No import previews for Panasonic LX1?

I'm importing RAW photos (via USB cable) from a Panasonic LX1 and don't get previews. Any suggestions/solutions?
Thanks in advance for your help -- Brad

I have the same experience with importing from LX1 RAW files. No preview is avabilable. The import works tho. I'm importing from the SD card in a card reader using USB.
Also, the 'Ignore Suspected Duplicates' check box appears to have no effect.
I've got my LX1 generating a RAW and JPG file for each shot.
The LR preview seems only to be showing me the RAWs [or perhaps the JPGs], it's difficult to tell because file extensions are not displayed in the preview pane. It would be useful to see an image count [broken out by file type] in the preview pane as well.
cheers
-j13ag-

Similar Messages

  • "Preview for Files Not Available" & "Failed to Find a Place for the Imported File"??

    When I export RAW images into LR, some say "Preview for Files Not Available".  Also, it says "Failed to Find a Place for the Imported File".  Why?  What can I do to resolve this

    Hi,
    Tried with this but still the same issue..
    Stop the application services, recompile the JSP files manually, and start the application services. Check the login page then.
    Note: 435550.1 - R12 Login issue on target after cloning , fresh install or upgrade
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=435550.1
    Any other area to look into?
    Thanks for your time!
    Regards,

  • No camera profiles in development module for Panasonic GH4 rw2 files, imported in Lightroom 5.6.

    No camera profiles in development module for Panasonic GH4 rw2 files, imported in Lightroom 5.6.
    Only the "Adobe Standard" is shown. In metadata I can see that the camera and lense were recognized correctly. What could be the reason?

    The sample GH4 raw file I found on PhotographyBlog does have a lens profile that the Adobe applies automatically without having lens profiles being enabled.  This is indicated in Photoshop CC / ACR 8.x so perhaps LR 6 will give us the same indication:
    By comparison, here is what the uncorrected raw file looks like in a raw converter that doesn't do lens corrections:

  • When trying to import images from an external hard drive into Lightroom 5 it states no preview for the files selected

    Go easy on me here….
    Trying to import images from external hard drive into Lightroom 5 but the selected images state 'no preview for file'.
    All other images on the external hard drive can be previewed and imported without issue.
    I have tried adding the images onto the computers hard drive as well but still no joy.
    I've used Lightroom 5 previously and had no issue so convinced its the files I'm trying to import (jpeg files).
    Any help greatly appreciated.

    Go easy on me here….
    Trying to import images from external hard drive into Lightroom 5 but the selected images state 'no preview for file'.
    All other images on the external hard drive can be previewed and imported without issue.
    I have tried adding the images onto the computers hard drive as well but still no joy.
    I've used Lightroom 5 previously and had no issue so convinced its the files I'm trying to import (jpeg files).
    Any help greatly appreciated.

  • My 3.4.5 has ~ 35000 jpg masters.  I have set aperture not to create previews on import and have ensured "maintain previews" is not ticked.  Every time I start aperture it insists on creating previews for ~ 4300 images. Why?

    Having had the previews created I selected all photos and "delete previews".  It did this quickly and no more previews being created.  Once aperture is closed and then re-opened aperture immediately sets about creating the previews for the same photos.  I don't understand why this should be happening.
    This is occuring on my Mackbook Air (Aug 2012) which has 256 GB storage. I am fast running out of space as I am using "Managed Masters".  I intend to make the masters referenced by relocating them to an external HDD but before doing this would like to clear up this problem first. I keep my Vault on the external HDD and have Time Machine and Time Capsule.  When I have relocated the masters to the external HDD I intend that TM backs the external HDD to the TC.  I tink that I will use the second partition on the external HDD for Carbon Copy Cloner to back up the Mackbook Air.
    Any help or advice warmly welcomed.

    Frank
    Many thanks for your input.
    Following your advice I have selected all the projects individually and checked the status of Mantain Previews.  Some were indeed marked up for Mantail Preview so I have unmarked them.
    I have also selected Photos and deleted  previews and also repeated this for My Projects.
    Checking the Get Info for the Preview folder in Aperture Library in Finder this now tells me that I have zero bytes for 564 items.
    Close and then reopen Aperture and it regenerates these564 previews in the blink of an eye.  I haven't been able to locate these photos yet.  I know there are about 120 in facebook and 10 in photostream but dont know where the rest are.
    It seems the issue is not with Aperture but with myself and not understanding Aperture sufficiently well
    Do you see the problem this way?

