No RFC destination is defined for SAP Global Trade Services

Hi Team,
I am getting error No RFC destination is defined for SAP Global Trade Services while transferring master data from one ECC Client to GTS.
Both clients has built in GTS. The situation is like this.... Client A which has ECC & GTS and Client B also has ECC and GTS. Client B we are intended
to use only for GTS. This is basically for proto type purpose we need to establish connectivity between A and B. B we intended to use as a feeder system
1) All the three BADI'sin SD0A,SD0B and SD0C level activated
SLL_PI_SD0A_TRANSFER
SLL_PI_SD0B_TRANSFER
SLL_PI_SD0C_TRANSFER
2) /SAPSLL/RFC_DEST Badi also active
I asked BASIS people to check in SM59  Client A is connected with Client B (here Client B as RFC destination) even connection test / remote logon also
tested and it is working between A an B
Where i am missing
Regards,
Ramji

Hi Dave,
Thanks for your reply.Sorry i forgot to include in my points already done.
BD97
BD64
Just to clarify one more point
sender should be EH6CLNT800 (ECC)
Receipient should be EICCLNT800 (GTS). Is it correct
Regards,
Ramji

Similar Messages

  • RFC destination not defined for SAP global trade services

    HI friends,
    I have created a delivery against a sales order. Maintained the storage location and the picking quantity for the item.
    Now trying to post the goods issue but system is giving short dump and error message says:
    "RFC destination is not defined for SAP global trade services"
    We are not using SAP global trade services module and no IDocs are involved in the process.
    Please help
    Thanks in advance
    Veer

    Hi Mohit,
    Thank you for replying.
    It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
    As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
    The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
    Deactivate all the activities.
    Now this issue has been resolved.
    Thank you again for replying.
    Regards
    Veer

  • While creating order and in MB1C, I am getting the error "No RFC destination is defined for SAP Global Trade Services"

    Hi Experts,
    I am getting the above error, while saving the order, and in MB1C. I am trying it in IDES, Even ,while transferring Customer and material, i am getting the same error.I checked feeder, GTS systems logical systems, both the systems are remotely logging on, but still i am getting the issue. Please help me with your suggestions.
    Thnks,
    Koti

    Hi Koti,
    Well, something must have changed, so just follow the same steps as for the original set-up:
    Define & assign Logical System
    Define destination for RFC calls (SM59)
    Assign destination for RFC Method Calls (BD97)
    Define ALE Distribution Model (BD64)
    Test with Function Module /SAPSLL/CD_ALE_RECEIVER_GET_R3
    Regards,
    Dave

  • No rfc destination is defined in SAP Global Trade Services

    when doing MB1C transaction the above mentioned error is displayed(errror: No rfc destination is defined in SAP Global Trade
    Services ).doing MB1C transaction through movement type 561 the system is accepted,but through MT 501 when we are doing
    the process, the system will generate the aove mentioned error.pls give the correct solution.
    regards
    Maran

    Re: Getting dump MESSAGE_TYPE_X while posting in MIGO

  • GTS200 - Configuration of SAP Global Trade Services

    FYI...
    GTS200 schedules are not out yet, they expect to have some in fall 2008.
    http://www.sap.com/usa/services/education/usacourse.epx?context=%5b%5b%7cGTS200%7c%7c1%7c072%7cUS%5d%5d%7c
    The 1-888-777-1727 number is currently taking details of interested people.

    Hi Mohit,
    Thank you for replying.
    It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
    As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
    The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
    Deactivate all the activities.
    Now this issue has been resolved.
    Thank you again for replying.
    Regards
    Veer

  • SMSY entries for GTS (Global Trade Services) system

    We configured RCA for our Solution Manager v7.01 ehp1 sp06. All of our
    systems are showing Change Analysis data except for our GTS system.
    I need to find the proper entries in SMSY and why it is not extacting
    change analysis data. Im suspecting its the product definition for the GTS IN SMSY...
    Our GTP system is GTS 7.0 NW7.0 sp19. I created a product
    This is my current Product Def in SMSY:
    SAP Global Trade Services->GTD (GTS 7.0) , Main Instance = SSLLEG
    SAP Netweaver -> GTD (NW7.0), Main Product=Application server ABAP
    Is this correct? How come I have no data in Change Analysis? Is there any step-by step guide for GTS landscape definition?

