No install disks with MacBook Pro
I recently purchased a MacBook Pro (mid 2012 model) and no install disks shipped with it. Anyone else have this problem? Is Apple no longer supplying install disks with its laptops?
Nope, no longer supplying disks since Lion first shipped with late 2011 MBP. What you have instead is Lion (or Mountain Lion) Recovery partition. From here you can do all that you could do with installaton disc(s).
Clinton
Similar Messages
-
Can I use macbook pro install Disk with macbook?
Hi everyone,
I have a macbook and macbook pro, I had to reinstall system after harddrive went on the macbook. I can't find my macbook restore disks/installation disks. Would I be able to use the macbook pro install disks with macbook?
Much appreciate your help.
MoIt might work but it's risky. The MBP installation disks may well not contain the right drivers for the MacBook. It would be better, if at all possible, if you contacted Apple tech support and asked for a new set of disks for your MacBook. They'll send you a set for a reasonable fee. If you can't wait, perhaps there's an Apple Store or other Apple dealer near you that would have a set you could borrow in-store to do the reinstallation.
-
My macbook pro (running leopard) recently "locked up" and would not move past the log-in screen. I walked through many steps offered on the apple support pages, ultimately getting to the point where it was suggested I re-install using the original DVDs
I am trying that right now, but the Discs and progress have now also locked up and are not progressing.
Any ideas appreciateda) Check that your ram was inserted properly. Loose ram costs lives
http://docs.info.apple.com/article.html?artnum=303491
b) Insert your install DVD and restart the computer - hold down the D key as it starts up and run the Apple Hardware Test (I think it's D - it says which key on the disk) and see if
i) The test completes
ii) If there are any errors.
If the error mentions memory or ram, see if the machine will start without the offending chip. -
Problems booting from install disk with MacBook Air
(I'm posting this here b/c it's been three days since I posted this in the /MacBook Air/Networking section and no one's touched it...)
Somehow, the hard disk in my MBA has been corrupted, or something. First symptom I noticed - when booting up, I get stuck on that blank blue screen for, oh, 5 minutes or so, before flashing back to the grey Apple logo screen, then finally getting to the desktop. I tried repairing permissions via Disk Utility; it spun for 10 minutes without doing anything, so I stopped the process. The "Repair Disk" function in Disk Utility was not available for some reason, so I tried "Verify Disk." This failed. I forget the exact wording of the error message, but it said, in essence, that the disk was corrupted and I should run Disk Utility from the system install disk.
Here it gets interesting. I have an MBA SuperDrive, so I first tried booting from there. I'd forgotten about holding down "c" I just held Option, selected the disk, and tried to boot from it. I got a grey screen with the grey Apple logo and a spinning gear; then the Apple logo was replaced by a grey circle with a diagonal line through it (like, from a "no smoking" sign or something) and a spinning gear... this persisted for another 10 minutes or so without going anywhere, so I forced a shutdown.
Thinking the problem might be the SuperDrive, I tried to do the same procedure via Remote Disk (from an iBook G4 running 10.5.5). I followed the instructions, connected the MBA to my wireless network, it found the remote disk, tried to boot from it - but I got the same behavior. Grey Apple screen giving way to grey circle with a diagonal line through it, and an endlessly spinning gear underneath.
What in the world is going on here?
Message was edited by: Jonathan KussmaulYou seem to have a lot of problems, the last being a kernel panic. This is often attributed to a hardware failure including the possibility of defective RAM.
They are not easy to track down but here are some suggestions to assist you.
What is a Kernel panic?
Resolving Kernel Panic's by Dr Smoke
However, try once again to boot from the install DVD and perform Repair Disk, otherwise, start on the troubleshooting. -
No boot disk with macbook pro ?
Just purchase new macbook pro, no boot or application disks were inclosed. How to I restore if HD crashes?
By using Internet Recovery: OS X (Lion/Mountain Lion)- About OS X Recovery. Basic disk repairs and reinstallations can be iniated from the Recovery HD which is an invisible partition on your computer's hard drive
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Install or Reinstall Lion/Mountain Lion from Scratch (Erase and Install)
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
There are no longer any software install discs. -
Help after using verify disk with MacBook Pro 2009
Hello, I was running verify disk and got this massage:
This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 932391)
Missing thread record (id = 1020109)
Missing thread record (id = 2003740)
Missing thread record (id = 2587373)
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume file count
(It should be 806588 instead of 806594)
Checking extended attributes file.
Checking multi-linked directories.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
what dose it mean?
I don´t have my Mac OS X installation disc with me and it is also not possible to buy one here. what can i do?
thank you so muchBoot into single-user mode. After startup is completed you will be in command line mode and should see a prompt with a cursor positioned after it. At the prompt enter the following then press RETURN:
/sbin/fsck -fy
If you receive a message that says "***** FILE SYSTEM WAS MODIFIED *****" then re-run the command until you receive a message that says "** The volume (name_of_volume) appears to be OK." If you re-run the command more than seven times and do not get the OK message, then the drive cannot be repaired this way. If you were successful then enter:
reboot
and press RETURN to restart the computer.
