No globe on menu

I am supposed to have the data pack from Sprint but there is no globe on my phone menu. Can someone help?

If you check with your carrier and they say you have a data plan then you can try reregistering the device by going into Options | Advanced Options | Host Routing Table. Select the bold entry, hit the menu key and select Register Now. That should send a registration message from your carrier to the device. Afterwards try removing the battery for 30 seconds.
Or you can log into the Sprint BIS site and send the service books back onto your device
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

When using a website's pulldown menu (i.e. Facebook), the text is not visible. I have already reset Firefox/

I go to facebook and click on one of the toolbar options like messages. The drop down window opens but no text is visible. If I click on a region of the open window, sometimes it will take me to a message. This also happens on yahoo.

Have you noticed any other problems with the colors or styles on these or other sites?
If you use command+a to Select All text on the page, can you see content in the blank box?
Here is some general advice:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Command+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Firefox menu) > Preferences > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Tools menu > Page Info > Security > "View Cookies"
* click the padlock or globe icon in the address bar > More Information > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

Icon on home screen - yellow globe

I have only had my Blackberry for a few days but an icon appeared on it earlier today has which is exactly where new SMS and email notifications appear. It is a yellow globe like the browser icon and has a '1' next to it. I do not know what this means and would appreciate any help in finding out how to get rid of it and/or opening whatever it is symbolising.
Thanks, caroline.
Solved!
Go to Solution.

A yellow globe.... open your main messages folder and click the Menu key (left of the trackball) to VIEW FOLDERS.
Look first in WAP messages, and clear or open any messages there.
If not there, check browser messages too.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I'm a newbee, (Win Tech) Would like to know what command it is for reaching the reinstall menu at boot-up. I do not meen cmd r menu wich just install OSX above the OS. I think I need a totally fresh installation. Do you have any clue?

I'm a newbee, (Win Tech) Would like to know what command it is for reaching the reinstall menu at boot-up.
I do not meen cmd r menu wich just install OSX above the OS. I think I need a totally fresh installation.
Do you have any clue? Have several issues on a new MacBookPro but it's propably "PEBKAC" made..
Uffe

It is Command+r or for the online internet system it is Command+option/Alt+r keys. Then you use Disk Utility to erase the macintosh partition, from the built in recovery hd, or you can repartition the drive as one partition from the online system.
To actually get to the online internet system you have to hold that key combo down until you see a globe on the screen. Otherwise it will just boot from the built in recovery hd on the internal drive.

My partition menu in Disk Utility is greyed out in recovery partition

So upgraded to yosemite and after a while decided that i would do a clean install of it because it didn't update the recover partition and i could no longer boot into Ubuntu partition. So i made my bootable drive and booted into it. I was met with:
When i clicked on the hard drive in the sidebar that it was only 300gbs, which is the size of my os x partition.
I then went to the partition menu and i could not change anything there. I can't resize anything or repartition anything.
I've tried to do multiple things in terminal from recovery and bootable disk but to no avail. It still won't work. The thing is that when i type diskutil list into terminal i get
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         300.0 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         1.0 MB     disk0s4
   5: 0FC63DAF-8483-4772-8E79-3D69D8477DE4               195.0 GB   disk0s5
   6:                 Linux Swap                         4.2 GB     disk0s6
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *299.6 GB   disk1
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:                  Apple_HFS MacBook Pro Back Up     398.2 GB   disk2s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk2s3
   4:                  Apple_HFS Back up of files        100.9 GB   disk2s4
/dev/disk0 is the internal hard drive that i want to reformat, /dev/disk1 i don't know what that is. It could be an internal thing in the drive? And /dev/disk2 is my external hard drive that is running mavericks that i writing this on.
I've tried resetting PRAM and SMC but that didn't help.
Didn't know if reinstalling the OS would help?
What i want to get is to reformat /dev/disk0 so that i have a 500gb hard drive that i can then do a clean install of yosemite on and then possibly make an ubuntu partition later. PLEASE HELP!!!

And, this was from the Internet Recovery utilities window, right? OK, this next suggestion depends on which MBA model you have. Check the link below. If your model came with Lion pre-installed then it is capable of using Internet Recovery. If it came with a late version of Snow Leopard it can be upgraded via a firmware update. You will find this in the link below.
Computers that can be upgraded to use OS X Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Note: You will need an active Internet connection. I suggest using Ethernet
            if possible because it is three times faster than wireless.
Once the Utility Menu appears select Disk Utility and click on the Continue button. Now try removing the partition again. If you have the same error, then do the following:
From the screen's menubar select Terminal from the Utilities menu. Enter the following at the prompt:
     diskutil list
Press RETURN. You should see a display of your devices. Next enter:
     diskutil unmountDisk force /dev/disk0
Press RETURN. Now, if this works your internal drive should be unmounted. Return to Disk Utility and try the process of removing the partition.

