No saving my settings for server access

Every time I connect to my serve I have to go into
site->manage sites and re enter the server login and password
details to gain access. I have several web site I develop and have
to do this every time. I have the check box ticked to save but it
never happens, also how do I backup all these details in case of
crashes.
Many thanks
VoodooJai

Some versions of DW have "updaters" that resolve this known
issue.
"VoodooJai" <[email protected]> wrote in
message
news:g47rku$brr$[email protected]..
> Every time I connect to my serve I have to go into
site->manage sites and
> re
> enter the server login and password details to gain
access. I have several
> web
> site I develop and have to do this every time. I have
the check box ticked
> to
> save but it never happens, also how do I backup all
these details in case
> of
> crashes.
>
> Many thanks
>
> VoodooJai
>

Similar Messages

  • LAN side firewall settings for Direct Access (Windows Server 2012 R2) in DMZ?

    I am currently planning to set up our first Direct Access server (Windows Server 2012 R2). I will be in our firewall DMZ and we will be using the IP-HTTPS listener.
    For the Internet facing rule only TCP 443 inbound/outbound is sufficient but for the LAN facing rules (not talking about the Windows server firewall) what would be the recommended firewall rules for a Direct Access server? Is there a best practice guideline
    to follow for this? Appreciate any advice or comments. Thank you.

    Hi Barkley
    Please see this Technet Link which will backup your requirements - https://technet.microsoft.com/en-gb/library/jj574101.aspx
    Section Reads - 
    When using additional firewalls, apply the following internal network firewall exceptions for Remote Access traffic:
    ISATAP—Protocol 41 inbound and outbound
    TCP/UDP for all IPv4/IPv6 traffic
    Also another link from http://www.ironnetworks.com/blog/directaccess-network-deployment-scenarios#.VO3tfvmsVrU
    "I have had a number of conversations with security administrators and network architects who have expressed a desire to place the DirectAccess server between two firewalls (firewall sandwich) in order to explicitly control access from the DirectAccess
    server to the internal corporate network. While at first this may sound like a sensible solution, it is often quite problematic and, in my opinion, does little to improve the overall security of the solution. Restricting network access from the DirectAccess
    server to the internal LAN requires so many ports to be opened on the inside firewall that the benefit of having the firewall is greatly diminished. Placing the DirectAccess server’s internal network interface on the LAN unrestricted is the best configuration
    in terms of supportability and provides the best user experience."
    Kindest Regards
    John Davies
    Thank for your reply and information John. I find it somewhat disappointing that Microsoft does not provide much more in the way of documentation and information regarding this topic. I required more information to show to our security team so they will allow
    us to have the internal facing NIC not have more restrictive rules in place as it is a security concern.

  • Web pages are not being saved to Reader for offline access

    When I find a web page that I wish to keep for offline access I have tapped the Share button and then Save to reader.
    I have carried this out for approx a dozen pages and when I access the Reader (specs graphic) none of the pages are listed. Is there a setting I have to activate to allow pages to be saved? I thought from the User guide this should happen automatically

    We, too, are having this problem.  I see two posts in 2008-07 reporting this, but no answers and nothing via Google.
    Details:
    1. The web server is a Red Hat Linux / Apache.
    2. It seems site-wide:  several department webmasters have reported the problem.  It may be limited to webs that are using Contribute and check-in/check-out.
    3. The only thing I can think might be causing it is that our NTP daemon is broken, and the time of day drifted ~6 minutes (I have since reset the clock by hand).

  • How can I export the saved preset settings for Batch Renaming on Bridge?

