No message for validation error "format", type "date", field "date-expired"

Dear
Guys,
i am getting the following error : ((No message for validation error "format", type "date", field "date-expired"))
When trying to upload adobe connect 7 license to the adobe connect 7 configuration wizard. the problem occurs because my server was install on Arabic Saudi Arabia date format while installation, but if i change the windows date format to US then the problem still occurs, and formatting windows is not possible, could anybody help??
Regards

Thank you for replying,
No i am not on host mode, a have installed it deferent times ago successfully, but the only problem now is that during the installation windows server 2008 the default language, time and date. Was set Arabic Saudi Arabia. And even changing it does not solve the problem, as i mentioned above.

Similar Messages

  • How to create messages for Validation in transaction type OB28

    Hello All!
    I am creating a validation in transaction type ob28. I have created the first point "prerequisite", second point "Check" and in the third point "Message" I want to put the message number 016 but the next error appears "Entry E ZFI 160 does not exist in T100". How can I create this messages number?
    Thank you in advance!

    Hi Leyre,
    This message applies to a problem with change requests. When creating a message, it's a workbench request that system has to create. Apparently, when you try to create a message, it tries to catch 'tramp' on existing CR which is assigned to a different client in your system. You should try assigning a new CR for this change; you could ask your BASIS team to help you on this.
    Regards,
    Eli

  • Reserved error (-7732); there is no message for this error.

    I have been trying for months to link an Oracle 10g database to my Access 2010 database. I have successfully added the appropriate Oracle ODBC connection. However, when I try to import a table from the database, I get the error "Reserved error (-7732);
    there is no message for this error." Really useful, isn't it? I've tried searching both the Microsoft and Oracle forums but no solution that I've seen on this error has been able to fix this. I have a Windows 7 64-bit machine, I'm running 64-bit Office
    and cannot change to the 32-bit version. I have the 64-bit Oracle ODBC driver installed properly as well. Does anyone have any other information on this error? It boggles my mind why someone would come up with this error and not have any further information
    on it but still bother to put "there is no message for this error." Anyway, someone please help me out. Thanks.

    Hi,
    As far as I know, this is known to occur with 64 bit versions of Access 2010 and Oracle Instant Client tools when the Oracle Instant Client/Data Access Components are lower than version 11.2.0.3.0.
    Please try to update the Oracle data access components to version 11.2.0.3.0 or newer.
    Here is the link to download the latest data access components from Oracle
    http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
    More reference:
    Installation instructions
    http://www.oracle.com/technetwork/topics/dotnet/downloads/install112030-1440546.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Regards,
    George Zhao
    TechNet Community Support

  • A t.code to create Messages for Validations (OB28)

    Hi All,
    could anyone tell me ow to create Messages for Validations (OB28) ?
    Is there a t.code to manage  the messages ?
    Thanks

    Hi,
    The transaction is SE91.
    Regards,
    Eli

  • Getting validation error "argument type mismatch"

    I have 2 dropdowns and submit button in jspx page. jspx page has corresponding backing bean with respective properties. When I select values in dropdowns and hit submit I am getting redirected to same page with validation error "argument type mismatch" beneath the dropdowns.

    Kate, I bet there is more to the error than you have given here. If I were a betting man I would say it has something to do with the difference between a jbo Number type and the java Number type. I have run into this particular problem twice before. Basically the oracle jbo Number type is not compatible or automatically caste-able into a java type Number. So, perhaps in your backing bean, you have some thing that is defined as a Number in one of jdeveloper's declaritive fields (jbo Number) and in a java program somewhere you have probably declared a variable as just plain-old Number which is a different class...coming from Java's built-in types classes.
    Hope that's your problem, and I hope this helps.
    Michael F.

  • Custom Error Message for Validation.....

