No mnemonic or focus when using HTML for a components text

When using HTML to set the text for a JLabel, JRadioButton or JCheckBox; mnemonics are never displayed and the outline depicting focus is never painted. Any ideas why? Any way of fixing this? Is it a known bug?
JRadioButton radio1 = new JRadioButton( "<html>This is a test!</html>" );
radio1.setMnemonic( KeyEvent.VK_T );
radio1.setDisplayedMnemonicIndex( 8 );Thanks in advance,
Jamie

The accuracy of this response may vary depending on the look and feel you're using.
The JRadioButton and, by virtue of being a subclass, JCheckBox are painted by the look and feel class. Those classes behave differently for HTML text. If the text property is HTML, that is there is a javax.swing.text.View that is responsible for rendering the text there is not even a call to paintFocus so the focus is never painted.
Also, if there is no text the focus is not painted. This will happen if you create a JRadioButton with no String argument and use a separate JLabel with setLabelFor(Component) to associate it with the JRadioButton. The actual guts of the radio button never ever seems to show any indication of focus under any circumstances.
I can only assume this is deliberate (rather than a bug) since there's fairly deliberate non-calling of methods and no provision for the focus indicator to be painted when there's no text associated with the JRadioButton or JCheckBox.

Similar Messages

Service Notice - EOS 5D Mark III and EOS-1D X: acquire focus when using Speedlite's AF Assist Beam

Hi everyone,
We have an update for the EOS 5D Mark III and EOS-1D X focus when using Speedlite's AF Assist Beam topic. The estimated release date for the firmware update for the EOS 5D Mark III digital SLR camera is late April. 2013 and the estimated release date for the firmware update for the EOS-1D X digital SLR camera is late May 2013, as noted in the following product advisory:
"Service Notice: EOS 5D Mark III and EOS-1D X: acquire focus when using Speedlite's AF Assist Beam."
Thanks again for your participation feedback on our Forum!

I just hope Canon remembers there are users of the product worldwide and not just Costa Rica and the USA....
Everyone should have their relevant update released at the same time and never mind contact your local support for further advice...! it should apply across the board
EOS 5D MKIII + EF 24-105mm f/4L IS USM, Sigma DG 150-500 5-6.3 APO HSM, , EF 55-200mm 4.5-5.6 USM, Speedlite 430EXII
EOS 350D, EFS 18-55mm

Can not print report when using HTML or DHTML

Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
Any Ideas?
Thanks
Jeff

Hi,
I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
Thanks,
SK.

Mac user, PS CC 2014 latest version. When using "Save for Web" I bring my 900 x600px @72 ppi in to SFW and the output becomes 300ppi. The only way it stays at 72ppi is if I check "none" for metadata. I know to should not matter much, but I would prefer to

Mac user, PS CC 2014 latest version. When using "Save for Web" I bring my 900 x600px @72 ppi in to SFW and the output becomes 300ppi. The only way it stays at 72ppi is if I check "none" for metadata. I know to should not matter much, but I would prefer to keep all my web jpgs @ 72ppi. Any solutions?

It opens up as 900x600 @300ppi
Here's a screenshot-

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

Pages-when using template for envelopes can you import names/address from address book

When using templates for envelopes can you import names/address from the address book?

Drag the VCard from Address Book onto the open envelope template.
If you want mutiple addresses make a Group of those in Address Book and drag the Group icon onto the Pages template.
Peter

Is it possible to ignore "Rigid relationships between attributes cannot be changed" when using ProcessUpdate for Dimension?

As per the title is it possible to ignore "Rigid relationships between attributes cannot be changed" when using ProcessUpdate for Dimension?
We have a case where very rarely an item might have been miscategorised so the brand is manually changed. We want this dimension to be rigid to speed up ProcessUpdate.
We do a ProcessFull each night, so it will get corrected then, but during the hourly updates we would just like to ignore this error if possible?