    I've developed a few Batch Renaming presets and want to share them with my team, but couldn't find where they are saved.

    but couldn't find where they are saved.
    I can only provide you with the path for a Mac but Windows should be something similar
    User library (By default hidden per OSX7, use menu go with option to reveal)/ Application Support / Adobe / Bridge CSxx / Batch Rename Settings. Inhere are the saved files with the extension '.setting'

  • Recommendation/suggestions for server access

    Hi, I do not know if I have ask the question in the correct thread or forum. So I decided to put into Windows server management. 
    My company does create website and also host for them, and we also have FTP services for some of the clients. currently we have about 6 servers, and all of them are stand alone web server,
    with SQL installed in each and everyone of them. THis have been running for past 7 years and I am having a hard time managing it due to licensing and also too many web and ftp services spreading across all the servers.
    We have decided to virtualize most of them and also have a centralize storage (SAN). we have bought the necessary hardwares (3x hosts and 1 SAN) and also licensing to do it.
    Now this is my problem, i am the only one managing the whole infra. I have a group of developers who create the website and upload them to the respective servers (normally via FTP), I have
    also clients who have FTP services with us for them to dump their files to their clients. There are many times where the servers is infected with viruses mainly due to the files they uploaded, or the server is compromised as they have leaked out their password
    and of course many other reasons too. I am tired of clearing the shit every now each time the server is infected. 
    I need some suggestions or ideas or pointers, of the best and common practice that how i should managed the developers and users or their account. My new setup will be
    3 Hosts, 1 SAN
    1 Web VM - Shared hosting.
    1 FTP VM
    1 SQL VM
    multiple Web VM - Dedicated hosting
    1 DNS
    1 Backup server
    I have about 6 developers who need toremote access the above servers every now and then to upload files or edit the files for the WEB. I also have clients who pay for our FTP services.
    I have a firewall, AV. 
    Dear experts, please kindly advise me. 
    Regards,
    Knight

    It depend on resources and operating system (unknown). For VM and host use
    System Center or manage servers remotely from one server or workstation (after installing RSAT).
    HTH
    Milos

  • Developing site to use external javascript files for server access. my ain.js file just displays and does not execute. Why?

    My ain.js file is meant to work on and access server files for tracking all visitors to the site I am developing.
    One way to access it, in my plan, is to use index.htm. when I open index.htm it displays correctly and presents a link to ain.js with a query line (?a=zzzzz--e2).
    The entire file is displayed; but not executed.
    Short of building my own server (prior to publishing what I am developing) how do you propose I test what I have written?
    As a retiree, I have limited funds (the purpose of developing a website is meant to coorect that).

    This forum is for Firefox user support, very few of our contributors are developers.
    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • Iphoto not saving slideshow settings

    HELP!  I am DESPERATE!!!!!  I have been working on a 45 minute slideshow for my parents 50th wedding anniversary party ALL WEEK.  Iphoto is NOT SAVING my settings for the transisions between photos or the time each slide plays for. It is happening at random. No one at Apple has been able to help me...as a matter of fact I thought I was going to really lose it for about the 10th TIME when the last guy I spoke to tonight told me that I needed to speak with an IAPP advisor as he could not help me only being a senior advisor.  My questions is WHY THE HECK HAVE I NOT BEEN transferred to an IAPP advisor all week when I have been calling them repeatedly trying to get issue resolved.  This was the only person who said I should speak to someone in IAPP.  I now have only FRIDAY to get this resolved as the party is at my house on SATURDAY!!!! 
    I know other people have had some similiar problems (glitches) from searching the internet and yet the people I have been speaking with say they have never had someone call up with this problem.....???? 
    Anyone else out there have this problem and find a way to fix it? 
    (BTW--they already had me go the route of trashing the psist file and some cache file among other things......)

