No encoding occurs in "Project info" window

Can anyone explain why no encoding seems to occur in the "Project info" window? I have a small project with a single "Asset," a .mov file. To the right under "Encoding" is an empty progress bar region. Even when I save the project as a disc image, there is no activity in this region. Looking at p. 342 of David Pogue's "iMovie '09 & iDVD," the graphic suggests that these assets should be encoded.
Jim

Identical Problem.
In addition , the pulldown menu in Advanced, is partly grayed out, "Encode in Background" is grayed out and not active. If I remember correctly this is what allows all assets to be encoded before burning the actual disk. A tell tale sign it is working is when your project file becomes huge on your hard drive.
trying to Burn a disk just goes no where for a long time, then eventually spits out the blank DVD....
Tried DVD+R, then tried DVD-R with no luck on either type of blank disk.
Also, in the Project Info window, the assets are also grayed out, and no progress ever occurs in the Encoding progress bar.
The Project file is fully functional and all the assets are accounted for and working.
Any help appreciated
Message was edited by: donaldo777

Similar Messages

  • No option in project info window for code signing Provising profile.

    Dear Developer forum,
    I have one issue wth my application regarding provisional Profile.
    I have installed Distribution certificate.After that I have entered all information regarding distribution provisional profile in program portal
    I have got provisional certificate from portal.I have installed it
    And I have also seen its entry in home/library/mobiledevices/.
    But Now problem is arising at place when I am opening my project or target info window on that time in BUild->code signing option, I have only code signing endity but no code signing provisioning profile.
    where I can give my distribution provising profile name
    So anybody tell me howz it come????
    Thanks

    Looking at this page:
    http://developer.apple.com/iphone/manage/distribution/index.action
    Make sure that you've done all the steps... "Generating a Certificate Signing Request", "Submitting a Certificate Signing Request for Approval", "Downloading and Installing iPhone Distribution Certificates", "Create and download your iphone distribution provisioning profile"...
    When I went through this process, I think I forgot to do the step "Downloading and Installing iPhone Distribution Certificates"... (skipping straight to "create and download your iphone disbritution profile") as a result the provisioning profile name wasn't appearing for me to select... When I completed that step, then the provisioning profile name appeared...
    Message was edited by: iphonemediaman

  • Changing title in "project info" keeps titling DVD "My-Great-DVD"

    There was an unanswered topic by this name which has been archived so I couldn't respond to it.
    When changing the name of your DVD in the iDVD "project info" window, be sure to have NO SPACES or odd characters in the name. Letters, numbers, and underscores are OK. If you have spaces, iDVD should automatically replace them with underscores. However, if you already had a name, or once had the default name of "MyGreatDVD", and then change it to "The Name I Want", iDVD reverts to "MyGreatDVD" when burning the DVD, because it has underscores, which it likes, and "The Name I Want" does not have underscores, which iDVD doesn't like. If you replace "MyGreatDVD" with "TheName_IWant" (with underscores) your new name should stick.
    How many blank discs have you burned through trying to troubleshoot this?

    I have to say I have never had a problem with my own titles reverting to 'My Great DVD' when burned, but then, I haven't changed the title in Project Info either. However, the title in the Project Info is NOT the title I use when burning my movies to iDVD. I change the title on iDVD's main screen to whatever I want, and that is the title that is burned onto the disk.
    Where are you seeing the reverted title on your burned DVD?

  • I can no longer edit the info for my songs, movies and tv shows.  This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10.  Why will the program not allow me to access the track info to edit it?

    I can no longer edit the info for my songs, movies and tv shows.  This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10.  Why will the program not allow me to access the track info to edit it?

    Ah yes school boy error there out of frustration and discontent..
    My issue is with music/apps/films etc not downloading from iTunes / App Store.
    They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
    However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
    I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
    Anyways I digress.
    So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
    At frustration station waiting for a train from pain...
    All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
    Answers in a postcard :-)
    Much love

  • Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support.  Have tried reinstalling

    final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed.  Have tried reinstalling, default settings etc
    Appreciate suggestion, working on deadline. Thanks.  