  • Viewer image doesn't match selected image for Panasonic GF1 imports

    I just discovered that when I view an image in a project, the large displayed image reverts to the last displayed image in the LIBRARY>Photos.
    This only happens to projects which I have imported from my Panasonic GF1 (after making the modifications to the Raw.plist and the RawCamera files.

    I figured it out. After removing the trial app and re-installing the paid app, my modified RAW system files were replaced as well. That's why I could only see the thumbnails.
    Message was edited by: Kenneth Epstein

  • Support for Panasonic GF1 RAW files

    Does anyone have any suggestion on how to get Aperture to work with the GF1 Raw files - is it possible to convert them to dng format then import them?
    Or does Apple update Aperture regularly with support for new(ish) cameras.
    Thanks for your help.

    I have been using the Bibble 5 pro trial. It is worth looking at for Panasonic G1, GH1 users. Great feature set (lens distortion correction- though not necessary for the GH1, vignette correction, layering, chromatic aberration correction, etc...) and works with referenced files. Navigation within Aperture still slicker in my opinion and not sure if Bibble does the cloning thing....
    However, Bibble is light years faster than Aperture with adjustments. Browsing on Bibble is SLOWER than Aperture. (no scroll wheel flipping through preview images as far as I can tell...)

  • Aperture reprocesses previews for all videos every time I open it

    Hello,
    I use Aperture to organise all my videos shot on Canon 7d and an old HD Cam (705 vids, 381GB). Whereas my stills are stored in the aperture library, the videos are imported into eparate folders named after each project inside one master video folder.
    I do this because it is an easy way to work with all of them in FCP (X), importing them without moving them, keywords from the folders coming across (and also because  FCP used to incorrectly display the meta data- date and time imported shown as the file's creation details, when accessed via the aperture library menu from FCP, this bug has probably since been corrected)..
    After restoring from a time machine back up recently, Aperture now reprocesses previews for all 705 movies every single time I open it, reboot or not. It doesn't hang on any particular file or crash but (as it's a mid 2010 MBP) simply slows Aperture down below useable for a few mins until they are done.
    Post import processing set to camera previews, new projects always create previews ticked.
    What am I doing wrong please? Should I attempt to fix the database?
    Best
    Ben

    As a work-around -  hold down the shift-key, when launching Aperture. That will defer the generation of Previews, so you can start working immediately.
    What is your Aperture version and MacOS X version?
    After restoring from a time machine back up recently, Aperture now reprocesses previews for all 705 movies every single time I open it, reboot or not.
    Was Aperture the only thing you restored from a Time Machine backup? Or did you restore more of your system? If you reinstalled or upgraded the system, there may be now video codecs missing. In that case check, if reinstalling additional video codec (Perian, Flip-4-Mac, or similar) may help.
    If the reinstalled aperrture library has been created on a different mac, there may be permission problems after restoring from Time Machine. Check the permissions and ownership on your video folders.
    Are you touching the videos in any way, when using them in Final cut? Using stabilize or something? If the " last modiied " date is changed by Final Cut, this might prompt Aperture to recreate the preview.
    -- Léonie

  • So are we to assume that the preview for developers is the WP 8.1 update intended for Lumia Icon users?  Why is it taking so long for this update to be released?!

    Of those of you that have tried out the preview for developers on the Lumia Icon, what issues have you seen from it?  Does it in fact void your warranty?

    yleetsbob wrote:
    I have largely given up on this device, I think that I made mistake trying out a Windows phone.  I really miss my Android device and feel like I have made a 2 year mistake.
    I don't think you should give up on Windows Phone.  I think you should instead give up on Verizon.  Lets say you had an android device, Verizon could do the same thing and hold up an important update that you're waiting for.  AT&T is much quicker to release Windows Phone updates so you may want to try them next time.For example, you can see on this page Availability in North America - Nokia that AT&T has released the update for their top two phones the 1020 and 1520.  The Verizon icon is almost the same as the Lumia 930 which is the international version.  The 930 has been on Windows Phone 8.1 for many months.  Windows Phone 8.1 has lots of new features including the notification center and Cortana.  It's a shame that Verizon is too lazy, too slow or just doesn't care.  I'm probably going to start installing the developer preview soon and you could do the same.  Basically, you sign up for a free developer account.  Then install the developer preview app to get the updates. Google has no such option for android uses so if Verizon were holding back an android update you'd be worse off.  At least Microsoft gives us a stupid carrier work around...  It's annoying but then you can enjoy your Windows Phone with out having to wait for Verizon whom doesn't care.  They haven't even said a word about it which = worst carrier ever in my opinion.

