) No Disks Found error vm3.0.1
I have successfully installed Sol11 Exprress and Oracle Linux 6.1 in VM 3.0.1 using ISO method.
My setup includes iSCSI devices and a HA config.
However, everything I’ve tried with the newly released Solaris 10 R10 (08/11) it fails to finish installing with a No hard disks found error and the install aborts.
I’ve tried Xen HVM and HVM PV Drives Domain types with same results.
Has anybody been able to install this release of Solaris in OracleVM 3.0.1?
Edited by: user10052240 on 22-Sep-2011 9:47 PMStill no luck, I get through the installation until it asks about CDROM media, then I get a pop up window with the "No Disks found" eror, after that the install exists to xterm window.
Here's my vm.cfg in this instance I did not change xvd to hd as all my attempts to change this cause vm not to boot.
-thanks for any advise.
memory = 2048
disk = ['file:/OVS/Repositories/0004fb0000030000914c5da5cda46bfc/ISOs/0004fb0000150000cb99f253bbdcfffc.iso,xvda:cdrom,r', 'phy:/dev/mapper/3600144f0e863c90000004e7d4b5f0002,xvdb,w!', 'file:/OVS/Repositories/0004fb0000030000914c5da5cda46bfc/VirtualDisks/0004fb000012000049d780014c3c21d4.img,xvdc,w!']
vif = ['mac=00:21:f6:00:00:04,bridge=192.168.0.0']
usbdevice = 'tablet'
on_crash = 'restart'
OVM_description = ''
name = '0004fb000006000092cffa6918b35871'
builder = 'hvm'
on_poweroff = 'destroy'
boot = 'dc'
uuid = '0004fb00-0006-0000-92cf-fa6918b35871'
vfb = ['type=vnc,vncunused=1,vnclisten=127.0.0.1']
on_reboot = 'restart'
vcpus = 2
cpu_weight = 27500
OVM_os_type = 'Oracle Solaris 10'
cpu_cap = 0
OVM_high_availability = True
maxmem = 2048
OVM_simple_name = 'sol10r10'
guest_os_type = 'default' -
Error while installing 10g on oracle unbreakable linux
hi all
Oracle 10.2.0.1
oracle unbreakable linux
I got the following error while installing oracle database 10g on oracle unbreakable linux
when my installer peforming product specific prerequiste check i got the warning
checking operating system requrement
checking for gcc-3.2; found not found Failed<<<<<<
I tried to search gcc-3.2 on my linux cd but its not there
can anyone please tell me from where can i install this?
thanksWhich gcc is in your CD? List them all.
And yes, they are there. Unless someone gave you a rescue disk or stripped down live CD, in which case you need to thank the person who gave you that appropriately.
You need to search the CD/DVD and you need to learn how to install RPMs. Both can be learned by intelligent internet searches.
Edited by: Hans Forbrich on Sep 19, 2009 10:37 AM -
Error while installing oracle 10g on AIX
I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl helpHi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios -
Error While Installing IDES ECC6 with SQL Server 2005
Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.
Maybe you are looking for
-
After the last update is no longer contact to the internet or to whatsapp? What can I do with my iphone 5?
-
Process to populate the new field added by AET in Sales Order item
Hi We are on CRM 7.0 , EP1. I have added a new field in Sales order item view (UI comp : BT115IT_SLSO , View :Items). The field is called MTO (made to order), it should be populated based on settings in material master. I would like to know how can
-
Best solutions for my imac?
Ok so, recently my imac has been messing about. its decided it doesnt want to read any discs at all. Luckily, i had to have it sent into apple due to the recall of the seagate harddrives, and so i asked them to check my disc drive for me, to see if i
-
I click on new tab and it wont open
I click on the + for a new tab and nothing happens no new tab.
-
New bug in the latest update 12.2
Hi, the latest after effects doesnt save audio output settings. It always revert back to 8.000 khz for sound quality Is this something others are experiencing as well ?