No Signal to Screen - Possible Conflict with MOBO?

I am sooo confused, let me give you the basic problem first.
I am putting a XFX HD 6950 Dual bios GPU into my PC which is a MSI Z77 mPower MOBO with i7 3770k, 16gb ram, seasonic gold 650w modularPSU 120gb m4 ssd with several normal hdds.
Basically I turn the computer on and the screen stays blank, I can hear the computer boot up from the microsoft noises so I know it is turning on, but no signal to the screen. The card works in another setup on a asus mobo with an i5, so I know the card works, and I have put a GTX 780 into this computer so I know the computer works...
I have also tried using the dvi, vga and mini display ports with no success. If I take the GPU out and run off of the onboard graphics it boots up fine. If I leave the onboard graphics connected and put the gpu back in and link it up to a second monitor both screens do not work.
I have updated the Bios to the latest version on the msi website. I have tried to pre install the drivers for the GPU but I cant seem to do that without the card installed, and I cant do that because the screen wont turn on when it is installed.
I have also tried putting it in a different pcie lane and this did not work.
I have tried saying "Oculus Reparo" with a wand in my hand, this does not work.
Any suggestions would be greatly appreciated!

You tried this version? https://forum-en.msi.com/index.php?topic=163872.msg1275786#msg1275786
Try a different monitor?

Similar Messages

MainStage message: possible conflict with third party midi or audio drivers

Just when I thought everything was going to be ok...
MainStage gives me a message that it detects a possible conflict with third party audio or midi drivers. The only midi device I'm using is class compliant (doesn't need a driver). My audio interface is an Apogee Duet and I'm using the most recent driver. Logic registers no such complaint. MainStage freezes. Any ideas?
Thanks,
Mark

Hello.
I am seeing this whenever MIDI events are being sent into either Logic or MainStage (primarily MainStage), while they are launching. On my setup, this will either crash the application during launch, ( sent to Apple ) or trigger this "...3rd party conflict / driver..." dialog.
In either instance, disabling incoming MIDI messages by turning them off on all connected MIDI devices, or as suggested, waiting to connect the device in question until, the application is fully launched, fixes my version of this issue.
** Please Note: In my experience, increasing the number incoming MIDI messages, exacerbates the issue and, makes a dialog or crash more likely to occur.
Hope this is helpful.

Possible confliction with external hard drive?

Hi guys, I'm sort of new here, but I could really use some help.
I love my iPod (30 gig Video), I've had it for just over a year, but last week it all of a sudden started screwing up on me. I'm sorry it's such a lengthy explaination, but I haven't been able to find help anywhere else... If you don't feel like reading it, essentially my iPod seems to be conflicting with my external hard drive.
I keep all my music on a 150gb external hard drive since my laptop's 30 gigs barely has any room left over with all the programs and photos I have on it. iTunes has worked fine in the past with playing/syncing music from an external hard drive but all of a sudden it's decided that iPod and Hard Drive don't mix.
When I have my hard drive plugged in by itself, everything is normal, and iTunes can play the music fine. Though once I plug my iPod in, iTunes and the whole computer freezes up. I get the usual "Do Not Disconnect" message on the iPod, and it seems to be doing something, but everything on the computer just stops. I can click the start menu, I can click the close button on iTunes, nothing happens... UNTIL I unplug my iPod. Then everything unfreezes and whatever buttons I clicked while the screen was frozen do their appropriate action. If I had clicked to close iTunes it would then close iTunes... If I closed iTunes while the iPod is plugged in (which does nothing), then unplug the iPod causing iTunes to actually close, I get a message saying that the iPod needs to be reformatted to work with Windows and I should restore the iPod within iTunes to solve that problem.
At the time, I hadn't tried the iPod alone, without the hard drive plugged in (since I keep the hard drive plugged in all the time), so I figured it was a problem with the iPod, rather than a problem with the hard drive.
So I took the "restore" idea, and went to my friend's computer, which is running Vista. He has iTunes, and his computer is fine. I plug my iPod into it, iTunes opens up, things work great. So the problem didn't seem to be with my iPod. I took the opportunity of having my iPod in a working iTunes environment on my friend's computer, and I restored my iPod, clearing all the songs off of it, which is not really a big deal, since all my songs are on my ext. hard drive anyway. I took my iPod back to my computer, and nothing changed, I still had that problem, and I then realised that the problem only existed while my hard drive was plugged in.
It was after I restored it that I realised if I unplug my hard drive, and have my iPod plugged in alone, everything works fine. It opens up iTunes, it's recognised by My Computer, things are normal, except for the fact that I can't do anything, since all my music is on my ext. hard drive, so I get to look at a whole library of songs with little exclaimation marks beside them. Syncing didn't do anything except transfer the handful of songs from my library that AREN'T located on my external hard drive to my iPod, and of course, once I tried plugging my hard drive in... frozen.
I managed to figure out that if I started iTunes with my hard drive plugged in (so iTunes would know that the songs are in the right location), then unplugged the hard drive, plugged the iPod in (so iTunes would recognise it), then plugged the hard drive back in, things would work alright, though when I tried syncing it, it went painfully slow and stopped after about 3 albums, and this process hasn't worked since, it just freezes up again.
I know I could just copy songs slowly to my computer, and sync them to my iPod from the computer rather than the hard drive, but that would take ages, and I'd like to have the problem fixed rather than to have to go through that process any time I wanted to change what's on my iPod.
So that's my problem. I've followed the "5 R's" that the support here seems to swear by, I have tried unistalling and reinstalling iTunes twice, I've uninstalled both iTunes and the iPod updater stuff, and then installed everything clean from the CD that came with the iPod. I've tried renaming the drive letters of my ext. hard drive and my iPod in case there was some sort of confliction there, nothing seems to have worked. I don't think I changed anything with my computer that would cause this change (I ever restored Windows to a date before this problem occurred), and as for the update to iTunes 7.4.1.2, I didn't update it until after this problem started, so it wouldn't have been caused by the update.
I hope that made sense... If anyone can give me some help as to how I can get my iPod back working on my computer I'd be incredibly grateful and thanks in advance!
If anyone knows what's going on, it's probably somebody here

