No print showing 2050

I have a HP Deskjet 2050 All-in-One Printer
Up until about half an hour ago my printer was working perfectly. Then I had a paper jam..
I removed the paper by pulling it back out through the input tray the paper appears to be in one piece.
Now when I try to print the printer will go through all of the motions of printing and make all of the sounds but no ink appears on the paper.
I have followed all of the instructions on the Fixing a Paper Jam - HP Deskjet 2050 All-in-One Printer - J510a video and still get a blank page when I press the black and colour copy buttons simultaneously.
I have also down loaded the HP printer diagnostic tool and it couldnt find anything wrong. I managed to print in light blue 'Test Print from HP Print Dia'
any ideas ??

Hi - The first thing I'd do is check the ink level for the black cartridge. I realize it was printing fine before, but typically when it is going through the motions and shooting out a blank sheet of paper, it is a result of being out of ink.
If the ink level shows that the black cartridge is fine, try following the steps in this document, specifically to clean the cartridge.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Similar Messages

HP 5530 wireless printer shows offline but it is turned on, I use a router

My printer shows to be offline, sometimes it prints pages at random, which I have no idea why or what they are about, kinda scary, It is turned on and the wirelss light is not blinking, but shows offline when i try to prine from my laptop.Its a HP 5530 all in one,windows 8

Hello @tiogalady,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the 'offline' issues that you're experiencing when trying to print from your Windows 8 computer to your wirelessly connected HP ENVY 5530 e-All-in-One Printer. Now, recently Microsoft has released a Hotfix for the Windows 8 and Windows 8.1 Operating Systems to 'fix' offline printing issues as Microsoft recognizes this as an issue with their latest Operating System. Therefore, to start, I am going to have you run the Hotfix to see if this resolves the printing issues.
Can I please have you click here to access the Hotfix page. Once the website opens select the 'Hotfix Download Available' button. Allow the Hotfix to run. Please follow any onscreen steps to install the Hotfix.
Once the fix has completed, please test printing again. Should the Offline issue persist there is an additional driver fix that I may need to walk you through. Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Multiple copies of the same printer showing up in the print pull down menu...

Hi... I just recently installed an Epson XP-410 wireless printer so that we could print from our iPads and iPhones. I don't know if this is the correct forum to ask the question(s) in or not, but here goes...
1. There are multiple copies of the printer showing up in the drop down print menu when I go to select the printer. How do I know which is the correct printer to choose, or does it matter?
2. Can I get rid of the un-needed multiples? If so, how?
3. Also, I have been having an issue with printing to it when I switch between programs. When I tried printing to it from a simple text editor, it came up and said that there was a communications issue. I used to have a Brother network printer connected via Ethernet, and had no issues printing from any of my computers, but I couldn't print from the iPad with the Brother. So, we bought the Epson. Anyway, I had to restart the computer to re-establish the link between my computer and the printer. Didn't think I should have to do this since it is a network (wireless) printer. Any thoughts on that?
For a little more information, our main computer is an iMac (20-inch) running OS 10.7.
Thank you,
Jim

Have you tried to force quit iBooks?
Double tap the home button. You'll see the app icons adn a preview show up on the screen. Scroll sideways if needed to get the preview and icon for iBooks on the screen. Flick the preview window up and off the screen. Then single tap on the home page preview, or on the home button to exit the mode then try to open iBooks again

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

How do I install a wireless printer on my iMac. No available printer shows up.

How do I Install sprinter on my iMac? No available printer shows up when I go to the Printer and Scanner icon.

Usually, the printer manual tells you how to sync your printer. If not, look through the settings on your printer and find a panel that might help.

My printer shows it is offline. How do i get this to go online? It is connected to a wired network

my printer shows it is offline. How do i get this to go online? It is connected to a wired network I have run all of the diagnostics from hp's website and everything passes. It will print the test pages from the tests but nothing else. when i do a windows trouble shoot it says turn printer on but its already is on. It can see it on the network but cant connect for some reason.

i run test on printer it tells me it is offline so wont print anything from cmputer

Pc will not id printer shows offline

pc will not transmit to printer shows off line have replaced printer cord
This question was solved.
View Solution.

problem solved thks

Printer shows paper jamming in output bin but no paper visible in 2605dn

printer shows paper jam in output bin---have reset and cleared everything---still shows same. What now?

In case you missed something, see this:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00783950
Try a NVRAM reset: (but make sure u save your n/w config 1st)
1. power off the printer
2. holding down the select and cancel buttons and powering on
3. release buttons when display reads "permanent storage init"
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Printer shows wrong cartidge for my hp allin one

Printer shows wrong cartidge for my hp allin one printer.It was working 4 /5 days ago?if noone can help me is there a toll free number i canc all hp without having to pay for it,I posred this 4 times now and nobody has helped me,,,,,,,,I have windows vista and a DX series gateway computer about 7 nonths old now...Well i cant do anything with my printer now??????????

call 1-800-474-6836.

