No records in delta queue for 0CRM_SALES_ACT_1 & 0CRM_COMPLAINTS_I

Hi all,
we are linking a SAP CRM system 4.0 (patch level 10) with BW 7.0. We have initialized the delta extraction and everything was fine. Data was extracted and we can see the delta queue in RSA7 but no records are added. Users are creating new activities and nothing appears in the delta queue. We have other extractors delta capable which are working fine.
The main difference is that these two extractors have been enhanced using the Badi CRM_BWA_MFLOW. When we check the extractor using transaction RSA6, records include the information we add in the Badi.
We think the problem is in CRM because, it does not collect any delta data (queue is always empty). BW is capable to extract when initilitialization. We have tried the early delta initialization and the simple delta initialization.
Any help will be appreciated.
Thank you in advance.
As an extension: we can't see the extractors in the qRFC monitor (trans. SMQ1). We can see there the ones which are working...

Hi again,
we finally solved the problem. The thing was that no BDOCS with type BUS_TRANS_MSG were not being generated when creating or modifying CRM activities. Theses datasources need the BDOCS to work. Transaction SMW3_00 had the flag "Do Not Send" set. We unmarked it and everything seems to work now.

Similar Messages

Zero records in Delta Queue for Non-LO Datasource

Hi,
I have a process chain which loads data daily and last loaded on 5th of this month which is a delta load to DSO, and then I have triggered process chain on 10th and now the process chain got successful but delta is returning zero records. I have gone through the Delta queue monitor, in that the data source is showing 0. what could be the reason for this? The data source is a Generic data source built on View and it is not a LO data source and delta is on timestamp.
Thanks,
Karan.

Hi lokesh.
Repair Full delta option it wont distub existing deltas.....
repair full delta put full update indicate request as repair request.
Via the Scheduler menu we can indicate a request with full-update mode as Repair Full Request. This request can be updated into every data target even if the data target already contains data from an initialization run or delta for this Data Source/ source system combination, and has overlapping selection criteria.

Number of records in Delta Queue in table level.

Hi All,
I want to know the number of records in Delta Queue for a particular database in Table level. Right now in Production, i dont have access to TCODE RSA7. I just trying to check the Table TRFCQOUT but i am unable to see the exact count of records specific to data source. Can you please provide any other table to see the data and the count of records in delta queue specific to each data source.
Thanks.

Hi Jalina,
Check the follwing tables:
-ARFCDATA
-TRFCQOUT
-ARFCSTATE
In case you can't find what you need in the above tables. You can always ask a temporary access to RSA7 transcation to your basis team or ask them to give you the required information from RSA7 themseleves (of course provide to them a step by step procedure) .
Hope it helps.
Amine

Writing to FI-GL records to Delta Queue using a Function Module

Has anyone of you tried to write FI-GL transactions to delta queue using BTE by configuring a function module. I am trying to achieve it for a datasource based on a view on FAGLFLEXA table (GL Line Items). For some reason I am not able to see records in Delta Queue. I am doing this to achieve RDA functionality. If you have done it please sends me step sequence and the name of FM.
Your help would be highly appreciable.
Regards,
Ram

Hello Ram,
See this SAP Network Blog: [Generic Extraction via Function Module|/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module]
Have a look at these docs,
[How to Create Generic Data Sources which use the Delta Queue (NW7.0)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b68b99-022e-2a10-999d-c4dc9ec24a59]
[How to Create Generic DataSources Which Use the Delta Queue (NW2004)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf]
[How to Create Generic Delta|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
Thanks
Chandran

Is there any solution to Delete Single Record in Delta Queue 2LIS_08TRFKZ

Hi,
Is there any solution to Delete the Single Record in Delta Queue at R/3 -(RSA7) for Datasoure 2LIS_08TRFKZ
A wrong posting has been posted at R/3, its has been deleted once they came to know its wrong at R/3.
Now the Problem is wrong data has come into Delta Queue RSA7.
We are unable to extract the data in BW. Its not even coming till PSA also so that we can delete at PSA itself that particular record.
Is there any solution to delete the Single Record in Delta Queue at R/3 -RSA
Thanks & Regards
Ashfaq

>
Ashfaq Shaik wrote:
>
> Record 166 :Contents <000000000.00000000 from field ZZVOLUME cannot be converted in type DEC RSAR 197
Sorry I didnot see this error before.
I guess you didnot try error handling hence you get this error BW side.Try error handling first.
If this doesn't work then you can go with above method.

Delta package not fetching all records from Delta queue in r/3

Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.

Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards.