  • Import Previews are very poor/pixelated ... D90 RAW

    When I am importing my NEF files from my D90 with a card reader, my import previews are of a very poor image quality. Once the images are imported, previews look great.
    Is there any way to improve the quality of import previews from the SD card?

    Well Kevin, did you take look to the Aperture tutorials like this http://www.apple.com/de/aperture/tutorials/#organizeimport-importbasics ?
    I am using a Nikon D100 and since few Weeks a D300 too and I do not have such trouble with the previews as you describe. Well, I do ever take a look to each image at full screen size and zoom it in to 100 % of size before I delete a photo. Thats can not be done in the simple preview window at import.
    Yes, Adobe Lightroom has partly some advantages over Aperture, but what I ever saw and tried out with Lightroom - for me - only the printing capabilities are the one, of which Aperture has to pass.
    I do have now over 15 thousend of photos in my Aperture library and do not want to switch over to Lightroom because of better printing features. If you like to switch over, do it - there is no reason to stay on with Aperture. Except you are using many of Apple Apps.
    I use iMovie 09 and Final Cut Express for creating slide shows of my photos, more seldom I use iPhoto for this. I do a lot of lay out work with Pages, use iWeb for some of my sites and so on. Within all of them I use without any pain the photobrowser with photos from my Aperture library. That can not be done with Lightroom, for example.
    Message was edited by: Adrian Wackernah
    Message was edited by: Adrian Wackernah

  • Import Previews Low Resolution?

    As an Event Photographer I need to be able to quickly preview images from my Cards, Import only the "GOOD" images and transmit these for immediate distribution.
    Problem is the PREVIEW of the images PRIOR to import are very low resolution and don't allow me to make an informed decision as to the quality of the image. Can this be adjusted?
    Also, any tips on speeding up importation would be appreciated.
    I've disabled FACES and PLACES and use a high speed FW800 card reader.

    I can't see how you could make a select in the camera but you can't make it with the camera-generated preview? Especially when the in-camera JPEG is what's displayed on the back of the LCD when you review images (All RAW files contain JPEG previews for this purpose, and the histogram is typically displayed using the info from this embedded JPEG preview).
    The fastest thing you can do for selections is to click Aperture's checkbox to use the embedded JPEG if possible. Then turn on quick preview mode and get to work editing. Note, Aperture 3 lets you edit while you're importing. It doesn't matter if the images are still on the card or have been copied to their final location. If the JPEG on the camera is good enough for quick reviewing, it should be good enough on screen... even if it is at a small resolution.

  • Are the "Previews" for each movie a indicator for quality?

    I just got my Apple TV today and although I haven't bought any movies from it, I was wondering if when you're viewing a preview/trailer for a movie if that trailer is a good indication of the quality of the film?
    I was watching a trailer for "Next Three Days" and it look pretty bad and began to wonder about my purchase.

    Ibis Ghost wrote:
    My television is a Pioneer Elite Pro Kuro that has been ISF calibrated.
    Should not be an issue with the plasma, however do not expect AppleTV to give the best video experience - it cannot match Blu Ray for sheer quality and audio options simply due to the fact that you're using considerably less data for an AppleTV rental (1-1.5GB for SD, 3-4 GB for HD) vs a Blu Ray (up to 25GB of data to play with).
    I am quite sensitive on my Panasonic plasmas to the issue of poor gradation in dark/bright scenes with AppleTV where you get discrete dark grey/white bands instead of smooth dark grey>black or near white>full white. While some of this could be my TVs, I found the SD preview for the latest Karate Kid film particularly revealing of the dark banding trait, and I opted to rent the Blu Ray instead which looked fine by comparison in darker scenes.
    It may be the AppleTV, but I think it's more likely just lack of detail encoding inherent in the compression methods used. I also notice similar problems when viewing digital terrestrial TV on heavily compressed channels.
    AC

  • No preview for autocad dwg files (bridge CS4)

    hello!
    my computer is:
    windows 7 / x64 / nividia 9600GT
    with my new computer we switched from CS3 to adobe CS4 products. (illustrator / PS)
    unfortunately i can't see previews of autocad dwg files anymore. (very important for my work).
    the .dwg files show up only as an autocad icon.
    we installed autocad 2010. but i think this is not the case, because bridge does not make previews for autocad 2009 files either.
    windows 7 makes correct previews.
    funny - bridge opens illustrator CS4 as default for .dwg files.
    in the preferences "file type association" autocad as a software is missing. i have to browse to the autocad.exe program.
    the default association was illustrator...
    is this the case for not making a preview? the "old" computer  was a - win xp / 32bit - the preview in CS3 was there.
    i did not have to browse for the "file type association". autocad was a choosable entity.
    any comment on that would be fine...
    thanks in advance.