Printer shows up multiple times in my device list

I have an EA4500 router running firmware version 2.1.39.145204. A device, which I assume is my HP printer, shows up on my device list multiple times (11). This is illustrated below with the devices status report from the "Troubleshooting" tab of my Smart Wi-Fi interface. The device listed as "Photosmart Premium C309g-m" is indeed my printer. The MAC address listed agrees with the set-up information in my printer and it is correctly listed as connected via wi-fi. There is no hard wire connection from the printer to the network.. As you can see, there is a bunch of other devices listed all with the same name. These devices have the same IP address as my printer but different MAC addresses. My questions are:
1. What causes this situation?
2. How do I fix it? By this I mean, how do I remove the multiple listings?
Thank you in advance for your help.
Name MAC address IPv4 address Connection
PKs-iPad
FC:25:3F:9B:5B:66
192.168.1.118
Wireless
HP0026550FA2B0
DC:E0:00:00:B8:C5
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:000:20
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:10:9F
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:109
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:38:A5
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:20:74
192.168.1.128
LAN
Owner-PC
00:23:08:CC:F6:00
192.168.1.130
LAN
PETER-LAPTOP-WiFi
00:1D9:68:F2:E0
192.168.1.122
Wireless
David Cohen’s MacBook Pro
00:23:6C:92:CE:22
192.168.1.104
Wireless
Photosmart Premium C309g-m
00:26:55:0F:A2:B0
192.168.1.128
Wireless
HP0026550FA2B0
DC:E0:00:00:20:AA
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:000:B4
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:98:81
192.168.1.128
LAN
HP0026550FA2B0
DC:E0:00:00:18:A9
192.168.1.128
LAN
Name MAC address IPv6 address Connection

Hi sgtpepperlhcb2! Duplicate MAC and IP addresses in the DHCP list can be an indication of a possible firmware problem. I suggest you upgrade the router's firmware. Reset and reconfigure the router if the firmware upgrade will not work.
Here's an article that may help.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d2d5c9da8e68439883b85a9cf72bf7e5_How_to_upgrade_th...

Pcs 1610 all in one stops printing in middle of web page prints shows error-reset on q.

when i try to print coupons and other web page prints printing starts then stops in the middle of page the read out on the printer shows printing when i try to either turn off or cancel print out on the printer nothing happens i can only unplug printer to get it to release. also must cancel document in q. to remove problem. paid iyogi big bucks they say it must be hardware, and of course it is long out of warranty. XP system

I'm having trouble finding a product for the HP 4550 all-in-one. I can find an HP 4550 laserjet and an HP Photosmart c4500 series printers. Can you provide more detail about the product?
Looking at your post and the fact that the shadow appeared after you replaced the black cartridge, I wonder if this is caused because your cartridges aren't aligned. If your product has a LCD screen, look for an option to align your cartridges - likely under 'tools' or something like that in the menu. Try aligning the cartridges and see if that helps.
If you can provide some more details about your product, I could point you to more detailed alignment steps.
I am an HP employee.

Why do my print jobs keep cancelling? Internet is connected. On ePrint centre printer shows read

Why do my print jobs keep cancelling? Internet is connected. On ePrint centre printer shows read ??

Hi jmarc11,
Welcome to the HP Support forums. I understand that when you send a print job to your HP printer via ePrint that it cancels the print job.
To better assist you, would you please provide some further information:
1)    What make/model/product number of HP printer do you have?
2)    How is the printer connected (USB cable, ethernet or wireless)?
3)    Are you sending the print job from your computer or a mobile device? If you are using a mobile device are you using an app like the HP ePrint app or HP AiO app?
4)    What is the operating system of the device you are using to send the print job?
Thank you.
Guide to finding your product number
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

My HP 4480 printer shows up on my MacAir but won't print.

My HP 4480 printer shows up on my MacAir but won't print. It is connected by a usb cable. I have tried powering off and on the printer to no avail! I have installed the latest driver for Apple Mac as well. Thanks for any suggestions!

Hi timetogo,
If you are having an issue with printing from your MacBook Air I would suggest that you troubleshoot using the steps in this article -
Troubleshooting printer issues in OS X - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

CP1525NW connected to wireless network. Running W7 64 bit. Printer shows offline constantly.

I have a desktop and laptop configured with W7 64 bit. On laptop printer works fine, on desktop printer shows offline constantly and the only way to get it running again is by uninstalling the software and reinstalling. I have gone online and downloaded the drivers for 64 bit but I keep getting messages indicating the HP (xxxxx) program 32 bit has stopped working. Not getting this on laptop. They are connected to the same wireless network. Help? - Thanks

Let's try to get the printer back to 192.168.0.103.
Browse to the printer's web page again.
Select Networking, then Wireless.
Select IPv4 Configuration.
Select Manual IP Address
Enter 192.168.0.103 for the Manual IP Address
Enter 255.255.255.0 for the Subnet Mask
Enter 192.168.0.1 for the Gateway
Press Apply.
Now turn off your computer and printer.
Turn on the printer and wait a minute. Print the network configuration page and verify that the IP address show is 192.168.0.103
Turn on the computer. Verify that you can browse to the printer's web page and that you can surf the internet.
Try printing
BTW -- what model wireless-router do you have?
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Shared HP printer shows up twice - wierd

Not sure if this is a Leopard or a Tiger question but I have an HP CP1700 printer attached via USB to an Intel iMac/Os 10.5.1 and I have set it to share. When I open Print & Fax on my TiBook/Os 10.4.11 which s ethernet connected, via a router, to the iMac, the printer shows up twice in the menu with checkmarks beside each. The first one is in bold text but greyed out; wierdly, its location is listed as "Directly attached via USB" - although it has never been attached to this computer (nor has any other printer). The second one has its location as MyName's Computer - which I assume is the shared printer although both computers have the same name! Adding to my confusion, I have to confirm in a dropdown menu the selected printer in the Print dialog and both printers are listed in this menu without a clue as to which is which. To make matters worse, when I eventually try to print something, neither option gives me a full complement of print options - the critical Paper type/quality page is missing so I can't specify which pages to print or whether to print in colour or greyscale.
Anyone else seen this and cured it? TIA.
Simon

you dont mention the model because airprint is a feature a printer have to support before you can print to it from ios devices
if it don't support airprint you can download a hp printing app from app store

No print showing 2050

Similar Messages

Maybe you are looking for