    Terence
    Thank you for replying.  My ranting was just out of utter fustration of literally sitting at a computer since Sunday redoing and redoing everything in order to have try and have a nice slideshow for my parents rather than just dumping a bunch of photos & music into a slideshow.  It loses its punch when things don't fall into the proper place or transition right.....
    2 things Apple had me do initially:
    move a cache file and psist file out of library to desktop and then into my trash (I then did a secure empty trash)
    senior advisor tried to have me duplicate the problem while he was accessing my computer---COULD NOT. He said unless I can duplicate for him he can't help me.  He also said that he has never heard of anyone else complain of this & has never heard of anyone making a slideshow so big???  Really?  It is 45 minutes with 375 pictures.  While a little lengthy I find it hard to believe they are not used to anyone makng a slideshow this long.
    Anyways later I called back when I felt I could duplicate issue.  I spoke with another rep.  He had me change ALL SLIDES from 5 seconds to 1 second and unclick default transition thinking that this could be causing the system to keep wanting to ovverride my manual individual settings if I had any slide less than 5 seconds or another transition.  However he also was miffed by the "size" of my slideshow and said that Iphoto slideshow really wasn't meant for something of this size and suggested I use IMovie.  While I had never used it I tried it. After spending all day getting the photos in IMovie and in same order I started editing the transitions and slide times....well this was no good because if I changed one thing it caused a ripple effect and changed stuff.  Sooooooo I called Apple back and spoke with Senior advisor that told me that this is what Imovie does and I really should not use it for what I was trying to do ....he still felt iphoto slideshow was the way to go.  So we went back to iphoto slideshow hoping that the couple of small changes the other advisor had me do had worked....no luck. I then decided to try and start fresh with NEW slideshow, new settings and break up my one big slideshow into smaller slideshows & then eventually dumpt into Imovie......No luck.  With about 30 photos I noticed it wasn't saving my slide times again or now the speed of transitions.  So the bottom line is that there is a GLITCH with iphoto and I have seem similiar complaints on these forums. 
    I greatly appreciate your suggestion of trying other apps and would definately do that if I had the time but alas the party is tomorrow and I have only today to get it resolved and redone. 
    Thank You for Your Time
    Heidi

  • Mail not removing copy for server - POP acct

    I have checked "Remove Copy From Server" in Mail Preferences>Accounts>Advanced. I selected "When moved from Inbox". Copies are not being removed after I delete them from my inbox - the deleted messages are still in my Inbox when I login to my mail account via the web interface. The messages are in the Trash in the Mail app. I am using a POP account from SBC (my ISP) that runs on the Yahoo mail platform. Any ideas or suggestions?

    I am having the same problem with my Yahoo account. After monkeying with the settings and saving the settings for that on session it seemed to do it but when I closed Mail and restarted it it did not continue to remove the trashed emails. So this option is definitely broken, at least for yahoo.

  • Is there a way to export settings for a resource group in new portal?

    The old portal allowed you to export the XML for the settings for a VNET. I don't see the equivalent feature in the new portal. I'd like to be able to download a copy of the settings for an entire resource group to use as a template file for creation of
    a new resource group deployment using the New-AzureResourceGroupDeployment PowerShell script.

    Hi,
    Thanks for posting here.
    We have the syntax for saving the settings for a resourcegroup on new portal but that saves it on JSON file.
    Parameter Set: Default
    Save-AzureResourceGroupGalleryTemplate [-Identity] <String> [[-Path] <String> ] [-Force] [ <CommonParameters>]
    Ref: https://msdn.microsoft.com/en-us/library/dn654590.aspx
    Hope this helps you.
    Girish Prajwal

  • Settings for gmail?

    I know the settings for normal access but does anyone know what settings you use for sync email?

    nokia messaging email is supported in your device. Install it using the settings wizard(if preinstalled in device) or go to nokia messaging email site and choose your device and enter your phone no to get a link to download the app. Using the app you can choose to setup your multiple accounts in a single app to access all your mails together or you can set up a manual mailbox in messaging folder that delivers messages manually for a single account that you choose for.

  • What are the correct settings for my WRT54GS for using remote access on a Windows Home Server?

    I can not remotely access my Windows Home Server from outside.  What are the correct settings for my WRT54GS?

    I have opened ports 80, 443,and 4125 to PCP.  The  router address is http://192.168.1.1, my address is 221.40.138.170.
    Thank you.