    Here is my Validation:
    I want the error which is grown from what is wrong on the page to display after the validation.
    the GUI for validation will not let me leave the Validation ERROR box empty...just not sure how to get around this.
    DECLARE
    isValid BOOLEAN := TRUE;
    message VARCHAR2(4000):='';
    BEGIN
    if (:P14_EXISTING_METRIC_NAME IS NULL and :P14_METRIC_NAME IS NULL)
    then
    message := 'Metric Name is Not Chosen:';
    isValid := FALSE;
    end if;
    if   (:P14_EXISTING_SUB_VALUE IS NULL and :P14_METRIC_SUBNAME IS NULL)
    then
    message := message || ' Sub Metric Name is Not Chosen:';
    isValid := FALSE;
    end if;
    if NOT REGEXP_LIKE(:P14_METRIC_VALUE,'expression')
      then
    message := message || ' Value is not Numeric:';
      isValid := FALSE;
    end if;
    if NOT isValid
    then
       raise_application_error (-20001,message);
    end if;
    END;Edited by: bostonmacosx on Feb 27, 2013 12:05 PM

    SO what I did was make sure that the process doesn't go false:
    and at the end just checked my messages and added an error on the end. WHEW hope this helps someone in the future.
    DECLARE
    isValid BOOLEAN := TRUE;
    message VARCHAR2(4000):=NULL;
    BEGIN
    if (:P14_EXISTING_METRIC_NAME IS NULL and :P14_METRIC_NAME IS NULL)
    then
    message := 'Metric Name is Not Chosen<BR>';
    end if;
    if   (:P14_EXISTING_SUB_VALUE IS NULL and :P14_METRIC_SUBNAME IS NULL)
    then
    message := message || ' Sub Metric Name is Not Chosen<BR>';
    end if;
    if (NOT REGEXP_LIKE(:P14_METRIC_VALUE,'^(\d{1,99})\.(\d{0,99})$') or :P14_METRIC_VALUE IS NULL)
      then
    message := message || ' Value is not Numeric<BR>';
    end if;
    if message IS NOT NULL
    then
    apex_error.add_error (
            p_message          => message,
            p_display_location => apex_error.c_inline_in_notification );
    end if;
    END;Edited by: bostonmacosx on Feb 27, 2013 12:52 PM

  • LogProviders.Add fails with "not recognized as a valid log provider type." in Data Tools but not BIDS

    In attempting to add standard DTS logging to a package via Data Tools, I found that my attempt to execute:
            Dim provider As LogProvider = p.LogProviders.Add("DTS.LogProviderTextFile.2") 
    (or any other log provider type,) resulted in:
    The log provider type "DTS.LogProviderTextFile.2, {0A039101-ACC1-4E06-943F-279948323883}" specified for log provider "{CC5CB9A4-E0D5-4ECD-8F4E-1E8FB9BDE8A6}" is not recognized as a valid log provider type. This error occurs when an
    attempt is made to create a log provider for unknown log provider type. Verify the spelling in the log provider type name.
    I created a new package with a single script task using only the example code from the MS documentation for Embedding Logging Programmatically at:
    http://msdn.microsoft.com/en-us/library/ms136023(v=sql.110).aspx
    consisting of:
    Imports Microsoft.SqlServer.Dts.Runtime
    Module Module1
    Sub Main()
    Dim p As Package = New Package()
    Dim loggingConnection As ConnectionManager = p.Connections.Add("FILE")
    loggingConnection.ConnectionString = "C:\SSISPackageLog.txt"
    Dim provider As LogProvider = p.LogProviders.Add("DTS.LogProviderTextFile.2")
    provider.ConfigString = loggingConnection.Name
    p.LoggingOptions.SelectedLogProviders.Add(provider)
    p.LoggingOptions.EventFilterKind = DTSEventFilterKind.Inclusion
    p.LoggingOptions.EventFilter = New String() {"OnPreExecute", _
    "OnPostExecute", "OnError", "OnWarning", "OnInformation"}
    p.LoggingMode = DTSLoggingMode.Enabled
    ' Add tasks and other objects to the package.
    End Sub
    End Module
    I get the same error as listed above in SQL Server 2012 Data Tools on three separate machines.  On my primary dev box, where the code fails in Data Tools, running the exact same code in BIDS runs without problems.
    Importing the working BIDS package into Data Tools also fails with the same error.
    I have not encountered any other 2012 Data Tools issues, but logging is a core pattern that makes me worry that this is a problem that may emerge with other functions in the DTS toolset.
    Thanks for any help!!