Hello,
The rigid relationship should be defined when the members will not change over time. Here are some threads regarding rigid relationship for your reference, please see:
Processing OLAP Cube: http://social.technet.microsoft.com/Forums/sqlserver/en-US/17a55593-9543-404e-a579-0a011965585d/processing-olap-cube?forum=sqlanalysisservices
Flexible and rigid relationship: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d8f5443-065d-4485-9385-6f0b5fa417da/flexible-and-rigid-relationship?forum=sqlanalysisservices
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

What is a valid location for autorecovery files when using Word for MAC?

What is a valid location for autorecovery files when using Word for MAC?

Microsoft Word for Mac support forums is probably a better place to ask.

HT4864 My outgoing email as stopped working when using Outlook for mac 2011. Any suggestions?

My outgoing email as stopped working when using Outlook for mac 2011. I have deleted and reinstalled the account twice. I have 11 gig free on my iCloud account. The outgoing server is set at smtp.mail.me.com using port 587. If I was able to reinstall the account, I am positive I have the correct password. I can log into my iCloud accout using the same credentials.
Any suggestions?

I called Microsoft to fix my problem...for those maybe having the same issue, I was told by the Tech to use this outgoing server setting - p06-smtp.mail.me.com
All is working fine since doing so.

When using imovie for Ipad, how can I fast forward a project to cut the length down?

When using imovie for Ipad, how can I fast forward a project to cut the length down to fit under the 15 minutes required for Youtube? My current project is 23 minutes, and need to cut it down below 15 minutes. I was hoping to speed up the video. The content would actually be better viewed in at a faster speed anyhow.

Jon,
It sounds like you did, just as you should, Save_As and Delete everything that is unwanted. If you did the Deletion from the Timeline, there should be nothing from the old Project, that should be included. A DVD is Transcoded and burned from the Timeline. If the Assets are not there, they will not included in the DVD, even if you did not Delete anything from the Project Panel.
Tell us about the Clips now on your Timeline. Also, can you check the Timeline, by hitting the \ (Backslash key), and looking near the end of the Timeline. Do you have any "orphans" out there? Check all Video Tracks, even if you have to scroll to see them all. Does the Duration of the Timeline (viewed in the Program Monitor) match what you think that it should? If not, then you most likely have orphans, that you missed Deleteing.
Good luck,
Hunt

Problem when pressing ENTER for InputText object text

Hi,
I encountered a very strane anomly when pressing ENTER for
InputText object text.
1) I set the InputText object for having maxium 2 characters.
2) I set the InputText object for getting only numbers using
.restrict= "0-9";
Now, say the InputText is now empty.
1) Say I press the number "7" - the text line is now
containing - "7".
2) Now, I press ENTER - the "7" is cleared from the text
line.
Now, while the text box is clear, we think that we can insert
2 numbers.. but not!
3) I press a number, say "9" - the line contains "9"
4) I try to insert another number... but I can't!!
In order to be able to insert two numbers, I have to press
twice the Backspace in order to clear the "9" , and another ghost
note (the ENTER?).
How can I solve this anomaly?
Thanks
Yossi

Thank you very much! it works.
(Those tiny anomalies are so annoying, that it is so great
feeling to have them solved, thanks)

How to use stysheet for Swing components?

Hi,
Give me a guidence abt how to use Stylesheet for Swing components to crate good looking GUI...........thnx

thank you for your reply,
I want to know how many times a component is refreshed. I'm asumming the RefreshCondition attribute gets called everytime a component gets refreshed, hence it could be counted.
I'm just not sure how to use it.

Question about file size when using "Export for Web"

Hi!
I created a .mov file and worked to get a great balance between file size and quality so that I could deliver it via the web and make it easier for end users to see the video on a slower connection.
My question: When I use "Export for Web," my .mov file is converted into a very large .m4v file--more than double the size of the original file. I know that this export option is to optimize the file for a wide variety of users/internet speeds. Am I correct in guessing that the end size is not an issue? I would post the .mov file instead, but I really like the option of embedding into a html page along with the "click to play" option.
Bottom line--is it better to post the smaller .mov file that i originally started with or to go ahead and link to the bigger .m4v file that was created with the "Export for Web" option?

