No Service for System SAPECC(Sender Port), Client800(R/3 system client 800)
Hi friends,
I am new to XI/PI I am working with IDOC to Flat file scenario I am facing the folllowing error.
No Service for System SAPECC(Sender Port), Client800(R/3 system client 800) in integration Directory.
can any one tell what was the reason for this error.
Thanks in Advance,
Ravi Yasoda.
Hi Ravi,
Have you imported the Business System in Integration Directory?
Check whether you see the logical system name in adapter specific identifiers or not...
Also check from integration directory that cache notification was done and also check SXI_CACHE in the abap stack.
See this thread...
No service for system SAP***, client 001 in Integration Directory
Please go through below content from sap note for your issue...
Error message: No service for system SAPABC client 123 in the integration directory
Solution:
You send IDocs from system ABC to XI. In the control record of the IDoc,the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the
type (business-system/business-service):
Business system
-> Activities in the System Landscape Directory (SLD)(Create technical
system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client. For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the
"Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with Transaction SLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical
system under "Objects"->"Adapter-specific identifiers". Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
-> Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD. In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific
identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
Regds,
Pinangshuk.
Similar Messages
-
Proxy settings for dynamic ftp send port
Does anyone have an idea how to configure the proxy settings when using a dynamic send port to connect to an ftp server?
When using the FTP send port there is the property 'Server' to specify the proxy settings, but how would this be done with a dynamic send port?
I can't find anything about this. And there doesn't seem to be a property
FTP.Server according to intellisence in my orchestration.
Kind regards,
Mitch Vanhelden
Blog: http://mitchvanhelden.blogspot.comIt seems like most or all of the FTP properties are exposed in the Global Property Schemas assembly. The FTP properties are under the "FTP" namespace (see FTP property schema below).
One thing you might try is to get it working (simple messaging) using a static FTP send port. Once it is working, turn on send port tracking of message properties (before and after port processing). Inspect the tracked message for the FTP
related properties set during static transmission and try setting these within your orchestration.
<?xml version="1.0" encoding="utf-16"?>
<xs:schema xmlns="http://schemas.microsoft.com/BizTalk/2003/ftp-properties" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" targetNamespace="http://schemas.microsoft.com/BizTalk/2003/ftp-properties" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:annotation>
<xs:appinfo>
<b:schemaInfo schema_type="property" xmlns:b="http://schemas.microsoft.com/BizTalk/2003"/>
</xs:appinfo>
</xs:annotation>
<xs:element name="RepresentationType" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="198b2027-4cde-4677-88f1-7b66caf6473a"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="SSOAffiliateApplication" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="8045bcbe-3285-412c-8b5a-dc3be5978c9b"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="UserName" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="6E789556-2F81-4fa6-B8E2-5214F1662289"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="Password" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" isSensitive="true" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="FEFD9283-C98A-470d-8E0A-C00214EE4047"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="BeforePut" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="58C0F130-2D2D-4374-8418-714A31046A58"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="AfterPut" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="CFBD9956-B0C6-48af-9257-4E27C7771998"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="ReceivedFileName" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="441B372A-23A1-4465-8329-F56AC0BDBFD8"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="MaxConnections" type="xs:unsignedInt">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="0A580338-036A-411B-A28A-1BCC86E56458"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="CommandLogFileName" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="CCE01F9B-8869-4216-BD7A-8F476FA40327"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="AllocateStorage" type="xs:boolean">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="4945CA1F-A812-483B-B32F-C98513EBF51E"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="PassiveMode" type="xs:boolean">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="74B6373E-550F-4434-B2D1-DE912ACDB3A7"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="SpoolingFolder" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="1C703221-ADE1-4DF7-9D6E-1770903DC614"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="UseSsl" type="xs:boolean">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="D032AB42-E927-470C-B5E8-E59A5E32851D"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="UseDataProtection" type="xs:boolean">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="42E3D7F0-5FF5-4C6E-8E72-BD76D203C6DD"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="FtpsConnectionMode" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="EDA0F134-3F42-4DD7-8428-75BA65E7C4CA"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="ClientCertificateHash" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo propSchFieldBase="MessageContextPropertyBase" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" propertyGuid="423E6603-652E-4A61-B49F-B632031E3180"/>
</xs:appinfo>
</xs:annotation>
</xs:element>
</xs:schema>
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful. -
Oracle Services for MicTraSrv 9i - recovery port?
