No HD access

I have a portege R705.  On eday it refused to boot, stating first it is loading windows, then  stating that windows has encountered a problem communicating with a device connected to the computer.  it further say that it may be caused by pulling a USB device (not present) during boot, or a hard drive failing.  It indicates a status 0xC0000E9.    
F8 does not work.  
The message clearly comes from the hard drive, Windows boot manager ( it says so on the top) so I am not sure what gives.  No USB or SD, and hard drive is alive.  
Tired to restore from the boot disk - got only to a "grub" prompt, and I have no documentation whatsoever about how to use Grub.  
Tried to restore from the restore disk - I get a cursor arrow over a black screen.  
any advice?
Shalom

Which Portege R705? See the label on the bottom.
stating first it is loading windows, then  stating that windows has encountered a problem communicating with a device connected to the computer.  it further say that it may be caused by pulling a USB device (not present) during boot, or a hard drive failing.  It indicates a status 0xC0000E9
We need pictures of that. Maybe from a digital camera?
Tired to restore from the boot disk
What disc is that? Please explain thoroughly.
Do you have a system repair disc?
got only to a "grub" prompt
Tell us much more about the history of that laptop. GRUB is the master boot record for a Linux operating system.
Tried to restore from the restore disk
What restore disc? Please be specific. Are you talking about Toshiba recovery discs for that model?
-Jerry

Similar Messages

  • Why self-defined access sequences of free goods can not work?

    Hi gurus,
    I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
    when i used the standard access sequences ,it is OK .
    Can anybody tell me why?
    thanks in advance

    Dear Sandy,
    Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
    Make sure that these fields are flowing in your sales order.
    I hope this will help you,
    Regards,
    Murali.

  • Partner application access to portal login info

    How can an SSO partner application (Java) tell whether or not a user has logged in to Portal?
    I need to log activity in a public application servlet, so I'd like to log the user as PUBLIC if not logged in or as their actual userid.
    I don't seem to have access to this info until the user has visited a secure part of the app.
    Any pointers would be appreciated.
    Thanks
    Rob

    DIY answer ...
    The cludge I used to get round this was ...
    Make a PL/SQL item which displays a Login or Logout link as appropriate, based on the current userid from portal.wwctx_api.get_user.
    The login link goes to a secure portal page called FORCE_LOGIN, passing a URL parameter called nextPageURL which contains the URL of the next page to show after the login is complete. You can use portal.wwpro_api_parameters.get_value( '_pageid', 'a'); to help build the current page URL if you want to retun to the current page.
    The FOIRCE_LOGIN page contains a PL/SQL item which builds an IFRAME whos src is a URL to my app servlet ForceLoginServlet, passing on the nextPageURL parameter. Use portal.wwpro_api_parameters.get_value( 'nextPageURL', 'a'); to help with that.
    The ForceLoginServlet is a secure servlet (set up in web.xml) so that forces a silent authentication to my app. All the servlet does is display HTML to redirect back to the URL in nextPageURL.
    Horrible! But it does the job.
    Anyone who know a better way of doing this, please tell me.
    Rob

  • How to allow access to web service running under ApplicationPoolIdentity

    Hi All,
    I have a WCF web service hosted in IIS 7 (or maybe 7.5, whichever comes with Windows server 2008 R2) using DefaultAppPool running under ApplicationPoolIdentity per Microsoft's recommendation. The web service needs to call a stored procedure to insert data
    to a db. The web server is on a different VM than the database server. The db server is running SQL 2008 R2. Both VMs run Windows server 2008 R2.
    When the web service tries to connect to db, it encounters this exception:
    Exception in InsertToDb()System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
    Here's the connection string in web.config:
    Application Name=somewebservice;Server=somewebserver;Integrated Security=SSPI;Database=somedatabase;Connection Timeout=60"
    How should I configure SQL security to make this work?
    Thanks in advanced.

    Thanks for the link Dan. Maybe I'm the one who cause the confusion :)
    If I understand you(and Erland) correctly, you suggest using a custom, domain account for application pool identity. However, if we do that, our IT will need to maintain those accounts, and they don't  want that. So I'm choosing a built-in account called
    ApplicationPoolIdentity as the application pool identity, but it's not working. Network Service, on the other hand, works, but my boss wants us to follow MS's best practice.
    What's puzzling is that according to this: http://learn.iis.net/page.aspx/624/application-pool-identities/, both Network Service and ApplicationPoolIdentity uses machine account to access network resource (like db in this case), but in my case, Network Service
    works, but not ApplicationPoolIdentity.
    Hallo Stephen,
    with respect - it seems to me that only idiots are working at your IT ;)... It is absolutely useful to work with "service accounts" created within the domain. That's the only way to manage and control accounts!
    If you want to "pass through" the identity of the web user (SSO) you have to check whether the app pool is set to "allow impersonate". As far as I understand the ApplicationPoolIdentity-function the app pool will create a unique user named as the service.
    I assume that will not work with the connection to the sql server because this user is unknown.
    Local Service will not work because it's restriction is located to the local machine.
    Network Service will work because access to network resources will be available.
    So my recommendation is to use a dedicated service account or impersonation:
    http://msdn.microsoft.com/en-us/library/xh507fc5.aspx
    Uwe Ricken
    MCITP Database Administrator 2005
    MCITP Database Administrator 2008
    MCITS Microsoft SQL Server 2008, Database Development
    db Berater GmbH
    http://www-db-berater.de

  • How to let SAP user use SSO to access Application in DMZ?

