No Entry in Table T702Q for key EN

Dear Consultants,
In first attempt to customize Travel Management, I copied Trip Provision Variant 99 to my TPV as TF. Then I confirmed all other entries being maintained in the process. When I tried to create Infotype 17 for any employee, it says, "No Entry in table T702Q in Key EN". I visited T702Q but did not find EN anywhere.
Also the system says the Vehicle Type & Vehicle class do not match.
Regards,
Bindumadhav

This should be easily fixed by your customising in PE03
The feature PE03 is differing the assignment to the trip provision variants based on the company code.If the trip provision that you created is assigned to entry " " (or blank) then when checking the entry in PA30-travel privileges for IT17  the system is looking for an entry with morei ' ' in the table T702Q and this does not exist.
This should fix it!
Edited by: Sally Redmond on Jan 19, 2011 1:50 PM

Similar Messages

  • IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 2

    Hi,
    I have configure  allowance grouping,wage type model,Pay scale type,Pay scale Level, employee group,Employee subgroup,Level.After that I hire one employee useing "T-CODE PA40".But same time system has giving following error message :- "IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 20070824" so I am unable to update infotype 8.Please give me reply as early as possiable.
    Regards
    Subhedar B.

    table t510
    MANDT MOLGA TRFAR TRFGB TRFKZ TRFGR    TRFST LGART  ENDDA      BEGDA      BETRG
    100   IQ    01    01    1     GRADE 13 1            31.12.9999 01.01.2012              0.00
    100   IQ    01    01    3     GRADE 13 1            31.12.9999 01.01.2012              0.00
    t511
    MANDT    100
    MOLGA    IQ
    LGART    1019
    ENDDA    31.12.9999
    BEGDA    01.01.1992
    ABTYZ       1
    WKTYZ     11
    OPKEN
    ZEINH    030
    KOMBI    2
    BTMIN    0
    BTMAX    0
    ADSUM    X
    MODNA    TARIF
    MODSP
    RUTYP
    RUDIV    0
    ADDJN
    MOD01    1
    MOD02
    MOD03    A
    ANMIN    0.00
    ANMAX    0.00
    V_511_B
    Wage Type       1019 Bonus Percentage                  01.01.1992 31.12.9999
    EE Subgroup grouping   Personal subarea
    0  1  2  3  4  5  6  7  8  9     0  1  2  3  4  5  6  7  8  9
              1                          1  1

  • No entry in table T001P for key - PT60

    Hi Folks,
    I´ve got the same error people have reported since some time in this forum, but I didn't find a clear reason or way to fix the issue.
    The error "No entry in table T001P for key" is displayed for only 1 employee during time evaluation.I've checked table T001P, IT 0001, IT 0007, and everything seems tom be OK. I have other employee in same Work Schedule and other guy with same information in IT0001, but only this guy has the issue.
    In other thread someone put "Make a blank entry in table and this fixes the issue", but it's not clear in how to do it or why this fixes the issue.
    Thanks for any help.
    (rewarded with points)

    HI,
    Check IT 2006 and IT0001. A valid record must exist in IT 0001 for the last 2006 record. Check BEGDA of IT2006 and review that is greater than BEGDA and lesser than ENDDA of any valid record in IT0001
    If this is not happening, then RPTIME program returns empty values in table T001P and this causes the "no entry in table" message.
    Regards,

  • No entry in table T71ADM10 for key 'X'

    Hello,
    While uploading data from R/3, I get this error message:
    'No entry in table T71ADM10 for key "X"'
    But when I look in the R/3 table T71ADM10, then I am able to find entries for the key 'X'.
    Additionaly in the BI DataSource Monitor, if I click the 'Maintain PSA' button, all records are shown as updated successfully. No erronous records are returned.
    Under the 'Details' tab, 'Extraction' shows error; but 'Transfer' and 'Processing' Steps are shown successful.
    Please advice.
    Thanks & Regards,
    Labanya.

    Hello Labanya,
    As  you telling data is available  in PSA . So  there is need to do update from fro PSA. So Just select that request number  goto RSA1--> PSA. Then find your Request number. Check whether  it has with red mark. Then right click on mouse and select  "start the update immediately". And check  whether you are getting same error or not.
    Thanks,
    Abha

  • No entry in table T556P for key    24000                       at 20130301

    Hi Friends,
    While generating time eveluation i'm getting another issue.
    sytem throwing error as "
    No entry in table T556P for key    24000                       at 20130301
    Person rejected: 00007240"
    Could you please suggest me y system  throwing above error.
    Regards,
    M.Basha.

