No sound from tv after laptop connected (G60)

Hi
It is no sound from TV, after i connecting my laptop to tv through hdmi cable on hdmi port 1.
However, the image looks ok.
I open the sound control panel, see NIVDIA HDMI OUTPUT SEEMS WORKING, (SET DEFAULT), BUT THE VOLUME IS VERY LOW, AND NO TEST SOUND COMING OUT FROM TV EITHER.
I tried to set up the audio system in NIVDIA control panle under VIDEO AND TV as instruction in HELP of NIVDIA help manual. But i just cannot find the audio system set up.
anyone can help on this,
Very appreciated!
Tnx
My email is
[text removed for privacy]

Try this, it works on my PC:
Connect HDMI cable to TV.
In the Control Panel, select "Sound" by double-clicking it.
Click the "Playback" tab and look for an icon for your television.
Highlight the TV icon and then select "Set Default". A green checkmark should appear on the TV icon.
You should now hear sound from the TV when your HDMI cable is connected, and sound from your PC when the cable is not connected.
Marty
dm4t i5-430M 4GB-RAM IntelGraphics

Similar Messages

HT2178 No sound from Doom3 after installed from the App store onto my intel iMac

No sound from Doom3 after installed from the App store onto my intel iMac 10.7.3 Any solutions?

Just just launch the Mac App Store, select the "Purchased" tab and download MainStage or any other application you already bought.

No sound from HP G62 laptop and can no longer get sound from speakers or headphone jack . USB sworks

have an HP G62 laptop. I can no longer receive sound from speakers or from headphone jack. If I plug speakers into usb - I will get sound. Any ideas?

I don't think I have anything to offer that you haven't done. In Device Manager, Device status says "working properly" and you've reinstalled this driver.
Realtek Audio Driver for Windows XP
Right?
The only other thing I know to do is restore the hard drive to its original factory fresh contents.
-Jerry

Albums missing from ITunes after laptop switch. Help?

I recently switched laptops and at first, when I logged into ITunes, all my albums were there. But, suddenly, they're gone. Help?

I have almost the same problem. As a workaround, I can check "sync all music" rather than "sync checked music" in iTunes. (By the way, it worked for a couple weeks and now it doesn't). I'm fortunate that all my music fits on my touch (though just barely). The only album that still exists on my ipod (officially anyways) is one that I bought from iTunes after upgrading.
Also, I listen to a lot of podcasts, and I haven't figured out how to make that work (they disappeared too).
Anybody know how to get back to a position where I can decide what I want for music and don't have to put everything on my touch?

No sound from speakers after 10.4.4 update

After doing all the latest updates I'm not getting any sound from the speakers on my powerbook. I can stream music, or listen to sound on my headphones, but not from the speakers. Any ideas?

If you did your update through the software update function, some have found that applying the combo update, which has to be downloaded from Apple, fixes things. Apparently the updates done through the software update function don't always update everything they should, where the combo update is a more thorough update.
You can find the 10.4.4 combo update at http://www.apple.com/support/downloads/macosxupdate1044combo.html and the current 10.4.5 combo update is at http://www.apple.com/support/downloads/macosxupdate1045combo.html

Weak Beats Audio sound from Pavilion X2 Laptop

I purchased a 11" Pavilion x2 Laptop/Tablet for Christmas and believe I am having trouble with the Beats Audio. The sound coming from the computer speakers is so weak as to be useless and all of the settings will not get the sound loud enough to hear unless you put your ear within 4-6 inches of the screen. However the sound from the earphones is great, loud and adjustable. I have performed all updates from Microsoft and HP and followed all troubleshooting steps suggested by HP Web Site. Any ideas or do I just need to return it.

Hello dontom,
For not being able to hear very well from the 11" Pavilion x2, I would like to confirm the troubleshooting steps that you have completed. I have you completed all the steps in this document 'No Sound from Speakers (Windows 8)'? Are you using any special software, or just the volume icon in the system tray? Does it play the same level of audio for all programs and files? (ie. Netflix, YouTube, or music).
Please also let me know the full model number of your X2. I have included the document 'Guide to finding your product number'.
Thank you.
I worked on behalf of HP

No sound from GB over Bluetooth connection

The function to perform sound of Garageband over Bluetooth doesn't work well!
The I-pad settings to play sound over BT are correct.
The pairing with my (bluetooth) VOIIS gateway was succesful.
Music (sound) from my I-Pad (i.e. Music APP) is transmitted correct to my amplifier through this device.
The special setting in Garageband have been done ( sound over Bluetoorth/HDMI)
however the sound of Garageband over Bluetooth is not transmitted to my BT device.
Without Bluetooth setting it is working well (sound from I-pad speakers (i should say squeeckers ))

The problem is solved!
I did what you suggest a couple of times, but i had no luck.
What might have somehow fixed the problem: I opened iWeb, and then previewed a GB song to import. It played great.
Then I opened GB and everything worked...
Strange.
Thank you all for your help anyway!

Getting no sound from TV after connecting Macair via mini DP to HDMI port....pls help

I've tried connecting my 2011 Macair to my LED tv via mini DP to HDMI port. The video works fine but there is no sound. I tried opening network preferences and went to the sound section but it does not show my TV to be selected as an output option. Please help!!!!!!

Did you try on another device, like a computer monitor? To verify the problem is not with the adapter or cable.
Off course you switched on the external screen using WinKey+P?

No sound from speaker after upgrading?