    Hi All,
    Our J2EE application is running on a system in DMZ which can not be connected with LDAP. So I am wondering if it's possible to let SAP user use SSO to access our application.
    After talking with my colleague I think the only way is to import SSO public key to our WebAS and create user in UME and then assign user to the corresponding public key, but anybody know where to download SSP verification file or is it allowed to download and import into another system at all?
    Regards,
    Bin

    Hi,
    Take a look at this example, it uses property nodes to select tha
    active plot and then changes the color of that plot.
    If you want to make the number of plots dynamic you could use a for
    loop and an array of color boxes.
    I hope this helps.
    Regards,
    Juan Carlos
    N.I.
    Attachments:
    Changing_plot_color.vi ‏38 KB

  • How do I access the web utility with model cisco sf302-08p ?

    Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

    restore  the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

  • MS ACCESS, NULL, and '%'

    I am using a prepared statement to query my access database which contains personal data first name, last name, address, city, state, etc.... I allow the user to search the database by any of these fields (or any combination of them) by making the default values for any empty fields '%'. Here's my select statement.
    stmt =conn.prepareStatement("SELECT * FROM Data1 WHERE first_name LIKE ? AND last_name LIKE ? AND city LIKE ? ....");
    stmt.setString(1, firstNameField.getText()+"%");
    stmt.setString(2, lastNameField.getText()+"%");
    stmt.setString(3, cityField.getText()+"%");
    This worked but didn't return a record if ANY of their values are NULL. So I changed my select statement to allow for NULL values.
    stmt =conn.prepareStatement("SELECT * FROM Data1 WHERE (first_name LIKE ? OR first_name IS NULL) AND (last_name LIKE ? OR last_name IS NULL) AND (city LIKE ? OR city IS NULL) ....");
    stmt.setString(1, firstNameField.getText()+"%");
    stmt.setString(2, lastNameField.getText()+"%");
    stmt.setString(3, cityField.getText()+"%");
    This fixed that problem, but now it ALWAYS returns the records with NULL fields. I want it to only match NULL fields if the coressponding JTextField is left blank. Can anyone tell me a good way to do this?

    How can I create it dynamically and still keep the
    speed of a prepared statement??Unless you are doing block inserts in a loop you are probably not going to see any speed improvement anyways.
    But as I said you can simply create all the combinations and then use an array to keep track of them.

  • Sharepoint foundation 2010 externel https access problems

    I have a very strange problem with my sharepoint foundation 2010 site.
    I have a site which is accessible from outside on https (we have a valid certificate). I configured IIS for http and https.
    Also I configured internal and externel access for this site on sharepoint.
    But sometimes, the site is not accessible from outside on https with (externe.site.fr), BUT  it will be accessible with public ip !!!
    And also accessible from inside. (with interne.intranet.site.fr)
    Any Idea ?
    thanks

    Hi,
    According to your post, my understanding is that your site is not accessible from outside using external host name with https sometimes.
    As your site can be accessible with public IP, however it can’t be accessible from outside using external host name with https sometimes, the issue could be caused by the gateway server in your environment.
    I suggest that you need to check the gateway server configuration.
    For more information, you can refer to:
    http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2012/12/05/how-to-set-up-microsoft-forefront-unified-access-gateway-environment-for-sharepoint-2013.aspx
    http://nhutcmos.wordpress.com/2013/07/26/configure-ssl-certificate-for-sharepoint-external-https-access/
    http://sharepointdotnetwiki.iblogger.org/2009/12/dns-setup-in-sharepoint/
    http://underthehood.ironworks.com/2010/06/making-a-sharepoint-2010-site-externally-available-alternate-access-mappings-host-header-bindings.html
    Best Regards,
    Yumi Fu

  • When I login to my bank, I get the message: 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. Have new MacBook Air with Yosemite. How to solve this problem?

    When I try to login to the website of my bank, I get the following error message:
    403 - Forbidden: Access is denied.
    You do not have permission to view this directory or page using the credentials that you supplied.
    I have a new MacBook Air with OS Yosemite installed.
    What is the problem and how can I solve it?

    Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
    Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
    The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
    Back up all data.
    Double-click anywhere in the line below on this page to select it:
    com.apple.idms.appleid.prd
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
    Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
    The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
    Credit for this idea to Christian Braukmueller of SAP.

  • When i login with microsoft account cannot access with administrative share c$

    i have a problem when i login to windows with microsoft account cannot access any network computer with administrative sharing c$,d$ with windows 8.1 
    but when i login with local account can access
    and some people tell  me create key in regedit t fix it 
    after enter user name and password show this error 
    and i apply your instruction  and not fix until now
    note:
     my Machine windows 8.1 if another machine in network windows 7 can access a hidden share if machine in network windows 8.1 show this message in image 2 
    but if i login with local user can i access all machine hidden share network windows 7 and 8.1

    yes this computer i want to access  name poland2-work and have two users 
    first :administrator
    second : poland 2

  • Gmail access fails on safari. But it works when i login as administrator. Please help!

