No entries exist for the selection-FTR_EDIT

Hi Experts,
I created treasury deal in FTR_CREATE, after save the deal systems is prompting Message express document update terminated User Name so and so, after enter Deal is Created in Company Code. But when I check the deal no in FTR_EDIT system is prompting message "No entries exist for the selection", I checked in table VTBFHA also there also deal no is not showing, if try to create Deal again system is taking next available No for the deal. Please share some  ideas if you face same kind of issue.
Thanks & Regards,
AIM

Hi Feng,
Thanks for your reply.I tried that one also even though i am not able to reslove, please suggest any other solution.
Thanks & Regards,
AIM

Similar Messages

  • TPM_MIGRATION No position exists for the selected criteria Msg no. TRQ0020

    Hello Experts.
    I'm facing a error when execute the STEP B06 in TPM_MIGRATION Transaction, the message was:
    No position exists for the selected criteria
    Message no. TRQ0020
    Diagnosis
    This is the position that is characterized by the following details:
    CC=1020;PT=V4I;SA=DEPBCCR;SE=1000013
    When I look the Security ID number in the old system, the Document is obsolete, but the migration transaction seek the FLOW information for this ID number and not return any information.
    Thanks for you help.
    Regards.
    Edited by: k3n_rao on Mar 31, 2011 7:32 PM

    Hi Lorenz,
    Thank you very much for the answer, My colleague, the one who posted the threat is not longer available, he went on hollydays.
    We did check TPM12 & TPM13  and the reports said:
    TPM12 : "no positions selected"
    TPM13: "No flows found"
    Just to double check that we have understood, which "Migration date"  are you reffering to?
    thank you very much
    best regards,

  • DB14 Backup - No logs exist for the selection criteria for system DEV

    Hello Expert,
              When i click on BRBACKUP button Its showing the info message "No logs exist for the selection criteria for system" .
    so please suggest me where i need to maintain the selection criteria.
    Thanks & Regards
    Annasaheb

    Hi Anna,
    As told by Markus and Eric above...
    you never made a backup on you new installed system....then how system will show you backup details(which were not happened in real)
    Why you are searching for money in an empty pot
    Regards
    Nick Loy

  • Error - no elements exist for the selection - RSMIPROACT

    Hi Experts,
    We have an issue with the program RSMIPROACT to send requirement to SNC. We have an error "No elements exist for the selection" once execute the program with input parameters.
    Could you please help me out if anything missing or cause of the error.
    Regards
    Gowri Sankar

    Hi Gowri,
    if the MRP areas are inactive, note 1627486 could help, please verify...
    Regards,
    Mauro

  • WHT - No unpaid tax lines exist for the given selection criteria

    Before going to execute Create remittance challan J!INCHLN ,
    i entered all the mentioned  parameters and  try to save but  i got error message  as follows
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updating. Check the entries.
    Procedure
    Check entries in table WITH_ITEM for the open tax items chosen for clearing.

    Hi,
    Please check for
    1. Section code/ Business place updated even in the tax lines of the document and not just the vendor line item.
    2. Check if there is a buzei mismatch between with_item table entries and bseg entries for the documents that are being pulled during the challan creation. If there is a Buzei mismatch, then please run the program in the note :885213 and then rerun the challan .
    3. Please check the note :1465529 . This is the consulting note for j1inchln.
    Hope this helps.
    Thank You.
    Regards,
    Anushya

  • No unpaid tax lines exist for the given selection criteria while+J1inchln

    Hi All,
    While doing J1inchln I am getting following error.
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.I have already updated Business Place and Section code while doing FB60.But still I am getting the same error.
    I have already updated Business Place and Section code in the entry while doing FB60 but error is coming. Please advise.
    Regards,
    Abhinav Sharma

    Hi ,
    Kindly go through the note no. 1465529 , which is a consulting note on J1INCHLN .
    It would resolve your query .
    Regards ,
    Dewang T

  • No unpaid tax lines exist for the given selection criteria.

    Hi
    at the time of remittance challan,getting following error:
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.

