"No hostname set" error in console log - DNS problem

We are running a MacPro on 10.4.8 server software (mainly for filing, not for hosting domains) and lately it has been coming up with the same error as below. What happens is that it will kick off every user and sometimes the server computer will freeze up and eventually restart itself.
May 22 14:31:50 Server servermgrd: servermgr_dns: no name available via DNS for 192.168.0.XX
May 22 14:31:50 Server servermgrd: servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair
When I type in "hostname" in terminal, this is what I get:
Server.local
When I type in "uname -a" in terminal, this is what I get:
Darwin Server.local 8.8.1 Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386 i386 i386
Any ideas?
MacPro Mac OS X (10.4.8) Server OSX
MacPro Mac OS X (10.4.8) Server OSX
MacPro   Mac OS X (10.4.8)   Server OSX

I had the EXACT same problem and here is how I fixed it.
Open terminal and type:
hostname
then type in:
sudo scutil --get HostName
Compare the output of the two commands.
I had a capitalization difference.
(example: servername01 and SERVERNAME01 are NOT the same thing)
If there is a difference run this command:
sudo scutil --set HostName <hostname.domain.tld>
Set it to the output of hostname, if that is the correct name. You must use a fully qualified domain name when you do the 'set'. (example: myserver.mydomain.com)
Hope this helps!

Similar Messages

  • Why am I getting "SLOWDOWN" errors in Console Log ?

    I'm getting the following "SLOWDOWN" errors in Console Log. Can you please check the following log and kindly please tell me why ?
    Mar 24 13:35:32 Georges-MacBook-Pro.local AirMail Beta[3494]: Could not launch query, mds might have an issue
    Mar 24 13:37:04 Georges-MacBook-Pro.local fseventsd[49]: SLOWDOWN: client 0x7fc383000600 (pid 65) sleeping due to too many errors (num usleeps 312)
    Mar 24 13:18:25 Georges-MacBook-Pro.local UserEventAgent[11]: Captive: en1: Maintaining 'Second Cup - WiFi'
    Mar 24 13:18:26 Georges-MacBook-Pro.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated (__BUILTIN__)
    Mar 24 13:19:36 Georges-MacBook-Pro.local login[6192]: DEAD_PROCESS: 6192 ttys000
    Mar 24 13:19:55 Georges-MacBook-Pro.local AirMail Beta[3494]: [***ERROR***] CheckFolderNgx Cannot FolderInfo POS -1] ROWID 15] INBOX st:1 sel:1 [email protected] Error Domain=MCOErrorDomain Code=11 "The requested folder does not exist.  Folder selection failed" UserInfo=0x600001675d00 {NSLocalizedDescription=The requested folder does not exist.  Folder selection failed} IMAP > Name:0)[Operation_0] [email protected]
    Mar 24 13:19:55 Georges-MacBook-Pro.local AirMail Beta[3494]: [***ERROR***] Error StartUpdate INBOX [email protected] Error Domain=MCOErrorDomain Code=11 "The requested folder does not exist.  Folder selection failed" UserInfo=0x600001675d00 {NSLocalizedDescription=The requested folder does not exist.  Folder selection failed}
    Mar 24 13:20:09 Georges-MacBook-Pro.local fseventsd[49]: SLOWDOWN: client 0x7fc383000600 (pid 65) sleeping due to too many errors (num usleeps 215)
    Mar 24 13:20:55 Georges-MacBook-Pro.local AirMail Beta[3494]: [***ERROR***] CheckFolderNgx Cannot FolderInfo POS -1] ROWID 15] INBOX st:1 sel:1 [email protected] Error Domain=MCOErrorDomain Code=3 "Unable to parse response from server." UserInfo=0x600000e62300 {NSLocalizedDescription=Unable to parse response from server.} IMAP > Name:0)[Operation_0] [email protected]
    Mar 24 13:20:55 Georges-MacBook-Pro.local AirMail Beta[3494]: [***ERROR***] Error StartUpdate INBOX [email protected] Error Domain=MCOErrorDomain Code=3 "Unable to parse response from server." UserInfo=0x600000e62300 {NSLocalizedDescription=Unable to parse response from server.}
    Mar 24 13:22:07 Georges-MacBook-Pro.local AirMail Beta[3494]: [***ERROR***] CheckFolderNgx Cannot FolderInfo POS -1] ROWID 15] INBOX st:1 sel:1 [email protected] Error Domain=MCOErrorDomain Code=5 "Unable to authenticate with the current session's credentials." UserInfo=0x608001c704c0 {NSLocalizedDescription=Unable to authenticate with the current session's credentials.} IMAP > Name:1)[Operation_1] [email protected]
    Mar 24 13:22:07 Georges-MacBook-Pro.local AirMail Beta[3494]: [***ERROR***] [email protected] CheckAll INBOX Error Domain=MCOErrorDomain Code=5 "Unable to authenticate with the current session's credentials." UserInfo=0x608001c704c0 {NSLocalize