When you install OS for MTS with Oracle 9i client it prompts you for a port that the recovery service listens on - how would I know/find out what number I should put there?
Thanks
JoeWith this command you are going to know if your operating system is accepting requests by port 2030 or another:
oracle@chopin:~> netstat -a
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 *:netbios-ssn *:* LISTEN
tcp 0 0 *:sunrpc *:* LISTEN
tcp 0 0 *:x11 *:* LISTEN
tcp 0 0 *:ndmp *:* LISTEN
tcp 0 0 *:giop *:* LISTEN
tcp 0 0 *:ncube-lm *:* LISTEN
tcp 0 0 *:telnet *:* LISTEN
tcp 0 0 localhost:smtp *:* LISTEN
tcp 0 0 chopin.ease:netbios-ssn bacilos.ease.com.v:3993 ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm perales.ease.com.:svnet ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm grapelli.ease.c:roboeda ESTABLISHED
tcp 0 0 chopin.ease.com.v:57700 chopin.ease.co:ncube-lm ESTABLISHED
tcp 0 0 chopin.ease.com.v:57697 chopin.ease.co:ncube-lm ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm grapelli.e:h323hostcall ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm evanescence.ease:rfx-lm ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm grapelli.ease.co:caicci ESTABLISHED
tcp 0 0 chopin.ease.com.v:60378 chopin.ease.co:ncube-lm ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm grapelli.e:h323gatedisc ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm grapelli.e:h323gatestat ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm bonjovi.:fc-faultnotify ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm chopin.ease.com.v:60378 ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm chopin.ease.com.v:57700 ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm chopin.ease.com.v:57697 ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm beachboys.ease.co:nppmp ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm grapelli.ease.com.:2179 ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm unsolopuebl:taligent-lm ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm elefantes.ease.com:3705 TIME_WAIT
tcp 0 0 chopin.ease.co:ncube-lm grapelli:netview-aix-11 ESTABLISHED
tcp 0 0 chopin.ease.co:ncube-lm evanescence.ease.c:tsb2 ESTABLISHED
tcp 0 0 *:ssh *:* LISTEN
tcp 0 260 192.168.0.10:ssh 192.168.0.176:catchpole ESTABLISHED
udp 0 0 chopin.ease.:netbios-ns *:*
udp 0 0 *:netbios-ns *:*
udp 0 0 chopin.ease:netbios-dgm *:*
udp 0 0 *:netbios-dgm *:*
udp 0 0 *:ndmp *:*
udp 0 0 localhost:34470 *:*
udp 0 0 *:sunrpc *:*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 2302 public/cleanup
unix 2 [ ACC ] STREAM LISTENING 2309 private/rewrite
unix 2 [ ACC ] STREAM LISTENING 2313 private/bounce
unix 2 [ ACC ] STREAM LISTENING 2317 private/defer
unix 2 [ ACC ] STREAM LISTENING 2321 public/flush
unix 2 [ ACC ] STREAM LISTENING 2325 private/smtp
