No longer mirroring with 10.8

So, why can I no longer airplay mirror under Mac OS 10.8? Why would Apple want to force me to upgrade to Mavericks knowing full well it's filled with problems? I upgraded once and it was the only time I had to use Time Machine to go back to 10.8. But now they want to force me to upgrade so I can continue to use all of the services I used to be eligible for. Bull.

this is a user helping user forum if you wish to complain to apple use feedback
http://www.apple.com/feedback/appletv.html

Similar Messages

HT1600 no longer mirrors with my devices

airplay no longer works... it was working fine today and all of a sudden it stopped working. I've restarted my apple tv and even restored to its original factory setting and nothing. please help

I have replied to a previous post as I had the exact same problem.
AirPlay there this morning and not this afternoon.
Glad to say its back now AFTER reconnecting Apple TV back to Wifi(well re entered the pass code) and AirPlay icon is back as I type!
Hope this works for you

HT4623 No longer can mirror with my ipad since last update.

No longer can mirror with my ipad to apple tv since last update

Check the following before you send it in.
Setup Apple TV with iPad
1. Setup Apple TV
(a) Connect cables and power cord
(b) Turn on TV and select Input
(c) Configure Apple TV e.g. Language, network
2. Setup Home Sharing on iPad
Settings>Music/Video>Home Sharing
3. Setup Home Sharing on Apple TV
Settings>Computer>Turn on Home Sharing. Enter Apple ID and Password
4. Pair Apple TV with Remote Control
General>Remotes>Pair Apple Remote
To AirPlay video or photo content to your Apple TV
1. Connect your iOS device and Apple TV to the same Wi-Fi network.
2. Open the Videos, Safari or Photos app on your device.
3. Locate and tap the AirPlay icon on screen or Control Center.
4. Select your Apple TV from the list of available devices that appears and begin playback.
Note: Item 1 is very important

Help! My display driver is no longer compatible with Adobe software!

Help! I rely on Adobe CC and my iMac to earn my living. My display driver is no longer compatible with Adobe software! What should I do? (most affordably because I dont have enough money for even basic living expenses right now.) Detailed notes are below but in a nutshell, I have a NVIDIA GeForce 8800 GS display driver. Adobe no longer supports it and disables the software functions depending on the graphics hardware. It recommends I check the manufacturer's website for the latest software. I did but only found firmware update for a different type of display driver for my early 2008 iMac. What should I do??! Please help me solve this!
Note from Adobe:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
I have an early 2008 iMac:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.30f1
Serial Number (system): YD*****N4
Hardware UUID: D42002AC-A757-51C0-8D5D-333AD24D3DF9
My display driver:
NVIDIA GeForce 8800 GS:
Chipset Model: NVIDIA GeForce 8800 GS
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0609
Revision ID: 0x00a2
ROM Revision: 3234
Displays:
iMac:
Display Type: LCD
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Note from Adobe:
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
<edited by host>

If you decide to use up to the minute applications, you will have to accept that the computer and operating system will eventually be incompatible with your chosen application as the features in the latest application rely on new hardware and operating systems to support them.
Your options are to either use a newer Mac or use a version of Photoshop that will run on your Mac.

After upgrade to Mavericks, AppleTV no longer mirrors my mid-2012 Macbook Pro's accessibility zooming.

Prior to Mavericks upgrade, I had accessibilty zooming enabled using the control hotkey with two-finger scroll.
The zoom effect would be duplicated in AppleTV and transmitted to an overhead projector in my classroom.
This feature is very useful for directing student's attention to a particular region of the screen.
However after the upgrade, AppleTV no longer mirrors the zooming effect.
I can see the zoom on the laptop, just not on my projector.
I can see zooming on the projector if I use the VGA adapter and plug directly into projector.
Laptop:
mid-2012 Macbook Pro
OS X 10.9
8gb RAM
2.3 GHz Intel Core i7
Have tried variety of displays settings and none work including:
--selecting best for display or AppleTV
--changing the resolution
AppleTV
model: MD199LL/A
software: 6.0 (6646.65)
resolution: 1024x768 60hz (my projector requires this)
Projector:
HP vp6320
I use an HDMI to VGA/Audio adapter to convert to VGA for my projector.
I seem to recall that overscan correction was an option to set under Mountain Lion, but I can't find that when doing a Spotlight search in System Preferences. Not sure if that would help or not but thought I'd mention it.
Any help would be greatly appreciated.

Same problem. Zoomed image will not show on the Apple TV screen even though it does show on your laptop or desktop.
I tried every aspect of System Preferences>Displays and Accessibility. None worked. Problem was presented to an Apple Specialist on his Mavericks computers and his Apple TV. Same thing. He said this appears to be a Mavericks glich and immediately went to transmit the problem to Cupertino.
A poor "work around" is to use System Preferences>Accessibility and under Zoom, select Zoom Style "Picture-inPicture" which will result in a "zoom box." The box can be scaled to a desired size and activated with the Control-Scroll motion. This box will display zoomed on the Apple TV screen. The default Zoom Style selection "Fullscreen" did not and will not show on the Apple TV screen even though it does show on your laptop or desktop
The problem: the zoomed "magnified" image loses resolution and if zoomed far enough, becomes "pixilated."
 Apple needs to fix this or tell us how to go back to the earlier Control-Zoom which I think the "Fullscreen" was intended.