    Hi There
    The product listed in this SAP note  1010428   is only supported by the RCA .  If it does fall under that note
    then please refer to this SAP Note  1036695
    Best Regards
    Jai Wardhan

  • Configuration Guide for Global Trade Service Business Package

    Hello,
    Can anyone provide me with the link where I can download the installation/cofiguration guide for the Business Package for Global Trade Service.
    Regards
    Deb

    Hi Deb,
    in SAP Note 963735 you will find a description how to obtain product documentation for GTS.
    <i>You can access the product documentation on SAP Service Marketplace at service.sap.com/swdc -> Download -> SAP Installations and Upgrades -> Entry by Application Group -> SAP Application Components -> SAP Global Trade services (GTS) -> SAP GTS <Release> -> Installation and Upgrade.
    Note that access to the SAP GTS product documentation is subject to a software license audit. You can only follow the listed navigation steps in the path specified above if you have a current license for SAP GTS. If you do not have a product license for SAP GTS Version >3.0, the entry 'SAP Global Trade Services (GTS)' is missing from the link list under SAP Application Components, which prevents you from navigating further if you lack the appropriate authorization. If you have a valid SAP GTS product license, you can access the contents for the release for which you have the license.</i>
    Best regards,
    Martin

  • What is Global trade Service (GTS)?

    All SAP Gurus,
    What is  Global trade Service (GTS)?
    Is it a module in SAP?
    Regards,

    Hi
    SAP Global Trade Services (SAP GTS) automates global trade processes and enables you to manage large numbers of business partners and high volumes of documents, while also helping you to comply with changing legal regulations. It facilitates global trade by providing you with the tools you require to respond to governments modernizing their systems and to customs authorities communicating electronically with businesses.
    SAP GTS also helps you to avoid costly delays in your import and export processes and allows you to respond quickly to global business opportunities, while mitigating financial risks.
    SAP GTS is based on SAP NetWeaver technology and can be connected to both SAP and non-SAP feeder systems.
    Please go through the link for details
    http://help.sap.com/saphelp_gts72/helpdata/en/b1/8dc5c62c885046ab71fdcddc6ad2c2/frameset.htm
    Thanks & Regards
    Kishore

  • No rfc destination defined for global trade services error while doing migo

    Hi all,
    Pls help me in fixing the following error..
    "no rfc destination defined for global trade services" error while doing migo

    i guess you will be getting dumps in the background in ST22. Can you please check this and post the details if there are any dumps?
    Meanwhile, check this note:
    Note 1098491 - MIGO:Termination MESSAGE_TYPE_X with IO 304 (subcontracting)
    Cheers,
    Jazz

  • No defineded RFC destination for global trade service----urgency!!!!

    how can i resolve this problem for [<b>STOP]</b> Message, just on one sever, not connect any other R/3 system, when i execute mb1c,input  a material information, and try to save the input messages , the system pop up the [<b>stop</b>] error:
        <b> no defineded RFC destination for global trade service</b>
    my system enviroment is:
        win2003 server + db2 8.2 + sap ecc5

    Hi,
    When you post an R/3 material document, the processing terminates with a system message indicating that no RFC destination has been maintained for Global Trade Services GTS.
    This system message is unjustified since SAP GTS has not actually been activated.
    This is caused by a program error.
    Please read the notes-825448, and do the necessary corrections.
    Hope this helps you out.
    Rgds,
    Suman

  • Why do we need to define RFC destination and user for material replication

    Dear Experts,
    why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
    regards,
    Ranjan

    Hello,
    As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
    You can refer to note 720819.
    Regards,
    Ricardo

  • No RFC destination is maintained for the port 'SAPERP'

    Hi!
    I am facing with a very strange thing.
    I am implementing a File_to_IDOC scenario.
    Therefore I created in XI system the appropriate Ports in tcode IDX1.
    I use one business system with two clients (SAPERB100 and SAPERB200).
    I defined there of course the appropriate RFC connections (RFC_IDOCERB100 and RFC_IDOCERB200).
    Unfortunately when I go into tcode IDX2 and try to load metadata I get the following error:
    No RFC destination is maintained for the port 'SAPERP'
    Message no. IDOC_METADATA455
    Diagnosis
    No RFC destination has been maintained for logging on to this system for the port SAPERP.
    This means that no structure information can be provided for this port.
    Procedure
    Maintain the required RFC destination for this port.
    Can some one help me to solve this problem?
    Thank you very much!
    regards
    Holger

    HI Holger
    You need to have a RFC destination created for XI server type 3 (ABAP) to push IDOC from ECC. Similarly you need RFC destination in XI towards ECC to load IDOC / RFC metadata.
    Thanks
    Gaurav

  • CIN,Transport mangement , Global Trade service

    Hi ,
    Can any body Pls send The documentation of CIN, Transport management , And Global Trade services. If it is possible With Screen shots.