    I am unable to use gmail from a regular user account on my iMac.It fails with an error string that ends with "... becasue Safari can't establish a secure connection to the server "accounts.google.com". "
    I have tried resetting safari and it does not help.
    I have tried adding DNS entries based on some discussion board suggestions and that does not help either.
    I am able to access gmail as an administator on the same machine though!
    Please point me in the right direction, please! Thanks!

    You may have to take the computer to the Apple store to have the computer checked out.
    Dead line is tuesday?
    1. Try an external USB keyboard.
    2. This may help.
        http://support.apple.com/kb/PH10680
    3. Virtual keyboard
        There is a virtual keyboard available in OS X 10.8.4
        System Preferences > Keyboard
        Checkmark the box beside "Show Keyboard & Character Viewrs in menu bar.
        Click "Input Sources"  and then "Show input menu in menu bar".
    Best.

  • Remote Access VPN Clients Cannot Access inside LAN

    I have been asked to set up remote access VPN on an ASA 5505 that I previously had no invlovement with.  I have set it up the VPN using the wizard, they way I normally do, but the clients have no access to anything in the inside subnet, not even the inside interface IP address of the ASA.  Thay can ping each other.  The remote access policy below that I am working on is labeled VPNPHONE, address pool 172.16.20.1-10.  I do not need split tunneling to be enabled.  The active WAN interface is the one labeled outside_cable.
    : Saved
    ASA Version 8.2(1)
    hostname ASA5505
    domain-name default.domain.invalid
    enable password eelnBRz68aYSzHyz encrypted
    passwd eelnBRz68aYSzHyz encrypted
    names
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.100.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    pppoe client vpdn group dataDSL
    ip address 76.244.75.57 255.255.255.255 pppoe
    interface Vlan3
    nameif dmz
    security-level 50
    ip address 192.168.9.1 255.255.255.0
    interface Vlan10
    nameif outside_cable
    security-level 0
    ip address 50.84.96.178 255.255.255.240
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    switchport access vlan 10
    interface Ethernet0/2
    switchport access vlan 3
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    ftp mode passive
    clock timezone CST -6
    clock summer-time CDT recurring
    dns server-group DefaultDNS
    domain-name default.domain.invalid
    same-security-traffic permit intra-interface
    object-group service Netbios udp
    port-object eq 139
    port-object eq 445
    port-object eq netbios-ns
    object-group service Netbios_TCP tcp
    port-object eq 445
    port-object eq netbios-ssn
    object-group network DM_INLINE_NETWORK_1
    network-object host 192.168.100.177
    network-object host 192.168.100.249
    object-group service Web_Services tcp
    port-object eq ftp
    port-object eq ftp-data
    port-object eq www
    port-object eq https
    object-group network DM_INLINE_NETWORK_10
    network-object host 192.168.9.10
    network-object host 192.168.9.4
    object-group network DM_INLINE_NETWORK_11
    network-object host 192.168.9.10
    network-object host 192.168.9.4
    object-group network DM_INLINE_NETWORK_2
    network-object host 192.168.9.10
    network-object host 192.168.9.4
    object-group network DM_INLINE_NETWORK_3
    network-object host 192.168.9.10
    network-object host 192.168.9.4
    object-group network DM_INLINE_NETWORK_4
    network-object host 192.168.9.10
    network-object host 192.168.9.4
    object-group network DM_INLINE_NETWORK_5
    network-object host 192.168.9.10
    network-object host 192.168.9.4
    object-group network DM_INLINE_NETWORK_6
    network-object host 192.168.9.10
    network-object host 192.168.9.4
    object-group network DM_INLINE_NETWORK_7
    network-object host 192.168.9.10
    network-object host 192.168.9.4
    object-group network DM_INLINE_NETWORK_8
    network-object host 192.168.9.10
    network-object host 192.168.9.4
    object-group network DM_INLINE_NETWORK_9
    network-object host 192.168.9.10
    network-object host 192.168.9.4
    object-group network VPN
    network-object 192.168.255.0 255.255.255.0
    access-list outside_access_in extended permit icmp any host 76.244.75.61
    access-list outside_access_in extended permit tcp any host 76.244.75.61 eq ftp
    access-list outside_access_in extended permit tcp any host 76.244.75.61 eq ftp-data
    access-list outside_access_in extended permit tcp any host 76.244.75.62 eq www
    access-list outside_access_in extended permit tcp any host 76.244.75.62 eq https
    access-list outside_access_in extended permit tcp any host 76.244.75.59 eq www
    access-list outside_access_in extended permit tcp any host 76.244.75.59 eq https
    access-list outside_access_in extended permit tcp any host 76.244.75.60 eq www
    access-list outside_access_in extended permit tcp any host 76.244.75.60 eq https
    access-list outside_access_in extended permit tcp any host 76.244.75.58 eq www
    access-list outside_access_in extended permit tcp any host 76.244.75.58 eq https
