No Objects Found error during Sender agreement in ID
I created all objects, activated in IR and refreshed Cache with SXI_Cache.
Created Scenario in ID.
During Sender agreement creation, I gave Sender Service ( Which doesn't have to be in SLD ). Then Iam trying to pick Interface from drop down. Surprisinglt I cant see any object instead it throws error "No Objects Found" .
What should I do to see the Interfaces from Design?. Any suggestion here ?
Iam doing File to File scenario with Business Service.
Thanks
S T,
from what you've said, you're using Business Services and not Business Systems.
Business Services are simpler (in the sense that you don't need to refer them in SLD and all), but the catch is that they don't have some useful stuff that Business Systems have.
One of these is that, for Business Systems, all the interfaces that are in SWCVs which belong to that BSy are automatically considered as valid interfaces for that BSy.
As for Business Services, you have to define all the interfaces that you want in the BSe, one by one. The good news is that you can use the Message Interfaces of any SWCV of Integration Repository, without having to specifically add the SWCV to the BSe (which can be a pain in the @$$ some times...).
To see and/or include message interfaces for a Business Service, just double click on it on Scenario or Objects tabs of Integration Directory.
Regards,
Henrique.
Similar Messages
-
HTTP response code 500 : Error during Sender Agreement Determination
I am trying a simple file to file scenario and messages are not being received in Integration Server.
Through communication channel monitoring, i have received the below error message.
Error Transmitting the message to
endpoint http://<hostname>:50000/sap/xi/engine?type=entry using
connection File_http://sap.com/xi/XI/System failed, due
to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException:
Received HTTP response code 500 : Error during Sender
Agreement Determination.
Can you please help
Regards
HarishHi Harish,
http://<hostname>:50000/sap/xi/engine?type=entry
it should be http://<hostname>:8000/sap/xi/engine?type=entry not 50000 as port It should be your HTTP port...please .make the changes !!
In SXMB_ADM transaction under Integration engine configuration please change the settings to http://<hostname>:8000/sap/xi/engine?type=entry
make sure with your basis team that ur http port is 8000 or 8001 ..as per that make the necessary changes..
Regards, -
Error when sending message: 500 Error during Sender Agreement Determination
Hi,
Am getting this error, while testing to post a data from RWB. can anyone tell me what the problem is? its IDOC to JDBC scenario. i've checked all the config objects in the scenario and they all seem to be fine.
Regards,
RashmiHi Prateek,
i have created sender agreement, as i ran config wizard to create the scenario and it forced me to create a sender agreement.
Seshagiri, i tried using the test tool you mentioned, Interface Mapping step is failing and the error i'm getting is:
During the application mapping com/sap/xi/tf/_outCustomerDetails_DEBMAS_DEBMAS03~ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~
any clue?
Regards,
Rashmi -
Error during sending sales idoc
hi all,
i m getting error during sending idoc for sales.................
Error:Check value field assignment for Condition PN10.....
How to solve this...?
Regards,
Imranfriends.......argent.......
-
BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import
BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import
I've seen this issue since beta1. The issue seems to be related to a camera setting that stores the files in folders by date. The Folder structure becomes drive>DCMI>10202008>image.ARW
This "no photos found error" I have seen in beta1 LR1 LR1.1 LR1.2 LR1.3 LR1.4 and LR2.0 this is still an issue in LR2.1
Auto import works fine with canon or nikon RAW files (I've used several different cameras with no problems)
The Folder structure for canon files is drive>DCMI>100>image.CR2
Auto import Does not work with Sony A100 .ARW files with folders by date turned on I have heard from people with other Sony cameras like the A700 also have this issue.
