No Listeners found for the topic getDeploymentInfo

Since we restarted the EP6 SP14 portal today we have recieved the message:
No Listeners found for the topic getDeploymentInfo
The portal is running on two win 2003 boxes with 3 server processes on each. We get the above message against two of the processes on one of the servers.
Any suggestions gratefully received
Paul

Similar Messages

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

UIXJSP App built off BC4J Project JBO Excep XML File not found for the Container

Running JDEV 9.0.3 build 960
Created a new project in folder "UIX JSP"
"UIX JSP" note the space!
Create a default UIX JSP Application based on existing BC4J Project
When running a JSP - Get a JBO Error complaining that the XML File not found for the Container
If I recreate the project with name UIX_JSP problem does not occur.

I logged a bug on this.

XML File not found for the Container model.cpx

I can run my application from JDeveloper without receiving the error. But when I deploy the application I get the following:
500 Internal Server Error
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container model.cpx at oracle.jbo.mom.DefinitionManager.loadProjectDefinition(DefinitionManager.java:751) at oracle.jbo.uicli.mom.JUMetaObjectManager.createPool(JUMetaObjectManager.java:457) at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:541) at oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(BC4JRequestProcessor.java:233) at oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(BC4JRequestProcessor.java:123) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:234) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:721) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803) at java.lang.Thread.run(Thread.java:479)
Any Ideas?

Hi,
please explicitly "make" the project. One reason for this problem could be that the model.cpx isn't created properly. Select the model project and compile the complete project before deploying it. Sometimes it helps to clear the "class" directory of the project on teh file system before re-compiling
Frank

"XML File not found for the Container DataBindings.cpx" error after deploy

Hello,
I have a problem with my JSP-Javaproject. Local works all fine but when i deploy my project to a Oracle Aplication Server i allway get this XML-File-Not-found exception:
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container DataBindings.cpx
In my EAR-File the DataBindings.cpx is at:
\WEB-INF\classes\
My JSP-File:
<jbo:ApplicationModule id="AippackageModule" definition="DataBindings.DataModule" releasemode="Stateful" />
My web.xml:
<context-param>
<param-name>CpxFileName</param-name>
<param-value>DataBindings</param-value>
</context-param>
My DataBindings.cpx:
<?xml version='1.0' encoding='windows-1252' ?>
<Application xmlns="http://xmlns.oracle.com/adfm/application" id="DataBindings"
Package="" ClientType="Generic">
<pageMap>
</pageMap>
<pageDefinitionUsages>
<page id="eonerrorPageDef"
path="de.avacon.ahb.system.tools.pageDefs.eonerrorPageDef"/>
</pageDefinitionUsages>
<dataControlUsages>
<BC4JDataControl Configuration="AppModuleLocal"
Package="model.data"
xmlns="http://xmlns.oracle.com/adfm/datacontrol"
id="DataModule">
<Parameters/>
</BC4JDataControl>
</dataControlUsages>
</Application>
What can i do?
Thanks, steve

Adding the dependency in the ViewController fixed this for me.
I'm using two AppModules in the controller and the second one wasn't being picked up.
I was able to fix this by:
Go to the Project Properties, select Dependencies, edit the Dependent Projects and Archives, find the model that's failing and add a tick in the Build Output box.
The model should now be picked up in the ViewController's DataBindings.cpx source file, though I did have to restart JDev for this to be picked up.
HTH
Phil

XML File not Found for the Container BC4J.cpx

Hi,
Have following error when I start a BC4J-JSP/Struts application (with Embedded and standalone OC4J) :
500 Internal Server Error
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container BC4J.cpx
 oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition(java.lang.String)
 DefinitionManager.java:751
 oracle.jbo.mom.ContainerDefImpl oracle.jbo.mom.DefinitionManager.loadProjectDefinition()
 DefinitionManager.java:793
 void oracle.jbo.mom.DefinitionManager.initManager()
 DefinitionManager.java:137
 void oracle.jbo.uicli.mom.JUMetaObjectManager.<init>()
 JUMetaObjectManager.java:57
 oracle.jbo.uicli.mom.JUMetaObjectManager oracle.jbo.uicli.mom.JUMetaObjectManager.getJUMom()
 JUMetaObjectManager.java:131
 oracle.jbo.common.ampool.SessionCookie oracle.jbo.http.HttpContainer.findSessionCookie(javax.servlet.http.HttpSession, java.lang.String, java.lang.String, java.util.Properties)
 HttpContainer.java:541
 boolean oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(oracle.jbo.html.struts11.BC4JActionMapping, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
 BC4JRequestProcessor.java:222
 org.apache.struts.action.ActionMapping oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
 BC4JRequestProcessor.java:124
 void org.apache.struts.action.RequestProcessor.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
 RequestProcessor.java:234
 void org.apache.struts.action.ActionServlet.process(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
 ActionServlet.java:1292
 void org.apache.struts.action.ActionServlet.doGet(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
 ActionServlet.java:492
 void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
 HttpServlet.java:740
 void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
 HttpServlet.java:853
 void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
 ServletRequestDispatcher.java:721
 void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
 ServletRequestDispatcher.java:306
 boolean com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.ApplicationServerThread, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletRequest, com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
 HttpRequestHandler.java:767
 void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(java.lang.Thread)
 HttpRequestHandler.java:259
 void com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run()
 HttpRequestHandler.java:106
 void EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run()
 PooledExecutor.java:803
 void java.lang.Thread.run()
 Thread.java:484
Then I make a Reload and it's ok.
I have a Workspace with two Projects :
BC4J.jpr for Businnes Components
Web.jpr for JSP Struts
In /classes I have the file Web.cpx, but no BC4J.cpx.
From which does this name come ? Can I change this name ?
Thanks
Yves