    Hi,
    It may cleared Manual posting at the time of posting.  If manual clear postings reverse and do through J1INCHLN only.
    and check the Date range for selection criteria.
    Regards,
    Kishore

  • OTL Error - Hrs - Element link does not exist for the duration of the entry

    Hi,
    We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
    Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
    However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
    Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
    I have re-run the security list generation (we are using static list).
    The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
    The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
    We are using 11.5.10.2
    Thankss

    Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
    If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

  • API error: Element link does not exist for the duration of the entry

    I am trying to create an element using the API_PAY_ELEMENT_ENTRY.CREATE_ELEMENT_ENTRY API
    While I am able to create many elements for years this way, for one particular non-recurring element I get the following error
    ORA-20001: Element link does not exist for the duration of the entry
    Cause: The link has been purged or date effectively deleted.
    Action: Check the effective start and end dates on the link definitions for this element.
    I have checked evertything and the Link is defined far before my element entry starts and with no end date. The assignment I want to attach this element entry is perfectly eligible.
    The weirdest is that I am able to create this element entry with the values I want and the dates I want through standard User interface...
    Any idea?
    Message was edited by:
    briard

    Here are the parameters I use in my call.
    DECLARE
    L_EFFECTIVE_START_DATE DATE;
    L_EFFECTIVE_END_DATE DATE;
    L_ELEMENT_ENTRY_ID NUMBER;
    L_OBJECT_VERSION_NUMBER NUMBER;
    L_WARNING BOOLEAN;
    BEGIN
    APPS.PAY_ELEMENT_ENTRY_API.CREATE_ELEMENT_ENTRY(
    P_EFFECTIVE_DATE => TO_DATE('01-JUL-2008','DD-MON-YYYY'),
    P_BUSINESS_GROUP_ID => 1,
    P_ASSIGNMENT_ID => 122147
    P_ELEMENT_LINK_ID => 233,
    P_ENTRY_TYPE => 'E',
    P_INPUT_VALUE_ID1 => 313,
    P_ENTRY_VALUE1 => 'T',
    P_INPUT_VALUE_ID2 => 314,
    P_ENTRY_VALUE2 => '5',
    -- out params
    P_EFFECTIVE_START_DATE => L_EFFECTIVE_START_DATE,
    P_EFFECTIVE_END_DATE => L_EFFECTIVE_END_DATE,
    P_ELEMENT_ENTRY_ID => L_ELEMENT_ENTRY_ID,
    P_OBJECT_VERSION_NUMBER => L_OBJECT_VERSION_NUMBER,
    P_CREATE_WARNING => L_WARNING);
    END;
    François

  • How to populate the ranges using FM for the SELECTs

    Hi,
    I am still working on the FM to create a generic extractor. I went through the debugger but I am still unable to determine how the ranges are populated. RSA3 always gives me zero values for the results.
    There is a RANGE statement in the sample FM and the following statements for SELECTs
      RANGES: L_R_CARRID  FOR SFLIGHT-CARRID,
              L_R_CONNID  FOR SFLIGHT-CONNID.
    and...
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
            MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
            APPEND L_R_CARRID.
          ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
            MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
            APPEND L_R_CONNID.
          ENDLOOP.
    My question is how is L_R_CONNID and L_R_CARRID populated with low and high values for the SELECT statements? I tried to find the DS 0SAPI_SFLIGHT_SIMPLE to run and see how it is set up but there is no such DS.
    Would someone take the time to say something about this in  several sentences? I have my own code and it seems that it is not populating the values for the SELECTs when I debug from RSA3 when I provide the low and high values.
    Would I normally populate the low and high values from the InfoPackage 'Data Selection' tab once I have implemented in BW or ready to test in BW? That would mean I have to choose those fields as selections from RSO2. Anyway, I think I have asked about this but I am hoping to get an answer to get this going...
    Appreciate any replies.