    Here is the start of the crash report:
    Process:         Final Cut Pro [20568]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.1 (185673)
    Build Info:      ProEditor-185670300~1
    App Item ID:     424389933
    App External ID: 4138831
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [102]
    Date/Time:       2011-11-11 20:41:32.201 -0800
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          192058 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  157161 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
    VM Regions Near 0x280000003:
        CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM 
    -->
        STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL  stack guard for thread 0
    Application Specific Information:
    objc[20568]: garbage collection is OFF

  • Finder won't display folder size in "Size" column or Info window

    Normally, the Finder window will display a folder's size in the Size column. However, I have one folder which shows as "Zero KB" in the Size column. When I open the General Info window, the Size reads as "Zero KB on disk (Zero bytes) for 0 items."
    In order to get the folder size I have to go into the folder, select all folders (there's many), then with either the Summary Info or Inspector window, it'll show the folder size ("185.32 GB on disk").
    Why is this occurring in only this folder? Is it because it's a large folder or a folder with many subfolders?
    I'm running Snow Lep 10.6.2. The folder is on an external drive in FAT32 format. I've already tried deleting the "com.apple.finder.plist" file and rebooting.
    Thanks for any help.

    go to view menu->show view options and check the box 'calculate all sizes". then click "use as defaults".

  • Adding Engine component causes: "Compiler errors occurred when generating a Windows Forms wrapper...​"

    I got this error when I tried to drop a TestStand Engine class onto my main form in VisualStudio.NET.
    Compiler errors occurred when generating a Windows Forms wrapper for ActiveX control 'AxNationalInstruments.TestStand.Interop.API'
    The error message went on to say that it saved the source in ./obj/AxInterop.TS.cs so I added that to the project. When I try to build it, I get this error:
    The designer must create an instance of type 'System.Windows.Forms.AxHost' but it cannot because the type is declared as abstract.
    I am using TestStand 3.0 evaluation, Version 7.1.3088 of Microsoft Development Environment 2003, and .NET Framework 1.1 Version 1.1.4322 SP1.
    Is this aximp.exe problem?
    Can someone suggest how to fix this?
    Thanks,
    Jeff

    TestStand installs pre-built interop wrappers for the TestStand engine and all the TestStand UserInterface controls. You can find them in \API\DotNet\Assemblies\CurrentVersion\.
    However, the best thing to do is usually to add the ApplicationMgr control to your .NET form and then call form.axApplicationMgr1.GetEngine() to get the engine. Doing this automatically adds references to the interop assemblies to your project. You can find this control in the TestStand tab of your .NET toolbox when you have a form active.
    Ideally, you should start with the .NET simple operator interface examples which are in \OperatorInterfaces\NI\Simple\CSharp\ and \OperatorInterfaces\NI\Simple\VB.Net\
    - James

  • Close File Info Window

    I clicked File.File Info and a window opened that I can only maximize.  Can't close that window and get back to project. Does anyone know how to close the File Info window?

    It doesn't have this cancel button?

  • How to turn of floating popup info window?

    This is such a basic feature and I can't for the life of me find how to turn it off.
    How do I turn off the popup info window everytime i go over a clip in the project panel?

    You can't.  It's terrible.  File a feature request, please.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Project Info data

    Hi:
    Two things:
    1. I need to add a copyright legend to a manual, I though in putting it into the Info section of the Preference window, but the space is too small for it, is there a way to specify more characters for that field?. Then I change it to the Description field but it does not appear in the window.
    2. How can I make increase the info window width, because the Company's name is too long and the user need to use the scrollbars to see it complete.
    Thanks a lot
    Raq.