    access-list dmz_access_in remark Quickbooks
    access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_6 host 192.168.100.5 eq 56719
    access-list dmz_access_in remark Quickbooks range
    access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_7 host 192.168.100.5 range 55333 55337
    access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_8 host 192.168.100.5 eq 1434
    access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_9 host 192.168.100.5 eq 49398
    access-list dmz_access_in remark QB
    access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_10 host 192.168.100.5 eq 8019
    access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_2 host 192.168.100.5 eq 2638
    access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_11 host 192.168.100.5 object-group Netbios
    access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_3 host 192.168.100.5 object-group Netbios_TCP
    access-list dmz_access_in extended deny ip host 192.168.9.4 host 192.168.100.5 inactive
    access-list dmz_access_in extended permit udp object-group DM_INLINE_NETWORK_4 any
    access-list dmz_access_in extended permit tcp object-group DM_INLINE_NETWORK_5 any
    access-list dmz_access_in remark Printer
    access-list dmz_access_in extended permit ip 192.168.9.0 255.255.255.0 object-group DM_INLINE_NETWORK_1
    access-list dmz_access_in extended permit tcp 192.168.9.0 255.255.255.0 any object-group Web_Services
    access-list dmz_access_in extended permit udp 192.168.9.0 255.255.255.0 any eq domain
    access-list dmz_access_in extended permit icmp 192.168.9.0 255.255.255.0 192.168.255.0 255.255.255.0 echo-reply
    access-list dmz_access_in extended permit icmp 192.168.9.0 255.255.255.0 192.168.100.0 255.255.255.0 echo-reply log disable
    access-list dmz_access_in remark QB probably does not need any udp
    access-list dmz_access_in extended permit udp host 192.168.9.4 host 192.168.100.5 eq 55333 inactive
    access-list dmz_access_in remark QB included in other rule range
    access-list dmz_access_in extended permit tcp host 192.168.9.4 host 192.168.100.5 eq 55333 inactive
    access-list dmz_access_in remark May be required for Quickbooks
    access-list dmz_access_in extended permit icmp host 192.168.9.4 host 192.168.100.5
    access-list CAD_capture extended permit ip host 192.168.9.4 host 192.168.100.5
    access-list CAD_capture extended permit ip host 192.168.100.5 host 192.168.9.4
    access-list inside_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.0
    access-list inside_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.240
    access-list inside_nat0_outbound extended permit ip any 172.16.10.0 255.255.255.240
    access-list inside_nat0_outbound extended permit ip any 172.16.20.0 255.255.255.240
    access-list cad_supplies_RAVPN_splitTunnelAcl standard permit 192.168.100.0 255.255.255.0
    access-list cad_supplies_RAVPN_splitTunnelAcl standard permit 192.168.9.0 255.255.255.0
    access-list dmz_nat0_outbound extended permit ip any 192.168.255.0 255.255.255.0
    access-list outside_cable_access_in extended permit icmp any host 50.84.96.182
    access-list outside_cable_access_in extended permit tcp any host 50.84.96.182 eq ftp
    access-list outside_cable_access_in extended permit tcp any host 50.84.96.182 eq ftp-data
    access-list outside_cable_access_in extended permit tcp any host 50.84.96.183 eq www
    access-list outside_cable_access_in extended permit tcp any host 50.84.96.183 eq https
    access-list outside_cable_access_in extended permit tcp any host 50.84.96.180 eq www
    access-list outside_cable_access_in extended permit tcp any host 50.84.96.180 eq https
    access-list outside_cable_access_in extended permit tcp any host 50.84.96.181 eq www
    access-list outside_cable_access_in extended permit tcp any host 50.84.96.181 eq https
    access-list outside_cable_access_in extended permit tcp any host 50.84.96.179 eq www
    access-list outside_cable_access_in extended permit tcp any host 50.84.96.179 eq https
    access-list Local_LAN_Access standard permit host 0.0.0.0
    access-list vpnusers_spitTunnelACL extended permit ip 192.168.100.0 255.255.255.0 any
    access-list nonat-in extended permit ip 192.168.100.0 255.255.255.0 172.16.20.0 255.255.255.0
    pager lines 24
    logging enable
    logging buffered informational
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    mtu dmz 1500 
    mtu outside_cable 1500
    ip local pool VPN_IP_range 192.168.255.1-192.168.255.10 mask 255.255.255.0
    ip local pool VPN_Phone 172.16.20.1-172.16.20.10 mask 255.255.255.0
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    nat-control
    global (outside) 10 interface
    global (outside_cable) 10 interface
    nat (inside) 0 access-list nonat-in
    nat (inside) 10 0.0.0.0 0.0.0.0
    nat (dmz) 0 access-list dmz_nat0_outbound
    nat (dmz) 10 0.0.0.0 0.0.0.0
    static (inside,outside) 76.244.75.62 192.168.100.25 netmask 255.255.255.255 dns
    static (dmz,outside) 76.244.75.61 192.168.9.123 netmask 255.255.255.255 dns
    static (dmz,outside) 76.244.75.59 192.168.9.124 netmask 255.255.255.255 dns
    static (dmz,outside) 76.244.75.58 192.168.9.4 netmask 255.255.255.255 dns