    Hi
    Here is an example of an extractor that uses
    both method's, if the InfoPackage selection exist's
    it overrides the TVARV selection (which is the default).
    FUNCTION ZBW_TC_FORECAST_SO_EXTRACTOR.
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(I_REQUNR) TYPE  SBIWA_S_INTERFACE-REQUNR
    *"     VALUE(I_DSOURCE) TYPE  SBIWA_S_INTERFACE-ISOURCE OPTIONAL
    *"     VALUE(I_CHABASNM) TYPE  SBIWA_S_INTERFACE-CHABASNM OPTIONAL
    *"     VALUE(I_MAXSIZE) TYPE  SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
    *"     VALUE(I_INITFLAG) TYPE  SBIWA_S_INTERFACE-INITFLAG OPTIONAL
    *"     VALUE(I_UPDMODE) TYPE  SBIWA_S_INTERFACE-UPDMODE OPTIONAL
    *"     VALUE(I_DATAPAKID) TYPE  SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
    *"     VALUE(I_PRIVATE_MODE) OPTIONAL
    *"     VALUE(I_CALLMODE) TYPE  ROARCHD200-CALLMODE OPTIONAL
    *"  TABLES
    *"      I_T_SELECT TYPE  SBIWA_T_SELECT OPTIONAL
    *"      I_T_FIELDS TYPE  SBIWA_T_FIELDS OPTIONAL
    *"      E_T_DATA STRUCTURE  ZBW_TC_FORECASTING_EXT_STR OPTIONAL
    *"  EXCEPTIONS
    *"      NO_MORE_DATA
    *"      ERROR_PASSED_TO_MESS_HANDLER
    *"      HIERARCHY_NOT_FOUND
    Change History                                                      *
    Mod. #  |  Date    |  Developer     |  Description                  *
    *RD3K915762|06/21/2005| SRangaraj      | Change selection of open SO   *
             |          |                | data to include deleted matls *
             |          |                | and obsolete items too        *
    RD3K915888|06/29/2005| SRANGARAJ      | Add ext matl grp and lab offce
             |          |                | filters for data-selection    *
    The input parameter I_DATAPAKID is not supported yet !
    Auxiliary Selection criteria structure
      DATA: L_S_SELECT TYPE SBIWA_S_SELECT.
    Maximum number of lines for DB table
      STATICS L_MAXSIZE TYPE SBIWA_S_INTERFACE-MAXSIZE.
    Parameter I_PRIVATE_MODE:
    Some applications might want to use this function module for other
    purposes as well (e.g. data supply for OLTP reporting tools). If the
    processing logic has to be different in this case, use the optional
    parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
    between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
    (I_PRIVATE_MODE = X).
    If the message handling has to be different as well, define Your own
    messaging macro which interprets parameter I_PRIVATE_MODE. When
    called by BIW, it should use the LOG_WRITE macro, otherwise do what
    You want.
    Initialization mode (first call by SAPI) or data transfer mode
    (following calls) ?
      IF I_INITFLAG = SBIWA_C_FLAG_ON.
    Initialization: check input parameters
                    buffer input parameters
                    prepare data selection
    The input parameter I_DATAPAKID is not supported yet !
    Invalid second initialization call -> error exit
        IF NOT G_FLAG_INTERFACE_INITIALIZED IS INITIAL.
          IF 1 = 2. MESSAGE E008(R3). ENDIF.
          LOG_WRITE 'E'                    "message type
                    'R3'                   "message class
                    '008'                  "message number
                    ' '                    "message variable 1
                    ' '.                   "message variable 2
          RAISE ERROR_PASSED_TO_MESS_HANDLER.
        ENDIF.
    Check InfoSource validity
        CASE I_DSOURCE.
          WHEN 'ZBW_TC_SO_EXTRACT'.
          WHEN OTHERS.
            IF 1 = 2. MESSAGE E009(R3). ENDIF.
            LOG_WRITE 'E'                  "message type
                      'R3'                 "message class
                      '009'                "message number
                      I_DSOURCE            "message variable 1
                      ' '.                 "message variable 2
            RAISE ERROR_PASSED_TO_MESS_HANDLER.
        ENDCASE.