Critical issue - delta queues for LIS empty after upgrade BW3.5

The delta queue in R/3 for LIS sources (S260-261-262) remains empty,
even after a successful init delta. Hence I cannot extract delta
records.
BW3.5
PI2004.1
Does the BW upgrade has an effet on the delta queue management in R/3 ?
The previous configuration BW2.0B PI2004.1 did work fine in that
respect.
Laurent Querella
BI Consultant ALTI

Laurent,
from OSS Note 534296 'LBW0: DataSource generation possible for SAP info str.' you can read:
"(...)it is no longer possible to generate DataSources for info structures (transfer) Snn delivered by SAP (where nnn is between 001 and 500) in the BW interface for LIS info structures (TR: LBW0) in the OLTP. (...)The corresponding DataSources are delivered with the Business Content."
I think this is the issue...
However, are you saying that all infostructures are empty ?
And from where your init is taking data ?
After an init your delta tables have to be empty...did you empty all these tables before doing your upgrade ?
Bye,
Roberto

No records - FM Delta queue

Hi,
I did setup all steps for 0PU_IS_PS_44 data extraction from R/3. In doing so I did Initialized Delta process, logged to R/3 RSA7 transaction code to check the queue. At the time of Init I got 300 records. Today I created new Info package to extract the Delta records.
Here my problem is I could not see any Delta extraction to BW. In R/3 I could not see any records in the queue but where as in the RSA3 (Extract checker) the number of records are 324 meaning (324-300) 24 records were created from I did the Init and expected that records to appear in Delta Queue and also while Delta extraction to BW.
Appreciate if one could help me any steps I am missing out or any suggestions to see additional records to extract via Delta.
Thanks in advance.
Best Regards,
Murphy.

Hi Bhanu,
Thanks for your response at both places.
I got resolved the FM data source delta extraction. Adam responded to my post stating the IMG setting required for the activating Delta Queue.
I have the same issues with CO and FI data sources. Even the GL Account master data data source does not show the new/changed records/documents at Delta queue.
Appreciate if you could help me in resolving the problem.
Thanks.
Murphy.

Generic delta queue for CDHDR

Hi,
Has anyone used the function module to create a generic delta queue to work for extracting data from tables CDHDR and CDPOS when using the UDATE as the change date? I was able to find an alternate solution to extracting the data from these tables, but the solution is not approved, and it is suggested to use the function module and use a changed date to create the generic delta queue from RSO2.
Please advise.
Thank you

Hi Siggi,
Thank you for your insight on this. Well, UDATE is the changed date in the table CDHDR, and I am wondering if that should be used to provide to the RSO2 setup and set the interval to 1 day. I am extracting this UDATE to my extract structure.
Here is what I have in the FM and I am loading right now. I provided the date range to the 'Data Selection' tab for a complete year, which should only be 100K records but it is now extracting up to 17M records and still going. I am not sure if I should stop the load because it seems that it is loading the complete table CDHDR which is 80M.
Here is my code form my FM:
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'UDATE'.
        MOVE-CORRESPONDING L_S_SELECT TO L_R_UDATE.
        APPEND L_R_UDATE.
      ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      OPEN CURSOR WITH HOLD S_CURSOR FOR
     SELECT (S_S_IF-T_FIELDS) FROM CDHDR
                              WHERE UDATE IN L_R_UDATE
                              AND   OBJECTCLAS ='ORDERBUCH'.
SELECT OBJECTID CHANGENR USERNAME UDATE UTIME OBJECTCLAS TCODE
         FROM CDHDR
      WHERE UDATE IN L_R_UDATE
      AND   OBJECTCLAS ='ORDERBUCH'.
I have the other SELECT commented out because I was getting an error dump on the R3 side saying "One of the field names in the SELECT clause was not recognized.", referring to statement "OPEN CURSOR WITH HOLD S_CURSOR FOR", so I am using the other SELECT that is not commented out.
I think I am following what you are referring to about the SELECT but not quite completely. What would you suggest to rewrite for the UDATE issue to process both the Full and Delta data?
Thank you

How to delete the data in update queue and delta queue for Queued delta?

Dear BWers,
How do i delete the delta queue and update queue data before i fill the setup tables for a extraction based on Queued delta. Please help.
Thanks
Raj

Hi Raj,
I think you need some ground work for the LO extraction same as others here. Please read the 3 blogs expliciltly created for LIS by Robert Negro.
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
As well, the OSS 380078 would clear your doubts reagrding the the BW QUEUE mainatinance.
Please let me know if these material has been suffecient enough.
regarda,
raj

How to flush Delta queue for future SAP upgrades/support pack !

Guys,
I'm making documentation regards to " How to flush Delta Queues" in case SAP wanted to upgrade the system or any support pack. Please anyone let me know the effective way to flush out the delta queue in step by step methods. I really appreciate your help.