Vista Ultimate 32bit SP1
AMD 64X2 duel core 6000+ 3Ghz
6GB 666mhz Ram PAE force enabled
NVIDIA Gforce 7600 256MB video card (1.75GB total with system shared ram)
Primary hard drive: 500GB
Hard drive 2: 400GB (system and photoshop paging files and lightroom catalog drive)
Hdrive 3: 1TB (primary image storage)
user control turned off
system graphics set to performance
Duel display
Lightroom 2.1
photoshop CS3I believe this is fixed in version 2.5 and 3.0
ARW (Sony Raw) files seem to work with auto import -
Error while transporting objects:Internal error during pvc call: Parameter
Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
YounusHi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM -
"Empty document Found" error while sending a text file
Below is the error I'm getting while I'm trying to send a txt file using a fiel adapter.
Channel FILE_TLE_Sender_SalesOrder_CC: Converted complete file content to XML format.
Channel FILE_TLE_Sender_SalesOrder_CC: Empty document found - proceed without sending message.
File "/data/TLE/XS1/inbound/850/Test_SalesOrder_3064_12-15-10.txt" deleted after processing.
On the Communication Channel this is what I have:
Recordset Name: DOCUMENT_ROOT
Recordset Structure: DOC_HEADER,1,PO_HEADER,1,TAX,,FREIGHT,,SPECIAL_SHIP,,DOCUMENT_NOTE,,SHIP_TO_ADDRESS,,PRODUCT,,LINE_SHIP,,LINE_ITEM_NOTE,,ASSOC_LINE,,ORDER_MEMO,,DOC_TRAILER,1
Key Field Name: keyfield
DOC_HEADER.fieldNames Value: keyfield,Source_System,Source_SUB_System,Source_Doc_Type,Source_Doc_Gen_Date,Source_Doc_Gen_Time,Source_Company,Source_Division,Source_Party_ID,Source_Ship_Location,Source_Sell_Location,Event_Name,Application_Program_File,Application_Program_Name,Destination_System,Destination_SUB_System,Destination_DOC_Type,Destination_Company,Destination_Division,Destination_Party_ID,Destination_Ship_Location,Destination_Sell_Location,Interchange_Control_Number,Group_Control_Number,Document_Control_Number,Date_Translated,Time_Translated,Primary_Key
DOC_HEADER.fieldFixedLengths Value: 30,30,30,30,10,4,30,15,30,20,20,8,30,30,30,30,30,30,15,30,20,20,10,10,10,10,4,30
DOC_HEADER.keyFieldValue Value: DOC_HEADER
DOC_HEADER.lastFieldsOptional Value: YES
DOC_HEADER.endSeparator Value: 'nl'
Then I have same pattern for PO_HEADER, TAX and so on....
Can someone tell me why this error is happening? I'm using the same exact parameters in another XI environment and there's no error there.> Channel FILE_TLE_Sender_SalesOrder_CC: Empty document found - proceed without sending message.
> Can someone tell me why this error is happening?
Maybe your source file is empty?
This is exact what the error message says. -
Regd. error in sender agreement(when to check sender uses virtual receiver)
hi Experts,
I am doing a file( SFTP adapter ) to IDOC scenario.
I got an error :
Couldn't retrieve inbound binding for the given P/S/A values:FP=XYZ;TP=;FS=XXXX;TS=XXXX;AN=XXXXXX;ANS=;
I checked my sender agreement and saw some "*" symbol displayed at the end on SA name.
To quick fix it and remove the star symbol'', i have just created SAgreement again and this time i checked "Sender uses virtual receiver " and revomved thestar symbol '' and saved without mentioning anything there.
When i tested it worked! but i want to know what made it work, is it the right practice.
i did a lilttle search on when to use "sender uses virtual receiver" option.i came to an understanding that it is mainly used to handle multiple input file formats in a single configuration scenario.
one more qns:
What are marketplace adapters,is this error comes when we use adapters which are not inbuilt or bought from external vender.
Regards,
Anika
Edited by: Anika Gulati on Jun 10, 2009 1:23 PMHere are few ways for it...
SAP Process Integration: When to Use u201CSender Uses Virtual Receiveru201D in a Sender Agreement
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40cb67f7-6464-2b10-bcb9-8edb9a3569f9
SAP Network Blog: Virtual Receiver - Why do you 'really' need it?