  • Help setting up Lion Server for remote access

    I have been going in cricles for weeks trying to set this up correctly.  Can anyone tell me what I'm doing wrong?
    I got Lion Server and Server Admin Tools all updated and have been trying to follow Terry Walsh from We Got Served's guide but I missing something.
    I purchased a domain from GoDaddy. Let's call it bradnet.com
    My domain and dyn domain are not really what I have typed here but close enought that they should work for my example and trouble shooting.
    Because my ISP (Comcast) doesn't provide a static IP I registerd for an account with dyn.com.  This is where I get really confused.  With dyn.com i created a host name: bradnet.dyndns-rocks.com and downloaded there updater software.  It found my public IP address and said everything is ok.
    I went back to GoDaddy and in my DNS manger page added the host: bradnet.dyndns-rocks.com and entered my public IP.
    I then went to the server pane to edit the host name.  I followed your instructions to edit the name and selected Host Name for Internet.  I left the computer name as mini (what I had previously named it for file sharing before the server upgrade) and entered  mini.bradnet.dyndns-rocks.com as the host name.  When it takes me back to the server pane, in the bottom window it states:
    Your Server's host name is mini.bradnet.dyndns-rocks.com, and its IP address is 192.168.1.10. You can change network settings in the Server pane.
    I never get the your network is configured properly message.
    I went and set my computer's IP to DHCP with manual address (although all of my machines are set up with DHCP reservations so I guess that is a little redundant) to 192.168.1.10.
    I skipped the port forwarding step because I am using the latest AirPort Extreme as my router.
    I then opened a browser and tried:
    http://bradnet.com
    http://mini.bradnet.dyndns-rocks.com
    http://mini.bradnet.com
    http://bradnet.dyndns-rocks.com
    All of these got me the can't find the server response from Safari.
    Also, I have not yet set up Directory Services.  Terry's guide seems to suggest to do this step first.
    I'm sure I have messed up some step somewhere can you see what I have done wrong?
    Also, is it a problem to set up open directory services using a .local host and then go back and change it for internet access later or do you need to set that up from the start?  My family is getting impatient with me trying to get this to work.
    Thanks for any help anyone can offer!
    Brad

    That manual page is not fully correct. There is written:
    Public UDP Port(s): <enter the appropriate UDP port value(s)>
    Public TCP Port(s): <enter the appropriate TCP port value(s)>
    Private IP Address: <enter the reserved IP address of the host device (from step 1)>
    Private UDP Port(s): <enter the same Public UDP Ports or your choice>
    Private TCP Port(s): <enter the same Public TCP Ports or your choice>
    But it should be:
    Public UDP Port(s): <enter unique UDP Ports of your choice>
    Public TCP Port(s): <enter unique TCP Ports of your choice>
    Private IP Address: <enter the reserved IP address of the host device (from step 1)>
    Private UDP Port(s): <enter the UDP Ports used by your device>
    Private TCP Port(s): <enter the TCP Ports used by your device>
    Make sure you use the same ports in the private settings as you have defined in your IP camera. Normally a camera will use port 80 by default, so use 80 here.
    The Public ports must all be unique. If you have not defined a port 80 here, you can also use 80. This will fail however when using multiple cameras. I for instance have 5 IP cameras and use the public ports 8451, 8452, 8453 etc.

  • How do I access my raw settings for further use?

    I opened a jpg in CR, made some changes, opened the image, then saved (from within PS) and closed it.
    Later I needed to create a duplicate of this image and apply the same CR settings I'd used, but I can't find them. When I open the original jpg, all of the CR settings are set to zero.
    Is there any way I can access the CR settings I entered? I want to see what they are, not delete them, not get back to the pre-CR-edit stage.
    If this is not possible, what could I have done otherwise to retain access to my CR settings? Should I have saved the image from within CR? If so, how would the CR settings be availalbe for tweaking or copying?
    Is there an automatic xmp file that would have this info, and if yes, where would i find it?
    Finally, how do I save CR settings in the future for subsequent access?
    Many thanks!