1. Run V3 for associated application(s), this will load any potential delta data to the delta queues.
2. Run the delta load for each datasource twice. The second load will clear the delta repeat data so that there should not be any more data in the delta queues defined with the format of the current datasources.
Does this help?

0CRM_SALES_ACT_1 Delta Queue Issue

Hi,
I need to work with the delta queue for 0CRM_SALES_ACT_1 extractor.
I ran the init process with data succesfuly and I can see the the extractor "green" in TC RSA7
I checked if the BW Adapter is active in TC GNRWB and the BWA_DELTA3, BWA_FILL, BWA_QUEUE AND BWA_REL_CHECK are active (with x)
What do I miss..? No Delta in the Queue
My working environment:
CRM : 5 BBPCRM 500 level 11 SAPKU50011 & SAP_BW BI 7.0 700 level 0015 SAPKW70015.
BW : SAP_BW BI 7.0 700 level 0016 SAPKW70016.
for your advice
Eyal

Hi Eyal & Ben:
Can you please check in CRM,with transaction code SMW01 and execute with no limitation in 'Send Data and Time' as well as 'Update Date and Time". Now check is there any yellow 'State" and if you found any yellow state, delta is not process and you have to process Queue name. I faced this before.
Regards,
Md

Issue in loading XML data in BW delta queue

Hello All,
My requirement is to stage small amount of XML data in SAP BW. For doing so, i have followed below steps...
1. Create File data source
2. Define Myself data source using file data source with Function module
3. Initialize load process without no data transfer
4. Using SOAP RFC service, Load xml records in delta queue.
Now in step number 4, i am unable to open the SOAP RFC service using which we can select the xml file.
Any help in this regard will be highly appriciated.
Thanks
Ketan

SOAP/RFC service is already activated. Only problem i am facing is as below.......
1. Created HTML page by copying html snipest
2. On created HTML page, select XML file as an input and URL of SOAP service which is pointing out to the application server
3. When i press "Send recordset" button, HTML page throws "Java script" error and data is not being pushed to BW delta queue....
Please share your ideas to resolve this issue.
Thanks in advance,
Ketan

DUMMY_BW (0FI_GL_04) delta queue not getting cleared

Hi,
We're using minute based extraction approach for 0FI_GL_04 and thereby have two delta queues for the 0FI_GL_4 extractor in the SAP ERP ECC system: One for the ‘DUMMY_BW’ and the other for the 'real' BI system. The delta queue for DUMMY_BW is not getting cleared automatically in production system and it keeps on adding more records in the queue which is in turn consuming memory in ARFCSDATA. Any thoughts on this would be really helpful.
Regards,
Karthik

Hi Gurus,
Please help me on how can I check that on what fields 0FI_GL_20 is pulling delta.
I tried to find the MSG Type to check in BD52 for relevant field list, in ROOSGEN table. the entry for MSG type is blank there.
Any help on this is appreciated.
Thanks,
Sourabh Deo

Error in loading XML data in BW delta queue

Hi All
My requirement is to stage small amount of XML data in SAP BW 3.5. For doing so, i have followed the steps specified in How to send XML data to BW
Link for "How to send XML data to BW"
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21d8aa90-0201-0010-5e83-a3798b9a5ee0
1. Created File data source
2. Defined data source using file data source with Function module
3. Initialize load process without no data transfer
4. Using SOAP RFC service, Load xml records in delta queue.
Now in step number 4, i have created the following
1. Created the html code
2. On created HTML page, select .CSV file as an input and URL of SOAP service which is pointing out to the application server
3. When i press "XML Send recordset" button, HTML page throws "Java script" error and data is not being pushed to BW delta queue
Any help in this regard will be highly appreciated.
Thanks
Yeshwant

Hi All
My requirement is to stage small amount of XML data in SAP BW 3.5. For doing so, i have followed the steps specified in How to send XML data to BW
Link for "How to send XML data to BW"
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21d8aa90-0201-0010-5e83-a3798b9a5ee0
1. Created File data source
2. Defined data source using file data source with Function module
3. Initialize load process without no data transfer
4. Using SOAP RFC service, Load xml records in delta queue.
Now in step number 4, i have created the following
1. Created the html code
2. On created HTML page, select .CSV file as an input and URL of SOAP service which is pointing out to the application server
3. When i press "XML Send recordset" button, HTML page throws "Java script" error and data is not being pushed to BW delta queue
Any help in this regard will be highly appreciated.
Thanks
Yeshwant

No records in delta queue for 0CRM_SALES_ACT_1 & 0CRM_COMPLAINTS_I

Similar Messages

Maybe you are looking for