    Have you tried another browser? What browser are you using?
    Firefox

  • Errors in Console.log when using OfficeJet 6210

    Just ended a long, frustrating attempt to get support from HP regarding errors that appear in the console.log when scanning to PDF. They claim it's not their software -- The tech actually claimed that their software was thoroughly tested, ships bug-free and that it's 100% an Apple issue.
    Here's what gets spewed into console.log:
    Merely starting the application:
    2006-05-03 15:18:35.377 HP Device Manager[488] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Applications/Hewlett-Packard/HP Device Manager.app/Contents/Resources/Action.tif
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:35.392 HP Device Manager[488] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Applications/Hewlett-Packard/HP Device Manager.app/Contents/Resources/Action.tif
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:35.690 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    Registering transport IIOP1.0 Info
    Registering transport USBIOP1.0 Info
    2006-05-03 15:18:36.147 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:36.149 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:36.164 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:36.194 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:36.212 HP Scan and Archive[489] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:18:36.521 HP Scan and Archive[489] CFLog (0): CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    2006-05-03 15:18:38.378 HP Scan and Archive[489] WARNING: _wrapRunLoopWithAutoreleasePoolHandler got kCFRunLoopExit, but there are no autorelease pools in the stack.
    2006-05-03 15:19:03.438 HP Device Manager[488] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Applications/Hewlett-Packard/HP Device Manager.app/Contents/Resources/Action.tif
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.444 HP Device Manager[488] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Applications/Hewlett-Packard/HP Device Manager.app/Contents/Resources/Action.tif
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.561 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    Registering transport IIOP1.0 Info
    Registering transport USBIOP1.0 Info
    2006-05-03 15:19:03.614 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.616 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.636 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.645 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.675 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    (UNKNOWN)
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:03.841 HP Scan and Archive[493] CFLog (0): CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    2006-05-03 15:19:05.157 HP Scan and Archive[493] WARNING: _wrapRunLoopWithAutoreleasePoolHandler got kCFRunLoopExit, but there are no autorelease pools in the stack.
    ===== Wednesday, May 3, 2006 15:19:18 America/Chicago =====
    Expected integer; found `ÒÚÛÙ' instead.
    2006-05-03 15:19:44.437 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Library/InputManagers/Smart Crash Reports/Info
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:44.970 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Library/InputManagers/Smart Crash Reports/Info
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    2006-05-03 15:19:45.448 HP Scan and Archive[493] CFLog (0):
    CFPropertyListCreateFromXMLData(): plist parse failed; the data is not proper UTF-8. The file name for this data could be:
    /Library/InputManagers/Smart Crash Reports/Info
    The parser will retry as in 10.2, but the problem should be corrected in the plist.
    Scanning to PDF:
    <none>
    Quitting the application when complete:
    Unregistering transport USBIOP1.0 Info
    Unregistering transport IIOP1.0 Info
    table = 0

    Unsurprisingly, Apple confirmed that this was a HP error and that they would contact HP.
    I tried to pass-on the info to HP, but I received the response, "Console.log is not an HP application. You will have to contact the vendor of Console.log and inform them of the error."