This sounds like more of a Windows specific iPod problem. You may get better responses if you posted it in that specific section of the forums.

Possible conflict with Acquisition. Pls HELP/COMMENT.

I’m using the latest version 123.3. Somehow it conflicts with SAFARI, ie when Acquisition is on, no webpage can open in Safari.
It gives a 'Safari can’t open the page' error.

Have you tried lowering your upload/download bandwidth limits and the number of concurrent uploads/downloads allowed?
Yang

Possible conflict with iTunes 7 and non-admin account

I've tried burning cd's in my usual windows account (limited) and it comes up with the error message "disc burner or software not found", but when I log into my admin account and try and burn an mp3 then it burns just fine. I wonder if they changed the way version 7 burns cd's...
Any solutuions or fixes?

I'm not really looking for a way to roll it back. I was just hoping to find a fix for the current version, or make them aware that there is a problem with running it in a non-admin account.
Thanks for the info though!

Possible conflict with other cd ripping software.

Since installing iTunes I have not been able to import CD tracks directly into "Cool Edit Pro" nor have I been able to create image files of my cd's with "PowerISO".
Prior to installing iTunes both worked flawlessly.
I have tried un and reinstalling iTunes and subsequently also re-installing "C.E.Pro" and "PowerISO" but can't get either program functioning again.
My Nero software so far still works just fine.
Perhaps iTunes has changed something in the registry affecting these other two programs.
Any suggestions would be greatly appreciated.
cheers
Windows XP Pro 1.67 gig AMD athlonXP, 512mb ram

hi bob!
the following techniques are typically used to get itunes importing again (and are oriented towards that), but they could be applied to the other programs too:
iTunes for Windows: Troubleshooting CD issues caused by device filters
loove, b

Conflict with Third Party Apps?

I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

Hi Midlake,
Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
regards, Erik.

Is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

is it possible to play oBo Word Snake without conflicting with the pulldown notifications screen? If not is there another similar app to get addicted to?