    Arthur,
    Great idea, I verified that the Integration Services for 2012 was not installed.  I installed the new SSIS service and verified that SQL Server Integration Services 11.0 was running (previously only 10.0 was running.)
    Initially, I experienced an error message trying to run my simple script above:
    Could not load file or assembly 'Microsoft.VisualStudio.Tools.Applications.Core, Version=10.0.0.0,...
    I followed the steps at the MS link for Could not load file or assembly ‘Microsoft.VisualStudio.Tools.Applications.Core’
    and loaded the missing x64 runtime from edist/VSTA/runtime/x64/VSTA_RT30.msi
    on the distribution media as recomended.
    The script ran, but returned the error listed in the beginning of this message.  I then tried:
    - turning off the 10.0 service
    - setting the project's Run64BitRunTime value both false and true
    - changing the reference to Microsoft.SqlServer.ManagedDTS.dll from C:\Program Files (x86)\Microsoft SQL Server\110\SDK\Assemblies to C:\Windows\Microsoft.NET\assembly\GAC_MSIL\Microsoft.SqlServer.ManagedDTS\v4.0_11.0.0.0__89845dcd8080cc91
    all of these resulted in the same failure.
    Thank you for the suggestion, I really thought it would be on target.  Alas, it wasn't the fix.
    It is so weird that all the other stuff I'm doing (a very elaborate programmatic package generator doing some tricky stuff,) works fine and only this super basic logging fails!!!!
    Thanks again,
    --Tim

  • Acknowledgement for validation error.

    Hi,
    I have configured two trading partners Acme & Globalchips over Rosettanet Pip3A4 standard.
    the configuration is running fine for both Order Request and Order Confirmation.
    For a typical scenario when i am turning validation ON at the Globalchip side ,and send an invalid Pip3A4 request message.
    I am getting Validation error at Globalchips, i want to Globalchips to acknowledge this error to Acme which is not happening now.
    State of the request at the ACME end is "Wait ACK".
    Acme should get an exception acknowledgement that a validation error has occured.This is our requiremnt.
    Please Suggest .
    Thanks & Regards
    Sachin Rathi

    Hi Ramesh,
    I have captured the logs in the debug mode for the realtime scenario and forwarded to "dheeraj".
    Where trading partner Acme and Globalchips are replaced by BTGS and COMSTOR.
    COMSTOR is sending BTGS a Pip3A4 Purchase Order Confirmation xml which is invalid.
    It raise an exception "General VAlidation Error" at BTGS.
    however BTGS is not able to acknowledge this exception to COMSTOR.
    due to which the state of transaction in Comstor is Wait ACK.
    Please let us know if u want any further inputs.
    Thanks & Regards
    Sachin Rathi

  • FA/997 for Validation Error

    Hi All,
    I need some clarification on receiving the 997/FA for the Validation error that happens at the remote trading partner.
    Will the 997 payload contain the details of the error in it??
    How will B2B interpret the FA as positive FA or negative FA?
    In my case the payload which I am sending is getting validation error at receiving side, they are sending me the FA. But in my side, both the initial transaction and the ack transaction goes to MSG_Completed state. Is it a normal behavior?
    Thanks in advance.
    Regards,
    Monica

    Hi,
    1. The 997 has fields which will tell if the EDI transactions has SNIP errors. In your case, the outbound EDI should goto MSG_ERROR.
    2. In a 999 transaction, the fields such as AK9, IK4, IK5 will tell the problem in the EDI, I am sure 997 should also have something like that.

  • Error while inserting date field data in user nanaged cache group( program)