    Hi,
    I have got the CIN material.
    See if it is useful for you.
    SAP SD CIN Configuration
    What is CIN?
    CIN Means Country India Version
    In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenario’s. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself. 
    Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
    Country Version India comes with four pricing procedures as follows:
    - JINFAC (Sales from manufacturing plants) 
    - JINEXP (Export sales) 
    - JINDEP (Sales from depots) 
    - JINSTK (Stock transfers
    CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
    In this IMG activity, you maintain the data relating to your excise registrations.
    - Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
    In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
    - For each excise registration in your business create a registration ID, and state:
    - Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
    - The maximum number of items to be printed on each excise invoice
    - Whether you are allowed partial CENVAT credits
    Maintain Registration ID NUMBER, Excise code number, excise registration number 
    ECC Number: Specifies the organization's ECC number. 
    Excise Registration Number:  A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    Excise range: Specifies the excise range in whose area the excise registration is located.
    Excise Division: Specifies the excise division in whose area the excise registration is located.
    Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
    Indicator for confirming, AED usage Additional Excise duty Percentage.
    These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
    Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
    Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.  This information is used to split the transfer postings' items into multiple subcontracting challans.
    Excise register set description: Description of the excise registers set.
    Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
    Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
    This information is also shown when you post the vendor's excise invoice.
    Maintain Company Code Settings. 
    In this IMG activity, you maintain the data relating to your company codes.
    Document Type for CENVAT Postings. 
    It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
    Indicator for providing debit account overwriting 
    Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
    Automatic balance Indicator - Excise year start month.  The calendar month marking the beginning of the excise year.  This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
    Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
    Days to be considered for excise invoice selection Number of days from document date for excise invoice selection. 
    Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
    Document type for TDS FI posting: Financial accounting document type for TDS posting.
    Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
    Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
    duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
    Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
    Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee. 
    Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.  The rest is posted the CENVAT on hold account, for use in the following year.
    CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
    Exchange rate type - Key representing a type of exchange rate in the system. 
    - You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts. 
    Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
    Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
    Plant Settings - In this activity, you maintain excise information relating to your plants.
    For each plant:
    - Specify whether it is a manufacturing site or a depot.
    - Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
    Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    - Number of goods receipt per excise invoice.
    - Multiple GR for one excise invoice, Single credit
    - Multiple GR for one excise invoice, multiple credit
    Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
    Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts.  But through exemption from the authorities, multiple books can be maintained.
    If your company has only one set of excise registers, then you need to maintain only one excise group.
    1. Create one excise group for each set of registers that you need to keep.
    2. Assign the excise groups to plants.
    3. Maintain whether this Excise group is for a depot or not. 
    If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'.  Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
    4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
    5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later. 
    6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
    7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
    8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
    9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
    10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers. 
    11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
    Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
    Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.  At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
    Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different  procedures for goods receipt and invoice generation. 
    - GR Per Excise Invoice
    - Multiple GR for one excise invoice , Multiple credit
    - Multiple GR for one excise invoice , Single Credit
    Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
    The excise invoice is created in the background. - If you want to make use of this function, you must also define the
    default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
    RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by  posting the selection of excise invoices in single step.  If this is not selected then you need to separately do RG23D selection
    followed by PGI and then RG23D verification and posting.  If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection. 
    Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
    Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
    Also we can set indicator for creation of part 1 for:
    - Blocked stock 
    - Stock transport order
    - Consignment stock
    Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.  Based on excise regulations and exemptions from the authorities you can  maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    - Define excise series groups based on type of outgoing document
    - Assign series group to excise registration ID
    - If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    - If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator.  Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents. 
    - No account postings for CENVAT in sales cycle 
    - No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings. 
    Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
    Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators. 
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in  India.
    - If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    - If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents. 
    Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    - Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    - Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    - Specify the conditions in the sales order that are used for excise rates.
    - Specify the countervailing duty condition type used for import purchase orders.
    See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination. 
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Condition-Based Excise Determination 
    When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
    Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise  determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
    Customizing : Make the settings in Customizing Basic -> India -> for Logistics – General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and …-> Settings Determination. 
    These activities include one activity where you define a tax code for condition-based excise determination.
    Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each. 
    Day-to-Day Activities -  When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
    When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice. 
    Creating Condition Records for Excise Duty 
    1. In the command field, enter FV11 and choose . 
    2. Enter the condition type that you want to create a condition record for and choose . 
    The Key Combination dialog box appears.
    3. Select the combination of objects that you want to create the condition record for.  On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
    4. Choose . 
    5. Enter data as required.  - In the Tax Code field, enter the dummy tax code that you have defined. 
    6. Save the condition record. 
    Formula-Based Excise Determination  -  When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
    In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance. 
    You maintain the following types of data:
    - Plant master data
    You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
    - Vendor master data
    For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type – for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.  For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
    - Customer master data
    Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
    Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
    - Material master data
    Each material is assigned a chapter ID. 
    - Excise tax rate
    For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
    If your business only qualifies for partial CENVAT credit, you must customize your system accordingly. 
    Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
    1. Looks up the customer master data to see what status you have assigned the customer. 
    Let's assume you've assigned the customer status 3. 
    2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
    3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7. 
    4. The system determines the chapter ID of the ball bearing for the plant. 
    Let’s assume the chapter ID at plant for the ball bearings is 1000.01.
    5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under 
    status 7. 
    Define Tax Code for Purchasing Documents -  In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
    determination. 
    - Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    - Assign Tax Code to Company Codes
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from  another one. For example, when you enter an incoming excise invoice from a
    purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    - For taxes on purchases, use the condition types contained in the tax procedure.
    - For taxes on sales, use the condition types contained in the pricing procedures.
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
    Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements - You have set up G/L accounts for each of the processing keys listed below.
    - Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise  invoice verification.
    - VS1 (basic excise duty)
    - VS2 (additional excise duty)
    - VS3 (special excise duty)
    - VS5 (sales tax setoff)
    - MWS (central sales tax)
    - MW3 (local sales tax)
    - ESA (service tax)
    - ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
    duty and CENVAT) are to be posted to for the various transaction types.  Enter all the accounts that are affected by each transaction type.  If you use sub transaction types, enter the accounts for each sub transaction type as well.
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.  The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example:
    - Excise TT DC ind Account name
    - GRPO CR CENVAT clearing account
    - GRPO CR RG 23 BED account
    - GRPO DR CENVAT on hld account
    Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
    accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the: 
    - Excise group
    - Company code
    - Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types. 
    Requirements
    You have already:
    - Defined the G/L accounts
    - Defined the excise groups
    - Maintained the transaction accounts
    Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
    Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.  Config setting needed to be done in order to get the Excise Details Screen in Material Master.
    Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
    Following document helps you to do this configuration.
    - Material Master à Logistics General 
    1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
    2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is “Foreign Trade: Import Data”. Select the same and click on Sub screens in the left frame.
    4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
    5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 – 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205. 
    6. Save the setting.
    7. Create a Material Master and check whether in Screen Foreign Trade 
    Reward me points,if it is useful.
    Thanks,
    Raj.