    static (inside,dmz) 192.168.100.0 192.168.100.0 netmask 255.255.255.0
    static (dmz,outside) 76.244.75.60 192.168.9.10 netmask 255.255.255.255 dns
    static (inside,outside_cable) 50.84.96.183 192.168.100.25 netmask 255.255.255.255 dns
    static (dmz,outside_cable) 50.84.96.182 192.168.9.123 netmask 255.255.255.255 dns
    static (dmz,outside_cable) 50.84.96.180 192.168.9.124 netmask 255.255.255.255 dns
    static (dmz,outside_cable) 50.84.96.179 192.168.9.4 netmask 255.255.255.255 dns
    static (dmz,outside_cable) 50.84.96.181 192.168.9.10 netmask 255.255.255.255 dns
    access-group outside_access_in in interface outside
    access-group dmz_access_in in interface dmz
    access-group outside_cable_access_in in interface outside_cable
    route outside_cable 0.0.0.0 0.0.0.0 50.84.96.177 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    http 192.168.100.0 255.255.255.0 inside
    http 204.107.173.0 255.255.255.0 outside
    http 204.107.173.0 255.255.255.0 outside_cable
    http 0.0.0.0 0.0.0.0 outside_cable
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
    crypto map outside_cable_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_cable_map interface outside_cable
    crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map outside_map interface outside
    crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map inside_map interface inside
    crypto isakmp enable inside
    crypto isakmp enable outside
    crypto isakmp enable outside_cable
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 30
    authentication pre-share
    encryption 3des
    hash md5
    group 2
    lifetime 86400
    telnet 192.168.100.0 255.255.255.0 inside
    telnet timeout 5
    ssh 192.168.100.0 255.255.255.0 inside
    ssh 204.107.173.0 255.255.255.0 outside
    ssh 204.107.173.0 255.255.255.0 outside_cable
    ssh 0.0.0.0 0.0.0.0 outside_cable
    ssh timeout 15
    console timeout 0
    vpdn group dataDSL request dialout pppoe
    vpdn group dataDSL localname [email protected]
    vpdn group dataDSL ppp authentication pap
    vpdn username [email protected] password *********
    dhcpd address 192.168.100.30-192.168.100.99 inside
    dhcpd dns 192.168.100.5 68.94.156.1 interface inside
    threat-detection basic-threat
    threat-detection statistics port
    threat-detection statistics protocol
    threat-detection statistics access-list
    threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
    webvpn
    group-policy DefaultRAGroup internal
    group-policy DefaultRAGroup attributes
    dns-server value 192.168.100.5
    vpn-tunnel-protocol IPSec l2tp-ipsec
    group-policy cad_supplies_RAVPN internal
    group-policy cad_supplies_RAVPN attributes
    vpn-tunnel-protocol IPSec
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value cad_supplies_RAVPN_splitTunnelAcl
    group-policy VPNPHONE internal
    group-policy VPNPHONE attributes
    dns-server value 192.168.100.5
    vpn-tunnel-protocol IPSec
    split-tunnel-policy excludespecified
    split-tunnel-network-list value Local_LAN_Access
    client-firewall none
    client-access-rule none
    username swinc password BlhBNWfh7XoeHcQC encrypted
    username swinc attributes
    vpn-group-policy cad_supplies_RAVPN
    username meredithp password L3lRjzwb7TnwOyZ1 encrypted
    username meredithp attributes
    vpn-group-policy cad_supplies_RAVPN
    service-type remote-access
    username ipphone1 password LOjpmeIOshVdCSOU encrypted privilege 0
    username ipphone1 attributes
    vpn-group-policy VPNPHONE
    username ipphone2 password LOjpmeIOshVdCSOU encrypted privilege 0
    username ipphone2 attributes
    vpn-group-policy VPNPHONE
    username ipphone3 password LOjpmeIOshVdCSOU encrypted privilege 0
    username ipphone3 attributes
    vpn-group-policy VPNPHONE
    username oethera password WKJxJq7L6wmktFNt encrypted
    username oethera attributes
    vpn-group-policy cad_supplies_RAVPN
    service-type remote-access
    username markh password nqH+bk6vj0fR83ai0SAxkg== nt-encrypted
    username markh attributes
    vpn-group-policy cad_supplies_RAVPN
    tunnel-group DefaultRAGroup general-attributes
    default-group-policy DefaultRAGroup
    tunnel-group DefaultRAGroup ipsec-attributes
    pre-shared-key *
    tunnel-group DefaultRAGroup ppp-attributes
    authentication ms-chap-v2
    tunnel-group cad_supplies_RAVPN type remote-access
    tunnel-group cad_supplies_RAVPN general-attributes
    address-pool VPN_IP_range
    default-group-policy cad_supplies_RAVPN
    tunnel-group cad_supplies_RAVPN ipsec-attributes
    pre-shared-key *
    tunnel-group VPNPHONE type remote-access
    tunnel-group VPNPHONE general-attributes
    address-pool VPN_Phone
    default-group-policy VPNPHONE
    tunnel-group VPNPHONE ipsec-attributes
    pre-shared-key *
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum 1500
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect sqlnet
      inspect skinny 
      inspect sunrpc
      inspect xdmcp
      inspect sip 
      inspect netbios
      inspect tftp
    service-policy global_policy global
    prompt hostname context
    Cryptochecksum:8b25ecc61861a2baa6d2556a3679cc7c
    : end