    Check for supported update mode
       CASE I_UPDMODE.
         WHEN 'F'.
         WHEN OTHERS.
           IF 1 = 2. MESSAGE E011(R3). ENDIF.
           LOG_WRITE 'E'                  "message type
                     'R3'                 "message class
                     '011'                "message number
                     I_UPDMODE            "message variable 1
                     ' '.                 "message variable 2
           RAISE ERROR_PASSED_TO_MESS_HANDLER.
       ENDCASE.
    Check for obligatory selection criteria
       READ TABLE I_T_SELECT INTO L_S_SELECT WITH KEY FIELDNM = 'PGMID'.
       IF SY-SUBRC <> 0.
         IF 1 = 2. MESSAGE E010(R3). ENDIF.
         LOG_WRITE 'E'                    "message type
                   'R3'                   "message class
                   '010'                  "message number
                   'PGMID'                "message variable 1
                   ' '.                   "message variable 2
         RAISE ERROR_PASSED_TO_MESS_HANDLER.
       ENDIF.
        APPEND LINES OF I_T_SELECT TO G_T_SELECT.
    Fill parameter buffer for data extraction calls
        G_S_INTERFACE-REQUNR    = I_REQUNR.
        G_S_INTERFACE-ISOURCE   = I_DSOURCE.
        G_S_INTERFACE-MAXSIZE   = I_MAXSIZE.
        G_S_INTERFACE-INITFLAG  = I_INITFLAG.
        G_S_INTERFACE-UPDMODE   = I_UPDMODE.
        G_S_INTERFACE-DATAPAKID = I_DATAPAKID.
        G_FLAG_INTERFACE_INITIALIZED = SBIWA_C_FLAG_ON.
    Fill field list table for an optimized select statement
    (in case that there is no 1:1 relation between InfoSource fields
    and database table fields this may be far from beeing trivial)
        APPEND LINES OF I_T_FIELDS TO G_T_FIELDS.
    Fill range tables for fixed InfoSources. In the case of generated
    InfoSources, the usage of a dynamical SELECT statement might be
    more reasonable. BIW will only pass down simple selection criteria
    of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
        LOOP AT G_T_SELECT INTO L_S_SELECT.
          CASE L_S_SELECT-FIELDNM.
            WHEN 'PRDHA'.
              WGF_PRDHA_LENGTH = STRLEN( L_S_SELECT-LOW ).
              IF WGF_PRDHA_LENGTH = 6.  "PARTIAL PRDHA
                 WGF_PRDHA = L_S_SELECT-LOW.
                 CONCATENATE WGF_PRDHA '%' INTO WGF_PRDHA.
              ELSEIF WGF_PRDHA_LENGTH = 12.  "FULL PRDHA
              MOVE-CORRESPONDING L_S_SELECT TO L_R_PRDHA.
              APPEND L_R_PRDHA.
              ENDIF.
            WHEN 'MATKL'.
              MOVE-CORRESPONDING L_S_SELECT TO L_R_MATKL.
              APPEND L_R_MATKL.
          ENDCASE.
        ENDLOOP.
    reset the index of where we are in the gt_header table
      g_tabix = 0.
      perform populate_default_variables.
      perform get_data.
      perform build_detail.
        EXIT.
      ENDIF.                 "Initialization mode or data extraction ?
    Data transfer: First Call      OPEN CURSOR + FETCH
                   Following Calls FETCH only
    First data package -> OPEN CURSOR
       IF G_COUNTER_DATAPAKID = 0.
    Determine number of database records to be read per FETCH statement
    from input parameter I_MAXSIZE. If there is a one to one relation
    between InfoSource table lines and database entries, this is trivial.
    In other cases, it may be impossible and some estimated value has to
    be determined.
      DESCRIBE TABLE LT_DATA LINES l_count.
      IF g_tabix GE l_count.
        RAISE no_more_data.
      ENDIF.
    *CLEAN UP THE OUTPUT TABLE
      refresh E_T_DATA.
      LOOP AT LT_DATA FROM G_TABIX INTO LS_DATA.
        APPEND LS_DATA TO E_T_DATA.
    Set global counter
        g_tabix = g_tabix + 1.
      ENDLOOP.
       G_COUNTER_DATAPAKID = G_COUNTER_DATAPAKID + 1.
    ENDIF.              "Initialization mode or data extraction ?
    ENDFUNCTION.
    Forms
    ***INCLUDE LZBW_TC_FORECAST_SO_EXTF01 .
    *&      Form  populate_default_variables
          text
    -->  p1        text