Hi,
There will be a “Post” list in that user’s MySite storing all the blogs that below to that user, we can delete all the blogs in that list if with sufficient permission in that
user’s MySite.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Xorg hang with "No Signal" on screen after incomplete -Syu

Hello everyone.
I had a uptime of ~60 days and decided it was the time to pop -Syu and take a deep breath, this time, it choked me ..
pacman -Syu was downloading almost a Gig of packages and was near the end or just started installing when the screen just got cleared suddently and showed me this ..
1888218888++++++++
Yes, nonsense, something went terribly wrong, and I did not use it meanwhile updating, it was just updating all by itself when this happened..
Afterwards I did another pacman -Syu after a reboot and it installed the last packages but startx gave me a screen without signal (No black screen or anything, just like if it was unplugged) .. The rest of the system is freezed and I cannot reach TTYs by CTRL+ALT+F-keys absolutely no response, not even by network services like SSH.
I now am in doubt, should I do a reinstall of all packages on my system to be sure this is not caused by incomplete installations/upgrades of xorg and it's parts or should I try anything else?
xinit/startx is reacting the same ..
I have not been able to find a similar problem by searching, all refer to the Xorg hotplugging which is disabled in my Xorg which bugged me on the last -Syu ..

UPDATE:
The official NVIDIA driver caused the problem since the "nv" opensource nvidia driver works fine.
[dezza@dezza ~]$ sudo pacman -Qii nvidia
Name : nvidia
Version : 180.22-1
URL : http://www.nvidia.com/
Licenses : custom
Groups : None
Provides : None
Depends On : kernel26>=2.6.28 kernel26<2.6.29 nvidia-utils
Optional Deps : None
Required By : None
Conflicts With : nvidia-96xx nvidia-71xx nvidia-legacy
Replaces : None
Installed Size : 7744,00 K
Packager : Pierre Schmitz <[email protected]>
Architecture : i686
Build Date : 2009-01-12T13:46:07 CET
Install Date : 2009-02-25T13:24:55 CET
Install Reason : Explicitly installed
Install Script : Yes
Description : NVIDIA drivers for kernel26.
Backup Files:
(none)

Each time I connect to my IBM computer it crashes with blue screen error message pops up. Apple say that it's my printer/camera drivers. The problem is with iTunes, it likes to play with all the ports on my comp and conflicts with prnt drivers. How to fix

Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.

When this problem first happened, I searched for threads and found a few. See be;ow links:
http://support.apple.com/kb/TS1502
Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version.

X-fi xtreme gamer fatal1ty conflict with Asus A8N SLI Premium Mobo with Nvidia nForce chip

i have had my x-fi for a few months now and ever since installing it there have been constant system hiccups, blue-screens, and performance locku
ps.
my system was perfect running the audigy 2, but the x-fi is messing everything up.
i have read about the conflicts with the nvidia chipsets and the x-fi drivers and have yet to find a solution. i love the quality of the sound from the card but i cant deal with these issues any longer and am going to return it if there is not some sort of solution.
it seems this problem is well known and has been for quite some time, i cant understand why creative hasnt released a patch for the drivers of the card.
if anyone has any suggestions for me i would really appreciate it so i dont have to yank the card out and return it to newegg.
thanks very much.
-Art

In all seriousness, return the card. Do it NOW because you still have the chance to. Don't wait until it's too late.
Then after that, if you are curious why I say that, do some searches about other issues everyone is having and Creative not being very responsi've.
Search (either here or use Google for external websites) for "ha20x2k.sys" and "BSOD" (or a combination of both). "Crash" and "BF242" or even other games such as WoW and CoH - just be (pun not intended) creative.
Don't be like the others here (like myself), who own a very expensi've paper weight. Sure you can continue to use it for listening to music, but that's like buying a sports car and just being able to use the stereo.Message Edited by naddie on 04-2-200706:54 AM

Possible conflict/problem if using edk 5.2.0 with plumtree portal 5-0-3 and collaboration v4.0.1?

Hi,
We are using plumtree portal v5-0-3 and collaboration v-4.0.1. I have to create a portlet where users can use it to submit a request for a collaboration project to be created. Searching through Plumtree Developer Center, there are documents that show me how to create a collaboration project using edk library. The edk that comes with plumtree portal v5-0-3 doesn't contain the api(s) that I need (for example, com.plumtree.remote.prc.collaboration.project.*). However, the edk 5.2.0 does contain these api(s).
Are there any possible conflicts/problems if I use the edk 5.2.0 with our existing plumtree portal v5-0-3 and collaboration v4.0.1? If there are, is there any other way that I could get to these api(s) somehow to create collaboration projects?
Thank you in advance for helping!

Thank you so much for responding so quickly!
Is there any api or way that I could use to create a collaboration project without using the Project Explorer? In our scenario, after a user uses the portlet that I describe earlier in the original disscussion message to request the creation of a project, an admin will take a look at the request and click a button to have the project created. This button will somehow trigger some scripts or codes instead of the admin using the Project Explorer to create the project.
Thanks again for your help!