unix 2 [ ACC ] STREAM LISTENING 2333 public/showq
unix 2 [ ACC ] STREAM LISTENING 2347 private/error
unix 2 [ ACC ] STREAM LISTENING 2363 private/local
unix 2 [ ACC ] STREAM LISTENING 2377 private/virtual
unix 2 [ ACC ] STREAM LISTENING 2394 private/lmtp
unix 2 [ ACC ] STREAM LISTENING 2411 private/cyrus
unix 2 [ ACC ] STREAM LISTENING 2423 private/uucp
unix 2 [ ACC ] STREAM LISTENING 2442 private/ifmail
unix 2 [ ACC ] STREAM LISTENING 2455 private/bsmtp
unix 2 [ ACC ] STREAM LISTENING 3628839 /tmp/.X11-unix/X0
unix 2 [ ACC ] STREAM LISTENING 2469 private/vscan
unix 2 [ ACC ] STREAM LISTENING 2481 private/procmail
unix 12 [ ] DGRAM 874 /dev/log
unix 2 [ ACC ] STREAM LISTENING 12289 /var/tmp/.oracle/sEXTPR
OC
unix 2 [ ACC ] STREAM LISTENING 12291 /var/tmp/.oracle/s#1270
.1
unix 3 [ ] STREAM CONNECTED 4409843
unix 3 [ ] STREAM CONNECTED 4409842
unix 2 [ ] DGRAM 4409777
unix 3 [ ] STREAM CONNECTED 3628863 /tmp/.X11-unix/X0
unix 3 [ ] STREAM CONNECTED 3628862
unix 3 [ ] STREAM CONNECTED 3628850 /tmp/.X11-unix/X0
unix 3 [ ] STREAM CONNECTED 3628844
unix 2 [ ] DGRAM 1105191
unix 2 [ ] DGRAM 135991
unix 2 [ ] DGRAM 4054
unix 2 [ ] DGRAM 3668
unix 2 [ ] DGRAM 2607
unix 3 [ ] STREAM CONNECTED 2488
unix 3 [ ] STREAM CONNECTED 2487
unix 3 [ ] STREAM CONNECTED 2476
unix 3 [ ] STREAM CONNECTED 2475
unix 3 [ ] STREAM CONNECTED 2462
unix 3 [ ] STREAM CONNECTED 2461
unix 3 [ ] STREAM CONNECTED 2450
unix 3 [ ] STREAM CONNECTED 2449
unix 3 [ ] STREAM CONNECTED 2436
unix 3 [ ] STREAM CONNECTED 2435
unix 3 [ ] STREAM CONNECTED 2418
unix 3 [ ] STREAM CONNECTED 2417
unix 3 [ ] STREAM CONNECTED 2404
unix 3 [ ] STREAM CONNECTED 2403
unix 3 [ ] STREAM CONNECTED 2388
unix 3 [ ] STREAM CONNECTED 2387
unix 3 [ ] STREAM CONNECTED 2372
unix 3 [ ] STREAM CONNECTED 2371
unix 3 [ ] STREAM CONNECTED 2356
unix 3 [ ] STREAM CONNECTED 2355
unix 3 [ ] STREAM CONNECTED 2340
unix 3 [ ] STREAM CONNECTED 2339
unix 3 [ ] STREAM CONNECTED 2330
unix 3 [ ] STREAM CONNECTED 2329
unix 3 [ ] STREAM CONNECTED 2324
unix 3 [ ] STREAM CONNECTED 2323
unix 3 [ ] STREAM CONNECTED 2320
unix 3 [ ] STREAM CONNECTED 2319
unix 3 [ ] STREAM CONNECTED 2316
unix 3 [ ] STREAM CONNECTED 2315
unix 3 [ ] STREAM CONNECTED 2312
unix 3 [ ] STREAM CONNECTED 2311
unix 3 [ ] STREAM CONNECTED 2308
unix 3 [ ] STREAM CONNECTED 2307
unix 3 [ ] STREAM CONNECTED 2305
unix 3 [ ] STREAM CONNECTED 2304
unix 3 [ ] STREAM CONNECTED 2301
unix 3 [ ] STREAM CONNECTED 2300
unix 3 [ ] STREAM CONNECTED 2298
unix 3 [ ] STREAM CONNECTED 2297
unix 2 [ ] DGRAM 2283
unix 2 [ ] DGRAM 1939
unix 2 [ ] DGRAM 1904
unix 2 [ ] DGRAM 1090
oracle@chopin:~>
You can apply this command ( netstat -a ) in unix/linux/windows of the same way
Joel P�rez -
We set up the Data Management Gateway and created a new data source (odata to SQL via sqL user)
Did a connection test and it was successful!