  • Errors in console log

    Should I worry about these errors found in the console log?
    Nov  3 20:30:44 fseventsd[33]: could not open <</Volumes/NO NAME/.fseventsd/fseventsd-uuid>> (No such file or directory)
    Nov  3 20:30:44 fseventsd[33]: log dir: /Volumes/NO NAME/.fseventsd getting new uuid: 86E15B9F-860C-41F7-8C56-58595ED8AA13
    Nov  3 20:32:34  [0x0-0x48048].com.apple.iTunes[1445]: AppleGVA:: Error creating the accelerator 1
    Nov  3 20:42:37  [0x0-0x46046].com.apple.MassStorageCamera[1442]: 2011-11-03 20:42 MassStorageCamera[1442] (CarbonCore.framework) FSEventStreamInvalidate: ERROR: mach_port_mod_refs(streamRef->d2f_port = 0x4803, MACH_PORT_RIGHT_RECEIVE, -1) => (os/kern) invalid name (15)
    Nov  3 20:42:37 UnmountAssistant[1472]: Volume unmounted successfully
    Nov  3 20:47:43 mDNSResponder[28]: PenaltyTimeForServer: PenaltyTime negative -120979, (server penaltyTime -1491680243, timenow -1491559264) resetting the penalty
    The "volumes" was a camera card I had inserted and I was able to view the information on it fine...

    The only problem I've been having is the battery not charging, but haven't determined if it's the adapter or battery or computer...or all the above (lol, if possible). The computer also used to go to "sleep" a few times randomly while in use...but it hasn't done it again yet...so far...? But I have no idea if any of these errors have to do with that.

  • Errors in Console Log file

    We are seeing hundreds of these errors in our console log file:
    mediaserver automount[4510]: Can't mount servername.domain.ooo.oo:/username on /private/Network/Servers/servername.domain.ooo.oo/username: Invalid argument (22)
    Historically, users have had their home areas mount normally in the dock (as specified in our MCX settings for the group they are in), but of late we have been seeing only some of them getting mounted; and more than this the server is suffering random kernel panics throughout the week.
    Any idea?
    Paul

    Hi Paul
    That would be the one. Stuff also gets logged in /var/log/system.log.
    After a kernel panic you could go into single user command line and just see what got logged perhaps?
    tail -30 /var/log/system.log
    Shows the last 30 entries. I think this is better than doing the whole log because it would take ages to scroll through it all. You could expand this to the last 50-60 entries. You never know it might log something? For example you may see a shutdown cause error followed by a number -93 or -122. You could review the energy saver settings just to make sure nothing is enabled that should be. Possibly the UPS may want looking at?
    Hope this helps, Tony

  • Screen Sharing suddenly fails with "Communication Error" in console log. File sharing works fine. Thoughts?

    I have been using Lion provided Screen Sharing for months without incident.  Suddenly (I do not believe there was an intervening o/s update), it will not connect.  I get a "Connection Error" dialog after a minute or two.  The console log shows the same thing w/o any useful info.  I can share files with the target mac fine and run time machine without error.  Any ideas on what's up?
    Thanks

    Check the host property configured in KM URL generator service.
    Navigate to
    System Administration -> System Configuration -> Knowledge Management -> Content Management -> Global Services -> (switch to advanced mode) ->URL generator Service -> Host
    You should use the fully qualified host name and port.
    Regards,
    Prasanna Krishnamurthy