    Hi,
    You have your "group-policy" set so that you have excluding some networks from being tunneled.
    In this access-list named Local_LAN_Access you specify "0.0.0.0"
    Doesnt this mean you are excluding all networks from being tunneled? In other words no traffic goes to your tunnel.
    This access-list should only contain your local LAN network from where you are connecting with the VPN Client. If you dont need to access anything on your local LAN while having the VPN on, you don't even need this setting on. You could just tunnel all traffic instead of excluding some networks.
    - Jouni

  • ASA 5505 VPN client LAN access problem

    Hello,
    I'm not expert in ASA and routing so I ask some support the following case.
    There is a Cisco VPN client (running on Windows 7) and an ASA5505.
    The goals are client could use remote gateway on ASA for Skype and able to access the devices in ASA inside interface.
    The Skype works well but I cannot access devices in the interface inside via VPN connection.
    Can you please check my following config and give me advice to correct NAT or VPN settings?
    ASA Version 7.2(4)
    hostname ciscoasa
    domain-name default.domain.invalid
    enable password wDnglsHo3Tm87.tM encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.1.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address dhcp setroute
    interface Vlan3
    no forward interface Vlan1
    nameif dmz
    security-level 50
    no ip address
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    ftp mode passive
    dns server-group DefaultDNS
    domain-name default.domain.invalid
    same-security-traffic permit inter-interface
    same-security-traffic permit intra-interface
    access-list inside_access_in extended permit tcp 192.168.1.0 255.255.255.0 any
    access-list inside_access_in extended permit udp 192.168.1.0 255.255.255.0 any
    access-list outside_access_in extended permit ip any 192.168.1.0 255.255.255.0
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    mtu dmz 1500
    ip local pool VPNPOOL 10.0.0.200-10.0.0.220 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-524.bin
    no asdm history enable
    arp timeout 14400
    nat-control
    global (outside) 1 interface
    nat (inside) 1 10.0.0.0 255.255.255.0
    nat (inside) 1 192.168.1.0 255.255.255.0
    nat (outside) 1 10.0.0.0 255.255.255.0
    access-group inside_access_in in interface inside
    access-group outside_access_in in interface outside
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    aaa authentication ssh console LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto dynamic-map outside_dyn_map 20 set pfs group1
    crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
    crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
    crypto map outside_map interface outside
    crypto isakmp enable outside
    crypto isakmp policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh 192.168.1.0 255.255.255.0 inside
    ssh timeout 5
    ssh version 2
    console timeout 0
    dhcpd auto_config outside
    dhcpd address 192.168.1.2-192.168.1.33 inside
    dhcpd dns xx.xx.xx.xx interface inside
    dhcpd enable inside
    group-policy DfltGrpPolicy attributes
    banner none
    wins-server none
    dns-server value 84.2.44.1
    dhcp-network-scope none
    vpn-access-hours none
    vpn-simultaneous-logins 3
    vpn-idle-timeout 30
    vpn-session-timeout none
    vpn-filter none
    vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
    password-storage disable
    ip-comp disable
    re-xauth disable
    group-lock none
    pfs disable
    ipsec-udp disable
    ipsec-udp-port 10000
    split-tunnel-policy tunnelall
    split-tunnel-network-list none
    default-domain none
    split-dns none
    intercept-dhcp 255.255.255.255 disable
    secure-unit-authentication disable
    user-authentication disable
    user-authentication-idle-timeout 30
    ip-phone-bypass disable
    leap-bypass disable
    nem enable
    backup-servers keep-client-config
    msie-proxy server none
    msie-proxy method no-modify
    msie-proxy except-list none
    msie-proxy local-bypass disable
    nac disable
    nac-sq-period 300
    nac-reval-period 36000
    nac-default-acl none
    address-pools none
    smartcard-removal-disconnect enable
    client-firewall none
    client-access-rule none
    webvpn
      functions url-entry
      html-content-filter none
      homepage none
      keep-alive-ignore 4
      http-comp gzip
      filter none
      url-list none
      customization value DfltCustomization
      port-forward none
      port-forward-name value Application Access
      sso-server none
      deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information
      svc none
      svc keep-installer installed
      svc keepalive none
      svc rekey time none
      svc rekey method none
      svc dpd-interval client none
      svc dpd-interval gateway none
      svc compression deflate
    group-policy XXXXXX internal
    group-policy XXXXXX attributes
    vpn-tunnel-protocol IPSec
    split-tunnel-policy tunnelall
    split-tunnel-network-list none
    username XXXXXX password G910DDfbV7mNprdR encrypted privilege 15
    username XXXXXX password 5p9CbIe7WdF8GZF8 encrypted privilege 0
    username XXXXXX attributes
    vpn-group-policy XXXXXX
    username XXXXX password cRQbJhC92XjdFQvb encrypted privilege 15
    tunnel-group XXXXXX type ipsec-ra
    tunnel-group XXXXXX general-attributes
    address-pool VPNPOOL
    default-group-policy XXXXXX
    tunnel-group XXXXXX ipsec-attributes
    pre-shared-key *
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect icmp
    service-policy global_policy global
    prompt hostname context
    Cryptochecksum:a8fbb51b0a830a4ae823826b28767f23
    : end
    ciscoasa#
    Thanks in advance!
    fbela