    The xmp data is written into the original jpeg file, not a sidecar file.
    Here's the drill (I'm doing it as I write this msg):
    1. Select a jpeg in Bridge.
    2. Right click on the image and select Open in Camera Raw...
    3. Perform an edit (I did a drastic exposure reduction to make the edits obvious).
    4. Click on Open Image, comes up in Photoshop with edits.
    5. Shutdown PS and Bridge.
    6. Re-open Bridge, select and open same image.  Opens in Camera Raw automatically, shows edits, and new CR settings.
    As I stated in my earlier post, the only way to "de-Camera Raw" the jpeg image is to clear settings from within Bridge.  Again, the jpeg is being re-written with the edits within the file as exif data.  And no, there is no message that such a re-write is occurring.
    Richard Southworth

  • The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly

    i have an issue when loading a workflow. it gives me a following error "The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly". it doesnt send me any alerts and worlflow fails at the end
    with the above error message.

    Hi,
    I agree with Bistesh. But after Outgoing e-mail settings are configured properly, if the issue still exists,
    It may result from your Anti-Virus. Please refer to the following steps:
    Open MCAfee Console and go to Access Protection window.
    Click Anti-Virus Standard Protection and edit “prevent mass mailing 
    worms from sending emails” rule.
    Now we need to know which processes are being blocked therefore we need to check the MCAfee Log located at
    C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection\AccessProtectionLog.txt
    you may find entries of DtExec , DtExecUI and DatabaseMail90, now these processes need to be entered in the exclusion list of selected rule .
    Reset the IIS And SharePoint Timer service to check if this works for you.
    Here are some similar issues with you, you can use as a reference:
    http://social.technet.microsoft.com/Forums/en-US/667f0d61-4914-43fa-80c1-8cf430b113bb/workflow-email-not-working-but-normal-email-alerts-working-fine?forum=sharepointgeneralprevious
    http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
    Best Regards,
    Lisa chen

  • Trying to call a Webservice - "Settings for the J2EE Server do not exist."

    Hi, we're on SAP ECC 6.0 and I'm trying to get access to a webservice:
    BAPI converted to Webservice ok
    Webservice activated ok
    http active ok
    WSADMIN - click on the WSDL button - browser launches, user id requested, userid given, WSDL displays perfect! Even tested from the outside.
    WSADMIN - click on the Web service homepage - Settings for WDSL generation (RPC or Document style, same result) - Error - "Settings for the J2EE Server do not exist."
    Internet browesr - I go to the URL for the WSDL - works again perfect!
    Internet browesr - I go to the URL  - error ! <faultstring xml:lang="en">SOAP processing failure, error id = 112 </faultstring>
    Are the two errors the same?
    Do I have to have a J2EE server to enable Webservices?
    Is this a complex system change?
    Is there a workaround?
    Thanks for any tips on getting Webservice to function
    Philip

    hi,
    when the WAS ABAP has a webserver running and the WSDL service up and running (WSDLs are created dynamically) you get the WSDL served from WAS ABAP.
    "Webservice homepage" is an application written in Java and running on WAS Java., So, if you want to use that application you have to have a WAS JAVA up and running, you have to have the application 'Webservice homepage' up and running and of course on WAS ABAP you have to have the URL of the WAS JAVA specified to enable the WSADMIN function to link you to the Java app.
    Most probably you do not even have a WAS Java running and/or the application 'webservice homepage" not set up. Either way, in my opinion the application "webservice homepage" is crap anyway (because it is not really independent. if SAP implements something strangely on the server side they of course implement it the same way on the client/testing side, so you never find out that in real world scenarios e.g. no client understands the feature X the way SAP implemented it). use any non-SAP-tool to test your SAP webservices, e.g. XML Spy, or SOAPUI.
    my 2 cents,
    anton

Maybe you are looking for