    <--  p2        text
    FORM populate_default_variables.
      data: wlf_name like tvarv-name.
      clear: R_prdh3[], wlf_name.
    *get the exclusion range from tvarv for the product hierarchy in
    *question
      concatenate 'ZBW_EXL_' WGF_PRDHA(6) INTO WLF_NAME.
    SELECT LOW FROM TVARV INTO R_prdh3-low WHERE
                                 NAME = WLF_NAME.
      move:  'I'    to R_prdh3-sign,
             'EQ'   to R_prdh3-option.
      append R_prdh3.
      clear R_prdh3.
    ENDSELECT.
    {Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
    CLEAR L_R_LABOR[].
    SELECT LOW FROM TVARV INTO L_R_LABOR-Low WHERE
                                 NAME = 'ZBW_TC_FORECAST_LAB_OFF'.
      move:  'I'    to L_R_LABOR-sign,
             'EQ'   to L_R_LABOR-option.
      append L_R_LABOR.
      clear L_R_LABOR.
    ENDSELECT.
    }End of insert by SRangaraj on June 29, 2005 >>RD3K915888
    ENDFORM.                    " populate_default_variables
    *&      Form  get_data
          text
    -->  p1        text
    <--  p2        text
    FORM get_data.
      data: wlf_lmeng like vbep-lmeng.
    *get all deliveries for date range for either a range of product hrchy
    *or a like value
      refresh int_records1.
      if wgf_prdha ne space.
        select ivbeln iposnr iKLMENG jvkorg i~werks
               imatnr imeins mprdha mmatkl
        from vbap as i
           INNER JOIN VBAK AS j
           ON ( jvbeln = ivbeln
                and j~vbtyp = 'C' )
           INNER JOIN vbuk AS k
           ON ( kvbeln = ivbeln
                and k~lfgsk <> 'C'
                and k~gbstk <> 'C' )
           INNER JOIN vbup AS l
           ON ( lvbeln = ivbeln and
                lposnr = iposnr
                and l~lfgsa <> 'C'
                and l~gbsta <> 'C' )
           INNER JOIN mara AS m
           ON ( mmatnr = imatnr
    {Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
                and m~lvorm eq ' '
                and m~mstae ne '99'
    {Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
                and m~extwg = '080' )
    }End of insert by SRangaraj on June 29, 2005 >>RD3K915888
           INNER JOIN marc AS n
           ON ( nmatnr = imatnr
                and nwerks = iwerks
                and n~lvorm eq ' ' )
    }End of insert by SRangaraj on June 21, 2005 >>RD3K915762
        into table int_records1 where ( i~abgru = '  '
                                     and i~klmeng > 0
                                     and m~prdha like wgf_prdha
                                     and m~matkl in l_r_matkl
    {Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
                                     and m~labor in l_r_labor ).
    }End of insert by SRangaraj on June 29, 2005 >>RD3K915888
      elseif not l_r_prdha[] is initial and wgf_prdha = space.
        select ivbeln iposnr iKLMENG jvkorg i~werks
               imatnr imeins mprdha mmatkl
        from vbap as i
           INNER JOIN VBAK AS j
           ON ( jvbeln = ivbeln
                and j~vbtyp = 'C' )
           INNER JOIN vbuk AS k
           ON ( kvbeln = ivbeln
                and k~lfgsk <> 'C'
                and k~gbstk <> 'C' )
           INNER JOIN vbup AS l
           ON ( lvbeln = ivbeln and
                lposnr = iposnr
                and l~lfgsa <> 'C'
                and l~gbsta <> 'C' )
           INNER JOIN mara AS m
           ON ( mmatnr = imatnr
    {Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
                and m~lvorm eq ' '
                and m~mstae ne '99'
    {Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
                and m~extwg = '080' )
    }End of insert by SRangaraj on June 29, 2005 >>RD3K915888
           INNER JOIN marc AS n
           ON ( nmatnr = imatnr
                and nwerks = iwerks
                and n~lvorm eq ' ' )
    }End of insert by SRangaraj on June 21, 2005 >>RD3K915762
        into table int_records1 where ( i~abgru = '  '