    config#no nat (inside) 1 10.0.0.0 255.255.255.0 < This is not required.
    Need to add - config#same-security-traffic permit intra-interface
                                     #access-list extended nonat permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0
                                     #nat (inside) 0 access-list nonat
    Please add and test it.
    Thanks
    Ajay

  • Asa 5505, the outside cant access to a server in the inside

    hi, i have an Asa 5505, a pc in the outside with the ip 10.1.1.6 cant access to a server in the inside 192.168.1.4, pls help...
    this is my conf:
    ASA Version 8.0(4)
    hostname ciscoasa
    domain-name default.domain.invalid
    enable password 8Ry2YjIyt7RRXU24 encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    names
    interface Vlan1
    nameif inside
    security-level 0
    ip address 192.168.1.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address 10.1.1.2 255.255.255.0
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    boot system disk0:/asa804-k8.bin
    ftp mode passive
    dns server-group DefaultDNS
    domain-name default.domain.invalid
    object-group protocol TCPUDP
    protocol-object udp
    protocol-object tcp
    access-list 100 extended permit tcp any host 10.1.1.3 eq www
    pager lines 24
    logging enable
    logging asdm debugging
    mtu inside 1500
    <--- More --->
    mtu outside 1500
    no failover
    icmp unreachable rate-limit 1 burst-size 1
    asdm image disk0:/asdm-613.bin
    no asdm history enable
    arp timeout 14400
    nat-control
    global (outside) 1 interface
    nat (inside) 1 0.0.0.0 0.0.0.0
    static (inside,outside) 10.1.1.3 192.168.1.4 netmask 255.255.255.255
    access-group 100 in interface outside
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    dynamic-access-policy-record DfltAccessPolicy
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    <--- More --->
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd auto_config outside
    dhcpd address 192.168.1.2-192.168.1.254 inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
    message-length maximum 512
    policy-map global_policy
    class inspection_default
    inspect dns preset_dns_map
    inspect ftp
    <--- More --->
    inspect h323 h225
    inspect h323 ras
    inspect rsh
    inspect rtsp
    inspect esmtp
    inspect sqlnet
    inspect skinny
    inspect sunrpc
    inspect xdmcp
    inspect sip
    inspect netbios
    inspect tftp
    service-policy global_policy global
    prompt hostname context
    Cryptochecksum:14e7b74fabc386613ae646b915f60e9e
    : end
    ciscoasa#

    Andres
    The security level for your inside interface should be 100 ie.
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.1.1 255.255.255.0
    After changing that can you
    1) ping the outside interface of the ASA from the pc or ping the PC from the ASA
    2) I'm assuming you are trying to connect to 10.1.1.3 when you attempt the connection ?
    Jon

  • New MBP - wireless/internet access networking problem - a summary!