    Hi,
    I had usermanaged cachegroup, it is working fine as expected when I insert the record on the ttIsql prompt but when I try to insert the record programmatically (using c language ) it gives me the following error for date field
    pthread_kill(??, ??) at 0x90000000217d214
    praise(??) at 0x90000000217cc68
    raise.raise(??) at 0x900000000050c84
    abort() at 0x90000000007ac1c
    getExports.getPtrArrayIf() at 0x9000000030a16c0
    datetime.sbPatCmp() at 0x9000000033033ec
    cacheAgingAPI.hashString() at 0x900000003663eac
    unnamed block in ttBdbOraInputValue(0x7000000476efbb0, 0x73000000000073, 0x70000004866dea8, 0x113d8fdf0, 0xfffffffffffd250, 0x113d8fdf8, 0x113c1def0), line 690 in "bdbConvert.c"
    ttBdbOraInputValue(0x7000000476efbb0, 0x73000000000073, 0x70000004866dea8, 0x113d8fdf0, 0xfffffffffffd250, 0x113d8fdf8, 0x113c1def0), line 690 in "bdbConvert.c"
    bdbBufferStmt(0xf9000000d2845518, 0x834d0, 0x623e8b8, 0x73000000000073, 0x0, 0x0, 0x100000001, 0xfffffffffffd3f0), line 1290 in "bdbTblH.c"
    ttBDbTableHInsert(0xf9000000d2845518, 0x834d0, 0x623e8b8, 0x73000000000073, 0x0, 0x113c1def0), line 991 in "bdbTblH.c"
    sbTblStorLTupInsert(0x7000000415347c8, 0x700000083668090, 0x0, 0x0, 0xfffffffffffd928, 0x113c1def0), line 15648 in "table.c"
    eeDML.sbEeInsertEval(0x70000008385d7c0, 0x7000000833cff98, 0x0, 0x113c1def0), line 5035 in "eeDML.c"
    eeDDL.sbEeStmtEval(0x423ac4c8, 0x7000000833cff98, 0x113c1def0), line 12100 in "eeDDL.c"
    sbSqlCmdExec(0x70000008385d618, 0x0, 0x0, 0xfffffffffffe670, 0x0, 0x0, 0x113c1def0), line 4052 in "cmdExec.c"
    sb_sqlExec(0x113d27f68, 0x0, 0x0, 0xfffffffffffe840, 0x0), line 1470 in "sqlAPI.c"
    cxlSqlExecute(0x113d273d0), line 3436 in "cxlsql.c"
    stmtExecPart2(0x113d273d0), line 1372 in "vsexec.c"
    stmtExecute(0x113d273d0), line 948 in "vsexec.c"
    SQLExecDirect(0x113d273d0, 0xfffffffffffeb20, 0xfffffffdfffffffd), line 172 in "sqlexec.c"
    Can please guide me.
    Regards
    S

    I have tried but still I am not getting, can u check it out weather we have possibilites to work with DB links or shall i remove it.

  • Numeric, date field data to be in English format

    My Characterset on 10g AS & 10gdb, NLS_LANG=ARABIC_KUWAIT.AR8MSWIN1256
    In my all arabic screen numerical number & date fields are in arabic. Instead all numeric & date fields should be in English. I have tried settting NLS_LANG=AMERICAN_AMERICA.AR8MSWIN1256 on Application Server. But no use & also by doing this just runtime application is doing flip,,ie from left to right.
    i know I can query using below
    TO_CHAR(hiredate, 'DD/MON/YYYY', 'nls_date_language = ENGLISH')
    Is there any way of doing that at database level, so that all fields of applicaton of type numeric & date are in english.
    thanks

    In reports I am getting Numeric & date format in English. But only forms all these are in arabic.

  • How to display an error message after validation in Formatted Search?

    Hi SBO experts,
    if an error is detected on validation in a Formatted Search, how to display an error message to the user entering the data?
    Thanks & Regards,
    Raghu Iyer

    i created a formatted search query & attached it to the field 'Quantity' at Line Item level in Sales Order screen. just for testing purpose, i eneterd the following code lines in the query validating 'Quantity'
    if $[$38.11.0] > 50
    begin
    select @error = 1
    select @error_message = 'Vendor code cannot begin to X sign.'
    end
    the system throws the error : Internal error (8180) occurred [Message 131-183]
    actually, i need to display an error message to the user if Quantity is not in multiples of the OITM.SalFactor2
    if $[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode]  = $[$38.1.0]) > 0
    begin
    select @error = 1
    select @error_message = 'Error in Quantity.'
    end
    but, this expression to get the remainder itself seems to have some error
    $[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode]  = $[$38.1.0])
    i guess, % operator is used for modulo (to find the remainder of one number divided by another.) ? am i right ?
    Regards,
    Raghu Iyer

  • Error Message for new production order type

    I have created a new production order type and gone through all the configuration requirements that I'm aware of.  In testing this new order type, I get an error message in transacion CO02 when selecting the printer icon. The error is as follows:
    No reference document type defined for order type ZRWK
    Message no. CO179
    ZRWK being the new order type.
    I've searched through many posts and found nothing relating to this message.  Hopefully someone has encounted this before.
    I'm sure I've missed something, but can't pinpoint what it is.
    Help is greatly appreciated.