/people/shabarish.vijayakumar/blog/2008/09/16/virtual-receiver--why-do-you-really-need-it
-SM -
"NamingContextFactory class not found" error during deployment
Hi all!
I have a legacy app I need to migrate from JBoss 3.2.7 to 5.1.0 GA.
I have found 13 problems so far and I resolved 12 of them.
The problem I have now is:
Jboss shows this error during startup:
INFO [Http11Protocol] Starting Coyote HTTP/1.1 on http-127.0.0.1-8080
WARNING [collectionmgt] Error creating/registering StarcoreRootNode.
javax.naming.NoInitialContextException: Cannot instantiate class: org.jnp.interfaces.NamingContextFa
ctory [Root exception is java.lang.ClassNotFoundException: org.jnp.interfaces.NamingContextFactory]
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:175)
at com.starview.dm.collectionmgt.StarcoreRootNode.<init>(StarcoreRootNode.java:50)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:
39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorIm
pl.java:27
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.starview.support.startup.Startup.instantiateClasses(Startup.java:516)
at com.starview.support.startup.Startup.loadStartupClasses(Startup.java:310)
at com.starview.support.startup.Startup.access$200(Startup.java:50)
at com.starview.support.startup.Startup$1.run(Startup.java:130)
Caused by: java.lang.ClassNotFoundException: org.jnp.interfaces.NamingContextFactory
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at com.sun.naming.internal.VersionHelper12.loadClass(VersionHelper12.java:42)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:654)
... 12 more I see jnpserver.jar is present in common\lib\ folder, so don't really understand why this file can't be found. I also tried to copy jnpserver.jar , jbossall-client.jar and even jnp-client.jar to my_server\lib folder, but it didn't help.
I'm using Windows XP SP3, Sun JDK 1.5.0_18, JBoss AS 5.1.0 GA.
Which other info should I provide so it would be easier to help me? the startup script we use? jboss config files? jboss or app lib folder contents?Thanks everyone for your input.
I added the sshfactory.jar file in the JavaTask folder and it worked.
Thanks again.
Khanh -
Class Not Found Error during provisioning
Hello,
I am running on jboss-4.0.3-SP1, OIM 9.0.3 latest patch. I am new to this implementation and just rebuilt the dev environment. I am checking the provisioning of the resources and ran into a class not found error.
The error says:
2011-10-19 10:23:17,111 DEBUG [XELLERATE.ADAPTERS] Class/Method: tcADPClassLoader/findClass entered.
2011-10-19 10:23:17,111 DEBUG [XELLERATE.ADAPTERS] Class/Method: tcADPClassLoader:findClass - Data: loading class - Value: com.jscape.inet.ssh.SshException
2011-10-19 10:23:17,112 ERROR [XELLERATE.SERVER] Error encountered in save of Data Object com.thortech.xl.dataobj.tcScheduleItem
2011-10-19 10:23:17,112 ERROR [XELLERATE.SERVER] Class/Method: tcDataObj/save encounter some problems: com/jscape/inet/ssh/SshException
java.lang.*NoClassDefFoundError*: com/jscape/inet/ssh/SshException
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpFAPROVISIONING.implementation(*adpFAPROVISIONING.java:92*)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
xxxxxxxxxxxxx
When I looked at the process task named "FA Provisioning", line 92, I see this reference:
90:
91: //Initialize persistant object "INIT"
92: clsINIT = Class.forName("*com.cpsg_inc.oim.unix.SSHCommandExecutor*");
93: maoConstructorArgs = new Object[]{};
94: masConParamTypes = new Class[]{};
95: moCons = clsINIT.getConstructor(masConParamTypes);
96: INITconsObj = moCons.newInstance(maoConstructorArgs);
xxxxxxxxxxx
When I open the adapter task named iNIT Connection (this is the first task in the FA Provisioning process task Adapter), API Source: JavaTaskJar:cpsgUnix.jar
Application API: com.cpsg_inc.oim.unix.SSHCommandExecutor
Constructors: 0 public com.cpsg_inc.oim.unix.SSHCommandExecutor()
Methods: 9 public void com.thortech.xl.integration.tenetssh.helper.SSHPrvosioning.SSHInit(...)
xxxxxxxxxxxx
Then I made sure the jar file named cpsgUnix.jar is present in the OIM_HOME/JavaTasks directory.