    Greetings!
    New MBP here, with all the trimmings (MacOS X 10.4.10 - Safari 3 Beta). New also to the Apple/MAC world
    MBP >> wireless networking into a Linksys WRT54G router and >> thru HughesNet DW7000 Satellite Internet connection (not the fastest, but hey, the US and especially rural areas are NOT S. Korea when it comes to speedy internet connections!
    Frankly, I bought into it for two reasons: First, hearing about the vaunted Mac a/v/ and doc/photo editing capabilities,... and about MacOS stability, etc... Well, it all needs a little work still: on the part of new users like me, but also probably on the part of the Apple/Mac people as well. 2nd reason I decided to purchase the MBP - i.e. ability to run Windows (I have not yet tried BootCanp, etc...: still resolving preliminary issues!). I still live in a heavy Win environment at my business - no other way of course!
    Communications issues seem to still prevail: I am hanging out at several VERY HELPFUL forums (AppleDiscussionForum, MacRumorsForums, etc...) and the same issues keep popping up. Im my case, same as all above reported, with a few additional points, as follows:
    1. Xmission errors: seem to be - at least in my case - a constant factor, regardless on how close/far i am from my wireless router. For example, I would be attempting to dwnload an upgrade (large)QT or MacOS file. i am barely into the dowmoad, and I already have several Read/Send errors. By the end of the download, I will have probably about 15 Rcv and 5 Send errors. Never gets quite that bad in my Win machines, I must mention. Anything to do here (I know, there are such things always affecting wireless com). AND, MOST importantly, how that this affect the effectiveness of the upgrade (I spotted same thing with MacOS 10.4.10 and Safari Beta 3 upgrade downloads!). Would it be likely that applying upgrades in such circumstances would screw up the OS??? Could OTOH such errors be automatically "compensated" by re-xmits from the source, and eventually the download would be OK? Because quite frankly, I do NOT know if my important upgrade download was OK to apply to the system, given those errors!!!
    Also same thing with PING errors. Quite frequent when pinging another device on my network.
    2. Quite often, accessing a site will proceed somehow OK, and then things will get stuck twd the end, as if some buffer somewhere gets overloaded??? Of course, as elsewhere reported, same can often happen with com getting stuck right over the "www" part of the URL!
    3. AND, of course, the often reported "NO connection to the Internet", but computer shows good signal level and connection otherwise.
    4. Strangely enough, seems that the Airport Extreme wifi card sort of "warms up the the internet" as one proceeds to start using it. It eventually picks up on a network, and often "improves" its connection over time!
    5. Built in Airport Extreme seems to not exhibit up all immediately surrounding networks. Sensitivity issue?? iStumbler does.
    6. iStumbler permanently posts noise level of 9% regardless of how close to my wireless router/broadband modem I am. Anyone uses iStumbler to monitor network traffic?
    This is getting longuish: I just want to get over all those p*ant issues and get into putting my a/v stuff together!!
    - Roger T
    Thanks for just reading all this!. I am not sure it is all fixable (back to the Win "features" terminology, really meaning "bugs"??)

    Thanks, BDaqua. This support forum is quite well stocked: I have been perusing all its nooks and cranies!
    On the www.dslreports.com - All things Mac - forum, I spotted a couple of mentions of the following type of infromation:
    link: »www.hardmac.com/news/2007-07-27/#7039
    - The first TechNote provides information concerning the Airport problem affecting the MBP Santa Rosa (but also other Mac Intel). When used on battery, the wireless connection drops and one can even experience kernel panic. Apple Centers are asked not to exchange affected notebook as this is due to a unidentified bug in the Atheros driver, and should be fixed in the future with a simple Airport system update. So for the moment, unfortunate users are asked to directly power their notebook when using wireless network, or using Ethernet connection when running on battery... in other words, turn your notebook into a desktop
    to forum · permalink
    I am wondering if you and folks on this close-to-Apple forum know anything about this. At least, we could just await remedy instead of messing around endlessly looking for solutions and... pondering as to whether it was a wise thing to purchase an expensive machine which happens to have trouble communicating online. After all, seems that the Mac folks are prone to spend MORE time online uploading/downloading music and videos instead of my being normally doing with the rest of my (Win) computers, i.e. work on customer lists, correspondence, inventories, accounting, data bases, etc....
    So, seems to me we do have a pb and Apple might just save a few $$$ on silly ads and get to work on com instead. if nothing else to avoid the appearance of further - admittedly rather funny - ad-spoofs!
    So back to your further inquiry. I run a wireless network from a HughesNet satellite modem, thru a Linksys WRT54GL wireless router, into some nearby office LANed desktops and point of sale equipment, to another neighbouring facility via wireless bridge, and to my Mac laptop. Distance from the laptop to the router: 50 ft max.
    It all works surprizingly very well: up to 200kbps up and 1000 kbps down (in prime time, 150 up and 600 down). OK, my set up looks complex and incurring LOTS of activity. Actually, online activity is quite minimal and well scheduled - right now I am the only machine on the network online. Otherwise, our office processes online money wiring for customers among other things.
    I'll try your DNS server choice on the Mac settings first. Will report accordingly.
    Thanks for everything!
    - Roger T

  • I am trying to import developed images from LightRoom 5 in o Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file.  Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this?  I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand.   Thanks.

    Have you tried restoring the Preferences yet?

Maybe you are looking for

  • Inability to submit Problem Report for Mac OS X kernel

    the problem reporting does not work and it gives me thing message: Submission failed. Your report could not be submitted. Please try again later.

  • Attaching Max Resolution Photos to Mail

    How do I attach a full rez photo (from iPhoto) to an outgoing mail? Attaching a reduced size version is straightforward but I can't figure out how to attach the original... Thanks Nick (new to Mac!)

  • Cant Sign into Oracle Buisness Intelligence Analytics

    Hi I just installed Oracle Business Intelligence 11.1.1.3.0 and I cant sign in ... I am trying to sign in using the default login "weblogic" with the password i specified but that is not working... at the address http://localhost:9704/analytics What

  • Exeedingly basic question about AirPort functionality . . .

    Before I start digging into PDF manuals, I thought I'd ask if what I'm interested in is even possible. Thanks in advance for the information. If I connect an external hard disk to my AirPort (via USB), obviously I can set it up to be accessible to an

  • Help needed with discoverer PO report

    Hi Guys, Need some help with discoverer 4i report. There is a workbook in discoverer which runs and displays output depending on the parameters. The report is related to PO Requisitions (displays all the details related to the requisition). For ex:-