  • Repeating Error in Console Log

    Hello All,
    I Have a 733 G4 with 1 gig of ram, 60 gb harddrive, running Os 10.3.9 that for some reason is running very slow.
    I checked the Console Log and found the following two errors repeated somewhere between 50 and 100 times with different time stamps:
    Jan 30 15:57:50 Cindy-McNeills-Computer /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: ATSServer got a fatal exception!! Please check /var/tmp/ATSServer_184.
    Jan 30 15:58:01 Cindy-McNeills-Computer /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: FOExceptionMainHandler caught a fatal exception at 0x00089b90
    Does this mean anything to anybody?
    Thanks in advance,
    David

    David --
    You might want to do some font investigation on that computer.
    See this thread in OSXHints
    http://forums.macosxhints.com/archive/index.php/t-36580.html
    You can run FontFinagler (from here)
    http://homepage.mac.com/mdouma46/fontfinagler/
    Hope this helps.

  • Bonjour printing error in console.log and cups error_log

    Hi everyone,
    I have a client who has been successfully printing to an HP LaserJet 4000 over his home LAN for some time now. However, this evening he was no longer able to print, with the print queue stopping immediately when he would try.
    iMac (Intel) Core Duo, Mac OS X 10.4.8, connected through a D-Link DI-524 wired/wireless router. There is a D-Link DP300U print server connected to one of the LAN ports on the router, to facilitate printing to a printer that has not been connected to the LAN recently.
    After using Printer Setup Utility to reset everything, repair permissions, etc., the system still would not print. No updates have been installed since the last week of January 2007, and printing has been fine since then.
    The only clue I was originally able to come across was found in console.log:
    ~ ~ ~ ~ ~
    No log handling enabled - turning on stderr logging
    snmpInk: Unknown host (SMB-Maui\0321.local.)
    ~ ~ ~ ~ ~
    Then, I looked under /var/log, under the cups disclosure triangle, at error_log:
    E [14/Feb/2007:20:50:44 -0800] [Job 2] Unable to locate printer 'SMB-Maui\0321.local.' - Unknown host
    E [14/Feb/2007:20:50:44 -0800] PID 282 stopped with status 1!
    ~ ~ ~ ~ ~
    There is only the one Mac on the LAN, which is not named "SMB-Maui"-anything. I was able to get printing to function via AppleTalk once it was enabled, but the client has been printing successfully via Bonjour for some time and so there seemed no reason why this should simply "happen". No new software has been installed, as he's really quite good about leaving the system alone to do its thing.
    Disk Utility repaired multiple print-related permissions errors before I began using Printer Setup Repair.
    I'm looking for troubleshooting steps to take beyond this point. While the client is satisfied that he can now print via AppleTalk, I am not and would very much like to resolve the lower-level problem. Please advise?
    Thanks much for your time,
    MBJ