    Hi there
    The window may be hijacked and modified. But not from inside Captivate. You will need to export it to Flash and do it there.
    * If you have Flash handy
    * AND you know how to use it
    I've seen it done but can't tell you how as I'm not "Flash Savvy" quite yet.
    If you aren't Flash capable, Configuring a slide is probably your best bet. You might even want to create a Rollover Image or Caption or even a Slidelet to do that. You would then simply either configure it to display for the duration of the project or on each slide.
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • HELP: Burning double layer DVD does not work as expected by project info

    Hi,
    I have the following problem: I created an new project in iDVD and choose the following settings in the project info: Video-Modus=PAL, Coding=HighQuality, Format=16:9 and DVD-Typ=DoubleLayer. When I saved the project and open it again the project info dialog shows me the following amounts of used space: 1867 MB DVD-ROM, 4595 MB Diashows, 128 MB Menus, 0 MB Film, alltogether 6,48 GB and 200 minutes of duration.
    NOW: When I choose to burn the DVD it first tells me that I need to use a double layer DVD because the project is too large to be burned to a normal DVD. If I press OK (having inserted the DL-DVD), I am back in the standard iDVD editing mode. If I then have a look to the settings in the project info it is as follows: 3733 MB DVD-ROM, 4595 MB Menus, 128 MB Menus, 0 MB Film, alltogether 8,31 GB and still 200 minutes of duration. This obviously does not fit to the 7,7 GB DL-DVD so I cannot make iDVD to burn my DVD...
    QUESTION: What happend ? Why doubled the DVD-ROM space ? In fact what I can see is that there are several diashows doubled and even lots of picture more than once on the DVD. Could it be that there is a trash somewhere implemented ? I cut and pasted some of the diashows to a different place on the DVD...
    Thanks for answers and support.

    In fact what I can see is that there are several diashows doubled and even lots of picture more than once on the DVD.
    Do you mean "slideshows" instead of diashows?
    Did you add anything to the dvd-rom section of the DVD? If not, you may want to check this section to see what's going on.
    Also what does map view look like? Does it show anything that may have been duplicated?
    Please tell us your current ecoding settings.
    In other words, is the encoding set to Best Quality, Best Performance, or Professional Quality?
    Lastly, is this Dvd made up of of only slidesshows / images? Or did you also add a movie/s with actual video footage? And if so, what is the total playback / run time of this Dvd in hours and minutes? (keep in mind iDvd doesn't look at size/s but rather total QT playback in minutes; not to exceed 120 mins per SL Dvd-R and twice that amount for DL media).
    Message was edited by: SDMacuser

  • Project Information Window?

    How do I open the Project Information window in order to reorganize the memory? Where is the key command to open the project window?

    Additional Info to save time...
    In LPX using the default US Key Command Set.... you must assign a key to that Key Command to see the Project Info screen....
    LPX Menu Item..... Logic Pro X / Key Commands / Edit....
    Next... in the key Command edit window that will open.. search for Project Information...
    ...and then assign a key..
    I use the "Learn by Key label" method and then just press the key combo I wish to assign.
    The assignment I choose is SHIFT + OPT + CTRL + P  but you can assign whatever you like so long as it's not already used....
    In LP9 (Or the LP9 Key Command set if used in LPX)  the default Key Command is CTRL + D
    Note: In LPX default US Key Command Set...  CTRL + D is used for another key command.

  • Project information window always show

    Greetings,
    I published a Captivate project (a simple recording) as a
    Flash movie and it is used in an Authorware project. When the movie
    plays in the Authorware file, the Project Information Windows shows
    from the beginning and it never goes away, even when I click its
    close button.
    A similar question was asked in this forum in July 2007, but
    it was not answered.
    Any tip will be much appreciated!
    Thank you,
    Laurence

    Additional Info to save time...
    In LPX using the default US Key Command Set.... you must assign a key to that Key Command to see the Project Info screen....
    LPX Menu Item..... Logic Pro X / Key Commands / Edit....
    Next... in the key Command edit window that will open.. search for Project Information...
    ...and then assign a key..
    I use the "Learn by Key label" method and then just press the key combo I wish to assign.
    The assignment I choose is SHIFT + OPT + CTRL + P  but you can assign whatever you like so long as it's not already used....
    In LP9 (Or the LP9 Key Command set if used in LPX)  the default Key Command is CTRL + D
    Note: In LPX default US Key Command Set...  CTRL + D is used for another key command.