Tried the URL (maybe it needs more):
https://ourdomain.hybridproxy.powerbi.com/ODataService/v1.0/odatatest
That resolves to some :8051 port address and then spits out this message:
The server encountered an error processing the request. See server logs for more details.
I checked and the data management gateway is running.
Does that 8051 port need to be opened on our firewall for this server? How can I confirm that is the issue.. I see no event on the server indicating this is the issue?
I am seeing this event:
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'PowerBiTest'. [CLIENT: IP of the Server]O365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Wcf web service send port retry?
We are contacting external wcf web services. We don't control these services and they could be returning an exception for a short while (which is "ok"), so we need to retry for a given period of time, without suspending the orchestration/sendport.
It used to be simple with web services (.asmx) since the send port would handle the retries as soon as an exception was returned from the web services. With wcf services and the soap fault, it is much more cumbersome.
I know how to do it from an orchestration, but it does add a lot of clutter (have an extra "initialization" construct block so visual studio shuts up about the uninitialized message coming back from the wcf service, define documentspecnames in
our case, define xpath expressions for the fault and the expected response, have a loop, a delay, more variables/expressions, scope, exception block, etc. etc.) for such a simple requirement. We need to contact a couple of wcf services in an orchestration
and the handling of the retries makes it quite large and unfriendly (and this is mostly the retry logic for these wcf services).
So, is there any way to have the send port adapter handle the retries when receiving an exception from a wcf service like it used to be with regular web services?Thanks for you answer, yes I understand that the SOAP fault is just another message and that I need to act accordingly in the orchestration. I'm not refuting that, I'm just looking for a better solution than the one I have now (which seems overly complicated
to me).
I have to specify the documentspecname because we use the built-in xmlreceive pipeline and the type of the exception that the wcf services return is standardized in our organisation... so there are many copies of the schema of this exception deployed on
the servers. I need to specify the schema of the exception coming from my wcf reference in my assembly otherwise I get the "I can't find the right schema blabla" exception.
Of course, if I can stop using the XMLReceive pipeline, I wouldn't have to specify the documentspecname... I'll have to research in detail what this pipeline is doing and see if I can replicate it's functionality, with the addition of the check for the error
in the returned message.
I just want to be sure before proceeding... If I raise an exception in a custom pipeline, the send port retry configuration would apply? -
How to configure Send Handler for BizTalk 2013 Dynamic Send Port on deployment?
Hi,
I do know how to manually configure a send handler for a dynamic send port in BizTalk 2013 Administration console. Though, once you export your application's configuration to a binding file, the dynamic send port's configuration does not
contain any information regarding the send handler. When you try to use this binding file when deploying your application your dynamic port's send handler falls back to the default host instance.
So my question is, how could we automate this process to avoid manual step in a dynamic port configuration during deployment?
Thank you,
--VladHey vlad,
As discussed at work in the office.. I woudl take the powershelll approach for now as a workaround. Here's a trivial script for my local dev box (all in one biztalk & SQL) (must be run in an x86 powershell session):
param
[string] $bizTalkDbServer = ".",
[string] $bizTalkDbName = "BizTalkMgmtDb",
[string] $fileHostInstance = "SendingHost",
[string] $sendPortName = "sm_dynamic_sp_test"
[System.reflection.Assembly]::LoadWithPartialName("Microsoft.BizTalk.ExplorerOM") | Out-Null
$catalog = New-Object Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer
$catalog.ConnectionString = "SERVER=$bizTalkDbServer;DATABASE=$bizTalkDbName;Integrated Security=SSPI"
foreach($sp in $catalog.SendPorts)
if($sp.Name -eq $sendPortName)
"Found send port $($sp.Name), analyzing send handler"
foreach($sh in $sp.DynamicSendHandlers)
if($sh.SendHandler.TransportType.Name -eq "FILE")
if($sh.SendHandler.Host.Name -ne $fileHostInstance)
"Changing $($sh.Name) send handler to '$fileHostInstance' from '$($sh.SendHandler.Host.Name)'"
$sp.SetSendHandler("FILE", $fileHostInstance)
else
"Send handler for $($sp.Name) is already '$fileHostInstance' ignorning .. "
$catalog.SaveChanges() -
Hi All,
I want to set EOIO service for Sender Proxy.
since for proxy no need for sender aggrement, so i did not create it.