Center Text in Spry Menu

Hi there,
I am building a basic website using DW CS4.
I have put together a page that works without messing up the code too much:
http://rcconnelly.net/900Fixed2.html
In the Spry menu I would like to center the text vertically and
have not been able to find a tutuorial that included this tip.
Can any of you folks get me going in the right direction?
Thanks in advance!
RC

Alright I believe that you put my suggestions somewhere incorrect. These menubars can be confusing.
The easiest way to center vertically is to simply make the box that is in a size that makes the text in the middle.
By this I mean that if this is your box (the ---- is the text)
[        ]      <-----------------| Then the easiest way to make the box fit around the ----- is to get rid of the bottom [      ]
(just a figurative way of looking at the box, there is no actual division like [ ] its all just one box)
You can do that by setting a height for the boxes. The height for the boxes is controlled by a particular div element. By default the height is left blank, which usually works because then it auto formats but in your case it does not appear to be working.
We get rid of the bottom [      ] by setting the entire box's height to 35 px (which leaves enough room for the text to still show).
Here is the code you want to modify. It is the second sub section down from the top. Pay attention to the CSS notes put there by the Adobe spry designer.
/* Menu item containers, position children relative to this container and are same fixed width as parent */
ul.MenuBarVertical li
     margin: 0;
     padding: 0;
     list-style-type: none;
     font-size: 100%;
     position: relative;
     text-align: left;
     cursor: pointer;
     width: 175px;
        height: 35px;
     border-top-style: none;
     border-right-style: none;
     border-bottom-style: none;
     border-left-style: none;
If this does not work (make sure to update the live view or click the little globe icon to preview in
a browser, or right click on the home page in your local files and click put to view on your actual remote
server)then there might be another problem via a div box from the layout that is overriding it. If what I said
above does not work then try visiting this part in the test stylesheet, and modify both the padding and
width and height to see if that is the problem. The spry vertical menu might be trying to expand itself to fit in
that div or another div somewhere on the page.
.twoColFixLtHdr #sidebar1 {
     float: left; /* since this element is floated, a width must be given */
     width: 200px; /* the background color will be displayed for the length of the content in the column, but no further */
     padding: 15px 10px 15px 20px;
     background-color: #F5E7B6;
I hope this all helped. If not, then I'm sorry- it's kind of hard to tell you exactly what to do, its much easier just
to go through and change some stuff and troubleshoot it in dreamweaver. When messing around with the code, you should
probably make an effort to edit the actual code and not use the built in interface, because its easier to lose
track with the interface than when you actually go in and edit a part.
Also, if you are new to CSS like you said, you might want to try to grasp the basics. Here is a good page to look through:
http://www.adobe.com/devnet/dreamweaver/css.html
Good luck!

I cannot get the Menu options (file etc) or Help in updated firefox. I've got Windows Vista. I've done all the things reccomended in help pages ( i had to search for Help online!) and they don't work,

The ALT key gave no response
I found the place to tick Menu toolbar but no toolbar came up.
The Restore defaults toolbar thing doesn't have the options I want (File, print, help etc)
Beginning to think I'm going crazy

fredmcd-hotmail,
The only "Firefox symbol" I see is the one with the blue fox 'spanning" a red globe. Neither left or right click brings up options.
As I wrote initially: "When I right-click on an empty section of the Tab Strip, all I get is options for the Navigation Toolbar, the Bookmarks Toolbar, and the Add-on Bar; no Menu Bar option."

HT4976 I have followed instructions to include a second keyboard for emoticons while texting on my Ipad. It does not bring out the second keyboard nor the "globe" to be typed????

Caan someon help me find the way to be able to see the second keyboard on my texting while using Ipad?
I have followed instructions and so I have open a second keyboard for emoticons but the "globe" would not show and therefore the emoticons would not appear.

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

Help: I have a globe image with a black background...how to...

Hi,
I have a simple Earth globe image with a black stars background. I'd like to cut out the black background and get this all white....basically id like just the globe visible with no background.
http://www.ingerreime.no/inger/Images/globe.tiff
I know this is newbie question, but i have no idea how to do it. Please don't tell me i have to get photoshop???
Thanx!
David

Dave:
Terence isn't the jerk in this thread. He's was just attempting to give you a solution you can run yourself instead of having it given to you.
GraphicConverter can create a transparent file, a gif. Try the following workflow:
1 - first convert the file to a gif (use 89a) and save and reopen.
2 -select the Magic Pen and set it's sensitivity to about 40 (double click on it will bring up the setting pane).
3 - click on the black background to select all of the black.
4 - select to the Edit->Make Selection Transparent menu option.
5 - save the file.
The black will turn to a checkerboard pattern indicating transparency. If you anticipate a lot of advance editing I suggest you look at Photoshop Elements. I find it much more powerful than GC and it supports layers which is a very powerful too. Here's an example of some of the advanced editing you can do with it.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

