No "show backdrop" option for liquify in Elements 11

There is no "show backdrop" option in Elements 11. Is there another way to liquify a layer with a visible backdrop as a guide?

Hi,
Try using Recovery Manager to reinstall your Graphics driver as this should also reinstall the associated HDMI Audio out component - see the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01868333&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

    Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine.  But I do not understand why it wont install mac os x 10.5?????  PLEASE HELP ME.  Thanks  Hamid

    Try a new post in the 10.5 Installation forum.
    DALE

  • My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

    My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

    The three Rs to IOS, try them in order until the issue is resolved;
    Restart - Press and hold the Power button until the red Power Off stripe appears. Swipe to power off. Press and hold the Power button to turn the device back on.
    Reset - Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons.
    Restore - Connect the device to the Mac or PC with which it is usualy synced and use the iTunes app to restore the device to the factory settings. You can then restore the device with a previously made backup or set it up as new.

  • Q. Any command-line options for Digimarc and Elements 7 batch file processing?

    Q. Any command-line options for Digimarc and Elements 7 batch file processing?

    Are you a digimarc subscriber? You would be better off asking them, if so.

  • HT4623 I purchased an audiobook in I tunes on my computer, but cannot figure out how to download it on my phone....it always lets me download purchases of movies and tv shows but doesnt show an option for audiobooks

    I purchased an audiobook in I tunes on my computer, but cannot figure out how to download it on my phone....it always lets me download purchases of movies and tv shows but doesnt show an option for audiobooks

    Oh alright -- I manage to resolve my own stupidity quite abruptly, actually.
    Shortly after posting this, I annoying took another gander at iTunes Store settings. To my own idiocy, I must have unchecked "Show iTunes purchases in the cloud" at some point. In my defense, though, the availability of songs in iCloud threw me off quite a lot.
    Ha ha -- anyways, if anyone else is having the same problem, check there.

  • I used to be able to right click on an image, a pop menu would show an option for properties. Where is the properties click option?

    I used to be able to right click on an image, a pop menu would show an option for properties. Where is the properties click option?
    Why did they change the pop-up menu? How can I revert Firefox to previous version?
    == version update

    To get that right-click menu item back use the extension at https://addons.mozilla.org/en-US/firefox/addon/14228/

  • Download Load Option for Adobe Photoshop Elements 11.0 Akamai or Alternate with MS 7

    Which download option do I use if I have 64 bit Micro Soft 7.0 for Adobe Photoshop Elements 11.0: Akamai or Alternate?

    Found this in Download support.
    This helps even more to explain the difference between the two and the WHY you would pick one over the other:
    Start the download by choosing one of the following:
    Click Download and follow the onscreen instructions.
    Click Akamai Download Manager and follow the onscreen instructions.
    If you prefer downloading directly in a browser, click Alternate Download Method. Then click the .7z and .exe files (Windows) or the .dmg file (Mac OS) to download the software to your computer.

  • IPhone4 Dock Connector Not Showing As Option For Sound Output

    Hey All,
    I'm using an iPhone 4 Dock Connector to output sound (via 3.5 mm cable) to a stereo.  This has been working for over 5 months, but all of a sudden it doesn't show up as an option for output from the AirPlay button.
    I tried a friend's 4S and it worked for him.  I also cleaned out the pin connector area on the iPhone as there was a small amount of lint in there (from being in my pocket), but that didn't fix the problem either.
    Any suggestions would be welcomed.
    Thanks!

    Maybe:
    http://www.strayed.co.uk/2013/06/27/how-to-fix-mac-mini-hdmi-audio-output-issue/
    Next try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM

  • Windows 8.1 do not show DISCONNECT option for VPN, why? bug? Please fix!!!

    I created a VPN connection. Once I connected to the VPN in Windows 8.1, it does not show DISCONNECT option when I click on the VPN again. It just keep showing CONNECT option only. Why? This has to be a bug! Please fix!

    Hi Dan5678,
    Is the connection an incoming VPN connection?
    If yes, then you may take a look at the KB article below:
    How to disconnect an incoming VPN connection in Windows 8 and in Windows Server  2012
    To disconnect an incoming VPN connection, follow these steps:
    Open Network Connections. To do this, use either of the following methods:
    Swipe in from the right edge of the screen, or point to the lower-right corner of the screen, and then click Search. Then, type ncpa.cpl, and then click the Ncpa.cpl icon.      
    Press Win+R to open the Run window, type ncpa.cpl,  and then  click
    OK.
    Right-click the incoming VPN connection that you want to disconnect,  and then  click
    Status.
    On the General tab,  click Disconnect. 
    Close Network Connections.
    Hope this may be helpful.
    Regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Boot camp wont show the option for installing via iso file

    version 5.0.2(462)
    the boot camp doesnt show the option to install the windows  via iso file
    i wanna install windows 7 via an iso file
    plz help me as soon as possible