When i trigger the Proxy from ABAP report, the messages are going in different orderlast first and first as last, but i want the messages to go in First come First Serve order.
please suggest me.
Thanks in Advance,
SriramHi,
It is possible to set the EOIO for Proxy
We just have to specify the quality of service as Exactly Once In Order in the
message header. This is very easy to specify in the case of File, JDBC, JMS, SOAP and Mail Adapters. This is done in the sender communication channel configuration using the property Quality of Service. You may wonder! Why cant we define the Quality of Service for the XI Sender adapter? The reason is that sender communication channel is not required for ABAP Proxies and even if you manage to create the XI sender communication channel, you will not find a drop down box for quality of service.
Please refer below links
XI: Reliable Messaging EOIO in ABAP Proxies Step by Step process
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
Is EOIO messaging possible using ABAP Proxy in WAS 620?
There is a Serialization Concept-
http://help.sap.com/saphelp_nw2004s/helpdata/en/20/46e3e5975b4de49f222519dd2b7dee/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/65/40c9a4a1fa476288ac61b5fcc6bbde/frameset.htm
Hope this give some idea,
Thanks
Swarup -
Changing sender port in IDOC scenario
Hi,
i am trying to change the sender port in XI (name of the XI-System is CXE) to ZSAPCXE.
I have successfully done the mapping of the IDOC header field (populating the field SNDPOR with ZSAPCXE).
Now i have started my test scenario - sending an IDOC from source system...
In transaction SXMB_MONI i can see, that the mapping was ok (<SNDPOR>ZSAPCXE</SNDPOR>).
But if i start transaction WE02 in the target sytem the port of the incoming IDOC is SAPCXE. What is the problem?
Thanks for any help!Thanks for your help.
So you say, there is no chance to change the sender port?
But why is in transaction WE02 in the target system the inbox port automatically set to SAPCXE?
Is there a user exit for the function module MASTER_IDOC_DISTRIBUTE or anything else available?
Is there a chance to change the sender port in the target system before processing begins automatically?
Is there no option within XI to overwrite the default?
I cant believe that...
Thanks for any ideas -
Hi,
one quick doubt.
I have one orchestration which picks up message from a MSMQ queue. This works fine.
Now I added one more new send port with filter condition to picks up the message from the same queue.
Now my question is, adding a new sendport and subscribing that message will not affect the normal orchestration flow, right?
I m assuming that both send port and orch process, both will get the copy of message from queue.
Correct me if I am wrong.For clarity, yes, both subscriptions will be satisfied independently and actually neither will know anything about the other.
However, there is one circumstance you must consider, but not necessarily do anything about.
If one of the receiving services, the Orchestration or Send Port is Unenlisted, by mistake for example, the messages will still be routed to the other. The means the messages might bypass a required process with no warning or alert, since to BizTalk
everything is perfectly fine.
If both process are required all the time, you should have a single Orchestration Subscriber that branches internally so you can guarantee delivery to the main Orchestration and Send Port. -
How to get "Oracle Services for MTS" working?
I've implemented the microsoft code example (see at the bottom) for the use of distributed transactions (with system.transactions and MTS support). The code works fine as long as I use only MS sqlserver.
Well, I tried one connection to an oracle database and one connection to the sqlserver - and here the trouble starts ;-)
Oracle doesn't care about the transaction. After the command is executed the changes are made to the oracle database at once (no commit has occured at that point) even if the second command isn't successfull.
