No sound and USB ports do not work.

Hi I have a HP Compaq SR5013WM I have a red x on the speaker no audio output device is installed I have reinstalled the driver over and over again checked the BIO download from Realtek ALC 888S, R2 57 and knowing has helped the Motherboard ASUS P5LP-LE  Leonite GL8E 2 USB in the front 4 USB in the back any thing i plug in is unknown and will not in stall. PLEASE someone help.

Sorry I forgot to add that i have a Satellite A665-S6086.

Similar Messages

  • Sound and USB ports suddenly not working

    I have HP pavilion dm3-1103au which i bought about 3 years ago.. Everything was worked fine since the first time I use this notebook until about 3 weeks ago when I used it to watch a film suddenly the sound changed to noise sound and then my notebook sound not coming out at all from speaker and headset.. Then I restarted my notebook and then the sound working normally but after a moment the sound stop coming out again..
    I check my sound driver to see any updates but it say my driver are up to date.. Then I go to sound control and test my speakers but it shows a warning that says "the device is being used by another application. Please close any devices that are playing audio to this device and then try again." I dont know what application that is using the sound because it happen when I didnt open any app..
    After about several days later, the problem seems to became worst.. All USB ports suddenly have a problem too.. My USB mouse stop working at random time.. Then I try to insert my flashdisk and sometimes it can be recognized but when I try to copy files to my flashsdisk, it disconnected when the process of copying has not finished..
    when i go to device manager the 'standard openHCD USB Host Controller' have a warning sign.. I check for updates but it says the driver was up to date.. So I try to uninstall it and restart my notebook.. but it didnt solve the problem..
    I have reinstall and upgrade my windows from windows 7 to windows 8 but it still have the same problem and become worst.. now the sound not coming out at all from the speakers and headset from the windows starts.. Please help me.. I have no idea what cause the problems.. I think it's not hardware related..

    Hello lynz00,
    Did you check out this page to see if your computer has been tested by HP with Windows 8, prior to upgrading to Windows 8?  
    HP is not going to support hardware for Windows 8 on any system purchased before Oct 1st 2011.  I realize your issue began prior to upgrading to Windows 8, but don't think the upgrade is the way to fix it.
    Did you backup everything in Windows 7 in order to downgrade, prior to upgrading to Windows 8?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • Audio output and left USB port is not working!

    Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
    What happened?
    Part No.: Z0JH000TE RS

    If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
    The newest BIOS is already installed?
    Have you removed all USB ports from device manager and restarted your notebook?
    If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

  • USB ports does not work

    Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

    What driver have you updated?
    Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
    Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
    Have you done any changes to the system? (for example: self-install OS or changing OS)

  • TS3048 Bluetooth and USB ports aren't working can't connect mouse or keyboard.

    Bluetooth and USB ports aren't working, so am unable to use Imac past turning it on. There's no way to connect mouse or keyboard, it started right after a software update for Maverick (OS X bash Update 1.0 – OS X Mavericks), bluetooth symbol not showing in the task bar at all.    

    Hi SBrwn,
    Thanks for visiting Apple Support Communities.
    The symptom you're describing can be frustrating to troubleshoot as our options are limited. I do suggest resetting the System Management Controller (SMC) if you have not already. This step can help you regain use of USB and Bluetooth.
    Follow these steps to reset the SMC on your iMac:
    Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
    Shut down the computer. [by holding down the power button]
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    You can find these steps and more information at this link:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    All the best,
    Jeremy

  • T420 USB Ports do not work after installing XP

    Hello my office has  been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it.  The issue we are having is that the uSB ports do not work.  I have tried every driver I can find but still no luck, can anyone help?

    hey chris0277,
    could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
    If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • PavillionG​7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!

    Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
    Shawe

    Hi:
    Download and instal both of these drivers and reboot.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405​...
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405​...

  • One of my usb ports in not working

    On  my compaq presario v5000, os xp media center, the bottom usb port is not working. When i plug a thumb drive in, it does not reconize it. The mouse lights up but does not work. It shows up in device manager and says it is working properly. The other port works fine. Just reinstalled windows and the computer is completely up to date with all the service packs etc. Have tried unpluging and restarting to no avail. Have tried updating but says it cannot find a better driver. Please Help. Thank you.

    Could you please give me the exact model number of your notebook?
    You can use the following document if you need assistance in finding it.
    http://goo.gl/GDeRb
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • 1 of my USB ports is not working. Help?