    Hi,
    Are you using attendance quotas in your solution? Also, are you using a copy of schema TM00?
    If you are not using attendance quotas in your solution, can you comment out the line:
    P2007 TS20  GEN
    Let me know if this is the case or not.
    Thanks and regards,
    Vivek Barnwal

  • No entry in table T551A for key 40 GENR

    Hi Guys,
    Can anyone please tell me what  is the meaning of this error.
    "No entry in table T551A for key 40 GENR"
    I am getting this error while i m trying to set work schedule rule.
    Thanks
    Deepali
    Edited by: DeepaliHCM on Jan 28, 2010 10:27 AM

    DWS grouping , PWS grouping are connected to each other and when you create any work schedule it will get feched from different tables .. if there is no relavancy in the primary keys ,,, here it is 40 then it will throw this error
    please write down on paper whatever grouping you are maintaning in TM configuration ... and check where revancy is missing
    and i think maintaining it on paper for your better reference will not eat your more time

  • No entry in table T512W for key 40 9913

    Dear Guru
    When I am running simulation payroll run, system is throwing this error "No entry in table T512W for key 40 9913".
    9913 is the wage type which is getting updated due to INCS rule.
    In the log, 9913 value is same as value of EDLI Contribution
    /3F7 EDLI contri0101                                                    32.50
    9913            0101                                                    32.50
    I checked 40EPF feature and checked master data in 587, all are correct.Is there something I need to check? Please guide
    Regards
    Vikas K Sharma

    Hi
    I checked the customized WT entry table and there is no 9 series WT at all.
    Recently patches were updated in development. Do I have to check 40EPF features or something. I was reading some reply here but I am not clear how to do such changes.
    Please guide.
    Regards
    Vikas K Sharma

  • No entry in table T554C for key 40 01 01 for time 26.08.2009

    Hello experts,
    I am simulating payroll, after entering an absence,
    Its giving error like - No entry in table T554C for key 40 01 01 for time 26.08.2009
    I have checked this table and there is entry for the respective absence.
    Why still that error is coming ?
    Will you please help me out to simulate my payroll with absence valuation ?
    Thanks and Regards
    Jaydeep Jadhav

    Hello Revathi,
    thanks for replying me ...
    yes ... i am using -ve time management.
    my payroll schema name is ZN00
    tc00 is commented already
    system stops at Processing of time data PAB edit absence data
    Thanks in advance.
    Jaydeep Jadhav
    Edited by: Jaysaphr on Aug 26, 2009 5:14 PM

  • No entry in table T549Q for key 01 at 20120131

    Hi Experts,
    I am getting this error "No entry in table T549Q for key 01 at 20120131". On running time evaluation.I have generated payroll period frm 1999 to 2020.employee hire date is
    1.1.2012.runnig TE for first month upto 31.1.2012.control record set to correction in 1.1.2012-31.1.2012(11th payroll period of
    2011).this error is not at all going.
    Help is appreciated...
    Thanks in advance

    Hi Sujit,Pradeep,ERP12345
    Issue resolved...
    I have not used period parameter 01.but copied it to my customized one.I changed it to 01 and TE run successfully.
    But my question is why after copying it is throwing this error? i cant find any logic
    sorry I cant give any forum points because its already resolved...
    But anybody can tell the logic then i will definitely give the points.
    Thanks in advance...

  • Payroll error:          No entry in table T549A for key

    Hi whilw running payroll, there is a error
             No entry in table T549A for key
    what could be the possible reason. there are 2 payroll areas one for monthly and the other for semi monthly. this is for semi monthly. monthly is running fine.
    -request help on this

    Hi,
    Go to the perticular table and check whether you have maintained any entries for Payroll area and date modifier for semi monthly period parameter also check whether run payroll bos is checked or not.
    Regards

  • No entry in table T596F for key RADDSG       on 00000000

    Dear SAP Experts,
    Currently we have created a new personnel area for Singapore. However, when we perform a payroll retroactive run, it hits the below error
    No entry in table T596F for key RADDSG       on 00000000
    I have checked table T596F and the entry for RADDSG being maintained to 31.12.9999. Please advice what could possibly causing this error. Thank you.
    Best Regards,
    Vickee

    No entry in table T596F for key RSDFSG  on 00000000
    Hi Vickee Chong,
    Do you resolved the issue?
    I am facing similar kind issue(No entry in table T596F for key RSDFSG on 00000000) in singapore payroll.
    Please help to provide the solution.
    Thank you.