But still I have the error.
What am I missing?
thanks
KhanhThanks everyone for your input.
I added the sshfactory.jar file in the JavaTask folder and it worked.
Thanks again.
Khanh -
"No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b
Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi. -
'Customer Not found' error during inbound delivery
Hi Experts,
During creation of inbound delivery(IBD) with transaction VL31N (against normal PO with doc. type NB), we are getting following error.
Customer not found
Message no. 8B519
Diagnosis
No entry found in KNA1.
Procedure
Please contact your system adiministrator
As per our understanding there should not be any connection for IBD & Customer master. Moreever we are getting this error for Only Brazil Plant. IBD works fine for India & Argentina plants.
Requested to provide any possible clues.
Regards
ManojHi Manoj
This error messag should be realted to the Brazilian localization...
and th e problem reported should be in the table J_1BTVAKV, If you don't need a Nota Fiscal in the step of process, you should not assign the Nota Fiscal type to sales doc type .
Please correct your configuration and perform a new test.
Regards,
Mauro -
"Can't set object server" Error during SLD Initialization
Hi,
During System Installation at SLD configuration, problems occured and
we skipped the step for later execution. After Installation and SPS13
Application, we tried again but the following error occurs.
Can't set object server
com.sap.engine.interfaces.cross.ObjectReferenceImpl incompatible with
com.sap.engine.services.applocking.LogicalLockingFactory
Here I'm attaching the defaulttrace.log section produced during the error
Defaulttrace.log
tion#administrators#SAP-J2EE-Engine#administrators#
#1.#001125BDBC10007600000028001420FA000443E69BC669DF#1200557641853#com.sap.lcr.webui.Admin#sap.com/com.sap.lcr#com.sap.lcr.webui.Admin#Administrator#6330##bporprod_BPP_1663750#Administrator#22947de0c4d411dccb66001125bdbc10#SAPEngine_Application_Thread[impl:3]_13##0#0#Error#1#/Applications/SLD#Plain###Can't set object server#
#1.#001125BDBC10007600000029001420FA000443E69BC66ACD#1200557641853#com.sap.lcr.webui.Admin#sap.com/com.sap.lcr#com.sap.lcr.webui.Admin#Administrator#6330##bporprod_BPP_1663750#Administrator#22947de0c4d411dccb66001125bdbc10#SAPEngine_Application_Thread[impl:3]_13##0#0#Error##Plain###Thrown:
java.lang.ClassCastException: com.sap.engine.interfaces.cross.ObjectReferenceImpl incompatible with com.sap.engine.services.applocking.LogicalLockingFactory
at com.sap.rprof.dbprofiles.JDBCProfileLock.<init>(JDBCProfileLock.java:52)
at com.sap.rprof.dbprofiles.JDBCProfileFactory.newProfileLock(JDBCProfileFactory.java:41)
at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactoryForUpdate(RemoteProfile.java:230)
at com.sap.lcr.start.EnvManager.getWriteableEnv(EnvManager.java:512)
at com.sap.lcr.webui.Admin.actionInitialSetup(Admin.java:877)
at com.sap.lcr.webui.Admin.doGet(Admin.java:231)
at com.sap.lcr.webui.Admin.doPost(Admin.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.#001125BDBC10005F000092B3001420FA000443E69BE47659#1200557643822#com.sap.engine.services.security.roles.SecurityRoleImpl#sap.com/irj#com.sap.engine.services.security.roles.SecurityRoleImpl#Guest#6332####6047b4f0c44211dc8975001125bdbc10#Thread[Thread-53,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/System/Security/Audit/J2EE#Java###: Authorization check for caller assignment to J2EE security role [ : ].#3#ACCESS.ERROR#SAP-J2EE-Engine#administrators#
does anyone faced the problem, and please a solution purpose
regardsdefo an autorisation issue