I found this on Metalink...
JBO-26001: NoXMLFileException
Cause: Could not open the named XML file for read.
The following is from Note 137429.1. Hope this helps.
Raja.
JBO-26001: NoXMLFileException
Cause: Could not open the named XML file for read.
Action: 1. Make sure that the file is present. In particular, if the file is to be found in a zip/jar file, make sure that the Zip/JAR file is included in the CLASSPATH.
2. This error is also reported if the name of the XML file does not match the object Name specified in the XML file. If the file system support case insensitive file names (e.g., Windows NT), make sure that the file name matches the object Name in the XML file in case-sensitive fashion.
3. For a .JPX file, this error is reported if the JPX file is missing the JboProject XML tag. Check the JPX file to make sure that the valid tag is in there.
4. One XML file may be extending another XML file (specified by the Extends element in this XML file). This error is reported if the base XML file is not found.
5. When loading the XML file for a package (JboPackage tag), this error is reported if some unexpected error occurs while loading a containee.
In all of the above cases, a more descriptive message may be printed on Diagnostic. If you are not seeing Diagnostic messages, you can run your application with Diagnostic turned on, as in "java -Djbo.debugoutput=console ...", to see Diagnostic messages.

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."

Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."

Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/

Standard cost estimate could not be found for the material

Dear All,
We have 4 manufacturing plants and 30 sale depots. We are maintaining price control (S) for FG and SFG in Manufacturing plants,price control (V) at depots for the same material code. we are getting an error message " standard cost estimate could not be found for the material" while doing billing at depot.
Please give me suggestion.
Your suggestion should be appreciate.
Thanks in advance............
AND
My client want to see profitability at manufacturing plant level and need break up for the COGM. So how can i get the values of depot sales.
please let me know how to do........

Hai
Price control should be S for Depot also. You need to run standard cost estimate in DEPOT after entering additive cost under CK74N for frieght, excise duty etc. To transfer the standard cost from the source plant you need to make configuration in OMD9 defining the receiver and sender combination so that system can pick up the cost from source plant. This special produrement type needs to be asigned in the material masters of DEPOT under MRP 2 view.
Pushkala

"No administrator found for the task" in the front end

Hi all,
My issue is, whenever approval request is raised from the front end ( JAVA WEB-DYNPRO), it triggers the workflow through the "sap_wapi_start_workflow" and when the workflow proceeds to the first level of approval, the front end application provides the approver with Approve and Reject options.
On click of approve, from the java webdynpro, the approve status is written in the container using "sap_wapi_write_container" and then a call is made to "sap_wapi_workitem_complete". Upon excution, the message line is "No administrator found for the task" and the return code is "1".
But if we do the same steps from the backend (R/3), the workitem is getting completed without any such error.
Please advice.
Thanks.

Hi Balaji,
I think I have an answer for you. This has happened with us when approving a WD java task using UWL (in our case for travel). The key is the return code of 1.
What has happened is this. The return code actually comes from the function SWW_WI_STATUS_CHANGE_NEW which is called deep in the WAPI wrapper. It means "infeasible_state_transition = 1".
This is due to the fact that after updating the container, your wapi call from web dynpro tries to change the workitem from status of "Ready" to status "Completed". This will not work.
What you will have to do is call "SWW_WI_STATUS_CHANGE_NEW" to set the status to 'SELECTED' beofre setting the item to complete.
The reason for this is that when you are executing from R3, the status change is done for you. When calling from the WD, no reservation of the workitem occurs.
Sorry about last night, I live well outside of town and the phone reception at my place is poor.
Regards
Gareth