    Hi Phil,
    Thanks much! I think you might be on the right track, as I got some unexpected results from Bonjour Browser.
    First of all, there's no Internet Printing Protocol (IPP) entry at all—in fact, several others I have present on my own, local system are not to be found on the remote iMac. What the iMac does show is the following:
    local - 3
    Apple Remote Desktop (net-assistant.udp.) - 1
    iMac
    (IP address):3283
    [(IPv6 MAC address)]:3283
    Remote Frame Buffer (rfb.tcp.) - 1
    iMac
    (IP address):5900
    [(IPv6 MAC address)]:5900
    Workgroup Manager (workstation.tcp.) - 1
    iMac [MAC address]
    [(IPv6 MAC address)]:9
    (IP address):9
    I have reapplied the 10.4.8 Combo Update, with no effect to the problem itself, nor to what is showing in Bonjour Browser.
    One other possible clue: A visitor on the home LAN did attempt to print from Virtual PC 7 on a portable they had brought with them. They were unable to do so from Windows XP, but could print properly from Mac OS X. There is no known, causal relation to the problem at hand here - I mention it to be thorough, no more or less.
    I'll standby for your further thoughts!
    Thanks much for the assist,
    MBJ
    Hi Mike,
    Bonjour is a service discovery system. It doesn't
    print. For
    that you use ipp or lpr, etc. The reason why
    Appletalk works
    is that it has its own discovery system. It's older
    and
    apparently more reliable. Bonjour uses muticast ip
    but
    unless muticast requests are forwarded can't get
    outside
    a local subnet.
    Once on your net was a machine - probably a samba
    server -
    named "maul". Must have been, it's in a mib
    somewhere. Oh
    wait - maybe it's cached in the dlink from its old
    days on
    the dark side!
    Judging from the direction of the slash it was a
    Windows
    machine (I don't think that's an octal 321). CUPS
    thinks
    that's where the printer is. Normally cups discovers
    the
    printers via bonjour, and bonjour must be coming
    back
    with the wrong info!
    But bonjour isn't that smart, something must be
    tricking it.
    There's a wonderful free utility called "Bonjour
    Browser"
    which will show you which services are being
    announced.
    Give it a try:
    http://www.versiontracker.com/dyn/moreinfo/macosx/2162
    2
    Let me know what it shows under ipp.
    -Phil
    Powerbook G4, iMac
    (Intel), and tons of hardware sitting in the closet
      Mac OS X (10.4.8)  
    Power Mac G4 (QuickSilver 2002), 20" Cinema Display (ADC)   Mac OS X (10.4.8)   Dual 1.0 GHz G4/1.5 GB RAM/2x160 GB HD/SuperDrive/GeForce4 Ti/PCI USB 2.0&FW400

  • MDNSResponder error in console log.

    Hi,
    In looking at the console log using appSwitcher I saw the following error many times in a row.
    What does it mean?  Is this something to be wary of regarding battery life?
    mDNSResponder[47]
    mDNSPlatformSendUDP: Invalid interface
    index 00000006
    Thanks and I look forward to your reply.
    ...Bruce

    I'm going to add a me to this morning, and it took a significant toll on my battery life. The battery dropped 39% over a few hours before I noticed the out of control process. I have reset my phone (top and home until I saw the Apple logo) and that seems to have stopped the process.

  • 2 identical systemkeychains and keychain error in console.log

    I hope someone can help me out here. Posted this already under a solved item, by mistake.
    I do see 2 identical systemkeychains in Keychain . But in/library/keychains there's only one file. The systemkeychains content is 1: the password for my wireless modem, 2: a Dashboard Certificate.
    The same situation in the 2 other (user) accounts on my Mac.
    Also I noticed for some time now (every time I log in) this message in the systemlog:(:SecKeychainFindGenericPasswordError= -25308 (secErrStr= User interaction is not allowed.) (Current is : name of my wireless modem. Lately this message shows up now also in the console log.
    Thanks in advance...

    while using Spotlight searching; keychains Ifound something else: Spotlight marks under the folder /Users/my admin.usersname/library 2 items, but at opening the folder it shows only 1 item: login.keychain.
    Under Keychains/library it shows 1 item and if opening the folder I find one system.keychain file ??

  • AFP dies 2-3 times daily, "I/O error" in console logs

    Repair Disk checked out fine... Is it my network?

    Hello Nathan,
    Can you post the full log entry? If the error is something like "disk0 I/O error" then I would start looking at the HD disk0. It is possible for a failing disk to pass a DiskUtility repair disk or fsck since the utilities only verify/repair the file system and do not ensure the HD can read every sector on the disk. You may want to verify that you have complete, current and working backups of all the volumes hosted on any disks that are may be failing.
    Hope this helps!
    - Barrett

  • Error in console log I can't find googling, iPad crashing - help!