    Suddenly one of my USB ports is not working. No matter what I plug into it, it doesn't work.  Any help or ideas would be appreciated.  Thanks.

    Not in the one that's ailing, but it does in the other one.  I've also plugged in an external USB hard drive and that doesn't connect.  Also a mouse's USB dongle and that doesn't work in the ailing one, but is fine in the other one.
    I've also tried ( a couple of times ) to simple reboot hoping that would jog it, but that doesn't seem to help either.

  • My firewire 800 and USB ports on not functioning!

    My firewire 800 and USB ports on not functioning, I believe it is an issue the next driver loaders anyone, know how I can reset these?

    You don't "reset" a driver (kext).  And I don't believe it s a driver problem.  However you might try doing a smc and pram reset to see if that "shakes the ports loose".  Might work.  Couldn't hurt to try.

  • I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution?

    I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution? someone can help?

    Invoke your warranty and take it back.

  • My Macbook Pro keyboard AND USB keyboard will not work.  However, the trackpad and USB mouse will work.  Any help?

    My Macbook Pro keyboard and USB keyboard will not work.  However, the trackpad and USB mouse will work.  Any help?
    This is quite frustrating, since it randomly occured as I was browsing the web.  It seemed to happen out of nowhere.  I cannot login to my user account because I cannot type my password. 
    Any help will be appreciated.
    -Matt

    If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
    Next, download the 10.5.6 Combo update from here:
    http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
    Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

  • Upgraded to Snow Leopard and USB ports no longer work completely

    Hi!
    So my wife is using my older (from 2007) 15in macbook pro. We just installed Snow Leopard (from Tiger) and the USB ports are no longer functioning correctly.
    Previously, intermittently (between restarts) one of the USB ports wouldn't work well, but restarts always fixed it. This would happen maybe once or twice a month.
    Currently, neither the left or right USB port work well. Both will run a USB mouse and charge an iphone, but neither will recognize the phone or a card reader as plugged in.
    We've tried restarting. Tried turning off, unplugging, removing the battery and holding down the power for 5 seconds and restarting.
    Nothing is working. Does anyone have any tips on how to fix it?
    (The iphone is recognized by my macbook pro, so it's not the wire or the phone, at least as far as we can tell.)
    Thank you kindly in advance.

    I think it's time you upgraded to a newer version of Photoshop.

  • HP Pavilion dv6-6b10tx two of the usb ports are not working

    I have recently bought a HP Pavilion dv6-6b10tx....and had it fixed by hp for a problem with the beeping noise.
    After sending my laptop for repairs( replacing the system board), I received my laptop but two of my usb ports are not functioning...
    I did a bios update and did the hp update to see if it actually fix anything but not luck.  So I went device manager and found a exclamation mark on the renesas electronics usb 3.0 host controller with a device status 'This device cannot start. (Code 10)'.  What do i do??

    The question is why is the port not working?  Is something in the port that you can see?  If not, then there isn't much you can do but take the computer in to the genius bar and have the techs see if it is a circuit problem that can be fixed.

Maybe you are looking for

  • EKET-FIXKZ set after partial goods receipt of subcontract delivery schedule

    Dear all, when booking a partial goods receipt (via MIGO) of the finished product of a subcontract delivery schedule the schedule line becomes fixed (EKET-FIXKZ = 'X'), which hinders the next MRP run to modify the delivery schedule according to the n

  • Tab Canvas on a STACKED Canvas?

    Is it possible to have a tab canvas ON (IN) a stacked canvas? Or can a tab canvas ONLY be placed on a content canvas? Thanks!

  • Want Preview -- but PDFs keeping launching in Acrobat Pro 8

    How do I make sure that whenever I launch a PDF -- whether by opening a PDF on my hard drive or when downloading a PDF in Safari or Firefox -- that it always launches Preview and NEVER launches Acrobat Pro 8. I've selected "Get Info" on a PDF file on

  • Acrobat 8 pro Trust manager not working ?

    Hi I have a problem with version 8 of Adobe Acrobat Pro. Here's a little description of my situation : I have a set of custom Acrobat Plug-ins and VB.NET application using the Acrobat SDK that can be use on a set of PDF documents to automaticaly gene

  • Why do I have to browse all my email contact in the phone app?

    When browsing for a phone number in my contact list from the phone app, why do I have to browse through the 100's of contacts for which I just have an email address with no phone number? Thanks