    That option is only available for Macs without a built-in SuperDrive (the MacBook Air, Mid 2011 and newer Mac minis, the Late 2012 iMac, and the MacBook Pro with Retina display).
    If you haven't got one of those computers and Boot Camp Assistant doesn't show the option to install Windows 7 from a ISO file, your Mac doesn't support the Windows installation from a USB because it's restricted by firmware to a Mac without a SuperDrive. In this case, you have to buy Windows 7 on a DVD from eBay or Amazon, and use it to install Windows through Boot Camp.
    If you still wants to install Windows from a ISO file, the only option is to install it on a virtual machine, using an application like Parallels, VMware Fusion or VirtualBox

  • Installed LR 3.2, and export does not show any options for exporting to Smugmug, Facebook etc

    I fresh installed LR 3.2 on a Windows 7 computer to try out tethering (which worked fine), but then tried to export the photos, but I don't have any options for exporting to non-harddrive based locations. The "export to" drop down at the top of the export page only has "hard drive" in it. The plugin manager says that plugins for SmugMug, Facebook, etc are all enabled.
    Anyone have any ideas?
    Thanks!
    Mike

    I found too that the publishing services work differently than the plug-ins.  Not as intuitive, but work well just the same,  For me I had to do the "set-up" for the Facebook publishing service a couple of times.  I think this may have more to do with the Facebook security settings than with LR.

  • AirPort Express Not Showing as Option for Playback

    I have an AirPort Express (new with latest firmware) connected to my Wireless LAN (802.11g). Both of my computers can see it (that is, I can access it from the configuration utility), however, when I load iTunes it will not show as a playback option (pulldown on bottom of iTunes screen) on one computer, unless I first ping the IP of the AirPort. Sometimes this works, sometimes not. Note that iTunes is not loaded on the other computer at the time and I do not have a firewall between the computers on the LAN. I am using WEP encryption, but I've entered the key successfully on both computers and on the AirPort. I've also opened the specified port (5353?) on my router, although that shouldn't matter, as I'm not trying to route outside my LAN.
    As mentioned I have latest AirPort firmware and iTunes upgrades loaded on both Windows XP computers, as well as SP2.
    Ideas or suggestions?
    Various - Mac & Windows XP   Windows XP Pro   Windows XP can't find AirPort
    Various - Mac & Windows XP   Windows XP Pro  

    i assume your airport extreme base station (AEBS) is you main router and you want the airport express (AX) join the network provided by the AEBS.
    you could try this:
    unplug and re-plug the airport express (AX), then click on the airport icon in your menu bar. you should see something like "Apple network bj1234567" or similar (it may take a little while for it to show up). in order to set up the express, you will have to temporarily join its network ! you will get a message asking +do you really want to switch networks ?+ and you do want to do that.
    launch airport utility (AU). you should see the AX on the left. click on the icon of the AX once to highlight it and click continue. follow onscreen instructions and, when prompted, choose to +join an existing network+ and enter the required information for your network.
    any help ?

  • I am trying to re-download some songs I deleted by mistake.  I go to purchases and it only shows me options for Apps and Books, no list for Music.  How can I get the music list to show up or alternatively how can I re-download the songs?

    I messed up and deleted a few songs by mistake.  When I go to the "purchases" option it only lists apps and books that have been downloaded, but music is not an option to see what was downloaded previously.  Anyone know how I can re-download the songs ?
    Thanks for any help!  I am using the most recent version of iTunes.

    I have been having the same problem.. and yes, I am in the US.  I have tried reinsatllin gitunes several time and that doesn't work either

  • Not showing "transfer" option for iPod Shuffle to other computer

    I have two authorized computers-a Windows XP (the first) and a Windows Vista I just authorized with iTunes 8. My iPod Shuffle works with the first computer (the XP) and will connect with it, but with the Vista, it only shows the "erase and sync" and "cancel" options in the pop-up box when I plug it in to my computer. How do I fix this problem?

    If it helps, the computer it is not working on is a Toshiba Satellite.

  • HT1386 when i plug my iphone 4s into my computer is does not show in itunes,  When the menu comes up on my computer for what action I want to take it shows no options for itunes.  My phone worked before, Im not sure why it is not working now??

    I just recently tried to plug my iphone 4s into intunes.  It comes up with the menu of what action do you want to take.  My only options only involve photos and videos nothing to do with syncing or music.  When I open itunes it does not even show my device in itunes.  What do I do??

    uninstall itunes
    you may have to manually delete anything related to itunes in regedit
    reboot and reinstall itunes

Maybe you are looking for