  • Global Trade Services

    Hi
    Is Global Trade Services part of standard SAP ERP or does it involve separate licencing? Reason I am asking is that I do not see in our IDES, any transaction menu for SAP GTS but I see the nodes in SPRO for SAP GTS. What can be the reason for this?
    Regards
    Sriram

    Hi
    Your Question :
    Is Global Trade Services part of standard SAP ERP or does it involve separate licencing?
    Answer :
    Yes . GTS is a separate stand alone system(like BI) requires separate licencing.
    Regards,
    Lanka

  • Global Trade Service Training

    Hi,
    kindly help me where can I find a Classroom Training for Global Trade Service.
    basically I am new with GTS System.
    Thanks.
    Iris Silvan

    Hi Iris
    The SAP GTS component is under the GRC space in SCN (though it does not seem very active). The following document was published back in 2012 SAP BusinessObjects Global Trade Services (GTS)
    In relation to training, you can look at the SAP training site for your country via https://training.sap.com/g/en to search for available courses relating to GTS - you will find GTS100 for the overview and GTS200 for configuration - both as classroom training.
    Have a look at the courses and then contact your local SAP training office for bookings if none are available for your country. Alternatively, if you have funding for training but cannot find a classroom option there are online ones or SAP Learning Hub
    Regards
    Colleen

Maybe you are looking for

  • No Styles in Premiere elements 13

      Ihave a problem. Several times reinstall, no success. Premiere elements 13 and Windows 8.1. Title and text, then adjustments and then style. There I find no styles, zero. Same program on my laptop and Win 7: all styles available. How can I change t

  • Is it possible to buy macbook air with russian keyboard?

    Is it possible to buy macbook air with russian keyboard?

  • Dynamic Parameters in URL-IView

    Hai, I am using the ESS-framework and I want to create a link which calls an URL with dynamic parameters. I have already created an URL-Iview with the example url: http://a.nl:51800/webdynpro/dispatcher/sap.com/pcui_gp~isr/IsrForm And I also defined

  • Photoshop Photography Program: sign in/sign out not working

    I signed up yesterday for this program.  Today I downloaded the Creative Cloud application.  Now I am trying to download the lastest version of Photo Shop and Lightroom. It tells me to sign in.  I sign in and it says I signed out.   Nothing works

  • Ellipse Marquee Tool designing lines too faint

    My eyes are getting older and on some photos, the working lines are too faint or the wrong color to use draw the elipses.  Is it possible to change the working lines, the li8nes created when we're dragging, to be brighter or different colors.  Deke's