"Export for Web" is a feature of QuickTime Pro and it makes 4 files and the html page code for easy copy/paste Web page editing.
The very first file is called a "reference movie" and it links to the other 3 files (56kbps, 900kbps and 1.5Mbps). It, and the page code, "read" the connection speed of the viewing hardware and "serve up" the correct file based on that connection speed.
In nearly all cases the "Desktop" version would still be smaller in file size than the original source. The times the file would "increase" in file size would be when an already compressed was used as the source file. You can find out more about your source file by opening it in QuickTime Player and viewing the Movie Inspector window information.
There are dozens of other html "tricks" that could be used if your source file is already compressed but you want a different display size:
Page code to show "aspect" or scale="tofit". This code allows values "outside" of those found in the actual QuickTime file be used for the Web page display. A 320X240 QuickTime .mov file looks pretty good at double size (640X480) but the file size would still be that of the source file.
"Poster Movie" is another html trick that loads the Web based file directly in the QuickTime Player application (bypassing Web page layout restrictions). These files are also known as "Presentation Movies".
Another method is the QuickTime Media Link file (.qtl). These are simple text based files that are used as a "direct link". These use simple XML (Extensible Markup Language) and are easily created in any text editing application. The simple syntax has amazing control over a simple QuickTime .mov file. You can launch (and quit) the QuickTime Player, display at other dimensions and even embed "links" inside the display.
Some of my files as examples:
http://homepage.mac.com/kkirkster/Lemon_Trees/ a "Poster Movie" style.
http://homepage.mac.com/kkirkster/.Public/RedneckTexasChristmas.qtl
A QuickTime Media Link file. A tiny file should download to the viewing machine, launch QuickTime Player, present the movie and it even includes a "link" to my Web page.
Edit: It appears you must now double click the .qtl download to launch QuickTime.

No sound when using Airplay for Movies on Apple TV

For reasons unknow, when I try to stream full length movies (Lion King and Nemo bought from iTunes) from my iPhone or Macbook Pro using Airplay, there is no sound. When I stream smaller movies, like Boundin' the Pixar Short, there is no problem.
Side note 1: Why do purchased movies not show up like purchased TV shows on Apple TV? I feel like I shouldn't have to use Airplay for movies if I don't need to use it for TV shows I buy.
Side note 2: For some Netflix movies played directly from Apple TV there is no sound. Other movies work fine and the movies that work or don't work seem to change day to day.
Thanks for your help.

Gldsndz wrote:
Side note 1: Why do purchased movies not show up like purchased TV shows on Apple TV? I feel like I shouldn't have to use Airplay for movies if I don't need to use it for TV shows I buy.
Apple has not negotiated the rights to allow this is the assumed reason.
We can't even play Purchased music or TV Shows from the cloud in UK.

Single Vertical Line When Using ADF for Scan or Copy on HP Officejet Pro 8600

HP Officejet Pro 8600 Premium Printer (CN577A)
OS: MS 7 64 bit
When using the ADF for my CN577A HP Officejet Pro 8600 Premium printer, I get a single vertical line on the document that is produced. This occurs when copying or scanning, both in black and white, and in color. If I scan or copy using the glass, I don't get the vertical line.
I already tried the troubleshooting. I unplugged the printer, left it without power for several minutes; that didn't correct the problem. Next, I cleaned the rollers and the glass; I still get the vertical line, but only when using the ADF.
My firmware version used is current (CLP1CN1150CR).
What should I check next?
This question was solved.
View Solution.

The ADF uses its own glass area on the scanner bed, it is the narrow (about 1" wide) strip on the left. Cleaning this area should resolve the issue. A single small spot would cause the issue you are seeing.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

No mnemonic or focus when using HTML for a components text

Similar Messages

Maybe you are looking for