Possible Xcelsius conflict with IPv6

Xcelsius and IPv6:
We ran into an interesting issue on a client site this past week. First time implementing an install on a Windows Server 2008.
Environment:
Win Svr 2008
IIS 7
Ipv6 & Ipv4 enabled
BOE 3.1 w/ Xcelsius 2008
The install went flawlessly with the ability to export objects/reports to the enterprise system, etc - with no problems. However, Xcelsius had issue with trying to connect to the CMS when trying to save/export to BOE 3.1 (and ONLY Xcelsius)
We noticed they are running a NIC with IPv4 and IPv6 simultaneously (clearly listing a long hexidecimal IP address labeled IPV6 in IPCONFIG)
So we went into the CMC/CMS properties and there is a box to manually enter an IPv4 and IPv6 IP address, respectively. If you try to enter addresses in both boxes, when you restart the CMS -- it will reset back to the default which automatically obtains the host. Therefore, we entered purely the IPv4 address and restarted the CMS.
First issue resolved. We were able to then hit Enterprise from Xcelsius... until you tried to save. Then it thought the Input FRS was down. So we had to perform the same step for the Input FRS and force it to a static IPv4 address of the server.
Using the host name didn't work (that is the other option in the server properties for each service). I imagine you could play with the host file, but then you may have to do that for each client.
In the end forcing the IPv4 address for the CMS and Input FRS properties did the trick, but it is strange because if you used the defaults -- the publishing wizard, for example, which hits the CMS and the Input FRS when importing objects -- didn't have a single problem. Only Xcelsius appears to conflict with IPv6.
Thoughts? We would have figured it would use the same methods to connect to communicate with enterprise as Crystal Reports client, publishing wizard, etc. However, I did notice in SAP's IPv6 documentation on the Support Portal, that although 3.1 does handle IPv6 -- Desktop Intelligence still does not. Perhaps Xcelsius should be added to that list in the documentation?
This is fine for a server with a static IP, but if for some reason their server is using a dynamic address and relying on the host DNS -- this could be an issue.
Thoughts?

HI,
I've heard this problem before, but I haven't heard of a resolution.
The NI's GPIB driver (NI-488.2) will not work with the Measurement Computing board. Not in LabVIEW 5 or 6. If you are using the GPIB VIs in LabVIEW 5 with the Measurement Computing board is because the MC driver replaced something.
A device driver is a software component that requires detailed knowledge of the hardware it manages. NI's driver is written to control NI's GPIB hardware ONLY. The same applies to the MC driver.
The driver also provides a Language interface, so that you can access the driver's functionality. To program in C, a driver will provide a header file with the function declarations and a dll (or static library). For LabVIEW the driver will provide the V
Is. These VIs are provided by the driver and developed by the driver manufacturer. Most likely these VIs are wrappers for the dll function calls. This mechanism hasn't changed between versions of LabVIEW.
You should contact Measurement Computing. They should be able to troubleshoot the problem, since they know what their driver installs.
DiegoF
National Instruments.

My battery drained. Screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.

My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc. Will a hard restart wipe all that out?

Agree with Richard:
-Your device needs both the CR and LF. To accomplish this:
option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
Details can be seen in this link:
http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
"Adding Termination Characters to VISA Serial Writes in LabVIEW"
Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
If someone find a working link please post it.
Regards

Firefox 25.0.1 Warn when closing multiple tabs (on) conflicts with "show windows und tabs from last time" (on); need both, but only one or the other works.