  • No entry in table T001P for key when running time evaluation

    Hi There,
    All the master data is in synch and I am getting this error when
    running time evaluation.
    *No entry in table T001P for key
    Person rejected: xxxxxxxx*
    Apparantly this seems to be config error but we have lot of EEs like this, working okay. All the  master data dates are correct.
    Any comment/help is greatly appreciated.
    Thanks,
    Gajanan

    Hi,
    In one of the thread i have read that, after maintaining Contract Type the issue has been resolved.
    and in other thread he says
    "the issue is caused by a mismatch in the employee's master data dates. Particularly with infotype 8, the first record of his basic pay had a date prior to his hire date"
    Can you please check it once.
    Good Luck..!
    KK

  • IndVal of wage type 1019: No entry in table T510 for key 'IQ01013GRADE 1301 ' on 26.02.2014

    Dear All,
    Message no. RP032
    While maintaining 1019 wage type in IT0008 for an employee, I get the error message "IndVal of wage type 1019: No entry in table T510 for key 'IQ01013GRADE 1301 ' on 26.02.2014". It does not allow me to save the record.
    Below was the R&D done.
    1. Checked the entries in T510 and the entries with employee sub grouping for CAP is present there with both 1 and 3 .
    2. Checked the validity dates of the entry and the date record is being created. Both are in sync.
    3. Checked in table t511 table and see TARIF with type A has been maintained and entries looks fine.
    This is International payroll.
    Pls feel free to let me know if you have any questions.
    Thanks in advance

    table t510
    MANDT MOLGA TRFAR TRFGB TRFKZ TRFGR    TRFST LGART  ENDDA      BEGDA      BETRG
    100   IQ    01    01    1     GRADE 13 1            31.12.9999 01.01.2012              0.00
    100   IQ    01    01    3     GRADE 13 1            31.12.9999 01.01.2012              0.00
    t511
    MANDT    100
    MOLGA    IQ
    LGART    1019
    ENDDA    31.12.9999
    BEGDA    01.01.1992
    ABTYZ       1
    WKTYZ     11
    OPKEN
    ZEINH    030
    KOMBI    2
    BTMIN    0
    BTMAX    0
    ADSUM    X
    MODNA    TARIF
    MODSP
    RUTYP
    RUDIV    0
    ADDJN
    MOD01    1
    MOD02
    MOD03    A
    ANMIN    0.00
    ANMAX    0.00
    V_511_B
    Wage Type       1019 Bonus Percentage                  01.01.1992 31.12.9999
    EE Subgroup grouping   Personal subarea
    0  1  2  3  4  5  6  7  8  9     0  1  2  3  4  5  6  7  8  9
              1                          1  1

  • No entry in table T512W for key 40 0NPA

    Hi ! all
    i have some problem in payroll processing.
    i have delimited the wage type 0NPA with end date as 26.11.2008. This wage type was a used for EPF calculation. Now there is change in policy with effect from 25.11.2008. This wage type is no longer a part of EPF calculation. So i delimited the same wef from 26.11.2008. Now am trying to process the salary for period 01.04.2009 to 30.04.2009, i am getting an error
    " No entry in table T512W for key 40 0NPA for time 30.04.2009 ".
    This is an indian salary senario.
    Kindly  suggest the solution.
    regards
    Sanjay Petkar

    Hi !  partha
    Thanks for the reply.
    I tried what you said
    in SM30 modified V_512W_D for 0NPA and removed tick from cummulation item 11(EPF)
    and processed the paybill i am till getting the same error.
    I missed to mentioned that, i created the new wage type copy of the 0NPA  as NPBS. As NPA is to be paid to employees but this should not be taken for EPF calculation. so i am using the new code for NPA and discontinue 0NPA.
    Kindly suggest solution to overcome this problem
    Regards
    Sanjay Petkar

  • No entry in table T5w1N for key 2 MOMENTUM PROVFD 20100228

    I am getting that error when running payroll. But when i check in table the scheme is there with validity date from 01.01.1900 to 31.12.9999

    Hi,
    Go to the perticular table and check whether you have maintained any entries for Payroll area and date modifier for semi monthly period parameter also check whether run payroll bos is checked or not.
    Regards

Maybe you are looking for