I suppose at the moment that the problem must be something around the interaction between MTS and oracle database, more precisly the oracle Services for MTS.
I've installed the odp.net client (ODAC1020221.exe).
The installer tells me that oracle data access components 10.2.0.2.21 and within the Oracle Services for MTS are installed.
But I cannot find a service with that name in the service list, OracleMTSRecoveryService is listed, but I'm not sure if that's the right one.
So here are my questions:
What's the name for 'Oracle Services for MTS' in the services list?
Do I have to install more than the odp.net client to get the MTS support running?
Is there a mistake in the code I'm running?
any help is welcome ...
thanx in advance!!!
And here's the code I'm working with:
[Transaction(TransactionOption.RequiresNew)]
public class Worker : ServicedComponent
[AutoComplete]
public void Test()
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.RequiresNew, new TimeSpan(0, 5, 0)))
DbProviderFactory theFactory = DbProviderFactories.GetFactory("Oracle.DataAccess.Client");
using (DbConnection connection1 = theFactory.CreateConnection())
try
connection1.ConnectionString = ".........";
connection1.Open();
DbCommand command1 = theFactory.CreateCommand();
command1.Connection = connection1;
command1.CommandText = "Insert into user (name, surname,benoid) values ('hans','wurst','32315134512345')";
object returnValue = command1.ExecuteNonQuery();
using (SqlConnection connection2 = new SqlConnection("Data Source=localhost;Database=UserManagement;Trusted_Connection=true;"))
try
connection2.Open();
//this command fails
SqlCommand command2 = new SqlCommand("Insert into uuuu (name, vorname) values ('hans','wurst')", connection2);
object retValue = command2.ExecuteNonQuery();
catch (Exception ex)
return;
catch (Exception ex)
return;
scope.Complete();
}hey what's up you figured out your problem with M$DTC/Oracle 11i with ODP.NET trying to do a TransactionScope?
I saw your problem - and I ran into the same.
Re: 10g Express + ODP.NET (version 2.111.6.20) > support TransactionScope?
Trying to install "Oracle Services for MTS" not sure how but working on it now. Doc looks old however,
http://www.oracle.com/technology/tech/windows/ora_mts/index.html
Did you get pass this already? -
Error in send port executed procedure in Biztalk and SQL Server
Hi,
I have a send port which call the below stored procedure
USE
GO
SET
ANSI_NULLS
ON
GO
SET
QUOTED_IDENTIFIER
ON
GO
ALTER
@ProcessId
VARCHAR
(100),
@FilePath
we are revieving the Error as below and the send port is getting suspended
System.Data.SqlClient.SqlException: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 2.
can anyone just help me with this?Begin TRANSACTION
END TRY
BEGIN CATCH
BEGIN
ROLLBACK TRANSACTION ;
END
Exactly, you have a BEGIN TRANSACTION and a ROLLBACK in error case, but no COMMIT at all.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
ACK/NACK Handling In Biztalk 2010 Orchestration - SFTP send port
Hi,
I am using SFTP adapter and wants to get ACK/NACK in orchestration. I have implemented all the required steps mentioned in the below blog:
http://blogs.msdn.com/b/kevinsmi/archive/2004/07/03/172574.aspx
I am getting the ACKs, but in case of failure I do not get any NACK. Does anyone know how to get it ?
Thanks,
IqraSFTP adapter doesn't have any configuration property to get the acknowledgement.
To get the ack/nack you have to let the BizTalk engine with the property “BTS.AckRequired”
set to true. With Orchestration this property can be set by enabling Delivery Notification
to Transmitted.