N97 - No log-in from the VOIP service menu

I am stuck though I have followed Nokia's procedure for configuring my phone for VOIP calls: Log-in from the VOIP service menu doesn't happen. My SIP-profile is registered. However, I have two VOIP services defined (two globes) with the same name as a consequence of a problem when installing "S60 5.x SIP VoIP 3.1 Settings", then reinstalling, and I do not know how to delete one (the other displays my username correctly). Under the globe, the following text is displayed "Contact not on the contact list. To add, select 'Add fro..." and no more. My phone is a N97 RM-505 with software version 21.0.045. Would appreciate any help. Thanks

This is a peer-to-peer community, and as such is not the proper discourse for legal matters or any customer service issues.
The point of sale is always the first point of contact with regards to your warranty. The retailer are responsible (fully) for any and all warranty options a customer has available to them. The only other options are available on the 'Contact Us' page at;
http://blackberry.com/contact
Thank you for using the blackberry community forum.
Jakoby4204 New to the Community click here
Community Moderator

E7-00 how to find the menu?

I know this may sound a bit simple to a lot of you. I just bought my first smartphone, a Nokia E7-00. I also downloaded the English (and German because I live in Switzerland) user guides. I also managed to download and install the latest software for the E7. So far so good.
Here's my problem:
Both the user guides (Eng. & German) for the E7 (Bella) keep mentioning some kind of icon which looks like this:
[]O
OO
(I will call it "that icon")
This is apparently the icon for some kind of Menu. From there I should be able to e.g.
Select "that icon" > Contacts
or
Select "that icon" > Settings and Calling > Speed dialling.
or
Select "that icon" > Settings and Connectivity
etc etc.
But on my E7 I do not have any icon that looks like that anywhere, nor do I have a button called "Menu" (which the Nokia website mentions e.g. as "Select Menu > Applications"..
I am at my wits end.
When I switch it on, the E7 shows the signal strength and my Provider at top left, the antenna, a battery shape and the battery strength at top right, a "Go to Music", then beneath that, a globe, a square white box, an envelope and four heads (which wants to connect me to Facebook etc). lower down is "New Mailbox" (with Ovi etc), Phone Setup which doesn't offer me any options apart from the ringtones etc and images and at the very bottom Options ooo Call. The Options only allows me to see open applications, edit home screen, change wallpaper etc.
But no Menu with any settings.
Can anyone PLEASE help me ?
Solved!
Go to Solution.

Glad you got your problem solved! - However, I fail to see how you could not have a hardware home-button on your E7
Furthermore, imho "Belle" is more of a "downgrade" to the E7! I prefer to stick with "Anna" as are probably many many more users world-wide - I cannot think of another reason for Nokia to suddenly offer a "Belle-Demo" to "Anna"-users.
Obviously, "Belle" isn't that popular (and for good reasons, if you ask me - if I wanted an iPhone, I'd bought one! If I wanted my business phone to look like an Android-phone, I'd bought a Samsung Galaxy-something!)
@Nokia: "Belle" probably was the worst Symbian- (sorry: Nokia-) OS ever!! As the recent figures show, Nokia isn't doing so well - as you seem to be intent of p***ing off your most avid customers, you may actually have deserved this!
<end of rant 673>

Can't update PS CS5 on a Mac because of the following when I try to update thru the Help menu...

This is a screen shot of what I'm seeing....any help would be appreciated....thanks.

Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

The utility's menu isn't coming up when I press and hold r and command after restarting

I have a Macbook air and The utility's menu isn't coming up when I press and hold r and command after restarting. I'm trying to restore my mac to factory settings. I have version 10.10.2 OS X Yosemite.

Then try:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Top menu bar has disappeared

hi:
some how, the top menu has disappeared.
ESC is not bringing it back
its like firefox has gone to full screen (as when you play a video/movie) and so the top menu disappears.
but i cannot get it out of this mode.
any ideas?
thankyou for your helpf.

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
You can inspect and manage the permissions (including full screen permission) for the domain in the currently selected tab via these steps:
*Click the "Site Identity Button" (globe/padlock) on the location bar
*Click "More Information" to open Page Info
*Go to the Permissions tab
*Tools > Page Info > Permissions
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions
You can delete the permissions.sqlite file to reset all permissions.

Stopping the "Three Globes" Start-up Screen -- Part 2

Hi Experts,
As of BPC 7.0 SP3, it should be possible to stop the Three Globes startup workbook from being opened when launching BPC for Excel.
However, while the solution presented (using the COMPANY_LOGO AppSet parameter), will initially stop the Three Globes screen, it drops the user to the "Reporting" navigation.
The problem with that is that it's not the top level in the navigation tree, and consequently, the user has to click the HOME button to access the Custom Menu and BPF options... And of course, clicking the HOME button brings up our friends, the Three Globes.
Is there any way to disable the Globes but still have the user start at the right place?
Thanks for any suggestions,
Garrett
Previous "Three Globes" Threads Here:
[Re: How to change the logo, (3 Globes) on the launch page;
and here:
[Re: How to get rid of the SAP BPC 7.0 "three globes" startup screen?;

The capability to switch off the Three Globes logo page has been included with later versions with an AppSet parameter and I've used it successfully.

No globe on menu

Similar Messages

Maybe you are looking for