Using Firefox 25.0.1 on Windows 7 Home Premium
I've poured through support forums for Mozilla Firefox searching for a fix to my initial problem of the "Warn when closing multiple tabs" pop up not popping up when I have it selected.
Went through About:Config, making sure warnings for tabs und closing, und showing on quit, und quitting, etc. were all set to true, which were "possible" fixes for the issue I was having, there are like five or six things set to true for warnings/quitting/etc. No avail. They are all set to true.
Then I stumbled across one that suggested a conflict with the "Warn When Closing Multiple Tabs" und the "Show Windows und Tabs from last time".
I use both features. However, I found if I want the warning pop up for closing multiple tabs, I have to have "show homepage" or "show blank page" selected instead of "Show windows und tabs from last time" selected. (Tools>Options>General>Start Up>When Firefox Starts:) The problem with this is, yes, I get my warning pop up, BUT, I don't get my tabs from my last session.
The warning in settings (Tools>Options>Tabs>Warn Me When Closing Multiple Tabs) is checked.
To have my tabs restored from last session, I simply select it for "when firefox starts". Bam, I have my tabs that were open from the last time I quit. Und again, full circle, I don't have my warning pop up.
There were also suggestions of the warning on close for tabs is conflicting with add-ons.
However, I don't have many. Und I have yet to test them to see if they interfere. These are according to my Add Ons tab when I check it myself.
Extensions:
1. Avast WebRep (disabled)
2. HP Smart Web Printing (disabled)
Plugins:
1. Adobe Acrobat
2. Google Update
3. iTunes Application Detector
4. Java (TM) Platform SE 7 U45
5. Shockwave Flash
6. Shockwave For Director
7. Silverlight Plug-In
8. VLC Web Plugin
9. Windows Live Photo Gallery
10. Java Deployment Toolkit (disabled)
Note: The Details Firefox provides says I have these for Plugins
* Shockwave Flash 11.9 r900
* Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146
* Next Generation Java Plug-in 10.45.2 for Mozilla browsers
* Google Update
* Adobe PDF Plug-In For Firefox and Netscape 11.0.05
* VLC media player Web Plugin 2.1.0
* 5.1.20913.0
* iTunes Detector Plug-in
* NPWLPG
Unsure of what the "5.1.20913.0" und the "NPWLPG" plugins are, but they don't appear to me under Add Ons.
Und as usual, I'm assuming the solution lies within About:Config, I will show here now what I have set to True.
browser.tabs.warnOnClose - True
browser.tabs.warnOnCloseOtherTabs - True
browser.tabs.warnOnOpen - True
browser.warnOnQuit - True
browser.showQuitWarning - True
As aforementioned:
The seemingly only issue is the conflict between Show Windows/Tabs From Last Time und the Warn On Quit pop up. Und again, I need/want both of them. More so the tabs from the last session, but I really really really really really want the warning.
So, if anyone knows a work around, preferably without having to download anything to fix this, I would be extremely grateful.

You mention a second subject.
''I'm probably going to downgrade to another version of firefox that was suggested to me since I'm also having issues with shockwave flash causing firefox to hang und ultimately needs to be force closed otherwise having to have flash disabled to use firefox.''
Downgrading Firefox 
Flash is notorious for causing Firefox problems. I suggest you start a new thread about that. If at all possible you should try to avoid downgrading to an unsecure & unsupported version of Firefox. it will increase risks to your system and Personal data. (There are methods of mitigating the risks, using a virtual machine or operating within a secure intranet for instance)
*(Do Not) [[Install an older version of Firefox]]
Try Flash with Protected Mode Off 
Worth a try as it takes minimal effort & often solves Flash Problems whilst allowing current and more secure FlashPlayer to be used. See
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
* http://forums.adobe.com/thread/1018071#TemporaryWorkaround
If you wish to pursue these subjects further I note you have already started a thread you may as well continue the discussion in that thread, but also post back here so we can follow both.
* ''Firefox is having "Script" issues (Not Responding) und possibly Flash issues?'' [/questions/978181]
** try ensuring you close down Firefox using the menu, that may even help with Flash problems.
Your experience in submitting troubleshooting information on the forum 
(This is out of curiosity, but with the intention of pressing for changes if forum faults are discovered.)
There are yet more changes to this forum underway. Mozilla recently tried to improve the experience for first time users of the forum and a troubleshooting app option was included in the workflow to try to encourage users to submit full troubleshooting information.
I would be interested to know what you thought
I sometimes wonder if users are not trying to use that, or whether forum users run into problems in using it. At one point I wondered whether there was a problem if too much data was included but never actually proved that conjecture.
Assuming you are using the forum, and not merely replying by email look towards the top in the right hand margin for clickable buttons
* Question Details -V- More System Details -> [Additional System Details]
You will note that includes only partial information. There are no changed prefs or extensions listed. Compare for instance the information in this thread [/questions/978130] with full information.
I believe your mystery plugins are Windows related
* NPWLPG relates usually to Windows Live Photo Gallery
* 5.1.20913.0 will be Silverlight

No Signal to Screen - Possible Conflict with MOBO?

Similar Messages

Maybe you are looking for