The DeliveryFailureNotification is typically only used for one-way send port not for solicit-response port. Following article can guide you on Delivery notification
in Orchestration.
http://kentweare.blogspot.co.uk/2007/11/biztalk-delivery-notification.html
Along with the other obviously settings for delivery notifications in orchestration, also set the
Send-Port’s retry to zero (0). This setting is most overseen by many.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Data recovery service for dead HD
My HD had to be removed (and replaced) after it could not b recognized. does anyone know a good data recovery service that I can send my old one to retrieve client files ( mainly quark, Photoshop and indesign files)
Thanks for any input u can provideDo yourself a favor, and get a good external HD, at least twice the size of the data that is (or was) on your internal HD, and start making backups with Time Machine or another app.
Then the next time this happens (and all hard drives fail, sooner or later), you won't lose everything.
You might want to review the: Time Machine Tutorial
and perhaps browse Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of the +Time Machine+ forum).
Or Kappy's post on Basic Backup, complete with links to the web sites of each product. -
IDOC outbound port - No service for system X, client Y in Integration Direc
Hi all,
We have a problem when sending an IDOC from ECC to XI to Legacy. At ECC, tx SMQS, we got the error "No service for system SAPEQ0, client 400, in Integration Directory".
I don't know what we need to do in ID to provide this service and solve this error...
Our ECC is configured on SLD as EQ0_400 (Logical name EQ0CLNT400), and the scenario was developed at Integration Directory using EQ0_400.
Debugging standard function that send the IDOC, I found that it ever uses the sender port as "SAP" + SY-SYSID... So I'm confusing, is necessary to configure the system in SLD whith this name "SAPEQ0"?
thanks.
robertiGlad to hear that you got it working.
>>"Error occurred during back-routing Error in communication channel".
Can you give some more description about the error?
Hope you have configured a IDOC receiver communication channel poiting to the ECCwith no reciever agreement attached to it.
Regards,
Jai Shankar -
Error: - No service for system port, client in Integration Directory
Hi
In Idoc to File scenario, My Idoc 've been successfully send from the sender system.
but its neither getting displayed in the SXMB_PATH nor saved in the specified path.
I checked in SM58 in R3 that RFC user has access to send data to XI. But it showing below Error:_
ERROR:-
No service for system Sender Port (SAPDEV) client sender client (300 ) in Integration Directory
Please do the needful
Thanks,
AnshulHi Anshul,
Go to:
TCODE SXMB_ADM -> Integration Engine Configuration
Please change the system rile to be "Application System", then retest if the similar issue happen again after that.
If not helped, follow:
1. Clear SLD Delta Cache Referesh in the Integration Directory
2. Open the Business System in edit mode and select Adapter specific identifiers following the menu path:
Service -> Adapter Specific Identifiers
3. Please click in the button next to "Apply" button to pick up the Logical system from SLD.
Regards,
Caio Cagnani
Maybe you are looking for
-
13" Macbook pro random freezing after upgrading hard drive.
i have a 2010 mbp 13" 2.4 I upgraded the hhd from the 250 to a 320 5400 RPM drive i cleared the cache did a clean install of osx 10.6 grabbed all the updates and then rolled my time machine to restore all my files. But now it randomly freezes for abo
-
Can't Open Excel Files in iOS 6
One of my co workers upgraded to the new iOS 6 last week and now they can't open some of the Excel files from their iPhone 4S. I can open the file with no problem, I have iOS 5.1.1 iPhone 4S. iOS 6 can open some of the excel files, but I know it ca
-
To reset using laptop do you use the same cord that you use to charge with USB?
need to reset Ipad. What cord do I use to connect to laptop?
-
Enhancement_CIN_Capture Incoming Excise Invoice-J1IEX bulk data upload
Dear All, Sub:CIN_Capture Incoming Excise Invoice-J1IEX bulk data upload option requirement We are capturing the Incoming excise invoices manually in the transaction J1IEX with huge datau2019s and according to the volume of data it is very difficult
-
Modify the login page (login.jsp) of B2B scenario of the Internet Sales app
All I wanted to modify the login page (login.jsp) of B2B scenario of the Internet Sales application By typing the URL "http://<servername>:50001/b2b/b2b/init.do." I could able to see the login page My requirement is to add an extra link in this page