TS3367 FaceTime texting no longer mirroring on devices

Just changed my Apple ID password and it has now stopped mirroring text messages on my iPad and iPhone devices. It is one or the other now. It is not a big deal but I am communicating with someone overseas and it is nice to keep the same conversation going independent of what device I am on. It just seemed to have changed since I changed my password - still working ok but no longer mirroring. Any idea why it has it changed - I liked it the way it was?

Try signing out of your Apple ID on all of your devices, then sign back in and see if that works....

Lightning AV Adapter no longer mirrors screen in iOS 8

i just updated my iphone 5 to iOS 8 and the Lightning AV adapter no longer 'mirrors' the phone screen in my television (black screen), yet still shows video perfectly when played. I am assuming this is a bug with iOS 8 as it worked perfectly before updating from iOS 7.1.2.

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

HT4428 My 128 Gb iPad cannot do airplay mirroring with Apple TV 3. It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button. No airplay button when sliding the bottom opened apps to the right.

My 128 Gb iPad cannot do airplay mirroring with Apple TV 3. It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button. No airplay button when sliding the bottom opened apps to the right! Note : This problem persists after HDMI cable has been changed, and Apple TV was reset. My another iPad 4 64Gb also on the same most updated ISO has no problem.

I restarted the iPad, it is okay now! I think it is because I have been using the smart cover for too long, without shutting down the iPad completely! It just works fine with the airplay signal appearing again after restarting the iPad.

Monitor no longer mirrors at full resolution

I have a 1080p monitor. The mac is not able to output to this at full resolution when the displays are set up to 'mirror' (connected to 2011 macbook pro via DVI- thunderbolt adaptor used).
Previously in Snow Leopard I was able to attach the monitor (via DVI with a thunderbolt / mini display port adaptor), close the lid of my macbook, then insert a USB device, to wake the computer from sleep mode. Upon waking from sleep, the computer would detect the external monitor and display at full 1080p resoltion. The lid of the computer could then be opened to use the laptop keyboard and trackpad.
In Lion, the above process works, however when the lid of the laptop is opened, the detect display process seems to run again and the laptop screen turns back on and the external display will no longer mirror at full resolution.
I already have an apple wireless keyboard and mouse, but am using these with another computer- so cannot use these with the laptop (this configuration would allow me to work with the laptop lid closed, and hence keep full resoltion on the external monitor). It isn't practical to get 2 wireless keyboards and mice, so I'm looking if Apple will support mirroring the display at full resolution (or indeed just the ability to turn the laptop monitor off, to allow the 2nd display to run at full resolution...)
(Works fine on the same macbook pro when running Windows 7 in Bootcamp, so must be technically feasible).

I have a 1080p monitor. The mac is not able to output to this at full resolution when the displays are set up to 'mirror' (connected to 2011 macbook pro via DVI- thunderbolt adaptor used).
Previously in Snow Leopard I was able to attach the monitor (via DVI with a thunderbolt / mini display port adaptor), close the lid of my macbook, then insert a USB device, to wake the computer from sleep mode. Upon waking from sleep, the computer would detect the external monitor and display at full 1080p resoltion. The lid of the computer could then be opened to use the laptop keyboard and trackpad.
In Lion, the above process works, however when the lid of the laptop is opened, the detect display process seems to run again and the laptop screen turns back on and the external display will no longer mirror at full resolution.
I already have an apple wireless keyboard and mouse, but am using these with another computer- so cannot use these with the laptop (this configuration would allow me to work with the laptop lid closed, and hence keep full resoltion on the external monitor). It isn't practical to get 2 wireless keyboards and mice, so I'm looking if Apple will support mirroring the display at full resolution (or indeed just the ability to turn the laptop monitor off, to allow the 2nd display to run at full resolution...)
(Works fine on the same macbook pro when running Windows 7 in Bootcamp, so must be technically feasible).

Is anyone else had a problem with the hdmi mirroring with the new Ios5 update? I'm getting sound but no video. It was working fine before.

Help with this please. AFter updating to IOS5 I can no longer mirror my Ipad2 with the Apple hdmi av adapter.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

My 2nd gen IPOD touch will no longer sync with itunes.

My 2nd gen IPOD touch will no longer sync with itunes. it tells me it cannot read the contents of the ipod then it says the ipod software server cannot be contacted. Any suggestions?

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem
Then try restoring again.

My ipod nano will no longer sync with itunes since i have purchased an iphone 4s and synced it with itunes.

My ipod nano will no longer sync with itunes since i purchased an iphone 4s and synced the phone with itunes. When I plug my ipod into my imac, it does not even read or recognize my ipod. What do i do?

Are you using the original cable that came with Nano and not your iPhone's cable? Have you worked through the troubleshooting in this Apple support document?
http://support.apple.com/kb/TS1410
B-rock

After purchasing songs at the itunes store, ipod touch will no longer synch with the itunes library at all. Also a lock symbol is now on the ipod touch. How do I fix this

After purchasing songs at the itunes store, my ipod touch will no longer synch with the itunes library at all. It won't send the purchases to the device and it won't synch any other music to the device. Also a lock symbol is now displayed at the top of the ipod touch. How do I fix this.
This was the first purchase I made.

Are you following these instructions?
iTunes: Syncing media content to iOS devices and iPod
Where is the lock icon on the screen?

Function keys no longer working with a new keyboard...

I got a new keyboard and my function keys no longer work with it. I am used to have them used in the standard format, i.e. F10-F12 control the voume, etc. I have the "Use all f1,f2, etc." button clicked. I have also tried restarting my computer. Any thoughts?

Try doing a SMC reset and PRAM reset.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

No longer mirroring with 10.8

Similar Messages

Maybe you are looking for