    thanks for this quick reply...
    we have "Lightroom" not installed. because we don't own this product...
    our installation is only "Illustrator CS4" and "PS CS4". and "Bridge CS4" of course.
    in the attachement you see the "File Type Association" process.
    Bridge knows only "Illustrator" and "PS". I had to browse to the autocad.exe file (AutoCAD Application R18.0).
    the other attachement shows the Autocad "icon" and the Illustrator preview / .jpg preview in Bridge.
    again:
    "Windows 7" knows Autocad files. it does a preview of the .dwg /.dxf files correct.

  • Blurry iPhone 4 Previews for managed photos

    There have been some previous posts on related blurry preview topics, but I have some very specific observations which may help, and I'm wondering if anyone
    a) has seen this before
    b) believes this should be filed as a bug report to Apple.
    c) has better suggestions.
    I'm using Aperture 3.1.2 currently (though most of the below was observed with 3.1.1) on an iMac i3, running 10.6.6.
    I have three cameras from which I import photos into Aperture: iPhone 4, iPhone 3GS, and Canon 5D.
    - iPhone 3GS and Canon 5D: no matter whether I import directly into Aperture library (managed) or leave the photo somewhere else (referenced), the previews are sharp (when the original is sharp).
    - iPhone 4: when the JPEGs are managed, then they appear blurry. When they are imported as referenced, then they are fine and sharp. This is really obvious if I import the same photo directly into the library first, then copy the JPG somewhere else (say with a different filename), and import that photo again into the same project.... the blurry preview and sharp preview show up side by side.
    My import workflow for iPhone's, by the way, is to first use Image Capture to download them to a folder on the local HD, then import from directory using Aperture. The reason why I do this is because, unlike Aperture, Image Capture allows you to delete the original photos after import. For my 5D, I import directly from CF card using Aperture itself.
    I have tried the various suggestions posted on the forums for the blurry previews:
    o Regenerate Previews - this does nothing
    o Rebuild library - this doesn't change anything, and has the added disadvantage of adding a whole bunch of previously deleted folders (or that was in the Trash) into my library.
    o Delete Previews, restart Aperture - again nothing.
    I also tried to Relocate Masters for those iPhone 4 JPEGs that were imported directly into Aperture library (managed). This doesn't update the preview either.
    The only thing that seems to work is to relocate the masters, delete the versions, then to reimport the relocated masters back into Aperture as referenced. However, this deletes all of one's tags, edits, etc....
    Blurry previews are extremely frustrating, as it makes it really difficult to quickly triage through lots of photos. Later on, my wife may look at that photo in Browser mode and say, why did you tag that with four stars? Only by displaying in single photo or three-up view can one realize that it was a good sharp photo.
    I'm quite annoyed that Apple's own products won't integrate... I like Aperture overall too much to go back to Lightroom, but at the end of the day productivity is what matters.
    Thanks very much.

    So, I had to reboot my iMac since Aperture was hanging when opening the library. After the reboot, no matter if I try importing by drag and drop to the folder, or by checking and clicking on "Import Checked", the previews are now sharp from the iPhone 4 images.
    - In most projects, though, the previews that were not sharp before did not automatically become sharp.
    - What is weird is that in one particular project, the iPhone 4 previews did seem to become sharp, but my 5D shots in that project the previews became blurry.
    It's getting weirder and weirder, folks!