                                     and i~klmeng > 0
                                     and m~prdha in l_r_prdha
                                     and m~matkl in l_r_matkl
    {Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
                                     and m~labor in l_r_labor ).
    }End of insert by SRangaraj on June 29, 2005 >>RD3K915888
    endif.
        sort int_records1 by vbeln posnr.
        delete adjacent duplicates from int_records1 comparing
        vbeln posnr.
    *remove unnecessary records
        if not r_prdh3[] is initial.
        DELETE INT_RECORDS1 WHERE PRDHA+6(3) IN r_prdh3.
        endif.
    *get the schedule lines for all of the above records and
    *get the lowest schedule line date per so line item
         if not int_records1[] is initial.
         refresh int_records3.
         select vbeln posnr etenr mbdat into table int_records3
         from vbep for all entries in int_records1
                           where vbeln = int_records1-vbeln and
                                 posnr = int_records1-posnr and
                                 lmeng > 0.
         sort int_records3 by vbeln posnr etenr mbdat ascending.
         loop at int_Records1.
           loop at int_records3 where vbeln = int_records1-vbeln
                                  and posnr = int_records1-posnr.
             int_records1-mbdat = int_records3-mbdat.
             modify int_records1.
             exit.
            endloop.
         endloop.
         refresh int_records3. free int_records3.
         refresh int_records2.
    *get the deliveries and calculate the open quantities
        select vbelv posnv vbeln posnn rfmng plmin
                    from vbfa into table int_records2
                                  for all entries in int_Records1
                                  where vbelv = int_records1-vbeln
                                    and posnv = int_records1-posnr
                                    and VBTYP_N = 'J'. "Dels
    *calculate open quantities next
         loop at int_records1.
           clear wlf_lmeng.
           clear int_records2.
           loop at int_records2 where vbelv = int_records1-vbeln
                                    and posnv = int_records1-posnr.
           case int_records2-plmin.
             when '-'.
              wlf_lmeng = wlf_lmeng - int_records2-rfmng.
             when others.  "just add
              wlf_lmeng = wlf_lmeng + int_records2-rfmng.
            endcase.
           endloop.
           int_records1-klmeng = int_records1-klmeng - wlf_lmeng.
           int_records1-vbeln_dl = int_records2-vbeln.
           int_records1-posnr_dl = int_records2-posnn.
           modify int_records1.
        endloop.
        endif.
        delete int_records1 where klmeng le 0.
        refresh int_records2. free int_Records2.
    ENDFORM.                    " get_data
    *&      Form  build_detail
          text
    -->  p1        text
    <--  p2        text
    FORM build_detail.
        LOOP AT int_records1.
    *DO INDIVIDUAL MOVES - ITS FASTER THAN MOVE-CORRESPONDING
        move: int_records1-vkorg    to LS_DATA-VKORG,
              int_records1-werks    to LS_DATA-WERKS,
              int_records1-matnr    to LS_DATA-MATNR,
              int_records1-klmeng   to LS_DATA-KLMENG,
              int_records1-mbdat(6) to LS_DATA-YEARMONTH,
              int_records1-meins    TO LS_DATA-MEINS,
              int_records1-vbeln    TO LS_DATA-VGBEL,
              int_records1-posnr    TO LS_DATA-VGPOS,
              int_records1-vbeln_dl TO LS_DATA-VBELN,
              int_records1-posnr_dl TO LS_DATA-POSNR,
              int_records1-mbdat    to LS_DATA-WADAT_IST,
              int_records1-PRDHA    to LS_DATA-PRDHA,
              int_records1-matkl    to LS_DATA-MATKL.
        APPEND LS_DATA TO LT_DATA.
        clear: LS_DATA.
        ENDLOOP.
    ENDFORM.                    " build_detail