    My iPad has been unstable for a few weeks, I had been explaining it by thinking I'd let my Exchange inbox/calendar get out of hand, but when I started looking at the consold log in iPCU when troubleshooting, I saw a lot of these errors:
    Tue Mar 1 07:18:19 iPad kernel[0] <Debug>: AppleAD7147A::readProxData delta is lower than negative tolerance (-67)
    Tue Mar 1 07:18:19 iPad kernel[0] <Debug>: AppleAD7147A::readProxData _sensorDataFailures exceeded allowed limit (50)
    Literally dozens of them in a row, hadn't ever seen them before and I can't find them anywhere online, which worries me. Can anyone shed any light on this?
    Thanks,
    Guy

    Does your computer meet the specs?

  • Error on console log - Frameworks?

    Does anyone know what this message means- it is in the log on console - over and over again. My dual 2.7 G5 is going crazy tonight.
    Sep 20 23:40:58 WS /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Support/mdimportserver: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
    Dick

    Nothing. The Mac was just on.
    I think that I solved the problem this morning - I tossed the old system file from my hard drive. I had done an archive and install of OS 10.4. I think that something from the old system was trying to work.
    When I get a break (LOL) I will erase the startuphard drive and do a clean Tiger install - and then get all my programs back onto the Mac.
    Dick

  • WirelessScanSplit error in console log

    I jsut happened to be look in my error log and I see the following error repeating every 5 seconds. My wireless is turned off as well as BlueTooth:
    date and time DashboardClient[6012] Error: WirelessScanSplit: -20132661825
    date and time com.apple.Dock.agent[681] date and timestamp DashboardClient[6012:a03] Error WirelessScanSplit: -20132661825
    Anyone have a clue what could be causing this????

    Didn't have a chance to try this until late this afternoon, but we're looking good right now! I'll come back and give you points tomorrow if we're solved! Thanks.

  • Help with critical error in console log?

    this is the message i got today:
    Mac OS X Versjon 10.4.9 (bygg 8P2137)
    2007-06-04 20:50:54 +0200
    2007-06-04 20:51:02.049 SystemUIServer[244] lang is:nb
    Jun 4 20:51:02 thomas-dahlens-maskin diskarbitrationd[63]: SystemUIServer [244]:20227 not responding.
    ** (process:289): CRITICAL **: purpleaccount_getstate: assertion `account != NULL' failed
    Have i deleted a wrong file or something?
    thanks for any help in advance

    still got this tough:
    Mac OS X Versjon 10.4.9 (bygg 8P2137)
    2007-06-05 04:53:02 +0200
    terminate called after throwing an instance of 'vcfoundation::base::VCException'
    2007-06-05 04:53:21.942 SystemUIServer[148] lang is:nb
    ** (process:155): CRITICAL **: purpleaccount_getstate: assertion `account != NULL' failed

Maybe you are looking for

  • Is it possible to use an R9 270x GPU in a Mac Pro 1,1?

    I'm trying to install a XFX R9 270x in a Mac Pro 1,1 (2006 Model #A1186).... The machine doesn't currently have any OS installed, but I'm trying to boot and install off of a live USB of Snow Leopard (10.6)... After some research, it seems like this c

  • I can only import bookmarks one at a time?

    When I navigate to my favorites folder it only lets me select one at a time? I have hundreds to import. How can I do the whole folder??? Control/select & shift/select won't work to select the list. My old computer was backed up online including favor

  • Report to find Locked objects in sap system

    Hi All, does anyone know the report to find out the locked objects in an sap system?           or name of the table that stores locked objects ? or any other way through which we can find the number of locked objects ? Thanks and regards Abdul Hadi

  • Edited pdf does not display properly

    I scanned in doc to a .pdf. It displayed properly on iPad (iBooks). I added some text using preview. It did not display when reading it to iBooks. Thinking it was a layering issue, I "Flattened" the file with Adobe Acrobat Pro, and freaked it to iBoo

  • T4i Video time limitations and wedding videography: any solution?

    After 20 years out of the business I am considering restarting a wedding and event videography business. Based on the recommendation of a professional film and television editor, I would like to purchase T4i's (x3) and use them as my shooting platfor