No option for Airplay OSX 10.9.2

I have no way to play itunes or other media through airplay to apple tv or airplay enabled Bose speaker

http://support.apple.com/kb/HT5922
Is this icon not in iTunes?

Similar Messages

  • How do I use my iPad with Retina Display model MD514LL/A with apple tv? I see no option for airplay and I have the latest update.

    I am having trouble mirroring my ipad with my new apple tv. I don't see any options for airplay. Any suggestions would be greatly appreciated. Thanks!

    Is your apple tv also up to date?
    Are they both on the wireless network, or is the apple tv using an ethernet cable?
    Reboot your wireless router, your apple tv, and your ipad, in that order.

  • No option for "Airplay" in "Display setting on MacBook Pro; Where else is this option?

    Trying to mirror MacBook Pro to Apply TV. Under "Display" settings there is no option for "Airplay". Even after a software update, such option was not visible. Where else can I find an Airplay option on my Mac OS X version 10.7.5.
    - I set up Apply TV with my iPhone and I had no problems
    - I already turned on "Airplay" settings on Apple TV
    - However I am unable to find the "Airplay" option on my MacBook Pro
         - I opened up my "System Preferences"
         - Clicked on "Display"
              * On and Off "Airplay" option is nowhere to be found.

    Hey JenLeb16,
    I am not sure what version of MacBook Pro you are running, but as long as you have a MacBook Pro that is an early 2011 as well as running OS X Mountain Lion (10.8) then you should be able to do that. Take a look at the article below for more information. 
    About AirPlay Mirroring in OS X
    http://support.apple.com/en-us/HT201343
    Take care,
    -Norm G. 

  • IPhone 5 with iOS 8.0.2 no option for AirPlay

    I have an airport express that has worked flawlessly, and continues to work with our 2013 macbook pro and iPhone 4S 7.1.2.  My iPhone 5 with 8.0.2 doesn't give my the option for airplay anymore, only airdrop.  The phone does connect to the airport express and can connect to the internet.

    I had the same problem. Didn't notice until days after updating to iOS 8.0.2. I tried to forget my wifi network and reconnect to my network. That didn't help. I then "rebooted" my iPhone 5 by pressing and holding the sleep and home buttons and released as soon as the phone powered down. I left the phone off for about a minute then powered it back on. AirPlay is now working.

  • Cant't find 32-bit option for Mac OSx

    I'm running PSD 5 on OSx 10.7. I'm trying to edit a photo and when I try to find the 32-bit option, it's not there. I went to the finder in the Photoshop application for the box to check off 32-bit and it wasn't there. Do I need a specific plugin for this purpose?

    If you click the Photoshop CS5 application icon in the Finder and Get Info you will be able to select  Open in 32-Bit Mode.
    If you're not seeing the above you are probably selecting the FOLDER, you need to select the application itself.

  • HT4437 hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    See
    http://support.apple.com/kb/TS4215

  • How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store.

    How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store. 

    Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).

  • I am trying to purchase Creative Suite CS6 Design Standard. I own a Max OSX. I live in Germany.  When I try to order for Germany, it gives me only an option for Windows, not Mac.  How can I order?

    I am trying to purchase Creative Suite CS6 Design Standard. I own a Max OSX. I live in Germany.  When I try to order for Germany, it gives me only an option for Windows, not Mac.  How can I order?

    In Germany no telephone number nor web chat is available.  Searching on the Adobe site tells me that this forum is the only avialable means to ask consumer questions.  I am giving up and ordering from elsewhere.

  • HP-photosmart 6280 all-in-one with osx 10.9 now does not show options for printing photos from the photo tray.

    Using osx mavericks on macbook pro.  My printer for HP-photosmart 6280 all-in-one now does not show options for printing photos from the photo tray.

    What router? Have you restarted the router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have an iMac G5 running OSX Leopard 10.5.6, how do I activate the external microphone port? In the Sound  window there is no option for the external port.

    I have an iMac G5 OS 10.5.6. How do I activate the external microphone port? In gen. pref. 'sound' there is no option for the external port.

    Your audio settings may have been changed.
    Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
    Change the Audio Output setting to 44100.0 Hz.
    Quit Audio MIDI Setup.
    More info here on no sound from built-in speakers:
    http://support.apple.com/kb/TS1574?viewlocale=en_US
    Any reason why you have not updated to the final verion of Leopard 10.5.8?

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • Why no RAID options for new disks?