No administrator found for the task Message no. 5W141

Dear all,
i am doing asset mass changes i am not able to release my work list (AR31) it"s giving message like
No administrator found for the task Message no. 5W141
plz can any one help me following steps i followed
1.substitution for assets mass changes to substitute Dep Key
condition is asset class = 15000 and Dep area = 01
substitute with Dep key S200
for 15000 asset class actually dep key S475
2.i created work list for asset class 15000 and dep area 01
then attached my substitution
3. in AR31 here all assets status is Ready when i release work list it"s giving message same
i tried in DEV and QTY no solution
this is high priority in my project
plz Dear friends send reply
Regrds
Govind

HI Jayendra
I am having the same problem with releasing the worklist in AR31.
No administrator found for the task
please let me know the solution.
Thanks
Sharath

No Component found for the structure

Hi
I am getting the following error when extracted the delta upload into BI
No Component found for the structure for article 809875.
The extractor is 2LIS_02_SCL.
The following is the msg in the status bar.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I have replicated and activated the datasource. But still i am getting this error. How to fix it.
Thanks
Annie

Hi Annie,
Activate ur datasource in source system and replicate and also activate in BI system.This is a time stamp problem.After activated try to run ur infopackage again.It should be fine now.
Regards
Chandu

No administrator found for the task error message

Dear all,
I got the message "No administrator found for the task" when the MSS user try to approve and overtime. When i double click on the error for details, it actually give
WF notification:work item cannot be executed message no. 5W141. As got overtime, i am using the standard task 20000460 which i already maintain the agent as general task. I am using the Agent (Default Rule) rule number 157 (Superior (chief position)).
I tested it in my development and it works, however it does not work in my production. Do i miss any setting or parameter?
My R/3 backend is 4.7 with Enterprise Portal 6.
Thanks
Regards,
Bryan

You hvae to refresh the organizational assignment and you can do it from SBWP txn ,
1.Execute SBWP.
2.On Menu clcik on Settings -
> Workflow Settings -
> Refresh Organizational Assignment .
and now you try to execute the workitem now you find see the error.

"No Administrator found for the task " ?

Hi All,
I am using a standard method "display" in my ztask . [BO - FIPP, method - dispaly]
workitem created by this task is to be delivered to "initiator".
Now, initiator has this workitem in his inbox, but whenever he tries to execute that , a message is dispalyed saying
"No Administrator found for the task " and task is NOT executed at the end.
Please suggest wat could be missing or wat could be cross checked here to resolve the matter.
Many Thanks
Regards
Priya

You're welcome Priya,
One of the major advantages of forums like these is the search functionality. If you learn how to use that in an effective way you can solve more problems in shorter amounts of time than by posting questions.
Kind regards, Rob Dielemans

No Administrator found for the task (solution in FAQ not applicable sadly)

Hi All,
I have had to build a custom work item inbox due to complex client requirements, one of which being that all tasks are declared as "General tasks", so that all users can select and work them.
Work item execution is performed using the function module SWL_WI_DISPATCH (I've also tested using SAP_WAPI_EXECUTE_WORKITEM), which sometimes returns the error 'No administrator found for the task'.
I followed the standard instructions for this error message, refreshing the org assignments, transaction SWU_OBUF etc, and this did not help the issue.
The error seems to occur within the function module RH_WI_AGENT_EXECUTE_CHECK, however according to our configuration I can see no reason why users shouldn't be allowed to execute the work item, if the org assignment has been stable for several months, all tasks are generic, and the work item status is READY. There is no rule for determining agent beyond them being "General task"s.
Does anyone have any ideas? According to the data in SWWWIHEAD I can't see any reason why execution should be failing for these work items.
Thanks

Hi there,
almoste there
The new extended eMail notification do allow a feature, which is named "Forward by eMail" (in the general settings of SWNCONFIG). And the result is, that a work item can be executed by another user-id, who is not the actual receiver of the work item.
If you looked at report RSWNWIEX you'll find out that exactly the proposed solution is in use there, having a very usuable example already in place: (check lines 155 and following)
 CALL FUNCTION 'SAP_WAPI_EXECUTE_WORKITEM'
 EXPORTING
 workitem_id = p_wi_id
 IF lv_rc <> 0 AND cl_swn_settings=>wi_forward_via_mail = 'X'.
*- require to put back if WI is selected
 CALL FUNCTION 'SAP_WAPI_ADM_WORKITEM_BACK'
 CALL FUNCTION 'SAP_WAPI_FORWARD_WORKITEM'
 EXPORTING
 workitem_id = p_wi_id
 user_id = sy-uname
 COMMIT WORK. "Needs to be done before executing again
 CALL METHOD cl_swf_run_wim_factory=>initialize( ).
 CALL FUNCTION 'SAP_WAPI_EXECUTE_WORKITEM'
That doesn't blast a security hole, as far as I see.
Using the table SWWUSERWI directly is not advisable at that time, I'd say.
Best wishes,
Florin

No Listeners found for the topic getDeploymentInfo

Similar Messages

Maybe you are looking for