  • No possible entries exist for this field for Shipping Point

    Hi gurus,
    I require the Shipping Point to be automatically determined in the Sales Order. Except this is not happening, I then attempt to manually select a Shipping Point in the line item of the Sales Order and receive the following error (in green)
    "No possible entries exist for this field"
    The Material Master has the Loading Group assigned.
    The Sales Order Type has the Shipping Condition assigned (so does the Customer)
    The Plant is assigned to the Customers (no CMIR created)
    The combination of the three are entered in the 'Shipping Points Determination" table in SPRO with a Proposed Shipping Point AND a Manual Shipping Point.
    Except I can not choose either of them as a Shipping Point in a Sales Order.
    Anyone have the knowledge to understand why I can not select a Shipping Point?
    Thanks

    Shipping Point Determination
    Shipping points are independent organizational units that are linked to a plant and represent the point of departure or receipt of materials.
    Check if shipping point is defined and assigned to plant or not by going to:
    IMG&#61664;Enterprise structure&#61664;Maintain structure&#61664;Assignment&#61664;Logistics execution&#61664;Assign shipping point to plant
    IMG&#61664;SD&#61664;Shipping&#61664;Basic shipping fncs&#61664;Shipping point determination.
    The shipping point is determined based on the shipping conditions, which are either entered manually in the sales order or are copied from the customer master record (shipping screen – 01=as soon as possible, 02=standard, 03=collective processing). The shipping point is also determined by the loading group (0001=crane, 0002=forklift, 0003=manual), which is copied from the material master record, and the delivering plant of the line item in the sales order.
    Regards,
    Rajesh Banka

  • No data Exists for this selection in PSA.

    Hi Guys,
    I received an Error message with loading of 2lis_03_bf datasource..
    Error message when processing in the Business Warehouse
    Diagnosis
    An error occurred in the SAP BW when processing the data. The error is documented in an error message.
    System response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    PSA Table
    DETAILS Tab: Processing (data packet): Errors occurred
                       : Data Package 6 ( ? Records ) : Errors occurred
                       : Update PSA ( 0 Records posted ) : Errors occurred
                       : No data exists for this selection in PSA
    For DataPacket 6 (Records sent :21572 - Records Received : 0) 
    All other datapackets are updated fine with almost 10,00,000 records..Any help on this ,guys..
    Manythanks
    Arun

    Hi,
    While the load was in progress some one might have deleted the data in PSA or there might be a PSA deletion job running or there might be a PSA deletion chiain which includes this table. Check all these to find out how it got deleted.
    In order to load the data again you can do a reload and probably it works fine this time.
    Anup.

  • Node id does not exist for the current application server id

    Hi gurus,
    when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
    i executed the command select server_id from fnd_nodes and had the following output
    SERVER_ID
    991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
    i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
    ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
    IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
    Please help me out.
    thanks.

    i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
    applmgr >./adstrtal.sh apps/apps
    You are running adstrtal.sh version 115.19
    Executing service control script:
    /dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
    script returned:
    adapcctl.sh version 115.55
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    Apache Web Server Listener is not running.
    Starting Apache Web Server Listener (dedicated HTTP) ...
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    Apache Web Server Listener (PLSQL) is not running.
    Starting Apache Web Server Listener (dedicated PLSQL) ...
    Cannot reconnect to gateway
    Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
    Action: Check that your gateway environment variable is set correctly.
    adapcctl.sh: exiting with status 0
    .end std out.
    .end err out.
    please what should i do next to resolve this problem.
    thanks