  • Cannot see Project Assets Window

    When I open certain projects, the Project Assets Window is no longer showing when I click on the arrow that is supposed to open the window. I've re installed twice, run ccleaner, and deleted the prefs file 2 times.  The window only opens on two project files and it no longer shows on new projects.

    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    And some other questions...
    •What are you editing, and does your video have a red line over it BEFORE you do any work?
    •Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
    •Which version of Quicktime do you have installed?
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    -If Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • Can you see a image in the Get Info Window?

    After upgrading to Mt LIon and while using CS6, I can't see image previews in the Get Info window.  Can't see images in the upper left corner of the get info window, so I can't make a selection and then do a copy- paste like I could do before I upgraded to Mt Lion with CS6.  I want to be able to paste a image of the subjects in my folders..  IE folder of Panda Bears would have a image of a Panda showing on that folder.  Folder of The Great Wall would have a image of the Great Wall on the Folder of Great Wall pictures.  This has always worked for the past many years I have used a Mac and Photoshop.  I started with Photoshop 2.  All my photo folders are represented by images so I have a good idea of what is contained in each folder.  Now after 2 weeks in China, 20 folders are represented by 10-11-12, 10-12-12, 10-13-12, 10-14-12 and so on.  Shows me nothing but dates.  I have tried saving as Jpeg, Tiff, and PAD, and still can't  do a copy-paste in the Get Info window.   Apple says it is a Adobe problem, Yesterday Adobe told me it is because I am uusing a Nikon D800 and Adobe does not have a  patcdh for the NEW Nikon camera.  I then tried using my Nikon D2Xs, Nikon D3X, Nikon 800 and even my wife's D50 and none of these camera allow me to copy paste the thumbnail image to the clipoboard like I have been able to do for YEARS...   I can see images in a folder in Bridge, but the images dont show in my desktop folders.IE, a folder on my desktop with 200 pictures only show with words/ numbers/letters NO IMAGES appear in the folders on the desktop.  On some folders the folders in a folder don't show up as Folders either.
    Can Any one help me.  Same thing happens on my MACPRO w 16 GB Ram and on my 17" MacBook Pro.

    Allan Sicks wrote:
    Thanks for your input.  Problem might be with the EASTER BUNNY..... have to have someone to blame.
    I can't blame you for saying that.
    Adobe is the clear owner of the responsibility to make functional their product that they claim is compatible with your operating system.  Adobe is the one who sold you the product.
    I just went looking for what Adobe has said about Mountain Lion compatibility, and they both list Mountain Lion as compatible and include such language as that on this page (emphasis mine):
    Adobe and Apple have worked closely together to test Adobe® Creative Suite® 5, 5.5 and CS6 editions and individual products for reliability, performance and user experience when installed on Intel® based systems running Mac OS X Mountain Lion (v10.8). Earlier versions of Adobe Photoshop® (CS3 and CS4) software were also tested with Mountain Lion and there are currently no known issues.
    I suggest that Adobe needs to get on the ball and get this fixed.  The time for user patience is over.
    If someone from Adobe is saying "Adobe can't fix it" then that someone is at the wrong authority level and/or is thinking on the wrong level.
    This is business and the business is making products that have value and are sold to people who perceive that value.  Adobe doesn't get to keep selling products that don't work while standing on principles that "it's someone else's problem".   Customers don't care why it doesn't work. 
    It's obvious to a child that if Photoshop CS5 can write the proper things to the Apple OS so that the thumbnails are visible, that there's something Adobe could do to fix it.
    But EVEN IF this were something only Apple could fix, that Apple hasn't fixed it yet says pretty loudly that Adobe isn't making the right overtures to Apple for their mutual benefit.  Adobe, are your executives so greedy that they can't grease a few palms of their friends over at Apple to put some priority on this?  What's the problem here?  Has Adobe actually forgotten how to do business?
    -Noel
    P.S., You should know that I don't use a Mac and am personally having no issues with seeing proper thumbnails and previews on my Windows 7 and 8 systems, since the software that does that isn't from Adobe.

Maybe you are looking for