There is no guarantee this will fix the problem. Normally you must boot from another drive in order to repair the startup volume. If you can't use a Snow Leopard DVD then you would need to use some other bootable device like a backup drive or another Mac connected via Firewire - Target Disk Mode. -
How do I share a hard drive with the new iMac to load a disk from macbook pro
How do I share a hard drive with the new iMac to load a disk from macbook pro. I want to install office for Mac from a disk but dont know how to share har drive from macpro
thanksThe new iMac's don' t have DVD drives however almost all have a disk drive. The easiest method of installing MS Office for Mac on your new iMac is to download it from Microsoft and then input the code you received when you purchased your original license. Otherwise you can use the DVD drive on your MBP to install on your iMac, that feature is called Remote Disc. Instructions for Remote Disc can be found at:http://support.apple.com/kb/ht5287
-
I have two questions...
1) If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes? (because I don't have them)
2) Has anyone ever seen anything like this before on their computers?
The Apple Genius' were stumped by my laptop issues and said they'd never seen anything like it before and recommended I did a clean install. Below you can see my trash bin, and if you look at the "Empty" button it reads "N201" and then there's the "N39" to the left of it. You can also see these numbers over by the folder area--"SD5, SD6, SD7." But that's not all...
When I right click on items I see the numbers again. Instead of "Open with" I get "N152" and there's an "N35" and "LB1" towards the bottom.
I have no idea what's going on so I'm just going to do a clean install on my machine but I don't want to lose my apps. I don't have the original install DVDs for them anymore. If you have any suggestions please let me know. Thanks!You don't lose them. You can always redownload them from the app store after you log back in with your Apple ID.
"Buy, download, and even redownload.
You can install apps on every Mac you use and even download them again. This is especially convenient when you buy a new Mac and want to load it with apps you already own." -
I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error. Is this an issue with the bootcamp driver not compatible with Windows 8.1? or is there something I can do to fix this.
I also keep getting WHEA-Logger Event-ID 19 warning events in the Windows Event Logs with the following details.
A corrected hardware error has occurred.
Reported by component: Processor Core
Error Source: Corrected Machine Check
Error Type: Cache Hierarchy Error
Processor APIC ID: 3
The details view of this entry contains further information.likely win8.1 dont have official bootcamp support yet
1/3 of my logins into win8.1 result in a fatal bluescreen
was the same deal when I installed win8 before official support
and when the drivers with official support was released the issue went away -
I have PS 4,5,and 6 installed on my Macbook Pro as well as Lightroom 4 and 5. Can I remove PS 4 and 5 and LR 4? PS 4 is the total install and PS 5 and 6 are upgrades. LR 4 is the full package with LR an upgrade.
I need space!First let me disabuse of a misconception: All Adobe upgrades are FULL installers. Whether you buy them as upgrades or new versions does not make an iota of difference. The upgrade installers do not need to find a prior version installed, they just prompt you for the old serial number as well as the old one, and they do not rely on the old version in the least.
Second, the time to uninstall an older version is BEFORE upgrading to a newer one. Otherwise, the uninstaller from the older versions will mess up with your new install. There are a gazillion files that are named the same and in the same locations as the new one.
Your best bet now is to uninstall ALL the Photoshop versions you have installed, including the newest one, one by one, then run the Adobe CS Cleaner Tool, then run Repair Permissions from Apple's Desk Utility, and finally re-install the latest version.
The other alternative, if your boot HD is large enough (very doubtful in case of a laptop like a Mac Book), is to leave all versions on it.
Your choice. -
I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.
http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html -
Unable to sync with MacBook Pro even after installing Po...
Unable to sync with MacBook Pro even after installing PocketMac
why don't you post the same thing again (since you posted it 3 times already)?
perhaps whole you're at it you could post some useful information to get advice like Mac OS, Device, Device OS, other sync software installed...
4.6.1.305 hybrid
Mac Pro 2X2.8 Quad SL -
Does the MS Office come already installed with Macbook Pro, coz i dont seem to find it in my Mac? Kindly advise. Thanks!
No it doesn't. You need to purchase it from Microsoft.
-
I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes
i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later. -
Apple TV 7.0.2 Airplay with MacBook PRO OS X 10.10.1 is not working.
Apple TV 7.0.2 Airplay with MacBook PRO OS X 10.10.1 is not working, I have validated all settings and rebooted all systems (per Apple recommendation) and still not working what seems to be the issue?
You need to upgrade your OS. It's your responsibility to verify if your equipment meets the system requirements, not the Apple Store.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Maybe you are looking for
-
Oracle 11g bug for column ambigously defined error
I have below format query running on Oracle 10g without any issues select col1 from (select col1 from (select 'A' col1 from dual) ) v1 inner join (select col1 as col2 from (select 'A' col1 from dual) ) v2 on (v1.col1=v2.col2); When I run the exact sa
-
Source System as R/3 production for the BI Development?
Hai.. My client asked me to get the data available in production for testing the loading and the calculations done in BI 7.0. I want to know whether it is possible to get the data from production. In my undersatanding the landscape b/w BI and R/3 is
-
Ipod touch, both my sister and I have 8gbs and are both running Windows 7 home premium. So in iTunes the ipod is called the right thing... but when I am looking at my computers C: D: cd drives and that stuff... The device is listed as hers? E.g. Sist
-
I wanted to know if i were to come into an Apple store, would you be able to replace my home button with the new one that i bring in?
-
My wifi hasn't been working and I ran a quick test and it said error 25 wifi and 1000 modem. Does that mean the wifi modem is broken? Will warranty cover this? Post relates to: HP Veer p160una (AT&T)