  • Completing import/previews with unreadable files

    I was just importing last night's job of 2500 images shot during a theater production into lightroom 2.6 - 64 bit on my 8 core Mac pro tower running 16 Gigs of RAM. As I often do after such a production - I return to the studio - move all the files from the cards into a single folder on my desktop then import them all into lightroom creating copies of the RAW files and the catalogue itself onto redundant hard drives. I also always create 1:1 previews for quick and easy viewing at any point in time. It's usually late in the evening, and I set Lightroom about this task while I go home to sleep, then begin my edit in the morning with catalogue built and previews made.
    HOWEVER-- after the catalogue was imported but BEFORE lightroom began making previews, lightroom posted a dialogue box on my screen advising me that a file was somehow unreadable -- either corrupt, or the wrong kind of file, COMPLETELY STOPPING THE TASK OF BUILDING THE PREVIEWS.
    So I returned in the morning, no previews were made -- and two hours later I'm not even 1/2 way through building the previews. SO-- ADOBE people -- or any lightroom users out there -- is there any way for Lightroom to continue building previews instead of waiting for me to respond to this dialogue box first. Lightroom assumes apparently that I at my computer to respond to this dialogue box.
    It seems like such a horrible waste of my time when I'm under deadlines to get this work done. I'm happy for the reminder that one of my files was a movie file or a corrupt file or whatever -- please lightroom... sequester these file on my desktop somewhere and finish the job!
    Does anybody know if there is a preference I can click on or off to prevent this from happening. Trying to edit large files that are 10- 21 megapixels and waiting for 1:1 previews to open takes a long time of and by itself -- but waiting and extra 4 hours to have previews built that should have been made while was asleep is something that should NOT be happening. I'm about to make two changes that should speed up my workflow i.e: install a fast ATI Radeon HD 4870 with 512MB of RAM, plus upgrade to snow leopard to take better advantage of the 8 cores of processors that my machine has. But even these upgrades would be for nought when Lightroom STOPS the process in it's tracks.
    HELP-- SOMEONE -- PLEASE!!!
    owen carey

    thanks for the note Bill -
    I also posted my question to the forum for new features in the next lightroom iteration. Seems like once the import stops and before the previews are made -- that's when the dialogue box opens stopping the previews from being made. I'm not an engineer and I don't write code, but it seems to me the software could and should continue with the task at hand ( import AND build previews) for all the image files that it has correctly imported, while it segregates and does not import -- and later confirms the unreadable files.
    Actually I don't think that Lightroom actually imports the disputed files at all -- if they are .mov files I don't think they can -- if they are corrupt files, they advise me of the camera given file name - not the re-named file that my import menu would give it, leading me also to believe that they were not imported into the catalogue or moved into the assigned destination folders. I would love to get some clarification from adobe on this.
    I would imagine that this is a matter of overlooked scriptwriting that has not yet come to their attention... or a script that could be made better if enough people had a problem with it. I was very much hoping to get a response from someone at adobe to my query -- but nothing yet -- hopefully the response will be the elimination of this roadblock in the next version or update. Often it's the squeaky wheel that gets the grease, and maybe there are not as many people out there as myself who have run into this problem, and posted inquiries to the forum. Theater shooters like myself who might shoot 2,500 to 3,500 images in 2-3 hrs, event photographers, sports photogs, wedding photographers and fashion photographers are all the kind of people who can shoot thousands of images in a day or a matter of hours. Unless we are sitting at the computer when the import finishes, we will be waiting for previews to build - be they standard or 1:1 previews - until after we have read and checked the warning dialogue. hopefully this will be fixed soon or we will get some sort of explanation.
    I have a lot of admiration for the folks at adobe, their genius, their talent, their accomplishment and their responsiveness to our issues, so I hope this problem gets addressed soon - I cannot be the only one out there who was STOPPED at this point in the workflow.
    cheers, and best of luck

Maybe you are looking for

  • Do I have to set up the 5Ghz wireless band network or is it automatic?

    I'm hoping someone can give me advice on how I should best proceed..... I have an old (7 years) Belkin 802.11g F1PI241EGau 'gateway' that was provided by my ISP when I switched over to their service in February 2006, which I use to access the Interne

  • Fuzzy line on the middle of display.

    Recently i have found a fuzzy line in the middle of my retina macbook pro screen (15"). I have always treated it very well, it never falled down. The line appear only with a strong light from sun, especially with dark backgounds on the screen. The li

  • Viewing photos on TV

    I've purchased the Universal Dock and the component video cable to hook my iPhone up to my home entertainment system. I can watch video podcasts and TV shows from my iPhone, but I cannot view photo slide shows. What am I doing wrong? All the literatu

  • ACE 4710 Sticky analyzes

    Hello, I have running an ACE4710 with round 10 differnet Services what al  needs stickyness because of the Apllication what is balanced. There are also different Sticky settings setup. Now in the last days I see the Sitcky Table much more growing tha

  • Shut-dump in ABAP WebDynpro

    Hi Guys, I'm new to ABAP Webdynpro. I'm trying to display data in from table VBAP in webdynpro ALV and I get the following runtime error. Neither I'm able to debug the error (external break-point doesn't stop in my action event, may be it's dumping b