    Hi support group,
    "My name is Shaun, and I am a mac-aholic"
    I inserted 4 new 3TB disks into the bays of my Mac Pro (2012), and there is no RAID option for them.
    How I got here:
    Inserted the WD Red drives, and they were not initiated.
    I "erased" the drives, gave them names, and they appear in Disk Utility in grey drives. 
    Went to set up the RAID, and move the drives into the RAID, but got an error that they could not be used.
    It appears to me that disk utility is not allowing me to fully use those drives. I Have created RAID drives before with no issue in RAID1 with 3TB drives before on this machine. Am perplexed, I thought this to be the easy and simple part of my upgrade odyssey! Did I screw up the initialization? On all FOUR drives?
    Now, if I click on the drives, the RAID option does not present itself.
    FWIW, I am using OS X 10.9.5, on Mac Pro 5,1. I boot from PCIe card. My end goal is to create a 4-disk RAID 10 using the four SATA connections on the MP.

    It was really pretty simple based on your feedback, I powered down, removed the drives from the SATA backplane, moved each drive separately to the USB enclosure, then re-"erased" in OSX-Etended.  I ejected each drive when finished, and moved to the next one until all four were re-"erased".  Then I restarted the Mac with all four in the SATA connections, and all four were visible and had the RAID option tab.  I created the three RAID schemes (two stripe and one mirror), and dragged the drives into the RAID option.  Then I hit "create" or some other command to finish the RAID.
    Note that I did get an error on the RAID creation.  From memory, this was "cannot create RAID without an unmounted disk" or something like that.  I cleared the error, and then opened back up Disk Utility.  All the RAIDs were listed, and were operational with the green "On" signal.  I could read/write/transfer from the RAID.  Once I transfer the data to this RAID, I will work on a way to test it, but if any risk to the data, I might just leave well enough alone.
    For now, it seems I have a fully functional RAID 1+0 using the four HDD on the SATA connections in my Mac Pro 5,1.

  • How to install english language adobe Photoshop CS4 for Mac OSX 10.7.5 ?

    Hello,
    I am in Germany and need to switch Photoshop to English.
    The option is not available in the language preferences (attached screenshot)
    I could only find an update for Mac OSX 10.4, but not 10.7?
    Please help!
    Thanks in advance!

    Languages are serial number specific. You cannot change them on the fly. If your serial number supports it, you would have to install it in English. anything beyond that is a hack like stripping the localization files from the app package...
    Mylenium

  • HT204291 I have downloaded the new Lion OS X but the AirPlay icon wont appear in my menu bar.  The option of AirPlay mirroring is turned on in the Display settings. No issues Air playing through iTunes. Need help. Thanks

    I have downloaded the new Lion OS X but the AirPlay icon wont appear in my menu bar.  The option of AirPlay mirroring is turned on in the Display settings. No issues Air playing through iTunes. Need help. Thanks

    AirPlay
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay

  • Defect in Acrobat XI for mac osx

    Using Acrobat XI for mac osx
    I opened a bank statement pdf.
    I redacted the account numbers. It gave me option to remove hidden metadata. I removed the hidden metadata.
    I saved the document and it removed character "I" from many places in the document.

    Hey,
    You might try combining the PDF files using 'Create> PDF Portfolio' option and let me know if it works or not.
    Please let me know.
    Regards,
    Anubha

Maybe you are looking for

  • .jar files with javadoc

    Can I supply a .jar file on the -classpath and have javadoc parse it. I have a file that is referencing an annotation in a third-party package. So, I'm getting exceptions running javadoc. I'm trying to supply the .jar file in the -classpath but javad

  • Oracle XE License

    Oracle states XE is free to deploy & distribute. Now supose I have a client server application, that uses oracle 8i personal edition, and I'm being charged for that. Would replacing that database with XE mean that I will no longer be charged? TIA JM

  • How can I setup auto bcc function based on the sender email address or name in iplant 5.1 and netscape 4.15 sp7 ?

    I am using netscape 4.15 sp7 on linux and iplanet 5.1 on solaris 8 .. I want to setup a filter or something in the server so that when users sent out email. the server will automatically bcc one copy to one particlar account.

  • Aggregation based on dimension

    Hi all, Can anyone help me in knowing the difference between normal aggregation set for a measure irrespective of dimensions and different aggregations set for the same measure based on dimension...

  • Lightbox problem on live site

    Hi, I have created a website featuring a lightbox on several pages.  This works fine when I preview them, but isn't working on the live website - can anyone help? here's the link to a temporary page: http://www.vdubbers.co.uk/hoodies.html Thanks.