#1.#001125BDBC10005F000092B3001420FA000443E69BE47659#1200557643822#com.sap.engine.services.security.roles.SecurityRoleImpl#sap.com/irj#com.sap.engine.services.security.roles.SecurityRoleImpl#Guest#6332####6047b4f0c44211dc8975001125bdbc10#Thread[Thread-53,5,SAPEngine_Application_Threadimpl:3]_Group##0#0#Error#1#/System/Security/Audit/J2EE#Java###: Authorization check for caller assignment to J2EE security role : .#3#ACCESS.ERROR#SAP-J2EE-Engine#administrators#
Where you assign the role depends on how you have setup your ume configuration - to the ABAP stack or have it managed in the Java stack
If its just a java stack configuration for user management page of the java stack
http://<servername>:50000/useradmin and give the user as many roles and permissions from there
otherwise its PFCG in the abap stack of your system -
Urgent: ORA-01403: no data found Error during Order Import
Hi Experts,
I 'am performing order import by populating the order interface tables and then running the order import concurrent program. I 'am encountering the following error while running the order import program:
No. of orders failed: 1
"*ora-01403: no data found in package oe_order_pvt procedure lines*"
Can anyone please provide some pointers on why this is occurring and how this can be overcome. Any pointers on this will be immensely helpful.
Thanks,
GanapathiHi Nagamohan,
Thanks for your response. I tried calling mo_global.set_policy_context('S', <org_id>) before invoking the concurrent program using fnd_request.submit_request(...); But, this still does n't seem to prevent the No data found issue.
One more thing that I noticed is, this is happening while importing the customer along with the order. I 've ensured that I use the same org_id for the customer data as well. Can you please let me know whether there is anything else that I should check for.
Thanks,
Ganapathi -
Error during sending IDoc from XI to R/3
Hi,
I get following error (transaction: sxmb_moni), when I try to send a IDoc from XI to R/3.
Error: Transaction IDX1: Port SAPI14_921, client , RFC destination contain errors.
When I go to transaction sm 59 and start this rfc-destination so it works fine.
Can anybody help me please?
Thanks.
Regards
StefanHi,
I dont now how you pushed the IDOC form R/3 to XI..
Follow this particular way ....
Go to WE19 and execute the IDOC which you want to send and clicl the tab startoutboundprocessing....
then it hits the XI after couple of minutes and then
Go to the XI in that IDX5 where you can see the IDOC messages....
Amaresh
Maybe you are looking for
-
How many users do I get as a photographer?
I wonder if anyone can answer this. I need to buy the PS and Lightroom, and wondered if the fee includes use on both my laptop and my desktop. Thanks for help Byron
-
Raw Files from LR do not open automatically in Photoshop raw processor
I like to edit my images in Photoshop. Could you please advise why after I upload raw files into LR and using photoshop as external editor, the file opens but not in the PS (photoshop) raw processor. I have to work around this by first finding the im
-
OBIEE 11g - change bar graph result to "rectangle" instead of "gradient"
Hi, I'm a big believe in Stephen Few's theory that anything that adds extra ink and/or causes visual distraction is poor design for presenting information. I've already figured out how to remove the shadow effect from all graphs (by setting visualEff
-
Dashcode widget info button with eBooks Author on iPad
I've created a simple widget using Dashcode. The widget work fine, both in Dashboard and in an eBook I created with iBooks Author, except for the standard info button. When I deploy the widget to my Dashboard, the info button works just fine, flips t
-
Is there a way to delete songs from an ipod without having to connect to iTunes?
is there a way to delete songs from an ipod without having to connect to iTunes?