I just upgraded my iBook Clamshell 466 SE Graphite with more memory and a new 60GB 7200 RPM Hitachi hardrive. I also upgraded from Panther to Tiger with a Black Retail DVD.
First, I installed the memory and then the following day, I installed the hardrive and OS.
After installing the hardrive myself (30+ steps with the ifixit.com instructions) and installing Tiger, I no longer have sound through the mono speaker although it was working perfectly before. It took me about an hour to carefully and meticulously disassemble and reassemble my laptop while removing tabs, screws, cables, etc. and being organized about it.
I'm not sure why I no longer have speaker sound but the headphone jack still works with sound. I double checked that the speaker cable was properly connected on both ends. I don't think it's a ciruit board issue since sound is still being delivered through the headphone jack.
Is there a way to run some sort of diagnosis as to my sound problem? How do I check my firmware version and is it possible that I need to update? I appreciate any help in advance...

I always try to leave the speaker cable connected to the logicboard (as well as the HD cable) during the installation of the new HD - simply remove the adhesive foil and let it slip through the hole in the EMI shield.
Otherwise you have to wrench at the cable to come out, and that might be the problem.
For testing purposes, try to connect a set of earphones with bare cable heads to the end of the cable or directly to the solder joints of the integrated speaker.

Lenovo G550: screeching sound from inside the laptop

Hi,
Since recently, my G550 started producing a loud screeching noise. It happens occasionally, and the sound is like a loud squeak. The laptop was collected from me and sent to the local service centre, but after having it back I can still hear the same loud noise. Has anyone come accross this before? Service centre people suggested it could be the fan problem, but found nothing and assured me it should work fine, but it doesn't.. Please help me with advice, do you think it is something to do with a harddrive and can it lead to something more serious in terms of the functionality???
Thanks in advance.

Hi @tylerj13 ,
Welcome to the HP Forums!
It is a fantastic place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that while using your notebook you are hearing a popping sound that is not from the internal speaker but coming from the upper right side where the hard drive is located. You read another post with this issue and it was the hard drive.
Here is a link to HP Notebook PCs - Testing for Hardware Failures (Windows 8) to assist you with testing the hard drive and hardware.
You can also check the manufacturer's site of the hard drive for their diagnostics tools for more extensive testing of the drive.
Have you ran the HP Support Assistant to aid with updates and resolving difficulties?
Have you ran the Windows troubleshooter?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

OS X 10.8.5: no sound from DisplayPort after Wake up

Hi,
I have problem with my macbook pro 13" mid 2012 with Mountain Lion 10.8.5. When I turn laptop on everything works just fine but after sleep and wake upthere is no sound coming from displayport. I'm using HP ZR2440W as my desktop display and classic mini-displayport to Displayport cable. Few weeks lbefore there is no problem with this. Anyone with same problem? Any tips to fix this?

Apple preparing 'supplemental' update for OS X 10.8.5

How to get sound from phone when bluetooth connected

Easily paired my Plantronic bluetooth headset - piece of cake. However, if I'm not on the phone, I don't keep it on my ear. Sounds, except phone ringing, only come thru the headset whe it is on. I would like to hear the other sounds (i.e. notifications, text message alerts, other alerts) from the phone when my bluetooth headset is connected. It would be a pain to have to turn the headset on/off just to hear anything from the phone. I actually missed a meeting as the phone made no noise for my calendar reminder.
I would like the option of routing the tones/alert sounds to either phone or headset or just have it automatically do both.
Thanks
lawashbu

Im afraid that disconnecting your blue tooth devise would be the only answer to your problem im afraid that is the only way
Hope this helped
Freddie

Cant get any sound from my hp laptop, running windows 7 home prem.

the silence is numbing
{Private Information Removed From Title}

Get your Product Number by pressing Fn + Esc key or check the Service Tag attached to bottom, may be under battery.
Go to the link below.Enter your Product Number .After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Dell E6520 IDT 92HD90BXX - no sound from speakers after update

After recent kernel upgrade speakers in my laptop stopped working (only headphones output works).
I had been using ALSA.
I switched to OSS to bring the speakers back and it works.
I'm fine with OSS unless all of my apps recognize and work with it flawlessly.
(Internal mic however works neither with ALSA nor with OSS :-( )
Searching the net I found that it's an overall problem with this piece of hardware. (UBUNTU bug-reports)
I need the mic so where should I start poking. (Tried everything in alsamixer)
When I try to record sound I can hear only slight noise.
Maybe the driver doesn't support internal mic or assumes it's a line-in?
Why did it stop working with ALSA?
On reporting a bug what data should I provide?
Last edited by Heikete (2013-03-25 06:19:12)

try repairing permissions, restsrt and "fiddle" with
settings in sound prefs
What do you mean by "fiddle"? I uplugged my Apple Pro speakers last week so I could boot my computer without waking up everyone - it was early. When I plugged them back in they are not recognized. I tried zapping and some of the other suggestions I've seen here but nothing works.

HT204291 No sound from tv after mirroring ipad2

After mirroring Ipad2 with HDTV, there's no audio. I've changed the audio setting on Apple TV from Auto to 16 bit but no audio still.

Hi MillieR,
The links below will provide general information about how to use AirPlay Mirroring
If you hold down the OPT key and click on the sound icon on the menu bar, you will see the Sound Preferences
Select Apple TV-AirPlay in the Sound Output settings
iOS: How to use AirPlay Mirroring
http://support.apple.com/kb/HT5209
AppleTV Support
http://www.apple.com/support/appletv/
Hope this information helps!
- Judy

No sound from tv after laptop connected (G60)

Similar Messages

Maybe you are looking for