    Bob, did you check your print parameters?..Maybe you don't have your sap forms..You can check it with Tx. COPI
    The path is Print - Print Settings - Configuration Menu.
    Diego

  • WDA: No message for validation check on dynamic context / UI

    Hello,
    The WD framework is checking user input to the UI elements automatically.
    If I use an input field ( bound to a structure containing  a Data Element of type DEC 3   for example) and enter a non-numerical value I will see this message:
    "The Entered Value Can Only Contain Numerical Characters"  
    in the message area.
    If I do the same with dynamic code ( Context and UI elements are created dynamically) this message does not appear.
    The application behaves  like the "manual built" one ( I can't navigate away until the "wrong" value is corrected ), but the inputfield with the "wrong content" is not highlighted and the message is not displayed in the message area.
    I'm using the following methods to create the dynamic UI:
      CALL METHOD cl_wd_dynamic_tool=>create_nodeinfo_from_struct
        EXPORTING
          parent_info    = lr_root_node_info
          structure_name = lv_linetype_name
          is_multiple    = abap_false
          node_name      = dyn_field_context_name
        RECEIVING
          new_node       = lr_node_info.
    CALL METHOD cl_wd_input_field=>new_input_field
            EXPORTING
              id             = lv_input_id
              bind_read_only = lv_bind_read_only
              bind_value     = lv_bind_name
              length         = lv_length
              VIEW           = lr_view
            RECEIVING
              control        = lr_input_field.
    Is there anything else that I need to do to make the message appear?
    We are running on NW2004s/SP9
    Best Regards
      Waldemar
    There is a problem in the method
    CL_WDR_MESSAGE_MANAGER->GET_MESSAGES_FOR_WINDOW().
    In my case we had two views with the same name (one in a start-component, one in the target-component). After renaming the 2nd. view everything works fine.
    Note 964613 describes a similar problem, but didn't solve ist entirely.
    Message was edited by: Waldemar Knorr

    It is disconcerting that I have read in the forum that the column value references such as f0x and its row number are required to get it all working (as a DOM or JQuery selector).Not necessarily. One possibility is to use descendent jQuery selectors to attach the dynamic action event handler by column heading:
    td[headers="HIREDATE"] input

  • How can I change the message for an error and then cancel it

    Hi everyone.
    I am currently developing an application where I have to use a trigger (DAQmx). Now it can happen, that the user (who will operate the device later on) can activate the trigger without a valid source. After a timeout, he will get a quite strange message stating he either might want to wait longer (Error -200284 occurred at DAQmx Read). I would like to redefine this error.
    So if this error number appears, he should get a message saying: "Your request couldn't be executed, since no valid trigger signal was found".
    How would I do this .. Thanks for help

    Hi Somnatic
    There are different ways. As you describe it, you'd like to cancel the occuring error (-200284) and show another message. I attach a vi with a view ways.
    Hope this helps.
    Thomas
    Using LV8.0
    Don't be afraid to rate a good answer...
    Attachments:
    ClearError.vi ‏80 KB

Maybe you are looking for

  • Spore? Does it work with the Mini?

    I would like to have a game for my Mac mini and I am wondering could Spore work for it? I don't want people to say get this game, I just need to know.

  • Where can I find my gifted apps?

    Hello, I have just bought a Pro. My mum bought me the Pages, Numbers and Keynote apps and gifted them to me. I downloaded them all through the email that was sent to me. I cant find them on my Pro, but can see them in my itunes? What am i doing wrong

  • Need a stand alone flash player

    currently l have version 7 installed that came with Flash MX problem is on occasion l find its not up to its job.. basically put l want a more up to date version of the stand alone player so l can run files made with newer versions as the stand alone

  • Mail server help

    Hi all, I'm newbie on the mac email server. I did some postfix configuration but it seems like not working at all. Is there a way to revert/restore all the default configuration on postfix other than reinstall the entire mac server?Appreciate if anyo

  • Adobe Reader forgets my view settings.

    I have installed Adobe Reader X for Windows XP SP3. Everything working fine. I have customized my toolbar, shown the left pane with page previews and hidden the menus. I like this layout. But everytime I close Adobe Reader and open it again, the menu