  • [INS-32021] Insufficient disk space on this volume for the selected Oracle

    Folks,
    Hello. I am installing Oracle 11gR2 RAC Grid using Installer whose location is: /home/.../grid/runInstaller.
    I am on step 4 of 8 in the Wizard whose contents are as follows:
    Oracle Base: /u01/11g_grid
    Software Location: /u01/app/grid
    Cluster Registry Type: ASM
    OSASM Group: dba
    When click "next" button I got this error:
    " [INS-32021] Insufficient disk space on this volume for the selected Oracle home
    Cause - The selected Oracle home was on a volume without enough disk space.
    Action - Choose a location for Oracle home that has enough space (minimum of 3,017MB) or free up space on the existing volume. "
    I test my "home" directory using the command: [ora11g@rac1 home]$ df -k
    Its Ouput:
    Filesystem: /dev/sda1 and tmpfs
    1K-blocks: 20,308,020 and 848,184
    Used: 18,888,968 and 0
    Available: 370,816 and 848,184
    Use: 99% and 0%
    Mounted on : / and /dev/shm
    I run another command: [ora11g@rac1 u01]$df -k and got the same output as above.
    My questions are:
    First, is "Oracle home" the directory "/home/..." or the directory "/u01/..." ?
    Second, how to increase the space for the correct directory to be over 3017MB (Minimum) ?
    Thanks.

    Folks,
    Hello. Thanks a lot for replying.
    I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2).The Virtual Disk for each VM is 20 GB whose raw device is /dev/sda (partition /dev/sda1 is the same size).
    In order to install Grid Infrastructure, I add 5 Hard Disks into the first VM rac1 and 10GB for each Hard Disk.Then create 5 ASM disks respectively as a Disk Group. Let me describe them as follows:
    OS Phyysical file: C:\VM_RAC\sharerac\asmdisk1.vmdk (asmdisk2.vmdk asmdisk3.vmdk asmdisk4.vmdk asmdisk5.vmdk)
    Corresponding raw devices: /dev/sdb (sdc sdd sde sdf)
    Corresponding partition: /dev/sdb1 (sdc1 sdd1 sde1 sdf1)
    Corresponding ASM disk: ASMDISK1 (ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5)
    When I run Grid installer step 5 of 8, I select all of 5 ASMDISK as ASM disk group on step 5 of 8 in the Wizard.
    The clusterware files are supposed to be stored in the ASM disk group.
    But it seems that on step 4 of 8 in the Wizard, the installer install the Oracle Home /u01 into VM rac1 Hard Disk /dev/sda1 and get the above error message - not enough disk space.
    My questions are:
    First, Why does the Installer store Oracle Home /u01 in /dev/sda1 because it should be in the Disk Group /dev/sdb1 (sdc1 sdd1 sde1 sdf1) ?
    Second, Does the Installer go wrongly ?
    Third, How to have the Installer store the clasterware files in ASM Disk Group ?
    Thanks.

  • In MS64(Copy version), No schedule lines exist for the reference

    Hello, experts.
    I have some trouble using MS64.
    Source Version 00 (M)2010.01   AAA  100
    Target Version  M1 (M)2010.01  AAA 100
    Above action has no problem.
    But,
    Source Version 00 (W) 03.2010   AAA  100
    Target Version  M1 (W) 03.2010  AAA 100
    Above action is not possible now.
    The error message is "No schedule lines exist for the reference"
    Please, help me.

    >
    Jong-Moon Cho wrote:
    > Hello, experts.
    >
    > I have some trouble using MS64.
    >
    > Source Version 00 (M)2010.01   AAA  100
    > Target Version  M1 (M)2010.01  AAA 100
    >
    > Above action has no problem.
    >
    > But,
    > Source Version 00 (W) 03.2010   AAA  100
    > Target Version  M1 (W) 03.2010  AAA 100
    >
    > Above action is not possible now.
    >
    > The error message is "No schedule lines exist for the reference"
    >
    > Please, help me.
    Jong-Moon Cho ,
    Please check the selection dates you have used in the Intial screen of MS64, see that the to date should be greater than week 03.2010.
    Regards,
    Prasobh

Maybe you are looking for